March 4, 20197 yr On 2/23/2019 at 5:44 PM, Squid said: Sab is currently saving the files into /config not /downloads. Probably in the paths section of Sab's UI, you're telling it to save it to downloads not /downloads (IIRC, sab has a message that says that all folders are relative based on its home folder. To set a non-relative folder you need the leading slash) Thanks @Squid that solved my problem o7
March 10, 20197 yr I have a problem, that might just be a "newbie" thing Setting up Sonarr went without any problem but Radar gives me an error on a remote shared drive "Folder is not writable by user abc" It's a drive shared in the docker from unasigned devices as Slave R/W is this the problem?
March 10, 20197 yr I have a problem, that might just be a "newbie" thing Setting up Sonarr went without any problem but Radar gives me an error on a remote shared drive "Folder is not writable by user abc" It's a drive shared in the docker from unasigned devices as Slave R/W is this the problem? What format is that drive?Sent via telekinesis
March 10, 20197 yr 22 minutes ago, Squid said: What format is that drive? Sent via telekinesis Its a Synology shared drive in BTRFS
March 15, 20197 yr does anyone else get really high CPU usage from RADARR? I am getting 40-50% CPU usage idling from RADARR.
March 15, 20197 yr top - 18:34:28 up 6 days, 11:52, 0 users, load average: 7.49, 6.33, 6.69 Tasks: 6 total, 1 running, 5 sleeping, 0 stopped, 0 zombie %Cpu(s): 27.6 us, 31.5 sy, 0.0 ni, 36.7 id, 2.2 wa, 0.0 hi, 2.0 si, 0.0 st KiB Mem : 16109520 total, 285872 free, 3157732 used, 12665916 buff/cache KiB Swap: 0 total, 0 free, 0 used. 10459472 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 206 abc 20 0 1932576 635384 37080 S 91.0 3.9 10:45.07 mono 1 root 20 0 204 4 0 S 0.0 0.0 0:00.01 s6-svscan 31 root 20 0 204 4 0 S 0.0 0.0 0:00.00 s6-supervise 204 root 20 0 204 4 0 S 0.0 0.0 0:00.00 s6-supervise 252 root 20 0 4504 704 636 S 0.0 0.0 0:00.01 sh 261 root 20 0 38296 3588 3128 R 0.0 0.0 0:00.00 top Edited March 15, 20197 yr by pyrater
March 15, 20197 yr On 3/10/2019 at 10:35 PM, casperse said: It's a Synology shared drive in BTRFS @Squid Any insight in what I could try? The volume is mounted and working, somehow Radarr just doesn't want to write in the Synology folder
March 15, 20197 yr [mention=10290]Squid[/mention] Any insight in what I could try? The volume is mounted and working, somehow Radarr just doesn't want to write in the Synology folderI have no problems with connecting radar to smb shares at all, so noSent via telekinesis
March 18, 20197 yr On 3/15/2019 at 11:22 AM, Squid said: I have no problems with connecting radar to smb shares at all, so no Sent via telekinesis Do I need to create a Nobody user account? (The mounted drives using UAD is done with a user that have write access!)
March 18, 20197 yr On 3/14/2019 at 8:08 PM, pyrater said: does anyone else get really high CPU usage from RADARR? I am getting 40-50% CPU usage idling from RADARR. I had this issue with the linuxserver.io image, but I don't run unRaid. For myself, the issue was having the "MONO_TLS_PROVIDER: legacy" environmental variable enabled. As soon as I disabled that and restarted the container it began working again. I don't know if that's your issue, but since I fire up radarr with a docker-compose file I simply commented out that line in my "environment" section and did a docker-compose restart and all went back to normal. I just opened this account to give you feedback in case you hadn't resolved it yet. Your post was the only reference I could find on google to this radarr docker high cpu usage issue in the past month. Edited March 18, 20197 yr by noobgoldberg
March 19, 20197 yr 12 hours ago, casperse said: Do I need to create a Nobody user account? (The mounted drives using UAD is done with a user that have write access!) SOLUTION: On a older version of UAD 4-6 weeks ago I had to mount all my drives using the IP address (Same user and access rights) The new updated one I don't have to write any IP it finds the Host-name and then everything works! (Old Bug?)
April 27, 20197 yr Quick question that I may have missed so apologies in advance. Looking for the proper way to setup Radarr to use the standard unraid recycle bin plug-in by dlandon rather than pointing to a empty folder then manually deleting from there. Any assistance with this is greatly appreciated.
May 1, 20197 yr Just installed radarr. It keeps complaining though I've cleared out the appdata/radarr folder many times and restart this thing... [v0.2.0.980] NzbDrone.Core.Datastore.CorruptDatabaseException: Database file: /config/nzbdrone.db is corrupt, restore from backup if available. See: https://github.com/Radarr/Radarr/wiki/FAQ#i-am-getting-an-error-database-disk-image-is-malformed ---> System.Data.SQLite.SQLiteException: disk I/O error disk I/O error Any hints would be appreciated.
May 1, 20197 yr On 1/9/2018 at 12:14 AM, wh0_cares said: Thank you. I just tested this today and it worked, NZB started a 30.8GB download at 5:25 and at 5:59 it finished then Radarr imported within 5 seconds.I had a feeling it might have been the docker mounts. For NZBGet I changed /downloads (/mnt/user/Downloads) to /data (/mnt/user/) and changed the MainDir path to /data/Downloads. For Radarr I removed /downloads (/mnt/user/Downloads), changed /movies (/mnt/user/Movies) to /data (/mnt/user/) and fixed the movie path to /data/Movies. I also did this for Sonarr and everything is working perfect with cache also @wh0_cares I am in kind of the same situation, and I need some help increasing speed of copying (It takes hours, when Radarr copies after sort and renaming) My Movie folder is on a different system and mounted correctly (Ping enabled etc) My download folder is using the cash drive M2 and move is done nightly (So they should already be gone before move is initiated) Appdata is Cash only Download cash Yes Radarr mappings: It's not the network speed, copying from UNraid to the Mounted folder by PC or binhex-krusader works quick and without problems - Radarr just don't like mounted volumes? As always any input or things I can try is most welcome 🙂
May 1, 20197 yr 7 hours ago, daze said: Just installed radarr. It keeps complaining though I've cleared out the appdata/radarr folder many times and restart this thing... [v0.2.0.980] NzbDrone.Core.Datastore.CorruptDatabaseException: Database file: /config/nzbdrone.db is corrupt, restore from backup if available. See: https://github.com/Radarr/Radarr/wiki/FAQ#i-am-getting-an-error-database-disk-image-is-malformed ---> System.Data.SQLite.SQLiteException: disk I/O error disk I/O error Any hints would be appreciated. Do you use /mnt/user for the /config mount?
May 1, 20197 yr 10 hours ago, casperse said: @wh0_cares I am in kind of the same situation, and I need some help increasing speed of copying (It takes hours, when Radarr copies after sort and renaming) My Movie folder is on a different system and mounted correctly (Ping enabled etc) My download folder is using the cash drive M2 and move is done nightly (So they should already be gone before move is initiated) Appdata is Cash only Download cash Yes Radarr mappings: It's not the network speed, copying from UNraid to the Mounted folder by PC or binhex-krusader works quick and without problems - Radarr just don't like mounted volumes? As always any input or things I can try is most welcome 🙂 I found a permission error in the log file from Radarr and removed change permission in my setup. But transfer is still really really slow, this is 561MB at 17:06 and the file was created 16:46 = 20 min! Are my mount point wrong? Update: now 3 hours later still executing the transfer Diagnostic files:diagnostics-20190501-1756.zip Edited May 1, 20197 yr by casperse
May 2, 20197 yr 15 hours ago, saarg said: Do you use /mnt/user for the /config mount? Yes, and I changed it after you asked and it started! Thanks!!!
May 5, 20197 yr I seem to be having a path issue. It gets to the completed directory OK, but it won't import and fails with this error Import failed, Quote path does not exist or is not accessible by Radarr: /data/complete/Destroyer (2018) (1080p BluRay x265 10bit Tigole) English/ yet that path exists in the container and I can get to it. Same issue with Sonarr as well. I switched from binhex to this because of some crazy high CPU usage. 50% even when radarr was off.
May 5, 20197 yr 55 minutes ago, dbinott said: I seem to be having a path issue. It gets to the completed directory OK, but it won't import and fails with this error Import failed, yet that path exists in the container and I can get to it. Same issue with Sonarr as well. I switched from binhex to this because of some crazy high CPU usage. 50% even when radarr was off. 10:1 its this:https://forums.unraid.net/topic/57181-real-docker-faq/page/2/#comment-566086
May 5, 20197 yr 14 minutes ago, Squid said: 10:1 its this:https://forums.unraid.net/topic/57181-real-docker-faq/page/2/#comment-566086 Wow, awesome information. Thanks. One recommendation, put the actual error message in the post. That's what I searched on and I don't believe that FAQ came up.
May 22, 20197 yr So I'm having the same issue as others here. I'm running a manual import for a movie and processing is under 1MB/sec. /data is mapped to /mnt/user/Downloads /media is mapped to /mnt/user/media/Movies SAB is dropping the files in /mnt/user/Downloads/Complete If I manually import a completed .mkv, it's successful, but can take hours. Do I have the mappings wrong? I've read the posts about copy/delete vs move, but I'm afraid I'm too dense to understand the resolution...
May 30, 20197 yr Hi, is there a docker friendly way of configuring SSL for Sonarr and Radarr? See: https://github.com/Sonarr/Sonarr/wiki/SSL#linux--os-x Yes, I do run a SSL frontend Nginx server for external access, but I also want my internal direct access to be SSL. With docker friendly, I mean a way to copy a crt and key file, or a pem file, or a pfx file, really any static way pointing at cert files, vs. having to run code in the container, after every update.
May 30, 20197 yr 6 hours ago, ptr727 said: Hi, is there a docker friendly way of configuring SSL for Sonarr and Radarr? See: https://github.com/Sonarr/Sonarr/wiki/SSL#linux--os-x Yes, I do run a SSL frontend Nginx server for external access, but I also want my internal direct access to be SSL. With docker friendly, I mean a way to copy a crt and key file, or a pem file, or a pfx file, really any static way pointing at cert files, vs. having to run code in the container, after every update. Just configure your DNS to allow you to use your reverse proxy internally? We don't support putting SSL directly on the container.
June 15, 20197 yr I see a lot of people have posted about this, there's even a FAQ, and I think I have it configured correctly, however I am still failing to import? Radarr: Deluge: Deluge: "Import failed, path does not exist or is not accessible by Radarr: /Downloads/Complete/[Movie Folder Name] I must be missing something because I get the same error for Sonarr. Thanks for any help you all can provide!
June 15, 20197 yr Linux is case sensitive. You've got mapped and Deluge is putting stuff in /Downloads, but radarr has mapped /downloads. Different folders. Change the container path on one or the other to match
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.