mattekure Posted August 29, 2017 Share Posted August 29, 2017 I am getting the error Docker Application binhex-delugevpn, Container Port 58946 not found or changed on installed application but when I look into the binhex-delugevpn docker both the container port and host port are 58846 not 58946. Quote Link to comment
wgstarks Posted August 29, 2017 Share Posted August 29, 2017 6 minutes ago, mattekure said: I am getting the error Docker Application binhex-delugevpn, Container Port 58946 not found or changed on installed application but when I look into the binhex-delugevpn docker both the container port and host port are 58846 not 58946. Discussion starts here and then read the next few posts. May answer your question. 1 1 Quote Link to comment
wgstarks Posted September 3, 2017 Share Posted September 3, 2017 Docker Safe New Perms has stopped working for me. I've been having issues with the permissions for all items on the root of my cache. In the past I've been able to fix them using this script, but it's no longer having any effect. Now the only solution I've found is to reboot my server. I checked the log but saw nothing other than that the script had run (no details). Started another thread to try and eliminate whatever is causing the permissions issue, but it would be nice if I could find a simpler fix than having to reboot. Quote Link to comment
Squid Posted September 3, 2017 Author Share Posted September 3, 2017 4 hours ago, wgstarks said: Docker Safe New Perms has stopped working for me. I've been having issues with the permissions for all items on the root of my cache. In the past I've been able to fix them using this script, but it's no longer having any effect. Now the only solution I've found is to reboot my server. I checked the log but saw nothing other than that the script had run (no details). Started another thread to try and eliminate whatever is causing the permissions issue, but it would be nice if I could find a simpler fix than having to reboot. Script still works. But if you're having continual problems, then its some application (docker) that's writing files with the wrong permissions and/or you're using a Mac which I was helping a guy the other day where it was creating files with incorrect permissions via SMB Quote Link to comment
wgstarks Posted September 3, 2017 Share Posted September 3, 2017 2 minutes ago, Squid said: Script still works. After I run the script the permissions still haven't been repaired. Is there some log I could check for an error? 4 minutes ago, Squid said: But if you're having continual problems, then its some application (docker) that's writing files with the wrong permissions and/or you're using a Mac which I was helping a guy the other day where it was creating files with incorrect permissions via SMB I think you're right about the docker. Haven't figured out which one though. I do use macs but never noticed any issues with the files transferred from them. How could I tell if this was a problem? What was the fix? Quote Link to comment
Squid Posted September 4, 2017 Author Share Posted September 4, 2017 No fix. Permissions being written via a Mac via SMB on user A wouldn't allow user B to modify them (rw-r--r-- userX:users instead of (rw-rw-rw userX:users) as it'll be on a Win machine via SMB Since I don't use a Mac, I can't replicate therefore I can't issue a defect report myself. Quote Link to comment
wgstarks Posted September 4, 2017 Share Posted September 4, 2017 How can I check what the actual permissions are for files I'm writing from my macs? Quote Link to comment
wgstarks Posted September 4, 2017 Share Posted September 4, 2017 Just did a little test. Wrote a file to an unraid share via SMB to check permissions. root@Brunnhilde:/mnt/user/Media/Temp# ls -al total 112 drwxrwxrwx 1 nobody users 55 Sep 3 20:09 ./ drwxrwxrwx 1 nobody users 38 Sep 3 20:09 ../ -rw-rw-rw- 1 wgstarks users 107685 Jun 13 2016 NCSBA\ Honey\ Competition\ Rules.pdf I think this is proper, right? Quote Link to comment
wgstarks Posted September 4, 2017 Share Posted September 4, 2017 19 hours ago, Squid said: Script still works. But if you're having continual problems, then its some application (docker) that's writing files with the wrong permissions and/or you're using a Mac which I was helping a guy the other day where it was creating files with incorrect permissions via SMB Looks like you are absolutely correct. I've been doing some reading this morning (more still to do) and it looks like this was all caused by the way I was mounting the SMB shares on my Mac. The shares were originally set as private and I was connecting using user credentials. From what I have been reading this sets special permissions. I changed the shares to public with OS X support enabled and connect as guest and the problem is solved. I guess guest access uses nobody/users permissions. Quote Link to comment
Squid Posted September 4, 2017 Author Share Posted September 4, 2017 15 minutes ago, wgstarks said: Looks like you are absolutely correct. I've been doing some reading this morning (more still to do) and it looks like this was all caused by the way I was mounting the SMB shares on my Mac. The shares were originally set as private and I was connecting using user credentials. From what I have been reading this sets special permissions. I changed the shares to public with OS X support enabled and connect as guest and the problem is solved. I guess guest access uses nobody/users permissions. Open a defect report with the findings. Saving a file via a Mac with OSX interoperability enabled should result in --rw-rw-rw username:users I would, but nobody's ever supplied me with a valid OSX image for a VM that I could get to work. Quote Link to comment
ljm42 Posted September 4, 2017 Share Posted September 4, 2017 Just a heads up, I formatted a disk as encrypted XFS in 6.4.0-rc8q and FCP wasn't happy with me: Error: Disk disk1 is formatted as luks:xfs Not complaining, it is a new rc after all Quote Link to comment
wgstarks Posted September 4, 2017 Share Posted September 4, 2017 Now I'm totally confused. Here's what I got with a file written with anonymous login- Brunnhilde login: root Password: Linux 4.9.30-unRAID. Last login: Mon Sep 4 12:09:10 -0400 2017 on /dev/pts/0 from 10.0.1.190. root@Brunnhilde:~# cd /mnt/user/Media/Temp root@Brunnhilde:/mnt/user/Media/Temp# ls -al total 112 drwxrwxrwx 1 nobody users 47 Sep 4 15:17 ./ drwxrwxrwx 1 nobody users 30 Sep 4 15:17 ../ -rw-r--r-- 1 nobody users 107685 Jun 13 2016 NCSBA\ Honey\ Competition\ Rules.pdf root@Brunnhilde:/mnt/user/Media/Temp# Same file created with my user login- Brunnhilde login: root Password: Linux 4.9.30-unRAID. Last login: Mon Sep 4 15:18:06 -0400 2017 on /dev/pts/0 from 10.0.1.190. root@Brunnhilde:~# cd /mnt/user/Media/Temp root@Brunnhilde:/mnt/user/Media/Temp# ls -al total 112 drwxrwxrwx 1 nobody users 47 Sep 4 15:25 ./ drwxrwxrwx 1 nobody users 50 Sep 4 15:24 ../ -rw-r--r-- 1 wgstarks users 107685 Jun 13 2016 NCSBA\ Honey\ Competition\ Rules.pdf root@Brunnhilde:/mnt/user/Media/Temp# Quote Link to comment
Squid Posted September 4, 2017 Author Share Posted September 4, 2017 6 minutes ago, ljm42 said: Just a heads up, I formatted a disk as encrypted XFS in 6.4.0-rc8q and FCP wasn't happy with me: Error: Disk disk1 is formatted as luks:xfs Not complaining, it is a new rc after all I blame @limetech @anyone or @johnnie.black So that I don't make any assumptions here, is the file system of an encrypted disk within disk.ini listed as luks:xfs, luks:btrfs, luks:reiserfs? 1 Quote Link to comment
bonienl Posted September 4, 2017 Share Posted September 4, 2017 Here answer from @anyone: yes. 1 Quote Link to comment
Squid Posted September 4, 2017 Author Share Posted September 4, 2017 1 minute ago, wgstarks said: Now I'm totally confused. Here's what I got with a file written with anonymous login- Brunnhilde login: root Password: Linux 4.9.30-unRAID. Last login: Mon Sep 4 12:09:10 -0400 2017 on /dev/pts/0 from 10.0.1.190. root@Brunnhilde:~# cd /mnt/user/Media/Temp root@Brunnhilde:/mnt/user/Media/Temp# ls -al total 112 drwxrwxrwx 1 nobody users 47 Sep 4 15:17 ./ drwxrwxrwx 1 nobody users 30 Sep 4 15:17 ../ -rw-r--r-- 1 nobody users 107685 Jun 13 2016 NCSBA\ Honey\ Competition\ Rules.pdf root@Brunnhilde:/mnt/user/Media/Temp# Same file created with my user login- Brunnhilde login: root Password: Linux 4.9.30-unRAID. Last login: Mon Sep 4 15:18:06 -0400 2017 on /dev/pts/0 from 10.0.1.190. root@Brunnhilde:~# cd /mnt/user/Media/Temp root@Brunnhilde:/mnt/user/Media/Temp# ls -al total 112 drwxrwxrwx 1 nobody users 47 Sep 4 15:25 ./ drwxrwxrwx 1 nobody users 50 Sep 4 15:24 ../ -rw-r--r-- 1 wgstarks users 107685 Jun 13 2016 NCSBA\ Honey\ Competition\ Rules.pdf root@Brunnhilde:/mnt/user/Media/Temp# Both permissions are incorrect on the Honey Competition. (I want to believe that its something Bee related, but secretly I'm hoping that by Honey Competition, you're comparing wives ) If I could, I would do a defect report. But I don't feel comfortable doing that at this point since I cannot replicate via a Windows system. Quote Link to comment
Squid Posted September 4, 2017 Author Share Posted September 4, 2017 1 minute ago, bonienl said: Here answer from @anyone: yes. You're the best @anyone! 1 Quote Link to comment
wgstarks Posted September 4, 2017 Share Posted September 4, 2017 (edited) How do I do a defect report? Edit- Nevermind. Found it. Edited September 4, 2017 by wgstarks Quote Link to comment
bonienl Posted September 4, 2017 Share Posted September 4, 2017 (edited) 6 minutes ago, Squid said: You're the best @anyone! Here another reply from @anyone, and maybe interesting for FCP. There is a new disk parameter "luksState" which indicates the encryption state. 0: no encryption present 1: disk is correctly encrypted 2: missing encryption key 3: wrong encryption key other value: unknown error Edited September 4, 2017 by bonienl Quote Link to comment
Squid Posted September 4, 2017 Author Share Posted September 4, 2017 7 minutes ago, bonienl said: Here another reply from @anyone, and maybe interesting for FCP. There is a new disk parameter "luksState" which indicates the encryption state. 0: no encryption present 1: disk is correctly encrypted 2: missing encryption key 3: wrong encryption key other value: unknown error Sure, tell me after I update the plugin. I'll have to create an unRaid VM to play around and see all of this. Quote Link to comment
ljm42 Posted September 4, 2017 Share Posted September 4, 2017 That was fast! Thanks @Squid, No more complaints from FCP about the disk format Quote Link to comment
Squid Posted September 4, 2017 Author Share Posted September 4, 2017 11 minutes ago, ljm42 said: That was fast! Thanks @Squid, No more complaints from FCP about the disk format My attitude on issues: 1 Quote Link to comment
squirrellydw Posted October 1, 2017 Share Posted October 1, 2017 I have this error, I have mcelroy installed but not sure how to get to it. Your server has detected hardware errors. You should install mcelog via the NerdPack plugin, post your diagnostics and ask for assistance on the unRaid forums. The output of mcelog (if installed) has been logged Quote Link to comment
Squid Posted October 1, 2017 Author Share Posted October 1, 2017 Install the nerd pack plugin via the apps tab. Set need pack to install mcelog. Reboot and wait for the error again Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.