Stable Releases
Bug reports for stable releases.
2506 reports in this category
-
On the third picture, I toggled the help button.
- Solved
- 839 views
-
If I add a VM or edit an existing VM my credentials (e.g. root user and root password) are set in the two entryfields: root user --> Unraid Share root password --> VNC Password I'm running Chrome.
- Annoyance
- 511 views
-
I have the problem that my Cache Pools stays active (green) permanently. It is not possible to send them in standby with the spin down function. This worked perfectly in 6.8.3, even with the timer. My Idle power consumption is higher since I have some more SATA and NVME SSDs all without standby. Is there a way to fix this?
- Minor
- 1196 views
-
Disk usage is showing the correct color bars, but the alerts for the usage do not work unless I set the threshold for each disk individually. nateflix-diagnostics-20210315-2056.zip
- Minor
- 559 views
-
Hi, I have a little problem with the last update. I use the Update Assistant to be sure... I updated from 6.8.3 to 6.9 and my server was restarting in a loop /bzimage...ok /bzroot...ok and reboot non stop. Any idea ? Thank,
- Solved
- Minor
- 3493 views
-
After changing it to Disable, the Apply button stays inactive.
- Solved
- Minor
- 735 views
-
Hello, I have upgraded to 6.9.1 a few days ago and everything seemed to be working okay so far. However, I noticed that my 'memory log' was at 100% today. (This bar was red at 100%) I rebooted my server and since then I am facing errors regarding one of my array-disks: Mar 15 11:34:35 Server kernel: XFS (dm-2): Metadata corruption detected at xfs_dinode_verify+0xa3/0x581 [xfs], inode 0x3112d7016 dinode Mar 15 11:34:35 Server kernel: XFS (
- Solved
- Urgent
- 3974 views
-
I had a sweat ridden hour and a half. Thought I would share my experience and resolution. I saw that there was an update for 6.9.1. this morning so I thought I would update. My previous experience has always been good so I didn't make a backup before updating. I pushed the update and rebooted and I lost network connectivity. UGH What ultimately fixed it was deleting the network.cfg config file and rebooting. Well I didn't actually delete it....I just renamed
- Minor
- 558 views
-
Hello, I would like to make a docker container of mine also available via IPv6 to the outside world. For that I need a my unraid system to have a static IPv6 suffix since my prefix is assigned from my provider. In my router I then need to set the IPv6 suffix for which the ports should be opened. Normally that suffix should be fixed on a server like this but it isn't since everytime I reboot or reconfigure unraids network settings a new IPv6 address is assigned to my un
- Minor
- 3075 views
-
If you add a VNC password to a VM and edit the VM later, the password gets deleted. In addition, the user is not able to check if already a password exists. I think it should be changed to something similar as follows:
- Minor
- 1954 views
-
Hi, I have a system that refuses to connect to a VM after the 6.9.1 update does any one have a this kind of error message noVNC?
- Closed
- Annoyance
- 3578 views
-
After some runtime the Web GUI didnt work proper. The Dashboard, Settings usw. banner work but in example the Settings you cannot click anything. I would like to give you a Diagnostics Report but i cannot click on it. In the Pictue you can see there is no way to click on anything. This only happens when the System is running a day or so. After a Restart its working for a couple of hours. Testet different Browsers like Chrome, Edge, Firefox. Hope you can fix thi
- Solved
- Urgent
- 1556 views
-
Repro: - Visit WebInterface - Create new pool - Delete that new pool Expected: Pool is deleted. Result: No error appears, but the pool is still existing. Peeking at the log reveals the following error: I'm using the trial to determine if this product is suited for my needs - can I delete these pools from the cmdline instead of waiting for a fix?
- Annoyance
- 691 views
-
I run a ZFS Pool mounted to /mnt/gaochan on which I store all VMs and Docker Containers. Post-update, this pool is fully detected and functional, and no errors are being logged in relation to the startup of Docker. Furthermore the docker.img image seems to be correctly detected (= not in red) in the settings. The following is a screenshot of my Docker settings: I quickly took a look at any mention of docker in the diagnostics but the docker.txt log is blank and there does not s
- Minor
- 691 views
-
Before the most recent updates I was able to set my docker container appdata folder to an unassigned and non share drive such as "/mnt/disks/docker storage/appdata" now after updating docker services fails to start with the appdata directory field in red. If i click on the field the drop down no longer lists disks only shares. the docker img. folder still allows to select unassigned disks. i believe this to be a bug. please restore the ability to set docker appdata folder to unassigned/ non shar
- Minor
- 1759 views
-
I know the Kernel Panics are a different issue. If anyone has the ability to help with that, see this thread below But after 2 different kernel panics on 6.9.0, the server comes back up and the host access on docker is still marked as enabled but doesn't work until I stop docker, and start it again, and then the communication works again. Not sure if this was present in 6.8.x as I never had Kernel Panics back then, only getting them now on 6.9.0 Again, if
- Minor
- 663 views
-
Tools -> System Log after a reboot doesn't display the very first syslog entries. Please increase the buffer size. This is only a GUI display issue.
- Solved
- Annoyance
- 1117 views
-
I updated to 6.9.0, and now when I go to start Docker (having stopped it to install the Nvidia plugin, ala what SpaceInvader told me to do), all that happens is the Docker vDisk Location field goes red, despite the contents ending in .img "/mnt/cache/Docker/docker4.img". I haven't changed any of the settings. Any ideas? I'm hoping this is a stupid typo, but right now it is immensely frustrating. Edit: to add, I have tried in multiple browsers, same issue. Nothing is logged when I cli
- Minor
- 2523 views
-
ADD POOL using unformatted disks (blkdiscarded SSD's) fails with the following error messages: A 2 device pool emhttpd: /mnt/test mount error: No pool uuid A 1 device pool emhttpd: /mnt/test mount error: Unsupported partition layout The workaround is to preformat the drives using Unassigned Devices Tested in Safe Mode, with the disks connected to on-board Intel controllers. Diagnostics - Create Pool Tests.zip
- Solved
- Minor
- 872 views
-
Attempting to start bash shells in specific directories under tmux fails. Upon investigating it seems these lines in /etc/profile have cause all login shells to forcibly open in /root # limetech - modified for unRAID 'no users' environment export HOME=/root cd $HOME This didn't occur in the last stable version 6.8.3 or earlier. Workaround is to edit the /etc/profile to remove the offending lines. I don't understand the rationale behind this.
- Minor
- 1257 views
-
I have an array of 5 data disks, 1 parity disk, 1 cache and the flash. I have 1 of the data discs encrypted (2TB disk) in my array and 1 of my shares is set to include only that disk and doesn't use the cache. That all works fine and I have all the other shares not using the encrypted disk. When I look at the shares tab, the share using the encrypted disk reports its free space as just over 5TB. It should only be just under 2TB I would have thought. All the other sha
- Solved
- Annoyance
- 1318 views
-
Title says it all. Upgraded to 6.9.1 ok, tried to reboot and it just hangs, power off and clean start and it boots, complete with parity check,what's up? I've regressed to 6.8.3, everything works! Any ideas guys?
- Minor
- 1061 views
-
Using the command watch -n 1 grep MHz /proc/cpuinfo gives no output anymore (empty window)
- Solved
- Minor
- 680 views
-
Hello, This is the first time installing UNRAID. I am attempting to get the UEFI mode only to work. The local GUI does not show up it shows a blinking cursor. This is applicable to both 6.9 & 6.9.1, I have tried with both and it does the same. I have tried Safe mode GUI no plugins and still doesn't work. I have not installed any plugins as I just installed it on to a Flash Drive. My BIOS is Asus version 3405 and American MegaTrends. I only have AMD Graphic
- Solved
- Minor
- 2670 views
-
When trying to change an option in Settings/Management Access and then clicking Apply, nothing happens and the option is reset after reloading the page. This error does not occur on other settings pages. I could reproduce the error with 6.9.0 and 6.9.1 in Safari and Chrome. Edit: Just changed the language to English and now it works. Seems to be a problem with the translation. Edit2: Have tried it with a few different language packs (Dutch and French) and only the Germa
- Solved
- Minor
- 639 views
(Small).thumb.jpg.fe8c903f823244f649b99f639a4ada85.jpg)
(Small).thumb.png.b884b0484e848c502a315fc27b995f59.png)
