alturismo Posted May 23, 2019 Share Posted May 23, 2019 On 5/12/2019 at 9:42 AM, suyac said: thanks for your answer it is for personal usage but adding user password to the generated url doesn t work either eg : https://user:password@myserver.com:443/stream/channelid/42343218?profile=pass ok, tested again out of interest and its working fine here with vlc and m3u playlist through reverse proxy, just as note. Quote Link to comment
psycmos Posted June 22, 2019 Share Posted June 22, 2019 I updated to Unraid 6.7 but i lost transcoding. So i revered back to Unraid 6.6.6 and now are working good again. So, somebody can give me the best place to report that issue? Others user with PLEX are reporting the same issue in newer version of unraid 6.7 ( Transcoding with VAAPI not working). https://forums.plex.tv/t/cant-get-plex-hw-transcoding-to-work-with-docker-unraid-6-7-0/424489/2 Quote Link to comment
saarg Posted June 22, 2019 Share Posted June 22, 2019 11 minutes ago, psycmos said: I updated to Unraid 6.7 but i lost transcoding. So i revered back to Unraid 6.6.6 and now are working good again. So, somebody can give me the best place to report that issue? Others user with PLEX are reporting the same issue in newer version of unraid 6.7 ( Transcoding with VAAPI not working). https://forums.plex.tv/t/cant-get-plex-hw-transcoding-to-work-with-docker-unraid-6-7-0/424489/2 Why are you posting in the tvheadend thread if you have issues with plex? 1 Quote Link to comment
psycmos Posted June 22, 2019 Share Posted June 22, 2019 (edited) 4 minutes ago, saarg said: Why are you posting in the tvheadend thread if you have issues with plex? Sorry, i'm using TVheadend but i found other reports with plex saying the same issue like me in TVH after update to 6.7. To get transcoding working again in TVH i need revert back to unraid 6.6.6 and it comes working again. I found it interesting to share PLEX too, to report that not happen only in TVH Edited June 22, 2019 by psycmos Quote Link to comment
saarg Posted June 22, 2019 Share Posted June 22, 2019 12 minutes ago, psycmos said: Sorry, i'm using TVheadend but i found other reports with plex saying the same issue like me in TVH after update to 6.7. To get transcoding working again in TVH i need revert back to unraid 6.6.6 and it comes working again. I found it interesting to share PLEX too, to report that not happen only in TVH You need to explain what is happening in TVheadend and not plex. This has most likely nothing to do with the container. Probably something with unraid. Please don't post multiple places about the same issue. The correct place for tvheadend unraid issues are in this thread, not github. So please provide info about how this is set up and logs from unraid and tvheadend. Does the same thing happen in plex for you? Do you see the /dev/dri device inside the container and what is the permissions in both unraid and container. 1 Quote Link to comment
psycmos Posted June 23, 2019 Share Posted June 23, 2019 On 6/22/2019 at 3:16 PM, saarg said: You need to explain what is happening in TVheadend and not plex. This has most likely nothing to do with the container. Probably something with unraid. Please don't post multiple places about the same issue. The correct place for tvheadend unraid issues are in this thread, not github. So please provide info about how this is set up and logs from unraid and tvheadend. Does the same thing happen in plex for you? Do you see the /dev/dri device inside the container and what is the permissions in both unraid and container. I can confirm that's an Unraid issue because other topics that's are opened at this forum. My setup is J4105M (Board with processor). _______________________________________________________________________________ My Configs for transcoding at TVheadend: syslinux.cfg: label unRAID OS menu default kernel /bzimage append pci=realloc=off initrd=/bzroot At file Flash/Config/GO i used #Setup drivers for hardware transcoding modprobe i915 chown -R nobody:users /dev/dri chmod -R 777 /dev/dri #!/bin/bash # Start the Management Utility /usr/local/sbin/emhttp & In DOCKER TVHEADEND use [ --device=/dev/dvb --device=/dev/dri:/dev/dri] under extra parameters _______________________________________________________________________________________ I can see the device i915 v1.6.0 (/dev/dri/renderD128). I think i will move this issue to General support because other users report this too in Unraid 6.7 About unraid logs, how can i get it? Quote Link to comment
alturismo Posted June 24, 2019 Share Posted June 24, 2019 here its looking all good with hw transcoding, tested in tvh and plex, just as note. unraid 671, i7 8700, intel gpu, HTS Tvheadend 4.3-1795~g771dfd6be Quote Link to comment
saarg Posted June 24, 2019 Share Posted June 24, 2019 9 hours ago, psycmos said: I can confirm that's an Unraid issue because other topics that's are opened at this forum. My setup is J4105M (Board with processor). _______________________________________________________________________________ My Configs for transcoding at TVheadend: syslinux.cfg: label unRAID OS menu default kernel /bzimage append pci=realloc=off initrd=/bzroot At file Flash/Config/GO i used #Setup drivers for hardware transcoding modprobe i915 chown -R nobody:users /dev/dri chmod -R 777 /dev/dri #!/bin/bash # Start the Management Utility /usr/local/sbin/emhttp & In DOCKER TVHEADEND use [ --device=/dev/dvb --device=/dev/dri:/dev/dri] under extra parameters _______________________________________________________________________________________ I can see the device i915 v1.6.0 (/dev/dri/renderD128). I think i will move this issue to General support because other users report this too in Unraid 6.7 About unraid logs, how can i get it? Logs are in the diagnostics in tools. Just post the complete diagnostics.zip. Also post the output of ls -al /dev/dri in both unraid and the container. Quote Link to comment
Ramiii Posted August 6, 2019 Share Posted August 6, 2019 I have everything up and running thanks to this post and all the correct configuration , just one small question , how do I access the Picons folder ? I'm new to Unraid and still on the trial period I can add Picons using URL directly from the internet but I prefer to add them to the local Picons folder Thanks Rami Quote Link to comment
allanp81 Posted August 6, 2019 Share Posted August 6, 2019 Mine are configured as file:///picons/%C.png Quote Link to comment
Ramiii Posted August 6, 2019 Share Posted August 6, 2019 Mine too. But how do I copy files to this folder ? FTP ? Quote Link to comment
j0nnymoe Posted August 6, 2019 Share Posted August 6, 2019 We add all the icons from `https://www.picons.eu/` Though if you want to create your own blank set, create an additional mount for `/picons` on the tvheadend container page and point it to your own folder which will allow you to maintain your own icons. This will obviously not use the included icons. Quote Link to comment
Ramiii Posted August 6, 2019 Share Posted August 6, 2019 Thank you Let me explain what I want to do. I’m good with the Picons included but I’m missing some of the channels since I’m in Egypt and they are not included. How do I add them ? Quote Link to comment
j0nnymoe Posted August 6, 2019 Share Posted August 6, 2019 40 minutes ago, Ramiii said: Thank you Let me explain what I want to do. I’m good with the Picons included but I’m missing some of the channels since I’m in Egypt and they are not included. How do I add them ? You would need to add them upstream (picons.eu) so they get picked up by us. Otherwise, you'll have to re-add them everytime the image updates. Quote Link to comment
Ramiii Posted August 6, 2019 Share Posted August 6, 2019 Ok got it. Now I added a couple directly from the internet. I added the image URL and it worked. How do I send them to picons.ru ? Quote Link to comment
j0nnymoe Posted August 6, 2019 Share Posted August 6, 2019 8 minutes ago, Ramiii said: Ok got it. Now I added a couple directly from the internet. I added the image URL and it worked. How do I send them to picons.ru ? Check their site at https://www.picons.eu/ You'll probably need to submit them via their github. Quote Link to comment
Ramiii Posted August 6, 2019 Share Posted August 6, 2019 Thanks again. Sent them on github. I can submit the missing picons for other people to use Quote Link to comment
Richie12a Posted August 23, 2019 Share Posted August 23, 2019 Hi Having an issue getting tvh to recognize my iptv service ...something that was working before the last update....I get an error : Couldn't start streaming /blah blah blah, No assigned adapters Darned if I can figure out how to assign the IPTV network as the adapter... I'm obviously missing something too simple for me to find! Any thoughts out there? Quote Link to comment
saarg Posted August 23, 2019 Share Posted August 23, 2019 9 minutes ago, Richie12a said: Hi Having an issue getting tvh to recognize my iptv service ...something that was working before the last update....I get an error : Couldn't start streaming /blah blah blah, No assigned adapters Darned if I can figure out how to assign the IPTV network as the adapter... I'm obviously missing something too simple for me to find! Any thoughts out there? Which version are you using? Release-4.2 or latest? You can try to use an earlier tag, which you can find on the docker hub page. IPTV doesn't need an adapter, so something is not as it should. Quote Link to comment
tdse Posted October 6, 2019 Share Posted October 6, 2019 Is it possible to set up a buffer for the docker image? When using a raspi with tvheadend and buffer I can watch TV without interruption. However, with the docker image it does not work without buffering on my mobil devices (Apple TV, iPhone, and iPad). The apps for Apple products do not offer a buffer. Thank you. Quote Link to comment
saarg Posted October 6, 2019 Share Posted October 6, 2019 2 hours ago, tdse said: Is it possible to set up a buffer for the docker image? When using a raspi with tvheadend and buffer I can watch TV without interruption. However, with the docker image it does not work without buffering on my mobil devices (Apple TV, iPhone, and iPad). The apps for Apple products do not offer a buffer. Thank you. I do not understand what you mean by buffer. If it's something you do in tvheadend, you can do the same in the container. Quote Link to comment
tdse Posted October 6, 2019 Share Posted October 6, 2019 It is not directly related to tvheadend. In kodi you can setup a buffer / cache to avoid buffering. When using tvheadend from inside kodi you avoid buffering. What I am looking for is a similar buffer / cache for the docker image. Quote Link to comment
saarg Posted October 6, 2019 Share Posted October 6, 2019 59 minutes ago, tdse said: It is not directly related to tvheadend. In kodi you can setup a buffer / cache to avoid buffering. When using tvheadend from inside kodi you avoid buffering. What I am looking for is a similar buffer / cache for the docker image. Apart from time shift, there are no options to set up a buffer. If you get buffering on your devices, there is something wrong with your setup somewhere. If you are not transcoding the streams, then it might be your network is too slow. If you are transcoding, your CPU might be too slow. Quote Link to comment
tdse Posted October 7, 2019 Share Posted October 7, 2019 There is no transcoding involved. On my Raspi II tvheadend works like a charm without any buffering at all. The same channels on my more powerful server show very heavy buffering after 1 second all the time. CPU and RAM are OK. (16 % CPU and 1,4 GB out of 4 for the entire system and for tvheadend 98 MB RAM and almost no CPU). Quote Link to comment
saarg Posted October 7, 2019 Share Posted October 7, 2019 4 minutes ago, tdse said: There is no transcoding involved. On my Raspi II tvheadend works like a charm without any buffering at all. The same channels on my more powerful server show very heavy buffering after 1 second all the time. CPU and RAM are OK. (16 % CPU and 1,4 GB out of 4 for the entire system and for tvheadend 98 MB RAM and almost no CPU). If you only have 4 GB ram for the server, that might be the issue. You have to remember that unraid also use ram and other applications also. Could also be your network. If you have a realtek network card, they are known to have poor performance on linux. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.