theone Posted January 28, 2015 Author Share Posted January 28, 2015 I will probably not compile any newer versions for the 32bit unRAID and will only continue to support 64bit version although I am still on 5.0.6 until 6 is released. Quote Link to comment
scumball Posted January 30, 2015 Share Posted January 30, 2015 I followed this post, and compiled it myself http://lime-technology.com/forum/index.php?topic=25099.msg274366#msg274366 If anyone wants to try it then here you go - I bear no responsibility for any damage this could cause - it worked for me that's all I'm saying - no support or anything offered... https://www.dropbox.com/sh/qoh31loweayhrzf/AAAyMGRvtr_yRjfbXxS3Jk4Ba?dl=0 Quote Link to comment
ijuarez Posted January 30, 2015 Share Posted January 30, 2015 I followed this post, and compiled it myself http://lime-technology.com/forum/index.php?topic=25099.msg274366#msg274366 If anyone wants to try it then here you go - I bear no responsibility for any damage this could cause - it worked for me that's all I'm saying - no support or anything offered... https://www.dropbox.com/sh/qoh31loweayhrzf/AAAyMGRvtr_yRjfbXxS3Jk4Ba?dl=0 Is this running on v6b12? and if so how are you running a webserver? Quote Link to comment
scumball Posted January 30, 2015 Share Posted January 30, 2015 No on 32bit...where 4.3.20 hadn't been updated previously... Quote Link to comment
JonathanM Posted January 30, 2015 Share Posted January 30, 2015 how are you running a webserver? This works on v6 quite nicely. http://lime-technology.com/forum/index.php?topic=33692.0 Quote Link to comment
HarryRosen Posted February 21, 2015 Share Posted February 21, 2015 will this plugin work on v6b12+ Quote Link to comment
Capt.Insano Posted March 3, 2015 Share Posted March 3, 2015 will this plugin work on v6b12+ I have been unable to get this plugin working on 6b12+. I just attempted with 6b14b, I was going to compile VirtualBox for my kernel myself. I installed the plg using the webui but I could not access the plugin settings page, it was just blank even after a restart. Hopefully it will be updated at some stage! Quote Link to comment
RivaSABB Posted March 3, 2015 Share Posted March 3, 2015 will this plugin work on v6b12+ I have been unable to get this plugin working on 6b12+. I just attempted with 6b14b, I was going to compile VirtualBox for my kernel myself. I installed the plg using the webui but I could not access the plugin settings page, it was just blank even after a restart. Hopefully it will be updated at some stage! Hi, I can help with that. PhAzE had a very helpful few lines which you can add to your "GO" file. #PhAzE v12 Updates - virtualbox cp -r /usr/local/emhttp/plugins/webGui/phaze.page /usr/local/emhttp/plugins/dynamix echo "" >> /usr/local/emhttp/plugins/virtualbox/virtualbox.page echo "---" >> /usr/local/emhttp/plugins/virtualbox/virtualbox.page echo "" >> /usr/local/emhttp/plugins/virtualbox/virtualbox.page cat /usr/local/emhttp/plugins/virtualbox/virtualbox.php >> /usr/local/emhttp/plugins/virtualbox/virtualbox.page rm -f /usr/local/emhttp/plugins/virtualbox/virtualbox.php sed -i 's!\r!!g' /usr/local/emhttp/plugins/virtualbox/virtualbox.page Instead of restarting, after you add this to the GO file open a Telnet session and past the script in there and press enter. Refresh the VirtualBox settings page and it should now appear. Cheers Quote Link to comment
Capt.Insano Posted March 5, 2015 Share Posted March 5, 2015 Hi, I can help with that. PhAzE had a very helpful few lines which you can add to your "GO" file. #PhAzE v12 Updates - virtualbox cp -r /usr/local/emhttp/plugins/webGui/phaze.page /usr/local/emhttp/plugins/dynamix echo "" >> /usr/local/emhttp/plugins/virtualbox/virtualbox.page echo "---" >> /usr/local/emhttp/plugins/virtualbox/virtualbox.page echo "" >> /usr/local/emhttp/plugins/virtualbox/virtualbox.page cat /usr/local/emhttp/plugins/virtualbox/virtualbox.php >> /usr/local/emhttp/plugins/virtualbox/virtualbox.page rm -f /usr/local/emhttp/plugins/virtualbox/virtualbox.php sed -i 's!\r!!g' /usr/local/emhttp/plugins/virtualbox/virtualbox.page Instead of restarting, after you add this to the GO file open a Telnet session and past the script in there and press enter. Refresh the VirtualBox settings page and it should now appear. Cheers Thanks for suggestion, but I'm afraid this will not work, looking at the addition suggested to the GO file I checked around my file system and "/usr/local/emhttp/plugins/webGui/phaze.page" does not even exist on my system. Hopefully we will see native support of b12+ within this plugin soon, until then I'll wait! Quote Link to comment
spotopolis Posted March 5, 2015 Share Posted March 5, 2015 Hi, I can help with that. PhAzE had a very helpful few lines which you can add to your "GO" file. #PhAzE v12 Updates - virtualbox cp -r /usr/local/emhttp/plugins/webGui/phaze.page /usr/local/emhttp/plugins/dynamix echo "" >> /usr/local/emhttp/plugins/virtualbox/virtualbox.page echo "---" >> /usr/local/emhttp/plugins/virtualbox/virtualbox.page echo "" >> /usr/local/emhttp/plugins/virtualbox/virtualbox.page cat /usr/local/emhttp/plugins/virtualbox/virtualbox.php >> /usr/local/emhttp/plugins/virtualbox/virtualbox.page rm -f /usr/local/emhttp/plugins/virtualbox/virtualbox.php sed -i 's!\r!!g' /usr/local/emhttp/plugins/virtualbox/virtualbox.page Instead of restarting, after you add this to the GO file open a Telnet session and past the script in there and press enter. Refresh the VirtualBox settings page and it should now appear. Cheers Thanks for suggestion, but I'm afraid this will not work, looking at the addition suggested to the GO file I checked around my file system and "/usr/local/emhttp/plugins/webGui/phaze.page" does not even exist on my system. Hopefully we will see native support of b12+ within this plugin soon, until then I'll wait! I just tried it on v6b14b and it worked for me! Thank you! Down side is even though the page is showing up, there hasn't been any compatible Virtualbox releases for it, so it still will not run. At least the page is showing up now. Quote Link to comment
theone Posted March 5, 2015 Author Share Posted March 5, 2015 I haven't compiled the latest virtualbox for unraid 6b14 because my test server is down. The test server is an UNRAID (FREE license) virtual machine running on Windows VirtualBox that uses an IDE drive as the USB drive. The latest beta (14) for some reason doesn't let me run it as such - doesn't seem to allow the server to start running the array without recognizing the USB drive which does not exist. in previous beta versions and also on unraid 5 there wasn't such a problem. It boots fine and reaches the WEBUI stage but the array stays offline (STOP mode). Can anyone help finding a solution? Quote Link to comment
RivaSABB Posted March 12, 2015 Share Posted March 12, 2015 Hi, I can help with that. PhAzE had a very helpful few lines which you can add to your "GO" file. #PhAzE v12 Updates - virtualbox cp -r /usr/local/emhttp/plugins/webGui/phaze.page /usr/local/emhttp/plugins/dynamix echo "" >> /usr/local/emhttp/plugins/virtualbox/virtualbox.page echo "---" >> /usr/local/emhttp/plugins/virtualbox/virtualbox.page echo "" >> /usr/local/emhttp/plugins/virtualbox/virtualbox.page cat /usr/local/emhttp/plugins/virtualbox/virtualbox.php >> /usr/local/emhttp/plugins/virtualbox/virtualbox.page rm -f /usr/local/emhttp/plugins/virtualbox/virtualbox.php sed -i 's!\r!!g' /usr/local/emhttp/plugins/virtualbox/virtualbox.page Instead of restarting, after you add this to the GO file open a Telnet session and past the script in there and press enter. Refresh the VirtualBox settings page and it should now appear. Cheers Thanks for suggestion, but I'm afraid this will not work, looking at the addition suggested to the GO file I checked around my file system and "/usr/local/emhttp/plugins/webGui/phaze.page" does not even exist on my system. Hopefully we will see native support of b12+ within this plugin soon, until then I'll wait! If you pop this in it will work. I am fairly confident because I am using it now. Give it a whirl, nothing to loose and would greatly appreciate a v6b14a update. Thanks Quote Link to comment
Timbiotic Posted March 15, 2015 Share Posted March 15, 2015 great info for the webgui to work but i am in same boat now. No compatible virtualbox. Might be time to learn docker Quote Link to comment
RivaSABB Posted March 15, 2015 Share Posted March 15, 2015 great info for the webgui to work but i am in same boat now. No compatible virtualbox. Might be time to learn docker I hear you! I am running v6b12 and cant upgrade until its compiled for the new kernel. Only reason I cant leave is because of a WinVM that I am running. .... O well.... Quote Link to comment
Timbiotic Posted March 15, 2015 Share Posted March 15, 2015 can i download beta 12 anywhere i went from 10 nevermind just changed the 14b to a 12 from download site and it worked Quote Link to comment
spotopolis Posted March 18, 2015 Share Posted March 18, 2015 I haven't compiled the latest virtualbox for unraid 6b14 because my test server is down. The test server is an UNRAID (FREE license) virtual machine running on Windows VirtualBox that uses an IDE drive as the USB drive. The latest beta (14) for some reason doesn't let me run it as such - doesn't seem to allow the server to start running the array without recognizing the USB drive which does not exist. in previous beta versions and also on unraid 5 there wasn't such a problem. It boots fine and reaches the WEBUI stage but the array stays offline (STOP mode). Can anyone help finding a solution? You might be able to come up with something using a boot cd ISO. I built one using http://www.plop.at/en/bootmanagers.html and use it on my server. It doesn't want to boot to the flash drive, so I have it boot to CD, it then runs a boot menu that allows me to boot to USB. Maybe you can make it work for you in someway that works for you? Quote Link to comment
Capt.Insano Posted March 27, 2015 Share Posted March 27, 2015 I also use plop bootmanager, my server does actually support USB booting but only at USB 1.1 speeds for some weird reason so boot took FOREVER!! Now I have my server to autoboot to CD with plop on it, plop then loads proper USB drivers and boots off my unRAID USB stick WAY faster than without plop. Hopefully you can get this to work and get your test server up and running again, I find Docker great but I really want to try and run Vortexbox on my server and it need proper virtualisation. Anyway, best of luck! Quote Link to comment
HarryRosen Posted March 29, 2015 Share Posted March 29, 2015 any progress on this for 6b14b?? Quote Link to comment
Timbiotic Posted April 7, 2015 Share Posted April 7, 2015 /bump. Love this plugin but would love it to work with latest. Quote Link to comment
theone Posted April 9, 2015 Author Share Posted April 9, 2015 At last got my unRAID VM running again and am currently compiling Virtualbox for kernel version 3.18.5 (unRAID 14b). After that I will try to modify my plugin for the new plugin system... Edit: Compile completed... Waiting for a1aina to post on his site: http://vbox.a1aina.com/ Please post any issues with this version. Quote Link to comment
JonathanM Posted April 9, 2015 Share Posted April 9, 2015 Compile completed... Waiting for a1aina to post on his site: http://vbox.a1aina.com/ Her site. Female computer geek. I know, it's not expected. Quote Link to comment
Timbiotic Posted April 9, 2015 Share Posted April 9, 2015 YEA!!! CANT WAIT! At last got my unRAID VM running again and am currently compiling Virtualbox for kernel version 3.18.5 (unRAID 14b). After that I will try to modify my plugin for the new plugin system... Edit: Compile completed... Waiting for a1aina to post on his site: http://vbox.a1aina.com/ Please post any issues with this version. Quote Link to comment
lainie Posted April 9, 2015 Share Posted April 9, 2015 It is up now. Let me know if there are download issues or md5 is off, but should be good. And yes, She/Her Quote Link to comment
Capt.Insano Posted April 9, 2015 Share Posted April 9, 2015 Does the plugin also now work on beta14b? Thanks for the work! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.