Stable Releases
Bug reports for stable releases.
2506 reports in this category
-
Ok, this has been happening for some time but I have been messing with dockers a fair amount recently and it has been really annoying. Basically I have ~75 dockers installed right now (although only about 15-20 are running under most circumstances). It seems there is some kind of script or memory hole that causes firefox to lock up from time to time whenever I have the docker tab open for an extended time (it has also happened on the user scripts tab when running a long s
- Minor
- 942 views
-
Unraid 6.9.2 To recreate: Edit or create a Docker container Click "Add another Path, Port, Variable, Label or Device" Change Config Type from Path to Port Change again from Port to Variable "Value" field is now limited to numbers only. If you close the dialog and try again, but go straight from Path to Variable, the issue does not occur. This isn't the end of the world and it's not blocking anything, but it left me confused for a few
- Annoyance
- 756 views
-
- 7 views
-
Whenever I try to load the VM tab, the System timeouts: Jul 21 08:08:20 HP nginx: 2021/07/21 08:08:20 [error] 4948#4948: *177148 upstream timed out (110: Connection timed out) while reading upstream, client: 192.168.0.100, server: , request: "GET /VMs HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "192.168.0.200", referrer: "http://192.168.0.200/Dashboard" Reproducable without Plugins (safe mode), docker or anything else. The VMs start on au
- Minor
- 725 views
-
So I noticed that a user share drive listing (used for computing share size) includes pools that are set to not participate in user shares, when they happen to have the same top level folder name as those other shares. This leads to incorrect size calculations. Note that the folder itself however does not appear in the SMB user share (as expected), and so this is more of a cosmetic issue that also impacts utilization calculations, rather than a functional problem with user share
- Minor
- 584 views
-
这个错误是什么，如何解决 7月21日21:59:22 UNRAID nginx:2021/07/21 21:59:22[错误] 4488#4488: *800817 recv()代理升级连接时失败(104:连接被对等方重置)，客户端:192.168.0.240，服务器:，请求:“GET //wsproxy/5701/ HTTP/1.1”，上游:“http://127.0.0。 请求:“GET/登录HTTP/1.1”，主机:“192 . 168 . 0 . 144”7月21日21:59:25 unlaid nginx:2021/07/21 21:59:25[错误] 4488#4488: *800670限制请求，超出部分:20.598按区域“authlimit”，客户端:192.168.0.240，服务器:，请求:“GET/登录HTTP/ 请求:“GET /login HTTP/1.1”，主机:“192 . 168 . 0 . 144”7月21日21:59:25 unlaid nginx:2021/07/21 21:59:25[错误] 4488#4488: *800859限制请求
- Minor
- 483 views
-
An error occurred in the system log ul 12 03:49:29 UNRAID emhttpd: error: get_key_info, 579: Invalid argument (22): get_message: /boot/config/BTRS.key (-3) Jul 12 03:49:30 UNRAID emhttpd: error: get_key_info, 579: Invalid argument (22): get_message: /boot/config/BTRS.key (-3) Jul 12 03:49:31 UNRAID emhttpd: error: get_key_info, 579: Invalid argument (22): get_message: /boot/config/BTRS.key (-3) Jul 12 03:49:32 UNRAID emhttpd: error: get_key_info, 579: Invalid argument (22): get_message: /bo
- Closed
- 1256 views
-
so i recently doing testing of unraid having issues.. and when you using the usb creator there is a bug in it you can not use it without internet.. my internet pass's through unraid first .. as i wanted to burn the ZIP file to the USB... but your not able to choose it unless you have internet.. it should be fixed that when you have no internet you can use the software for Local Zip file.. but you can see its grayed out once no internet is detected and
- Minor
- 686 views
-
When stopping and restarting the array, VMs with autostart enabled will not start back up. Only dockers do. When rebooting the server they start up. Diagnostics from power up > array down > array up. unas-diagnostics-20210719-1422.zip
- Annoyance
- 837 views
-
Hello all, I experienced like many others that the WSDD task pulls one core zu 100% randomly. I found out that this only happens, when I planed a schedule inside user scripts. Its reproduceable. It takes 2 schedules in order (over 2 days) to trigger wsdd 100% bug. Is that helpful? Martin
- Annoyance
- 486 views
-
Hello, unfortunately I have a problem what makes me crazy, my unraid crashes again and again. Sometimes it runs for 10 days sometimes only a few hours. Today it crashed twice. on 6.9.0-RC2 everything ran stable, about 30 days uptime. The syslog is from the crash this morning, the photo from the crash this evening. Unfortunately I can not see the crash in the syslog, but thankfully it is on the monitor. Hardware: CPU: Intel Pentium Silber J5040 Mainboard: ASRock J50
- Solved
- Urgent
- 5182 views
-
Hi, As we previously discussed in this topic, I noticed that if the mover is running, transferring a file from the cache drive to the array, and the system receives a shutdown command, unRaid will not be able to move the file that was being transferred anymore. In fact, after rebooting, part of the file is in the array, meaning the mover will not retry to transfer the actual file that is in the cache drive. A manual fix is to manually delete the partial file on the a
- Minor
- 860 views
-
Issue: Mover keeps moving files from cache to disk1 (the one with the least amount of space) even if manually copying files from cache -> user0 locates it disk5 (the one with the most amount of disk space) So I have the this structure /mnt/user/Media/Anime/... spnning all the disks with the share config above I tried to manually simulate the mover (by reading the mover script and executing the move command with debug level 2 find /mnt/cache/Media/Anime -depth |
- Minor
- 529 views
-
If i manually save the smart controller type for one drive of the array, each time i set it on the next one, the controller type on the one before resets to default. I alrady klickt on the "standard" button to reset all values and tried again. For my hdd's i can use: SAT & HP CCIS As i stated, i just upgraded from 6.9-rc2 to Stable. Before the Update i was able to save the settings. thebeast-diagnostics-20210302-1159.zip *
- Minor
- 1626 views
-
the connection speed between intel X550 and broadcom 8125b is 1G, not 2.5G figure.docx
- Minor
- 626 views
-
I have two 2 TB disks running in RAID 0 on my Adaptec Controller. I can get the SMART data using: smartctl -a -d aacraid,0,0,12 /dev/sdi smartctl -a -d aacraid,0,0,13 /dev/sdi It would be nice being able to enter both in the "Disk Settings / SMART controller type", and also having a SMART check done on both disks
- Annoyance
- 783 views
-
If I set these values and hit Apply the values are set back to the default values: Warning disk temperature threshold Critical disk temperature threshold The disks in question are M.2 NVMe devices running in single disk XFS pools. I tried to set these values to 60/65 celsius. After hitting Apply these values go back to 45/55 celsius.
- Solved
- Minor
- 8579 views
-
I have a ACR-71605 16-port raid controller. In "Disk Settings / SMART controller type" the 3rd entry I need to enter in the disk index (0/0/X) is not possible as the UI only supports range 0-7 (8-port device), so I cannot enter 15 which I need. This bug may have also been there before, but I just noticed this now due to more disks on the controller. Entering 15 manually in smart-one.cfg caused severe UI problems. This should be a trivial fix I assume.
- Urgent
- 497 views
-
Hi, my SATA is called: Samsung_SSD_860_EVO_M.2_1TB_S5GENJ0N800730D when I go to the disk settings and set Warning and critical temperatures, it is seemingly not saved or applied. When I examine smart-one.cfg, I see the entry as follows: [Samsung_SSD_860_EVO_M_2_1TB_S5GENJ0N800730D] hotTemp="75" maxTemp="80" As you can see, the . in M.2 has been replaced by an underscore. If I edit smart-one.cfg and change it to: [Sa
- Closed
- 523 views
-
Due to overheating issues, my data disk rebuild is pausing (using Parity Check Tuning) when drives get too hot. * At 00:21 this morning, the rebuild was paused due to heat at 57.7% complete * At 00:30 the normally scheduled parity check was initiated by the scheduler * At 00:35 the parity check (which does seem to be rebuilding the data) paused again due to temperatures, now at 0.4% complete. Screenshots of the Pushover notifications showing this:
- Minor
- 414 views
-
(Originally posted for support) The Parity-Sync/Data-Rebuild button text toggles between "Pause" and "Resume", depending on the state of the currently running parity check. Using the Parity Check Tuning parameters, I have my parity check (actually a data rebuild in this case) set to pause on reaching the warning temperature and resume when dropping 2 degrees. Unfortunately, my new disk that's having the data rebuilt onto it is getting quite rather hot, so it t
- Annoyance
- 958 views
-
Hello guys, The problem: I have some docker containers that I configured on br0 and gave them a new IP in my network(different then UnRaid's IP) They work fine but unfortunately they don't even have ping to UnRaid's IP (bridge). It seems the other way around is also true. I cannot ping a docker container with br0 IP from UnRaid. Needless to say ping is not the problem itself but the fact that there are no connections between them. The issue: You c
- Minor
- 5616 views
-
When creating a new share, the copy-on-write field is greyed out if "Use cache pool" is set to No, even with btrfs disks in the array. If the description is correct "This setting has no effect on non-btrfs file systems. Set to Auto for normal operation, meaning COW will be in effect on devices formatted with btrfs." having the COW field active when adding an array only share, whether it's btrfs or xfs should still be safe and give us the extra flexibility, right?
- Minor
- 487 views
-
It seems there is a bug which breaks the spin down if a slot is not used. After re-assigning all disks through New Config without leaving empty disk slots, the spin down works as expected. before (only the parity disk spins down, disk slots 5, 7 and 9 is empty): after (all disks spin down, no empty slots): Why I left them empty: I planned to extend some shares by adding new disks without putting them on the bottom. So it was only a "visual thing" f
- Minor
- 1206 views
-
Hey, sorry for not understanding what is happening here but I have noticed in the last few weeks that my Unraid instance running on HP Microserver Gen 8 has been randomly crashing. Every few days or so. This first started after upgrading the processor from stock intel celeron to Xeon E3-1220L V2, but it might have been just a coincidence. I have enabled syslog storage to USB and am attaching it here (the last day of it - the crash happened around 17:35 ish together with
- Urgent
- 1022 views
