Stable Releases

My server using an Intel dual-port 10Gb XFP NIC is routinely removing the driver with the following syslog message which removes all network connectivity.    Mar 17 08:18:19 MU-TH-UR kernel: ixgbe 0000:03:00.0: Adapter removed Mar 17 08:18:19 MU-TH-UR kernel: ixgbe 0000:03:00.0: Warning firmware error detected FWSM: 0xFFFFFFFF I have serial console and local access so I am at least able to bounce the server to bring it back. Diagnostics file attached.  Not sure what to do here a

If I enable IOMMU in my BIOS, unraid cannot read my harddrives. One of my primary purposes was to passthrough my gpu a VM, so I'm pretty dissapointed. I've added amd_iommu=pt to my syslinux.cfg file and that didn't resolve it, unfortunately. Another user with the same hardware was unable to resolve this in the following thread: https://forums.unraid.net/bug-reports/stable-releases/disks-missing-after-upgrading-to-670-r536/page/2/ Is there another solution or boot configuration I can tr

Hello, The problem happened twice when I was using loading 100% the CPU. I was setting up a new Photoprism docker, after that was done, I went to the WebGUI to start the "index", their index started using all my cpu threads ( it is fine, I'm not using CPU pinning ) and after about 10 seconds I lost all connectivity with the server. I connected a monitor and keyboard directly to the server to see what was going on, and no video or anything, only a restart fixed it.   Atta

Hey Team,   Recently had to go through an exercise of downsizing the cache array on an encrypted array (and encrypted cache array).   Only way to do so was via:   1. Tools -> New Config -> Preserve current assignments [Array slots]. 2. wipefs -a /dev/sd[y-z] # (clear filesystem from cache drives) 3. assign cache drives 4. Mark 'parity is already valid' 5. Start array 6. encounter unmountable drives  -- The array was hosed at

Hello,   When I upgraded from 6.8.3 to 6.9.2, I noticed my browser is unable to load the webpage when trying to log into my server and also trying to open any of my dockers web ui.   When my browser stops trying to resolve the webpage, if I hit refresh a few times the docker/server will load the page and will be accessible again. Once I close the window, the issue will return. I originally thought it was my router or a cookies/cache but I have rebooted the router, uninstalled chro

There seems to be a really odd performance issue with LSI-2308 based controllers When all the drives on the controller are spun down (I only have eight) and you attempt to access them for parity checking, benchmarking a single drive We get the following speed results from Parity tests: 2021-04-27, 03:06:09 1 day, 4 hr, 36 min, 29 sec 77.7 MB/s OK 0 2021-03-15, 14:44:59 15 hr, 14 min, 58 sec 145.8 MB/s OK 0 2021-02-15, 15:16:28 15 hr, 46 min, 27 sec 140.9 MB/s OK 0 2021-01-11,

I don't know what is going on. All of the sudden my server is rebooting what seems like every few minutes. I have been running 6.9.2 since it first came out, so it isn't like I am running a beta release. And I haven't made any configuration changes to the server. In fact, I was simply using the Windows 10 VM when it started this behavior.  I am attaching the diagnostic data from Safe Mode with the array started.  Yes, it seems to work in safe mode. I know that some plugins got updated today

YOU BROKE MY VM with GPU passthrough. Impacted when driver is attached. Does not boot, black screen, cpu pegged at 100% on the first thead. Many others having this issue apparently too.

problem is after i added nvme with 10g nic server experiances random hard crashes. system locks up so hard i dont have display and cant use keyboard i need to power down server via button. once i did saw kernel panic messege what i managed to capture. before that my server was stable almost a year of uptime. i need help to solve this problem i dont rly know nothing about linux thats why i did choose unraid so yea how do i capture log when things will go bad ?    also there is log that

Hello. I have 2 Unraid servers with 6.9.2. When I mount SMB share from one server to another I have that really annoying error "Stale file handle". So I simply can't mount my shares. Need support for this or fix.

Hi there. Happy user of unRAID for an eternity. Well, ish, but it's usually hardware's fault, not unRAID's fault.   Usually.   I recently had to upgrade my motherboard, and in the process, the ordering of my disk controllers got shuffled. No big deal, I had to change the SMART Settings, 3ware-related values per-disk. I wrote a handy script to identify disks for me under the terminal, just have to retype each one...   I entered each value, clicked Done, moved to the

unraid 6.9.2.   Creator on Windows notebook. Intel C216 mobile chipset, core 3xxx generation. Tried several Sandisk 32gb usb flash drives - none of them showed up in the creator. Cheap old 16gb intenso usb stick worked fine. But this is not a quality device. Bought 2 different sandisk 16gb drives today.    Ultra Usb 3.0 (black, plastic)  Does not show up in creator.    Ultra Flair Usb 3.0 (small, black silver aluminium) Does show up. Tried several times: 1. the

I don't know if the VPN dashboard is part of Unraid or the Wirecard plugin, so excuse me if I'm posting in the wrong board.   VPN shows 1 active tunnel - always. If there's no active tunnel - one is shown. If there are two active tunnels - one is shown. Even with 1 active tunnel - one is shown   In fact I never saw something different than "1".   Thanks.  

I just updated to 6.9.2 and I am unable to spin down my SAS drives. They do not spin down by schedule and if I manually spin them down, the icon changes to the spinning one and then goes back to being green. I have a combination of HUS724030ALS640 and HUS723030ALS640.   Before the update (on 6.8.3 I think) I could spin down the HUS723030ALS640 but was unable to for HUS724030ALS640  tower-diagnostics-20210415-2155.zip

Sometimes when a docker container is updated any previously removed port mappings that where on there by default are re-added by unraid. For example if you run a container behind an nginx reverse proxy and dont want it to get a port mapped you remove it when installing. Later on when there is an update the port sometimes is re-added when you trigger the update.   Reproduction: 1. Install a container/app from community apps 2. Remove the port mapping before starting 3.

Hi,   After upgrading from 6.9.1, I get read errors on my array. I've upgraded the first day the new version was released, and had the same issue, I performed a fallback, and it solved the problem, array went back to normal. ragnarok-diagnostics-20210427-1001.zip

[VMS] -> [ADD  VM]  chick VM, [EDIT] [Unraid Share] set first,all ok [Unraid Share] add new ,set it [UPDATE] -> ........ can't update. why ？ the bug too long...... no fix it ?

Reverted back to 6.9.1 and effect stops.   Is this related to emhttpd: detect out-of-band device spin-up?   This only is visible when all devices are spun down.

I am running Unraid 6.9.2. When I use Safari browser, and the color theme has been changed to black, the console launches another login window.    To repeat bug: use Safari browser. Change Settings --> Display Settings --> Dynamix color theme to Black. Launch "console" from DOCKER tab on top. Even after restoring to the default White theme, the error persists. Clearing cookies, launching private tabs, etc.. does not work. Google Chrome and Firefox operate as expected.

Hello,   my server setup contains 2 unraid server:   IOT/Downloads (6.9.1, 1 disk) Plex/Media Hosting (6.8.3, online since 147 days, trial version, 7 disks, sorry for still using the trial )   The media folder of the Plex-Server is mounted as a remote share (nfs) via web gui on the iot-server.   As you see, I upgraded the IOT Server to 6.9.1 (from 6.8.3) and since then I got problems with remote shares. It becomes stale after a random time. With 6.8.3

Sorry if this isn't the right place for this but it seemed like the best option.    Issue The descriptions of Share access controls differs between different parts of the official documentation.  The descriptions of Private and Secure controls appear to be swapped between the Storage Management docs and the Security Best Practices guide.    Given the desire to make security best practices clear and easy to follow, this discrepancy could make it hard for new users to unde

Hi, Went to turn on the TV for my kid this morning and no plex, go check my shares and they aren't there. Pulled Diagnositics and did a reboot through the button in the upper right hand corner (Dark Theme) and when the system came back up it whined about an unclean shutdown. Pulled a second set up diags.    I had not touched the array since yesterday morning.   This is not the first time share dropped out from under me on a version of 6.9, but other people had reported it, so

Since I have upgraded from 6.8.3 there is weird bug. After some time disks are shown to be in stand by (gray status). But problem is that I can clearly hear that some disks are still spinning. I haven't had this issue with previous version of Unraid.   When this happens, I have found workaround to spin them down manually: first I need to spin them up (I guess to GUI gets update that they are actually spining) then I can click on spin down and all of them w

ver 6.9.2   I had to replace my failed UNRAID USB 2 months ago, and I installed UNRAID on a new USB and received the new key (see below).   Today, my UNRAID was running fine. While attempting to take out a data USB drive, I accidentally pulled out UNRAID USB drive. After about an hour, I logged into my UNRAID and saw a white background GUI (I always run dark mode). This was odd, so I rebooted UNRAID only to arrive at the same screen. I then saw several issues.   (Se

If there are notifications queued up in the UI, but by the time you click x or clear all the log in session has expired, they look like they are clearing by disappearing, but then they all come back again.   A page refresh (and subsequent re-log in/confirm the 'insecure' cert to continue) then they can be cleared.   The expected behavior would be for the client side browser logic to detect it couldn't post the clear request to the server, and force a refresh/relogin or the li