bonienl Posted January 19, 2014 Author Share Posted January 19, 2014 Is it possible look for NFS too? I haven't found a way (=command) to make NFS streams visible, unless somebody can point me in the right direction, it is limited to SMB and AFP. Link to comment
Zonediver Posted January 19, 2014 Share Posted January 19, 2014 Here is the Output-File with two streams running Interesting: I see nowhere the IPs of the two Devices in this file (iPhone and iPad). More study and back to the basics ... Please uninstall/install once again the Active Streams plugin, really hope this is it Thanks for your help in this case IP and Streams are now displayed again but we have the same problem as before. If more then one stream is running, The plugin shows one of these two twice. i think we should leafe as it is. The only important thing for me is to see which streams are running. If one is shown twice, it dosnt matter Thanks for your great work and a good night to you Link to comment
bonienl Posted January 20, 2014 Author Share Posted January 20, 2014 Yeah, I leave it as is now. For those who installed version 2.0.5 before, do a uninstall + install using Plugin Control, to get the updated version. Link to comment
ijuarez Posted January 20, 2014 Share Posted January 20, 2014 i need to do some maint on one of pluggins and just noticed that all of my influencer plugins are not there? how can i get them back? thanks No one, well shoot Link to comment
trurl Posted January 20, 2014 Share Posted January 20, 2014 i need to do some maint on one of pluggins and just noticed that all of my influencer plugins are not there? how can i get them back? thanks No one, well shoot In Dynamix, the unplugged (influencer) plugins are in a separate tab (Unpluggged PLG) under Settings Link to comment
ijuarez Posted January 20, 2014 Share Posted January 20, 2014 i need to do some maint on one of pluggins and just noticed that all of my influencer plugins are not there? how can i get them back? thanks No one, well shoot Yes that is what i assumed when i installed Dynamix but its not there. I have an issues with CP and needs to be rebooted from the WebGui rebooting from within the app causes to just crash. see picture In Dynamix, the unplugged (influencer) plugins are in a separate tab (Unpluggged PLG) under Settings Link to comment
trurl Posted January 20, 2014 Share Posted January 20, 2014 If you haven't rebooted since upgrading unRAID you might try that. I think there is something about those plugins being in a separate section that makes them not show up until a reboot. Several people have reported that and I had that problem too but after one reboot they showed up and have stayed. Link to comment
ijuarez Posted January 20, 2014 Share Posted January 20, 2014 If you haven't rebooted since upgrading unRAID you might try that. I think there is something about those plugins being in a separate section that makes them not show up until a reboot. Several people have reported that and I had that problem too but after one reboot they showed up and have stayed. Me: I Can FAILZ You: thanks Link to comment
gapinl Posted January 20, 2014 Share Posted January 20, 2014 I need some help Please. I successfully installed Dynamix Web GUI and I can get access through it with my browser However I don't get plug ins controls in the GUI and therefore I can't install system infos, system stats etc... What am I doing wrong? Thanks for the help Link to comment
nacat78 Posted January 20, 2014 Share Posted January 20, 2014 Posted by: gapinl « on: Today at 09:09:52 AM » I need some help Please. I successfully installed Dynamix Web GUI and I can get access through it with my browser However I don't get plug ins controls in the GUI and therefore I can't install system infos, system stats etc... What am I doing wrong? Thanks for the help make sure that the control plugin "dynamix.plugin.control-2.0.3-noarch-bergware.plg" is in the "boot\config\plugins\" folder install by doing a reboot or command-line/telnet cd /boot/config/plugins/intallplg dynamix.plugin.control-2.0.3-noarch-bergware.plg Link to comment
ijuarez Posted January 20, 2014 Share Posted January 20, 2014 Posted by: gapinl « on: Today at 09:09:52 AM » I need some help Please. I successfully installed Dynamix Web GUI and I can get access through it with my browser However I don't get plug ins controls in the GUI and therefore I can't install system infos, system stats etc... What am I doing wrong? Thanks for the help yes run the installplg its much faster. make sure that the control plugin "dynamix.plugin.control-2.0.3-noarch-bergware.plg" is in the "boot\config\plugins\" folder install by doing a reboot or command-line/telnet cd /boot/config/plugins/intallplg dynamix.plugin.control-2.0.3-noarch-bergware.plg Link to comment
jbartlett Posted January 20, 2014 Share Posted January 20, 2014 I don't have a parity drive configured on my backup Unraid server, however, it's reporting 11 drives in the totals when I have drives 1-10 assigned. Link to comment
nacat78 Posted January 20, 2014 Share Posted January 20, 2014 Posted by: jbartlett « on: Today at 11:03:53 AM » I don't have a parity drive configured on my backup Unraid server, however, it's reporting 11 drives in the totals when I have drives 1-10 assigned. Don't forget about your thumb drive Link to comment
jbartlett Posted January 20, 2014 Share Posted January 20, 2014 Posted by: jbartlett « on: Today at 11:03:53 AM » I don't have a parity drive configured on my backup Unraid server, however, it's reporting 11 drives in the totals when I have drives 1-10 assigned. Don't forget about your thumb drive Or my cache drive - but those are all displayed on different tabs. The totals reads "Array of eleven disks" Link to comment
bonienl Posted January 21, 2014 Author Share Posted January 21, 2014 I don't have a parity drive configured on my backup Unraid server, however, it's reporting 11 drives in the totals when I have drives 1-10 assigned. I think you uncovered a bug in unRAID itself. The GUI reads and displays the variable "mdNumProtected" which is supposed to reflect the number of protected drives in the array. Apparently this number always includes parity, in other words it expects the parity drive to be present. Link to comment
hallifallen Posted January 21, 2014 Share Posted January 21, 2014 Hi, again. I seem to have a problem with the network graph under Stats->System stats. I remember that it worked fine when I first installed, but I haven't visited the stats page in a while so I don't know when it broke. Link to comment
bonienl Posted January 21, 2014 Author Share Posted January 21, 2014 Hi, again. I seem to have a problem with the network graph under Stats->System stats. I remember that it worked fine when I first installed, but I haven't visited the stats page in a while so I don't know when it broke. See http://lime-technology.com/forum/index.php?topic=31218.msg284182#msg284182 System Stats related questions, better keep them in the dedicated topic for easy consolidation. Link to comment
phenomeus Posted January 21, 2014 Share Posted January 21, 2014 hi bonienl, i tried dynamix today and i like it very much. but i have some problems. i installed also plugin control and some plugins from there, but none of them can survive a reboot?! only the dynamix webgui and some other plgs like btsync or plexupdater are getting installed. but none of the dynamix plgs. any idea? manually installation after the boot via ssh and installplg works without any problems. Link to comment
nacat78 Posted January 21, 2014 Share Posted January 21, 2014 @phenomeus dynamix.webgui is installed in the /boot/plugins folder rest of plugins installed need to be installed in /boot/config/plugins folder to survive http://bergware.github.io/dynamix/ or https://github.com/bergware/dynamix for install of optional dynamix plugins - really just need control panel one then use that to install the rest from the gui Link to comment
ijuarez Posted January 22, 2014 Share Posted January 22, 2014 Has anyone using Email Notifications had luck setting it up with Google Apps (basically gmail) 2 Step verification. I had SF working just fine using an application specific password but now Dynamix doesn't work and gives this error. Jan 10 20:17:39 Tower sSMTP[14330]: Creating SSL connection to host Jan 10 20:17:39 Tower sSMTP[14330]: SSL connection using RC4-SHA Jan 10 20:17:40 Tower sSMTP[14330]: Authorization failed (535 5.7.8 http://support.google.com/mail/bin/answer.py?answer=14257 gv10sm21179820pbd.0 - gsmtp) The link talks about word verification being the issue but I already tried clearing that and the title to the page says "client" isn't accepting so I'm inclined to guess its something with sSMTP on my machine and not Google. I am using a gmail account and have it working. Posted a screenshot of the settings below, you need to fill in your own gmail address of course ! It might be an SSL issue, are you using any other plugin with openSSL ? +1 Link to comment
rbronco21 Posted January 22, 2014 Share Posted January 22, 2014 I copied and pasted the password from the google page and email didn't work for me. Then I checked the email config file and saw that it had spaces before and after the password. Once I removed these from the text file, it worked great. May not be your issue, but maybe it will help someone. Link to comment
phenomeus Posted January 22, 2014 Share Posted January 22, 2014 @nacat78 thanks that helped! Link to comment
aitkinst Posted January 23, 2014 Share Posted January 23, 2014 Is the mail ssmtp still available if the settings page has it disabled? I don't want it to send me status updates but I do want error messages and I would also like the preclear script to be able to send me emails. Right now I will get test emails and if I enable it I will get the status reports but I won't get emails from my apc ups when I pull the cord out of the wall and now I've also noticed preclear can't use the -m or -M options. Are these things supposed to work or is this plugin different than the way the SF worked? Link to comment
jbartlett Posted January 23, 2014 Share Posted January 23, 2014 The Dynamic plugins do not seem to be compatible with Unraid 6.0 64bit - unraid doesn't start up at all, unmenu isn't started, only share available was a "root" share I had configured in the smb-extra.conf file. Link to comment
Recommended Posts