Stable Releases
Bug reports for stable releases.
2506 reports in this category
-
Steps to reproduce: Ubuntu: - sudo mount myiso.iso -t iso9660 test - ls test/Photos Results: Same is on unraid side: - mount /mnt/disk4/test/myiso.iso -t iso9660 /mnt/disks/test/ - ls test/photos (no uppercase 'P') also used GUI for that (Add iso file share). How I should mount it properly - i want to preserve long names of files? EDIT: I'm using unraid 6.9.2
- Annoyance
- 2570 views
-
Then first VM in the VM tab is always forced to show the disks Why disks devices is not hidden by default?
- Closed
- 1064 views
-
Upgraded my test box to 6.8.0 stable this morning and am now unable to decrypt the array (using the same passphrase as I've used for the last year!). I experienced exactly the same issue with rc4 (see here and screenshot). If I roll back to 6.7.X - everything goes back to being fully functional. TIA, Nate
- Solved
- Minor
- 13567 views
-
Hello to @ich777 and the unraid community. I am new to unraid and just recently built a NAS with an Intel i5-11500 (LGA1200) with UHD Graphics 750. An HDMI monitor is connected to I/O motherboard panel. I run unraid 6.9.2 and start in UEFI mode. Everything runs fine with the "remote web GUI" and using "My unraid server". I'd like to use the boot GUI mode directly on the NAS to obtain a token to link rclone to my cloud. I have gone on the forum through several topics
- Solved
- 3216 views
-
Noticed this for awhile, there seem to be some unrelated lines showing up in disk log for drive name /dev/sdd. drives with names other than /dev/sdd are grepping their lines correctly. Here's an excerpt of the log of /dev/sdd on my system Jun 9 10:29:24 cs-nas kernel: ata5: SATA max UDMA/133 abar m2048@0xef84b000 port 0xef84b300 irq 133 Jun 9 10:29:24 cs-nas kernel: ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Jun 9 10:29:24 cs-nas kernel: ata5.00: ATA-9: SSD 512
- Annoyance
- 426 views
-
I have a computer running unraid 6.9.2 with 3 video cards and running 3 VMs each with its own dedicated video card. I made sure by pcie_acs_override=downstream that there are 3 different IOMMU groups. Now I have the problem that the first video card responds slowly, so this VM can't actually be used for the application we need it for. Error Message: Failed to mmap 0000:01:00.0 BAR 3. Performance may be slow. Can someone help me to solve this so that we can als
- Closed
- 756 views
-
Before installing My Servers Plugin my server can be accessed with a simple IP like 192.168.1.89 After My Servers installation, all adresses was changed like : https://533f1f13e51371f62b2a6d6556XXXXXXX840550.unraid.net/Apps or https://533f1f13e51371f62b2a6d6556XXXXXXXX840550.unraid.net/Dashboard I'v removed this plugin after unregistered the server. After a reboot, the compmlicated adresses are still here (https://533f1f13e51371f62b2a6d6556XXXXX840550.unraid.net/Das
- Annoyance
- 534 views
-
new to unraid, and this is my first post, so take it easy on me lol. Please forgive any weird typos since I am doing this from my phone and autocorrect is funny sometimes. Recently I moved from a power edge server to a custom built computer because I needed a quieter setup in my home office. On the new computer, it runs a parity check for about 90 minutes, then stays up for maybe half an hour. Every time I check on it, the array is down and it says “Unclean shutdown”. I have searc
- Closed
- 596 views
-
Hopefully this will help someone else out as it drove me nuts. I have 2 unraid servers both with solarflare SFN5122F nics.. well after pulling everything one by one these ended up being the issue on any of the 6.9.x versions. tower-diagnostics-20210606-1308.zip
- Minor
- 627 views
-
Hello folks! I have an issue quite long time now. Well, since I installed the 6.9.1 release. The problem is that all help banners are displayed on a specific device. Note that I do not click on the help button. It's showing every time I access the Unraid interface. I'm also using the Unraid interface on a macbook pro and a HP laptop but I'm nont facing this issue. I've tried to clear my browsing data (cache, cookies, etc...), disabling all my blocking extensions (brav
- Solved
- Annoyance
- 964 views
-
When the UPS model is BK650M2-CH, it will show that the battery is in use after the configuration is completed, and it is normal only if the nut plug-in is used
- Annoyance
- 1139 views
-
I recently installed unraid 6.9.2 and my VM's startes to crash randomly while playing games or watching movies. I thought it was just the display going but no the VM freezers up. The issue is not present on unraid 6.8.3. Fix this bug quickly so that I can update.
- Urgent
- 522 views
-
This one has been around for a while (possibly longer than 6.7, I just think that was when I first noticed it) so it may have been reported already. I leave the dashboard open a lot of the time just for general monitoring. When navigating to another page after it's been left idle for some time, there will be a large spike in CPU usage (on the client machine), and a big drop in memory usage. I haven't charted this, but the affect is noticeable after about a an hour; o
- Minor
- 836 views
-
I use unraid Samba Shares, VMs and a few Docker Container. I don't installed or edited new ones since... a couple of months. After rebooting, the array starts without mounting any Share, without starting docker and libvrt services. The Diagnostics shows the FTP Access to my Share "Camera" before the array is started, which probably blocks the array of starting correctly. I used the camera since day one, and I only got this problem since I updated from 6.8.x to 6.9
- Minor
- 400 views
-
Upgraded from 6.8.2 to 6.9.2 and my 10gb nic no longer works. In the log ixgbe is spamming errors: Apr 13 01:56:35 unraidserver kernel: ixgbe 0000:07:00.0: Warning firmware error detected FWSM: 0x00000000 Apr 13 01:56:36 unraidserver kernel: ixgbe 0000:07:00.1: Warning firmware error detected FWSM: 0x00000000 The nic was working prior to the upgrade. It's an Intel X520-T2 but is reported through lspci as an 82599 (which shouldn't matter).
- Urgent
- 5837 views
-
Hello, i have replaced my faulty parity drive with a new SSD. Now I can not start the array because unraid says: "Disk in parity slot is not biggest." I have checked the new drive and my second parity drive for "HPA" and size but there is no diffrence. root@Tower:~# hdparm -N /dev/sde /dev/sde: max sectors = 3907029168/3907029168, ACCESSIBLE MAX ADDRESS disabled root@Tower:~# hdparm -N /dev/sdo /dev/sdo: max sectors = 3907029168/3907029168, HPA is disabled
- Solved
- Minor
- 603 views
-
When updating to 6.9, unraid no longer detects any of my drives on my rr3740a. Everything was working great before. When downgrading, everything is back.
- Urgent
- 1592 views
-
After updating to 6.9.0 all the drives on my second LSI SAS2308 dont show up and are missing they appear in bios on the controler and after downgrading back to 6.8.3 they all showed up again. i have done several reboots and cold starts and the same thing happens. [6.9.0] asgard-diagnostics-20210304-0032.zip [6.9.1] just updated to [6.9.1] and same issues mppt3sas max_queue_depth=10000 was already set [6.9.1]asgar
- Urgent
- 4292 views
-
After updating from 6.9.0-rc2 to 6.9.1 my RTL8125B nic wouldnt show up. in 6.9.0-rc2 i had no problem with it. [10ec:8125] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 04)
- Closed
- 1342 views
-
Since updating to 6.9.2 my Unraid server unjoined the Active Directory domain and is unable to join back. I tired to re-add it with the computer object still in AD (didn't work), than I deleted the computer object in AD and tried again (still didn't work). vault-diagnostics-20210521-0946.zip
- Urgent
- 617 views
-
i trying to disable some SMART attribute notifications on 2 cache devices but it's not disabled en my telegram bot is still spamming me with smart notifications... to reproduce: 1. under main > device (in my cage "cache") > SMART Settings > SMART attribute notifications: 2. disable one or more of the attribute 3. hit apply, and the page is refreshing. after refresh the attribute is disabled. 4. go to "cache 2" 5. disable the same thing (or something
- Annoyance
- 1347 views
-
It appears that if the Minimum Free Space value for a share is larger than the Minimum Free Space value for a pool then the Share value takes precedence when deciding whether to place new files on the cache/pool or directly to the array. I would have thought these settings should be independent? If you have set a largish value on the share to avoid array disks getting very full this behaviour can lead to the cache/pool often unexpectedly not being used even when the free space on the cache/po
- Minor
- 1176 views
-
I've set up an Unraid VM according to this documentation: https://wiki.unraid.net/Manual/VM_Guest_Support#Unraid During this process the "Slackware" template is being used. The default settings for the <clock> element in this template is this: <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> Immediately aft
- Minor
- 953 views
-
Hi, I recently noticed that quite often my Unraid shows a high shfs usage of over 100%. This slows down file access over the network considerably. I have stopped all dockers and VMs but that didn't stop the behaviour. Only when stopping the array didn't the process stop. I have attached my diagnostics for further evaluation. zeronas-diagnostics-20210318-1010 (1).zip
- Minor
- 911 views
-
Edit: to fix this for 6.8.3, follow this solution: Link see also: The docker UI page shows all dockers with "Version = unavailable" ....manual "check for updates" button has no effect. Normal operation is not affected. though...all dockers and other services are working fine so far. alarm-diagnostics-20210514-1922.zip Edit: problem has been identified: ...but AFAIU a fix needs manual intervention or an upgrade to 6.9.2, which I think is not a requi
- Annoyance
- 1323 views
