TODDLT Posted June 19, 2019 Share Posted June 19, 2019 Separate question to the above. I have now realized there are 5 different docker containers for Plex and I don't see much explanation of why one would be different over the others, except for who maintains the docker. Very simply, is there any real difference between them? If I was going to migrate (to Binhex) Can I install the new docker and will it point to the same Plex database? IE can I keep both set up and just change which one "auto-starts" with unRAID until I confirm it's all up and running correctly? If not what would the process be? I have a rather large media collection with quite a bit of custom tweaking of the database, IE how movies are organized. Starting over would be extraordinarily painful. Thanks again. 1 Quote Link to comment
Marimuria Posted June 20, 2019 Share Posted June 20, 2019 On 6/19/2019 at 8:53 AM, ProZac said: Nothing silly at all what you did, the database bug is new to most people in this latest Unraid update, just be aware, some people have had their database wiped by changing the mapping, but as it's just to rebuild and wait (and ur's don't work anyway), I would still try to change it I am not running the appdata in /cache, I'm still using /user on all with no issues. From the looks of all the other posts around the forum there is some incompatibility either with specific hardware or some weird sw bug nobody have been able to find so far that creates the issue. Circling back on this thread: Changing the path for plex to /mnt/cache/appdata/binhex-plexpass helped me not have the errors from Plex that I was encountering. The issue now is that if the server is restarted, or the cache is cleared for whatever reason, then there will be a fresh setup of plex every time. Is there a way to get around this? Maybe changing it back to /mnt/user/appdata/Plex but have it set to a specific disk (Ex: /mnt/disk1/appdata/binhex-plexpass/)? I am not sure if this will result me in having the same issue or if this will fix it Thank you in advance! Quote Link to comment
Rick Gillyon Posted June 20, 2019 Share Posted June 20, 2019 Just set your appdata share to use cache, then mover will move it. Quote Link to comment
JonathanM Posted June 20, 2019 Share Posted June 20, 2019 30 minutes ago, Marimuria said: Changing the path for plex to /mnt/cache/appdata/binhex-plexpass helped me not have the errors from Plex that I was encountering. The issue now is that if the server is restarted, or the cache is cleared for whatever reason /mnt/cache is your cache drive or pool. If you don't have one assigned, then that location is in RAM. You must actually HAVE a cache drive assigned for that to work properly. Quote Link to comment
Marimuria Posted June 20, 2019 Share Posted June 20, 2019 36 minutes ago, jonathanm said: You must actually HAVE a cache drive assigned for that to work properly. 43 minutes ago, Rick Gillyon said: Just set your appdata share to use cache, then mover will move it. It looks like the only option that I have to use the binhex plex docker is to have it in the cache. I do not currently have a cache drive (I am currently trying to free one up to use to get plex running as its primarily what I use the server for). But, is having a dedicated cache drive going to present me with the same issues as using ram? Do I need to use some mover function shenanigans to have the Plex server not be re-created each time I cycle the server or if the server decides to randomly clear the cache or is this something that does not happen with a dedicated drive? Quote Link to comment
Rick Gillyon Posted June 20, 2019 Share Posted June 20, 2019 It does not happen with a cache drive, mover will just do the initial move then it's there for good. Quote Link to comment
trurl Posted June 21, 2019 Share Posted June 21, 2019 14 hours ago, Rick Gillyon said: Just set your appdata share to use cache, then mover will move it. There are 4 different possible settings for use cache, only 2 of those settings will invoke mover, and only one of them will result in moving files TO cache. Also, mover can't move open files so just setting something to cache-prefer (the one that will move TO cache) may not be enough to get it done. Disable docker service, or at least stop the particular container, then run mover after setting it to cache-prefer. 13 hours ago, Rick Gillyon said: It does not happen with a cache drive, mover will just do the initial move then it's there for good. And only 2 of the 4 settings for use cache will result in files staying on cache. See this FAQ for more details about the use cache settings: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/page/2/#comment-537383 Quote Link to comment
Rick Gillyon Posted June 21, 2019 Share Posted June 21, 2019 Thanks for that. I always assumed Prefer and Only would move. Quote Link to comment
djgizmo Posted June 21, 2019 Share Posted June 21, 2019 I'm having an odd issue wi th this specific docker where the WebUI menu option doesn't show un Unraid. All the other BinHex dockers show it just fine. Any suggestions? Quote Link to comment
Marimuria Posted June 21, 2019 Share Posted June 21, 2019 2 hours ago, djgizmo said: I'm having an odd issue wi th this specific docker where the WebUI menu option doesn't show un Unraid. All the other BinHex dockers show it just fine. Any suggestions? Some log files would be needed to investigate this. Fresh supervisor log file as minimum, maybe run command? Where to find the supervisor log file is located on the first post of the thread, and the run command can be described in the first link https://forums.unraid.net/topic/57181-real-docker-faq/ Quote Link to comment
Marimuria Posted June 21, 2019 Share Posted June 21, 2019 8 hours ago, trurl said: And only 2 of the 4 settings for use cache will result in files staying on cache. If I am reading the forum correctly. Cache only and Cache prefer are the cache options to keep the data on the cache drive. I think having the added ability to 'overflow' cached data on a drive with Cache prefer, I think this would be a better option for my use case. Thank you for the help Quote Link to comment
djgizmo Posted June 22, 2019 Share Posted June 22, 2019 (edited) 18 hours ago, Marimuria said: Some log files would be needed to investigate this. Fresh supervisor log file as minimum, maybe run command? Where to find the supervisor log file is located on the first post of the thread, and the run command can be described in the first link https://forums.unraid.net/topic/57181-real-docker-faq/ I'm unsure if I'm being clear.... attached is a screen shot what I mean. Plex works just fine and I can login to it just fine with the IP address... however the menu for this is missing in Unraid. Edited June 22, 2019 by djgizmo Quote Link to comment
trurl Posted June 22, 2019 Share Posted June 22, 2019 2 minutes ago, djgizmo said: I'm unsure if I'm being clear.... attached is a screen shot what I mean. Plex works just fine and I can login to it just fine with the IP address... however the menu for this is missing in Unraid. That comes from the template too. Click Edit then post a screenshot of the Update Container page on Advanced View. Quote Link to comment
djgizmo Posted June 22, 2019 Share Posted June 22, 2019 1 minute ago, trurl said: That comes from the template too. Click Edit then post a screenshot of the Update Container page on Advanced View. here you go... Quote Link to comment
trurl Posted June 22, 2019 Share Posted June 22, 2019 That looks OK. Don't know. Is it having that problem on both the Docker page and the Dashboard? Quote Link to comment
djgizmo Posted June 22, 2019 Share Posted June 22, 2019 (edited) 2 hours ago, trurl said: That looks OK. Don't know. Is it having that problem on both the Docker page and the Dashboard? yep. It's odd. I have 3 dockers that do this. out of 25. No error in logs. Feels like a configuration issue... but no clue what. Edited June 22, 2019 by djgizmo spelling Quote Link to comment
LumberJackGeek Posted June 22, 2019 Share Posted June 22, 2019 Hey my Plex was running just fine for a few days, I was watching a TV show, then when it went to the next TV show it wouldn't connect. I restarted and I haven't been able to get it since. Here's the log: Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2019-06-22 14:09:36.317454 [info] System information Linux Dataserver2 4.19.41-Unraid #1 SMP Wed May 8 14:23:25 PDT 2019 x86_64 GNU/Linux 2019-06-22 14:09:36.352690 [info] PUID defined as '99' 2019-06-22 14:09:36.391451 [info] PGID defined as '100' 2019-06-22 14:09:37.293855 [info] UMASK defined as '000' 2019-06-22 14:09:37.330049 [info] Permissions already set for volume mappings 2019-06-22 14:09:37.365713 [info] TRANS_DIR defined as '/config/transcode' 2019-06-22 14:09:37.402208 [info] Starting Supervisor... 2019-06-22 14:09:37,650 INFO Included extra file "/etc/supervisor/conf.d/plexmediaserver.conf" during parsing 2019-06-22 14:09:37,650 INFO Set uid to user 0 succeeded 2019-06-22 14:09:37,653 INFO supervisord started with pid 6 2019-06-22 14:09:38,657 INFO spawned: 'plexmediaserver' with pid 47 2019-06-22 14:09:38,657 INFO reaped unknown pid 7 2019-06-22 14:09:38,828 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23026837312120 for <Subprocess at 23026837312232 with name plexmediaserver in state STARTING> (stdout)> 2019-06-22 14:09:38,828 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23026837389384 for <Subprocess at 23026837312232 with name plexmediaserver in state STARTING> (stderr)> 2019-06-22 14:09:38,828 INFO exited: plexmediaserver (exit status 255; not expected) 2019-06-22 14:09:38,828 DEBG received SIGCHLD indicating a child quit 2019-06-22 14:09:39,831 INFO spawned: 'plexmediaserver' with pid 52 2019-06-22 14:09:40,115 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23026837253704 for <Subprocess at 23026837312232 with name plexmediaserver in state STARTING> (stdout)> 2019-06-22 14:09:40,115 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23026837390280 for <Subprocess at 23026837312232 with name plexmediaserver in state STARTING> (stderr)> 2019-06-22 14:09:40,115 INFO exited: plexmediaserver (exit status 255; not expected) 2019-06-22 14:09:40,115 DEBG received SIGCHLD indicating a child quit 2019-06-22 14:09:42,119 INFO spawned: 'plexmediaserver' with pid 57 2019-06-22 14:09:42,385 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23026837389384 for <Subprocess at 23026837312232 with name plexmediaserver in state STARTING> (stdout)> 2019-06-22 14:09:42,385 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23026837312288 for <Subprocess at 23026837312232 with name plexmediaserver in state STARTING> (stderr)> 2019-06-22 14:09:42,385 INFO exited: plexmediaserver (exit status 255; not expected) 2019-06-22 14:09:42,385 DEBG received SIGCHLD indicating a child quit 2019-06-22 14:09:45,391 INFO spawned: 'plexmediaserver' with pid 62 2019-06-22 14:09:45,658 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23026837389552 for <Subprocess at 23026837312232 with name plexmediaserver in state STARTING> (stdout)> 2019-06-22 14:09:45,658 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23026837390336 for <Subprocess at 23026837312232 with name plexmediaserver in state STARTING> (stderr)> 2019-06-22 14:09:45,658 INFO exited: plexmediaserver (exit status 255; not expected) 2019-06-22 14:09:45,659 DEBG received SIGCHLD indicating a child quit 2019-06-22 14:09:46,660 INFO gave up: plexmediaserver entered FATAL state, too many start retries too quickly Here are my settings: And here is the command: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='binhex-plexpass' --net='host' --log-opt max-size='50m' --log-opt max-file='1' -e TZ="America/Los_Angeles" -e HOST_OS="Unraid" -e 'TRANS_DIR'='/config/transcode' -e 'UMASK'='000' -e 'PUID'='99' -e 'PGID'='100' -v '/mnt/user/':'/media':'rw' -v '/mnt/user/Media/Movies':'/Movies/':'rw' -v '/mnt/user/Media/TV Shows':'/TV Shows/':'rw' -v '/mnt/user/Media/Music':'/Music/':'rw' -v '/mnt/user/appdata/binhex-plexpass':'/config':'rw' 'binhex/arch-plexpass' 96c0c216355dedaed1c10782643d6c17709de24562a69681a48d371a61320c8f The command finished successfully! Thanks for any help in advance! Quote Link to comment
trurl Posted June 22, 2019 Share Posted June 22, 2019 6 minutes ago, LumberJackGeek said: Here's the log: Here are my settings: Might be useful to have diagnostics also. Quote Link to comment
LumberJackGeek Posted June 22, 2019 Share Posted June 22, 2019 2 minutes ago, trurl said: Might be useful to have diagnostics also. Thanks for the reply! Do you have steps for this? I Can't even reach the WebUI for Plex. Quote Link to comment
trurl Posted June 22, 2019 Share Posted June 22, 2019 Just now, LumberJackGeek said: Thanks for the reply! Do you have steps for this? I Can't even reach the WebUI for Plex. https://forums.unraid.net/topic/37579-need-help-read-me-first/ Quote Link to comment
LumberJackGeek Posted June 22, 2019 Share Posted June 22, 2019 2 minutes ago, trurl said: https://forums.unraid.net/topic/37579-need-help-read-me-first/ dataserver2-diagnostics-20190622-2137.zip Here you go! I am going to look as well to see if I can learn anything... Quote Link to comment
socono Posted June 22, 2019 Share Posted June 22, 2019 On 6/21/2019 at 7:28 AM, djgizmo said: I'm having an odd issue wi th this specific docker where the WebUI menu option doesn't show un Unraid. All the other BinHex dockers show it just fine. Any suggestions? I'm working through the same problem. This started after the upgrade to 6.7.0 for me. I have 35 Docker containers on my list and about 5 of them no longer show the WebUI link in the drop down where they did before. Their Webui field in advance settings is defined and I've tried setting it to the actual link as well as using the http://[IP]:[PORT:8083]/ to no avail. Can't see anything in syslog or the Docker log that is complaining. Quote Link to comment
LumberJackGeek Posted June 23, 2019 Share Posted June 23, 2019 2 hours ago, LumberJackGeek said: dataserver2-diagnostics-20190622-2137.zip 126.54 kB · 1 download Here you go! I am going to look as well to see if I can learn anything... I don't see anything useful in these, but I don't really know what to look for Anyone? Quote Link to comment
djgizmo Posted June 23, 2019 Share Posted June 23, 2019 (edited) 11 hours ago, socono said: I'm working through the same problem. This started after the upgrade to 6.7.0 for me. I have 35 Docker containers on my list and about 5 of them no longer show the WebUI link in the drop down where they did before. Their Webui field in advance settings is defined and I've tried setting it to the actual link as well as using the http://[IP]:[PORT:8083]/ to no avail. Can't see anything in syslog or the Docker log that is complaining. misery loves company. glad its not just me. Edited June 23, 2019 by djgizmo Quote Link to comment
LumberJackGeek Posted June 24, 2019 Share Posted June 24, 2019 On 6/22/2019 at 5:37 PM, LumberJackGeek said: dataserver2-diagnostics-20190622-2137.zip 126.54 kB · 2 downloads Here you go! I am going to look as well to see if I can learn anything... Bump, any ideas on this? The gf is getting mad that Plex has been down for so long O_o Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.