[Support] SpaceinvaderOne - Macinabox

[chocorem]

Hello,

 

quick Question : I had an Monterey VM with a 6600xt passthrough created by macinabox. I added agdpmod=pikera  to get the display working

 

I update the opencore to the latest version and changed the xml command line to this

 

 <qemu:commandline>
    <qemu:arg value='-usb'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='usb-kbd,bus=usb-bus.0'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='************************'/>
    <qemu:arg value='-smbios'/>
    <qemu:arg value='type=2'/>
    <qemu:arg value='-global'/>
    <qemu:arg value='ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off'/>
    <qemu:arg value='-global'/>
    <qemu:arg value='nec-usb-xhci.msi=off'/>
    <qemu:arg value='-cpu'/>
    <qemu:arg value='Haswell-noTSX,vendor=GenuineIntel,+invtsc,+hypervisor,kvm=on,vmware-cpuid-freq=on,+avx,+avx2,+ssse3,+sse4.2,+popcnt,+aes,+fma,+bmi1,+bmi2,+xsave,+xsaveopt,+rdrand,+kvm_pv_eoi,check'/>
  </qemu:commandline>

 

After that I upgraded to sonoma and the VM starts without problem, but I cannot get the GPU working.

 

I notice that maps is not working which is the symptom that hardware acceleration is not activated. Of course no external display.

 

All is working well with VNC ( but slow )

 

I tried to upgrade the lilu.ktxt and the whatevergreen.ktxt to the latest version, but no way to get the GPU working.

 

Am I missing something ?

[Moniker Lewinski]

EDIT: updated the container and it now runs perfectly

 

-------------------------------------------------------

 

Hi all,

 

I hope this post is in the correct place and is intelligible

 

I followed all instructions and as far as I can see my XML is fine and I also ran and re-ran the new macinabox which I think was updated yesterday.

 

I am getting the "Guest has not initialized the display (yet)."

 

My server is running on 12th Gen Intel® Core™ i5-12400 @ 2475 MHz, 32GB RAM. UNRAID 6.12.13.

 

I'm giving it 8 of 12 cores...

 

I'll include my XML (minus the key) and after this the VM log.

 

<?xml version='1.0' encoding='UTF-8'?>
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
  <name>Sonoma</name>
  <uuid>6bf37a5a-94f8-42bc-9a3d-62049fe4330b</uuid>
  <metadata>
    <vmtemplate xmlns="unraid" icon="macinabox.png" os="osx" webui="" name="Linux"/>
  </metadata>
  <memory unit='KiB'>8388608</memory>
  <currentMemory unit='KiB'>8388608</currentMemory>
  <memoryBacking>
    <nosharepages/>
  </memoryBacking>
  <vcpu placement='static'>8</vcpu>
  <cputune>
    <vcpupin vcpu='0' cpuset='2'/>
    <vcpupin vcpu='1' cpuset='3'/>
    <vcpupin vcpu='2' cpuset='6'/>
    <vcpupin vcpu='3' cpuset='7'/>
    <vcpupin vcpu='4' cpuset='8'/>
    <vcpupin vcpu='5' cpuset='9'/>
    <vcpupin vcpu='6' cpuset='10'/>
    <vcpupin vcpu='7' cpuset='11'/>
  </cputune>
  <os>
    <type arch='x86_64' machine='pc-q35-7.2'>hvm</type>
    <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader>
    <nvram>/etc/libvirt/qemu/nvram/6bf37a5a-94f8-42bc-9a3d-62049fe4330b_VARS-pure-efi.fd</nvram>
  </os>
  <features>
    <acpi/>
    <apic/>
  </features>
  <cpu mode='host-passthrough' check='none' migratable='on'>
    <topology sockets='1' dies='1' cores='4' threads='2'/>
    <cache mode='passthrough'/>
  </cpu>
  <clock offset='utc'>
    <timer name='rtc' tickpolicy='catchup'/>
    <timer name='pit' tickpolicy='delay'/>
    <timer name='hpet' present='no'/>
  </clock>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>restart</on_crash>
  <devices>
    <emulator>/usr/local/sbin/qemu</emulator>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw' cache='writeback'/>
      <source file='/mnt/user/domains/Sonoma/Sonoma-opencore.img'/>
      <target dev='hdc' bus='sata'/>
      <serial>vdisk1</serial>
      <boot order='1'/>
      <address type='drive' controller='0' bus='0' target='0' unit='2'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw' cache='writeback'/>
      <source file='/mnt/user/isos/Sonoma-install.img'/>
      <target dev='hdd' bus='sata'/>
      <serial>vdisk2</serial>
      <address type='drive' controller='0' bus='0' target='0' unit='3'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw' cache='writeback'/>
      <source file='/mnt/user/domains/Sonoma/macos_disk.img'/>
      <target dev='hde' bus='sata'/>
      <serial>vdisk3</serial>
      <address type='drive' controller='0' bus='0' target='0' unit='4'/>
    </disk>
    <controller type='pci' index='0' model='pcie-root'/>
    <controller type='pci' index='1' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='1' port='0x8'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0' multifunction='on'/>
    </controller>
    <controller type='pci' index='2' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='2' port='0x9'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
    </controller>
    <controller type='pci' index='3' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='3' port='0x11'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/>
    </controller>
    <controller type='pci' index='4' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='4' port='0x12'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/>
    </controller>
    <controller type='pci' index='5' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='5' port='0x13'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/>
    </controller>
    <controller type='pci' index='6' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='6' port='0x14'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x4'/>
    </controller>
    <controller type='pci' index='7' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='7' port='0xa'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
    </controller>
    <controller type='pci' index='8' model='pcie-to-pci-bridge'>
      <model name='pcie-pci-bridge'/>
      <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
    </controller>
    <controller type='virtio-serial' index='0'>
      <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
    </controller>
    <controller type='sata' index='0'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/>
    </controller>
    <controller type='usb' index='0' model='ich9-ehci1'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci1'>
      <master startport='0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci2'>
      <master startport='2'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci3'>
      <master startport='4'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/>
    </controller>
    <interface type='bridge'>
      <mac address='ac:87:a3:5b:17:2f'/>
      <source bridge='br0'/>
      <model type='virtio-net'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
    </interface>
    <serial type='pty'>
      <target type='isa-serial' port='0'>
        <model name='isa-serial'/>
      </target>
    </serial>
    <console type='pty'>
      <target type='serial' port='0'/>
    </console>
    <channel type='unix'>
      <target type='virtio' name='org.qemu.guest_agent.0'/>
      <address type='virtio-serial' controller='0' bus='0' port='1'/>
    </channel>
    <input type='tablet' bus='usb'>
      <address type='usb' bus='0' port='1'/>
    </input>
    <input type='mouse' bus='ps2'/>
    <input type='keyboard' bus='ps2'/>
    <graphics type='vnc' port='-1' autoport='yes' websocket='-1' listen='0.0.0.0' keymap='en-us'>
      <listen type='address' address='0.0.0.0'/>
    </graphics>
    <audio id='1' type='none'/>
    <video>
      <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/>
      <address type='pci' domain='0x0000' bus='0x08' slot='0x01' function='0x0'/>
    </video>
    <memballoon model='virtio'>
      <address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x0'/>
    </memballoon>
  </devices>
  <qemu:commandline>
    <qemu:arg value='-device'/>
    <qemu:arg value='isa-applesmc,osk=thisiswherethekeygoeswedontpostontheforums'/>
    <qemu:arg value='-smbios'/>
    <qemu:arg value='type=2'/>
    <qemu:arg value='-usb'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='usb-tablet'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='usb-kbd'/>
    <qemu:arg value='-cpu'/>
    <qemu:arg value='Skylake-Server,vendor=GenuineIntel,+hypervisor,+invtsc,kvm=on,+fma,+avx,+avx2,+aes,+ssse3,+sse4_2,+popcnt,+sse4a,+bmi1,+bmi2'/>
  </qemu:commandline>
</domain>

 

2024-09-23 07:26:14.777+0000: starting up libvirt version: 8.7.0, qemu version: 7.2.0, kernel: 6.1.106-Unraid, hostname: Reliquary
LC_ALL=C \
PATH=/bin:/sbin:/usr/bin:/usr/sbin \
HOME=/var/lib/libvirt/qemu/domain-3-Sonoma \
XDG_DATA_HOME=/var/lib/libvirt/qemu/domain-3-Sonoma/.local/share \
XDG_CACHE_HOME=/var/lib/libvirt/qemu/domain-3-Sonoma/.cache \
XDG_CONFIG_HOME=/var/lib/libvirt/qemu/domain-3-Sonoma/.config \
/usr/local/sbin/qemu \
-name guest=Sonoma,debug-threads=on \
-S \
-object '{"qom-type":"secret","id":"masterKey0","format":"raw","file":"/var/lib/libvirt/qemu/domain-3-Sonoma/master-key.aes"}' \
-blockdev '{"driver":"file","filename":"/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd","node-name":"libvirt-pflash0-storage","auto-read-only":true,"discard":"unmap"}' \
-blockdev '{"node-name":"libvirt-pflash0-format","read-only":true,"driver":"raw","file":"libvirt-pflash0-storage"}' \
-blockdev '{"driver":"file","filename":"/etc/libvirt/qemu/nvram/6bf37a5a-94f8-42bc-9a3d-62049fe4330b_VARS-pure-efi.fd","node-name":"libvirt-pflash1-storage","auto-read-only":true,"discard":"unmap"}' \
-blockdev '{"node-name":"libvirt-pflash1-format","read-only":false,"driver":"raw","file":"libvirt-pflash1-storage"}' \
-machine pc-q35-7.2,usb=off,dump-guest-core=off,mem-merge=off,memory-backend=pc.ram,pflash0=libvirt-pflash0-format,pflash1=libvirt-pflash1-format \
-accel kvm \
-cpu host,migratable=on,host-cache-info=on,l3-cache=off \
-m 8192 \
-object '{"qom-type":"memory-backend-ram","id":"pc.ram","size":8589934592}' \
-overcommit mem-lock=off \
-smp 8,sockets=1,dies=1,cores=4,threads=2 \
-uuid 6bf37a5a-94f8-42bc-9a3d-62049fe4330b \
-no-user-config \
-nodefaults \
-chardev socket,id=charmonitor,fd=35,server=on,wait=off \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc,driftfix=slew \
-global kvm-pit.lost_tick_policy=delay \
-no-hpet \
-no-shutdown \
-boot strict=on \
-device '{"driver":"pcie-root-port","port":8,"chassis":1,"id":"pci.1","bus":"pcie.0","multifunction":true,"addr":"0x1"}' \
-device '{"driver":"pcie-root-port","port":9,"chassis":2,"id":"pci.2","bus":"pcie.0","addr":"0x1.0x1"}' \
-device '{"driver":"pcie-root-port","port":17,"chassis":3,"id":"pci.3","bus":"pcie.0","addr":"0x2.0x1"}' \
-device '{"driver":"pcie-root-port","port":18,"chassis":4,"id":"pci.4","bus":"pcie.0","addr":"0x2.0x2"}' \
-device '{"driver":"pcie-root-port","port":19,"chassis":5,"id":"pci.5","bus":"pcie.0","addr":"0x2.0x3"}' \
-device '{"driver":"pcie-root-port","port":20,"chassis":6,"id":"pci.6","bus":"pcie.0","addr":"0x2.0x4"}' \
-device '{"driver":"pcie-root-port","port":10,"chassis":7,"id":"pci.7","bus":"pcie.0","addr":"0x1.0x2"}' \
-device '{"driver":"pcie-pci-bridge","id":"pci.8","bus":"pci.1","addr":"0x0"}' \
-device '{"driver":"ich9-usb-ehci1","id":"usb","bus":"pcie.0","addr":"0x7.0x7"}' \
-device '{"driver":"ich9-usb-uhci1","masterbus":"usb.0","firstport":0,"bus":"pcie.0","multifunction":true,"addr":"0x7"}' \
-device '{"driver":"ich9-usb-uhci2","masterbus":"usb.0","firstport":2,"bus":"pcie.0","addr":"0x7.0x1"}' \
-device '{"driver":"ich9-usb-uhci3","masterbus":"usb.0","firstport":4,"bus":"pcie.0","addr":"0x7.0x2"}' \
-device '{"driver":"virtio-serial-pci","id":"virtio-serial0","bus":"pci.3","addr":"0x0"}' \
-blockdev '{"driver":"file","filename":"/mnt/user/domains/Sonoma/Sonoma-opencore.img","node-name":"libvirt-3-storage","cache":{"direct":false,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \
-blockdev '{"node-name":"libvirt-3-format","read-only":false,"cache":{"direct":false,"no-flush":false},"driver":"raw","file":"libvirt-3-storage"}' \
-device '{"driver":"ide-hd","bus":"ide.2","drive":"libvirt-3-format","id":"sata0-0-2","bootindex":1,"write-cache":"on","serial":"vdisk1"}' \
-blockdev '{"driver":"file","filename":"/mnt/user/isos/Sonoma-install.img","node-name":"libvirt-2-storage","cache":{"direct":false,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \
-blockdev '{"node-name":"libvirt-2-format","read-only":false,"cache":{"direct":false,"no-flush":false},"driver":"raw","file":"libvirt-2-storage"}' \
-device '{"driver":"ide-hd","bus":"ide.3","drive":"libvirt-2-format","id":"sata0-0-3","write-cache":"on","serial":"vdisk2"}' \
-blockdev '{"driver":"file","filename":"/mnt/user/domains/Sonoma/macos_disk.img","node-name":"libvirt-1-storage","cache":{"direct":false,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \
-blockdev '{"node-name":"libvirt-1-format","read-only":false,"cache":{"direct":false,"no-flush":false},"driver":"raw","file":"libvirt-1-storage"}' \
-device '{"driver":"ide-hd","bus":"ide.4","drive":"libvirt-1-format","id":"sata0-0-4","write-cache":"on","serial":"vdisk3"}' \
-netdev tap,fd=36,id=hostnet0 \
-device '{"driver":"virtio-net","netdev":"hostnet0","id":"net0","mac":"ac:87:a3:5b:17:2f","bus":"pcie.0","addr":"0x3"}' \
-chardev pty,id=charserial0 \
-device '{"driver":"isa-serial","chardev":"charserial0","id":"serial0","index":0}' \
-chardev socket,id=charchannel0,fd=34,server=on,wait=off \
-device '{"driver":"virtserialport","bus":"virtio-serial0.0","nr":1,"chardev":"charchannel0","id":"channel0","name":"org.qemu.guest_agent.0"}' \
-device '{"driver":"usb-tablet","id":"input0","bus":"usb.0","port":"1"}' \
-audiodev '{"id":"audio1","driver":"none"}' \
-vnc 0.0.0.0:0,websocket=5700,audiodev=audio1 \
-k en-us \
-device '{"driver":"qxl-vga","id":"video0","max_outputs":1,"ram_size":67108864,"vram_size":67108864,"vram64_size_mb":0,"vgamem_mb":16,"bus":"pci.8","addr":"0x1"}' \
-device '{"driver":"virtio-balloon-pci","id":"balloon0","bus":"pci.5","addr":"0x0"}' \
-device '************************' \
-smbios type=2 \
-usb \
-device usb-tablet \
-device usb-kbd \
-cpu Skylake-Server,vendor=GenuineIntel,+hypervisor,+invtsc,kvm=on,+fma,+avx,+avx2,+aes,+ssse3,+sse4_2,+popcnt,+sse4a,+bmi1,+bmi2 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
-msg timestamp=on
char device redirected to /dev/pts/1 (label charserial0)
2024-09-23T07:26:14.839965Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.hle [bit 4]
2024-09-23T07:26:14.839990Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.rtm [bit 11]
2024-09-23T07:26:14.839993Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512f [bit 16]
2024-09-23T07:26:14.839996Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512dq [bit 17]
2024-09-23T07:26:14.839998Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512cd [bit 28]
2024-09-23T07:26:14.840001Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512bw [bit 30]
2024-09-23T07:26:14.840004Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512vl [bit 31]
2024-09-23T07:26:14.840007Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.80000001H:ECX.sse4a [bit 6]
2024-09-23T07:26:14.840010Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 5]
2024-09-23T07:26:14.840013Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 6]
2024-09-23T07:26:14.840015Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 7]
2024-09-23T07:26:14.840843Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.hle [bit 4]
2024-09-23T07:26:14.840849Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.rtm [bit 11]
2024-09-23T07:26:14.840852Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512f [bit 16]
2024-09-23T07:26:14.840855Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512dq [bit 17]
2024-09-23T07:26:14.840857Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512cd [bit 28]
2024-09-23T07:26:14.840860Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512bw [bit 30]
2024-09-23T07:26:14.840863Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512vl [bit 31]
2024-09-23T07:26:14.840866Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.80000001H:ECX.sse4a [bit 6]
2024-09-23T07:26:14.840869Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 5]
2024-09-23T07:26:14.840873Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 6]
2024-09-23T07:26:14.840876Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 7]
2024-09-23T07:26:14.841579Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.hle [bit 4]
2024-09-23T07:26:14.841584Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.rtm [bit 11]
2024-09-23T07:26:14.841587Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512f [bit 16]
2024-09-23T07:26:14.841590Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512dq [bit 17]
2024-09-23T07:26:14.841592Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512cd [bit 28]
2024-09-23T07:26:14.841594Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512bw [bit 30]
2024-09-23T07:26:14.841598Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512vl [bit 31]
2024-09-23T07:26:14.841603Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.80000001H:ECX.sse4a [bit 6]
2024-09-23T07:26:14.841609Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 5]
2024-09-23T07:26:14.841613Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 6]
2024-09-23T07:26:14.841617Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 7]
2024-09-23T07:26:14.842292Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.hle [bit 4]
2024-09-23T07:26:14.842296Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.rtm [bit 11]
2024-09-23T07:26:14.842299Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512f [bit 16]
2024-09-23T07:26:14.842302Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512dq [bit 17]
2024-09-23T07:26:14.842304Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512cd [bit 28]
2024-09-23T07:26:14.842306Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512bw [bit 30]
2024-09-23T07:26:14.842309Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512vl [bit 31]
2024-09-23T07:26:14.842313Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.80000001H:ECX.sse4a [bit 6]
2024-09-23T07:26:14.842319Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 5]
2024-09-23T07:26:14.842324Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 6]
2024-09-23T07:26:14.842328Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 7]
2024-09-23T07:26:14.843004Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.hle [bit 4]
2024-09-23T07:26:14.843008Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.rtm [bit 11]
2024-09-23T07:26:14.843011Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512f [bit 16]
2024-09-23T07:26:14.843013Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512dq [bit 17]
2024-09-23T07:26:14.843016Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512cd [bit 28]
2024-09-23T07:26:14.843018Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512bw [bit 30]
2024-09-23T07:26:14.843021Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512vl [bit 31]
2024-09-23T07:26:14.843025Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.80000001H:ECX.sse4a [bit 6]
2024-09-23T07:26:14.843031Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 5]
2024-09-23T07:26:14.843035Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 6]
2024-09-23T07:26:14.843039Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 7]
2024-09-23T07:26:14.843590Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.hle [bit 4]
2024-09-23T07:26:14.843594Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.rtm [bit 11]
2024-09-23T07:26:14.843597Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512f [bit 16]
2024-09-23T07:26:14.843599Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512dq [bit 17]
2024-09-23T07:26:14.843602Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512cd [bit 28]
2024-09-23T07:26:14.843605Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512bw [bit 30]
2024-09-23T07:26:14.843609Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512vl [bit 31]
2024-09-23T07:26:14.843614Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.80000001H:ECX.sse4a [bit 6]
2024-09-23T07:26:14.843619Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 5]
2024-09-23T07:26:14.843623Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 6]
2024-09-23T07:26:14.843627Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 7]
2024-09-23T07:26:14.844477Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.hle [bit 4]
2024-09-23T07:26:14.844481Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.rtm [bit 11]
2024-09-23T07:26:14.844483Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512f [bit 16]
2024-09-23T07:26:14.844486Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512dq [bit 17]
2024-09-23T07:26:14.844488Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512cd [bit 28]
2024-09-23T07:26:14.844491Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512bw [bit 30]
2024-09-23T07:26:14.844493Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512vl [bit 31]
2024-09-23T07:26:14.844497Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.80000001H:ECX.sse4a [bit 6]
2024-09-23T07:26:14.844502Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 5]
2024-09-23T07:26:14.844507Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 6]
2024-09-23T07:26:14.844511Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 7]
2024-09-23T07:26:14.845182Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.hle [bit 4]
2024-09-23T07:26:14.845186Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.rtm [bit 11]
2024-09-23T07:26:14.845189Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512f [bit 16]
2024-09-23T07:26:14.845191Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512dq [bit 17]
2024-09-23T07:26:14.845194Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512cd [bit 28]
2024-09-23T07:26:14.845197Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512bw [bit 30]
2024-09-23T07:26:14.845201Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.07H:EBX.avx512vl [bit 31]
2024-09-23T07:26:14.845206Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.80000001H:ECX.sse4a [bit 6]
2024-09-23T07:26:14.845212Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 5]
2024-09-23T07:26:14.845216Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 6]
2024-09-23T07:26:14.845220Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.0DH:EAX [bit 7]
qxl_send_events: spice-server bug: guest stopped, ignoring

 

Edited September 23 by Moniker Lewinski

[SpaceInvaderOne]

When you see  "Guest has not initialised the display yet". This is due to the nvram the vm is using. This can happen with any VM windows, Mac, linux.

Easiest fix. Just delete the vm (but dont select select disks). Run macinbox again. It will see the disks already there and will not need to download again. It will recreate the nvram and xml template. 
then run the VM and you should be good

 

[SpaceInvaderOne]

NEW MACINBOX AT LAST !!

Now I know many people have been asking for updates to this container for a long time.  So firstly sorry for the wait, but hopefully its worth it.
I decided too fully rewrite it and add new features. Now supports all macOS from High Sierra to Sonoma. 
Macinabox is now self-contained and no longer requires any helper scripts being able to fix xml itself.  
It dynamically build the XML based off not only the choices made in the container template but also by checking the host for which is latest qemu etc and building accordingly.

Also rerunning the container fixes XML problems, replacing missing custom xml, making sure the NIC is on the correct bus so macOS see it and can use it. And if you have an odd core count  macinabox will see this and remove the topology line to ensure the VM still boots

I have made the container so it will be much easier in future for me to update so expect more regular updates going forward.
Any suggests please let me know and open a request on GitHub    https://github.com/SpaceinvaderOne/Macinabox


Here is a video showing its use.
 

Basic Usage.
 

• Set notifications to Detailed.

• Configure Docker update notification to any option other than Never (e.g., Once per Day).

 

Installation Steps

 

1. Compliance: Ensure you are compliant with the Apple EULA for macOS virtual machines. Select whether you are compliant or not.

2. Select OS: In the template, choose the macOS version you wish to install.

3. VM Name: By default, Macinabox uses the OS name for the VM. If you prefer a different name, enter it in the Custom VM Name field (default is blank).

4. VDisk Type: Choose the vdisk type: Raw or QCOW2. The default option is Raw.

5. VDisk Size: Specify the size for the macOS vdisk in gigabytes. The default size is 100 GB.

6. Default Variables: You can leave all other settings as default. If needed, you can change the default locations for your domains, ISOs, or appdata shares.

 

Running the Container

 

• Launch the container. It will download the recovery media from Apple servers, name it, and place it in your ISO share.

• The container will create your vdisk and an OpenCore image for your VM, which will be placed in your domain share within a folder named after your VM.

• The XML for the VM will be dynamically generated based on your settings, and the container will perform checks on your server:

• It will check the version of QEMU installed and calculate the highest compatible version of Q35.

• It will set the default VM network source in the XML.

• It will add the appropriate custom QEMU command line arguments to the XML.

 

Notifications

 

During the container’s operation, you will receive notifications:

 

• When the installation media has been successfully downloaded.

• When the VM has been defined and is available on the VMs tab of your server.

• Or if any errors occur during the process.

 

Additional VM Configuration

 

Once the VM is installed, you may want to adjust it to your preferences:

 

1. On the Unraid vm tab. Click the vm and click edit. Now modify the CPU core count and RAM amount as needed.

 

Fixing broken XML Configuration

 

When making changes to the VM in the Unraid VM manager, the XML will be changed making the VM XML inorrect for macOS, which requires specific configurations. To fix this:

 

• Run Macinabox again. It will check if a macOS VM with the specified name already exists. If it does, it will fix the XML instead of attempting to install another VM. (This step is necessary for both Unraid 6 and 7.)

• If you make any changes to the VM in the Unraid VM manager, be sure to run the container again to update the XML.

 

Starting the VM

 

1. Start the VM and open a VNC window to proceed with the installation.

2. Boot into the OpenCore boot loader and select the bootable image labelled macOS Base System. Press Enter to continue.

 

Installing macOS

 

1. Once booted into recovery media, open Disk Utility to format your vdisk.

2. After formatting, close Disk Utility and select Reinstall macOS. Follow the wizard to complete the installation. The installation process may cause the VM to reboot approximately four times.
 

Hope you guys like this new macinabox

[shpitz461]

2 hours ago, SpaceInvaderOne said:

When you see  "Guest has not initialised the display yet". This is due to the nvram the vm is using. This can happen with any VM windows, Mac, linux.

Easiest fix. Just delete the vm (but dont select select disks). Run macinbox again. It will see the disks already there and will not need to download again. It will recreate the nvram and xml template. 
then run the VM and you should be good

 

Hi Ed,

I'm having the same issue, tried the fix but still the same.

 

I'm running on AMD Epyc.

 

It turns out I had to remove the nvram file manually (located in /var/lib/libvirt/qemu/nvram).

 

Also, if I make any changes to the cpu allocation, it won't boot for the 1st time.

 

So i kept the cpu assigned to 0 and 2 from the original template, and set ram to 16GB in the xml.

 

Now i'm doing the initial boot and install, I'll try to change cpu allocations after it's up and running (if that happens...)

 

Thanks!

[planetwilson]

How long are people finding it takes to install? as mine has been going for a good 2 hours now with no updates in the installer log since. There are about 12000 of those package authoring error lines as well.

Selected Sonoma and a 500G qcow2 disk which I formatted with APFS.

 

Edited September 23 by planetwilson

[guniv]

Working on setting this up now and seeing how it goes but I can already say I really greatly appreciate how much simpler you have made this. 

 

Just want to check: in previous versions we had to deal with using OpenCore Configurator and setting PlatformInfo, is that necessary still in this updated version if we want to log in with an Apple ID and have things working?

 

Very curious to see if you get an Intel iGPU passed through in the future, too.

[CIA]

Noticed no messages while using an agent... Here's the warning I get from the log.

 

Warning: exec(): Unable to fork [TIMESTAMP='1727113261' EVENT='Macinabox Container' SUBJECT='Ventura' DESCRIPTION='VM setup successfully completed. The VM is now ready to be run.' IMPORTANCE='normal' CONTENT='' LINK='' bash /boot/config/plugins/dynamix/notifications/agents/Gotify.sh] in /usr/local/emhttp/webGui/scripts/notify on line 219

 

[mv_dev]

Hi everyone, I tried the new macinabox but the vm seems to be locked, in the vm log there are those strange error on the CPU "host doesn't support requested feature: CPUID.07H:EBX.". I'm running a 5950x with a Rx6750xt, there are some incompatibility problems with amd?

[Espressomatic]

So streamlined, great work!

 

6 hours ago, SpaceInvaderOne said:

 

2. After formatting, close Disk Utility and select Reinstall macOS. Follow the wizard to complete the installation. The installation process may cause the VM to reboot approximately four times.

 

No need for steps 3 and 4 with this release?

 

3. Such as setting the serial number on the EFI partition, verifying it's unique, etc.

4. Setting the default boot volume and turning off the bootloader.

 

 

[bmartino1]

6 hours ago, SpaceInvaderOne said:

NEW MACINBOX AT LAST !!

Now I know many people have been asking for updates to this container for a long time.  So firstly sorry for the wait, but hopefully its worth it.
I decided too fully rewrite it and add new features. Now supports all macOS from High Sierra to Sonoma. 
Macinabox is now self-contained and no longer requires any helper scripts being able to fix xml itself.  
It dynamically build the XML based off not only the choices made in the container template but also by checking the host for which is latest qemu etc and building accordingly.

Also rerunning the container fixes XML problems, replacing missing custom xml, making sure the NIC is on the correct bus so macOS see it and can use it. And if you have an odd core count  macinabox will see this and remove the topology line to ensure the VM still boots

I have made the container so it will be much easier in future for me to update so expect more regular updates going forward.
Any suggests please let me know and open a request on GitHub    https://github.com/SpaceinvaderOne/Macinabox


Here is a video showing its use.
 

Basic Usage.
 

• Set notifications to Detailed.

• Configure Docker update notification to any option other than Never (e.g., Once per Day).

 

Installation Steps

 

1. Compliance: Ensure you are compliant with the Apple EULA for macOS virtual machines. Select whether you are compliant or not.

2. Select OS: In the template, choose the macOS version you wish to install.

3. VM Name: By default, Macinabox uses the OS name for the VM. If you prefer a different name, enter it in the Custom VM Name field (default is blank).

4. VDisk Type: Choose the vdisk type: Raw or QCOW2. The default option is Raw.

5. VDisk Size: Specify the size for the macOS vdisk in gigabytes. The default size is 100 GB.

6. Default Variables: You can leave all other settings as default. If needed, you can change the default locations for your domains, ISOs, or appdata shares.

 

Running the Container

 

• Launch the container. It will download the recovery media from Apple servers, name it, and place it in your ISO share.

• The container will create your vdisk and an OpenCore image for your VM, which will be placed in your domain share within a folder named after your VM.

• The XML for the VM will be dynamically generated based on your settings, and the container will perform checks on your server:

• It will check the version of QEMU installed and calculate the highest compatible version of Q35.

• It will set the default VM network source in the XML.

• It will add the appropriate custom QEMU command line arguments to the XML.

 

Notifications

 

During the container’s operation, you will receive notifications:

 

• When the installation media has been successfully downloaded.

• When the VM has been defined and is available on the VMs tab of your server.

• Or if any errors occur during the process.

 

Additional VM Configuration

 

Once the VM is installed, you may want to adjust it to your preferences:

 

1. On the Unraid vm tab. Click the vm and click edit. Now modify the CPU core count and RAM amount as needed.

 

Fixing broken XML Configuration

 

When making changes to the VM in the Unraid VM manager, the XML will be changed making the VM XML inorrect for macOS, which requires specific configurations. To fix this:

 

• Run Macinabox again. It will check if a macOS VM with the specified name already exists. If it does, it will fix the XML instead of attempting to install another VM. (This step is necessary for both Unraid 6 and 7.)

• If you make any changes to the VM in the Unraid VM manager, be sure to run the container again to update the XML.

 

Starting the VM

 

1. Start the VM and open a VNC window to proceed with the installation.

2. Boot into the OpenCore boot loader and select the bootable image labelled macOS Base System. Press Enter to continue.

 

Installing macOS

 

1. Once booted into recovery media, open Disk Utility to format your vdisk.

2. After formatting, close Disk Utility and select Reinstall macOS. Follow the wizard to complete the installation. The installation process may cause the VM to reboot approximately four times.
 

Hope you guys like this new macinabox

will this work with beta 7?

[HomerJ]

Thank you so very much for putting all the extra time and effort into this!! I will give installing this a go very soon!!

Edited September 23 by HomerJ
Fixed typo

[SimonF]

18 minutes ago, bmartino1 said:

will this work with beta 7?

Yes

[bmartino1]

awesome, looks like i will need to add this to retest

sadly as I thought with issues from last time... opencore problems...

Lets go Imac...

Docker log

VM called AppleVentura does not exist. Continuing to install it.
deleting existing opencore
mkdir: created directory '/config/custom_opencore'
mkdir: created directory '/config/stock_opencore'
No custom OpenCore .iso.gz file found, using stock version
Extracting stock OpenCore from /config/bootloader/OpenCore-v21.iso.gz
Moving stock OpenCore to the VM share
Failed to move stock OpenCore image

** Press ANY KEY to close this window ** 

[bmartino1]

Thank you SpaceInvader!

Working now. had to adjust ISO file location, and fix a few things in cleanup...

https://en.wikipedia.org/wiki/MacOS_version_history

[avinyc]

9 hours ago, SpaceInvaderOne said:

When you see  "Guest has not initialised the display yet". This is due to the nvram the vm is using. This can happen with any VM windows, Mac, linux.

Easiest fix. Just delete the vm (but dont select select disks). Run macinbox again. It will see the disks already there and will not need to download again. It will recreate the nvram and xml template. 
then run the VM and you should be good

 

I did this when I first had difficulty getting the install to run.  I'm on unRaid 6.12.10, the installation of Sonoma went fine, but I left the settings as default (4gb of ram, 2 cores).  After the install completed, I went to change the icon, ram and cores, and now I keep getting the "Guest has not initialized the display yet" even when I try to change it back to the default settings.  I re-ran the macinbox container (probably not a good idea) so if I have to redo from scratch no biggie.  I guess I want to know what I should do to avoid getting that error in VNC but still get everything to run.

 

Let me know if you need additional details, thanks @SpaceInvaderOne

[TheSurfer]

5 minutes ago, avinyc said:

I did this when I first had difficulty getting the install to run.  I'm on unRaid 6.12.10, the installation of Sonoma went fine, but I left the settings as default (4gb of ram, 2 cores).  After the install completed, I went to change the icon, ram and cores, and now I keep getting the "Guest has not initialized the display yet" even when I try to change it back to the default settings.  I re-ran the macinbox container (probably not a good idea) so if I have to redo from scratch no biggie.  I guess I want to know what I should do to avoid getting that error in VNC but still get everything to run.

 

Let me know if you need additional details, thanks @SpaceInvaderOne

I have the same version of unRaid and i encounter the same problem. I followed the tutorial and deleted de nvram files and it does not work. I tried many things  but if i change even the icon from the VM xml it wont boot anymore giving the  "Guest has not initialized the display yet" error.

[bmartino1]

wow over 34 pcie root dublicated bug
on unraid betat 7 be careful of duplicate root pcie devices when making edits and cahgnes. this bug was noted here.
 

 

[avinyc]

7 hours ago, shpitz461 said:

Hi Ed,

I'm having the same issue, tried the fix but still the same.

 

I'm running on AMD Epyc.

 

It turns out I had to remove the nvram file manually (located in /var/lib/libvirt/qemu/nvram).

 

Also, if I make any changes to the cpu allocation, it won't boot for the 1st time.

 

So i kept the cpu assigned to 0 and 2 from the original template, and set ram to 16GB in the xml.

 

Now i'm doing the initial boot and install, I'll try to change cpu allocations after it's up and running (if that happens...)

 

Thanks!

Don't change it if you want to be able to run it without some other fix.  I did this as well, let it install using default cores and ram.  Once you try to change it, you'll get the error again.  Any time you edit the VM settings, you have to rerun macinbox container and I think that's where this is going sideways for us.

 

I'm guessing this is happening to a bunch of users, so hopefully he can help us figure out a solution.  Waited this long for Sonoma, I'm happy to wait a little longer:)

[avinyc]

1 hour ago, TheSurfer said:

I have the same version of unRaid and i encounter the same problem. I followed the tutorial and deleted de nvram files and it does not work. I tried many things  but if i change even the icon from the VM xml it wont boot anymore giving the  "Guest has not initialized the display yet" error.

Yep, right now this is not letting us change any VM settings without ruining the install.  At this point, I'd just wait until a solution is posted.

[shpitz461]

8 hours ago, shpitz461 said:

Hi Ed,

I'm having the same issue, tried the fix but still the same.

 

I'm running on AMD Epyc.

 

It turns out I had to remove the nvram file manually (located in /var/lib/libvirt/qemu/nvram).

 

Also, if I make any changes to the cpu allocation, it won't boot for the 1st time.

 

So i kept the cpu assigned to 0 and 2 from the original template, and set ram to 16GB in the xml.

 

Now i'm doing the initial boot and install, I'll try to change cpu allocations after it's up and running (if that happens...)

 

Thanks!

Any changes I make to the xml in the cpu section breaks the image and it won't boot.

As soon as I restore the original xml with 2 vcpu (no hyperthreads) it works fine.

Working XML:

Quote

<?xml version='1.0' encoding='UTF-8'?>
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
  <name>Sonoma</name>
  <uuid>dd5ba1dc-223e-4174-9353-b7bb85ab346b</uuid>
  <metadata>
    <vmtemplate xmlns="unraid" icon="macinabox.png" os="osx" webui="" name="Linux"/>
  </metadata>
  <memory unit='KiB'>16777216</memory>
  <currentMemory unit='KiB'>16777216</currentMemory>
  <memoryBacking>
    <nosharepages/>
  </memoryBacking>
  <vcpu placement='static'>2</vcpu>
  <cputune>
    <vcpupin vcpu='0' cpuset='0'/>
    <vcpupin vcpu='1' cpuset='2'/>
  </cputune>
  <os>
    <type arch='x86_64' machine='pc-q35-7.2'>hvm</type>
    <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader>
    <nvram>/var/lib/libvirt/qemu/nvram/dd5ba1dc-223e-4174-9353-b7bb85ab346b_VARS-pure-efi.fd</nvram>
  </os>
  <features>
    <acpi/>
    <apic/>
  </features>
  <cpu mode='host-passthrough' check='none' migratable='on'>
    <topology sockets='1' dies='1' cores='1' threads='2'/>
    <cache mode='passthrough'/>
  </cpu>
  <clock offset='utc'>
    <timer name='rtc' tickpolicy='catchup'/>
    <timer name='pit' tickpolicy='delay'/>
    <timer name='hpet' present='no'/>
  </clock>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>restart</on_crash>
  <devices>
    <emulator>/usr/local/sbin/qemu</emulator>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw' cache='writeback'/>
      <source file='/mnt/user/domains/Sonoma/Sonoma-opencore.img'/>
      <target dev='hdc' bus='sata'/>
      <serial>vdisk1</serial>
      <boot order='1'/>
      <address type='drive' controller='0' bus='0' target='0' unit='2'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw' cache='writeback'/>
      <source file='/mnt/user/isos/OS/MAC/Sonoma-install.img'/>
      <target dev='hdd' bus='sata'/>
      <serial>vdisk2</serial>
      <address type='drive' controller='0' bus='0' target='0' unit='3'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='qcow2' cache='writeback'/>
      <source file='/mnt/user/domains/Sonoma/macos_disk.img'/>
      <target dev='hde' bus='sata'/>
      <serial>vdisk3</serial>
      <address type='drive' controller='0' bus='0' target='0' unit='4'/>
    </disk>
    <controller type='usb' index='0' model='ich9-ehci1'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci1'>
      <master startport='0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci2'>
      <master startport='2'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1' multifunction='on'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci3'>
      <master startport='4'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/>
    </controller>
    <controller type='pci' index='0' model='pcie-root'/>
    <controller type='pci' index='1' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='1' port='0x8'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0' multifunction='on'/>
    </controller>
    <controller type='pci' index='2' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='2' port='0x9'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
    </controller>
    <controller type='pci' index='3' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='3' port='0x11'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/>
    </controller>
    <controller type='pci' index='4' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='4' port='0x12'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/>
    </controller>
    <controller type='pci' index='5' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='5' port='0x13'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/>
    </controller>
    <controller type='pci' index='6' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='6' port='0x14'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x4'/>
    </controller>
    <controller type='virtio-serial' index='0'>
      <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
    </controller>
    <controller type='sata' index='0'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/>
    </controller>
    <interface type='bridge'>
      <mac address='ac:87:a3:24:8f:79'/>
      <source bridge='br0'/>
      <model type='virtio-net'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
    </interface>
    <serial type='pty'>
      <target type='isa-serial' port='0'>
        <model name='isa-serial'/>
      </target>
    </serial>
    <console type='pty'>
      <target type='serial' port='0'/>
    </console>
    <channel type='unix'>
      <target type='virtio' name='org.qemu.guest_agent.0'/>
      <address type='virtio-serial' controller='0' bus='0' port='1'/>
    </channel>
    <input type='tablet' bus='usb'>
      <address type='usb' bus='0' port='1'/>
    </input>
    <input type='mouse' bus='ps2'/>
    <input type='keyboard' bus='ps2'/>
    <graphics type='vnc' port='-1' autoport='yes' websocket='-1' listen='0.0.0.0' keymap='en-us'>
      <listen type='address' address='0.0.0.0'/>
    </graphics>
    <audio id='1' type='none'/>
    <video>
      <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
    </video>
    <memballoon model='none'/>
  </devices>
  <qemu:commandline>
    <qemu:arg value='-device'/>
    <qemu:arg value='************************'/>
    <qemu:arg value='-smbios'/>
    <qemu:arg value='type=2'/>
    <qemu:arg value='-usb'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='usb-tablet'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='usb-kbd'/>
    <qemu:arg value='-cpu'/>
    <qemu:arg value='Skylake-Server,vendor=GenuineIntel,+hypervisor,+invtsc,kvm=on,+fma,+avx,+avx2,+aes,+ssse3,+sse4_2,+popcnt,+sse4a,+bmi1,+bmi2'/>
  </qemu:commandline>
</domain>

Broken XML:

Quote

<?xml version='1.0' encoding='UTF-8'?>
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
  <name>Sonoma</name>
  <uuid>dd5ba1dc-223e-4174-9353-b7bb85ab346b</uuid>
  <metadata>
    <vmtemplate xmlns="unraid" icon="macinabox.png" os="osx" webui="" name="Linux"/>
  </metadata>
  <memory unit='KiB'>16777216</memory>
  <currentMemory unit='KiB'>16777216</currentMemory>
  <memoryBacking>
    <nosharepages/>
  </memoryBacking>
  <vcpu placement='static'>8</vcpu>
  <cputune>
    <vcpupin vcpu='0' cpuset='32'/>
    <vcpupin vcpu='1' cpuset='33'/>
    <vcpupin vcpu='2' cpuset='34'/>
    <vcpupin vcpu='3' cpuset='35'/>
    <vcpupin vcpu='4' cpuset='36'/>
    <vcpupin vcpu='5' cpuset='37'/>
    <vcpupin vcpu='6' cpuset='38'/>
    <vcpupin vcpu='7' cpuset='39'/>
  </cputune>
  <os>
    <type arch='x86_64' machine='pc-q35-7.2'>hvm</type>
    <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader>
    <nvram>/etc/libvirt/qemu/nvram/dd5ba1dc-223e-4174-9353-b7bb85ab346b_VARS-pure-efi.fd</nvram>
  </os>
  <features>
    <acpi/>
    <apic/>
  </features>
  <cpu mode='host-passthrough' check='none' migratable='on'>
    <topology sockets='1' dies='1' cores='4' threads='2'/>
    <cache mode='passthrough'/>
  </cpu>
  <clock offset='utc'>
    <timer name='rtc' tickpolicy='catchup'/>
    <timer name='pit' tickpolicy='delay'/>
    <timer name='hpet' present='no'/>
  </clock>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>restart</on_crash>
  <devices>
    <emulator>/usr/local/sbin/qemu</emulator>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw' cache='writeback'/>
      <source file='/mnt/user/domains/Sonoma/Sonoma-opencore.img'/>
      <target dev='hdc' bus='sata'/>
      <serial>vdisk1</serial>
      <boot order='1'/>
      <address type='drive' controller='0' bus='0' target='0' unit='2'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw' cache='writeback'/>
      <source file='/mnt/user/isos/OS/MAC/Sonoma-install.img'/>
      <target dev='hdd' bus='sata'/>
      <serial>vdisk2</serial>
      <address type='drive' controller='0' bus='0' target='0' unit='3'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='qcow2' cache='writeback'/>
      <source file='/mnt/user/domains/Sonoma/macos_disk.img'/>
      <target dev='hde' bus='sata'/>
      <serial>vdisk3</serial>
      <address type='drive' controller='0' bus='0' target='0' unit='4'/>
    </disk>
    <controller type='pci' index='0' model='pcie-root'/>
    <controller type='pci' index='1' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='1' port='0x8'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0' multifunction='on'/>
    </controller>
    <controller type='pci' index='2' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='2' port='0x9'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
    </controller>
    <controller type='pci' index='3' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='3' port='0x11'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/>
    </controller>
    <controller type='pci' index='4' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='4' port='0x12'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/>
    </controller>
    <controller type='pci' index='5' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='5' port='0x13'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/>
    </controller>
    <controller type='pci' index='6' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='6' port='0x14'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x4'/>
    </controller>
    <controller type='pci' index='7' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='7' port='0xa'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
    </controller>
    <controller type='pci' index='8' model='pcie-to-pci-bridge'>
      <model name='pcie-pci-bridge'/>
      <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
    </controller>
    <controller type='virtio-serial' index='0'>
      <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
    </controller>
    <controller type='sata' index='0'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/>
    </controller>
    <controller type='usb' index='0' model='ich9-ehci1'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci1'>
      <master startport='0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci2'>
      <master startport='2'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci3'>
      <master startport='4'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/>
    </controller>
    <interface type='bridge'>
      <mac address='ac:87:a3:24:8f:79'/>
      <source bridge='br0'/>
      <model type='virtio-net'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
    </interface>
    <serial type='pty'>
      <target type='isa-serial' port='0'>
        <model name='isa-serial'/>
      </target>
    </serial>
    <console type='pty'>
      <target type='serial' port='0'/>
    </console>
    <channel type='unix'>
      <target type='virtio' name='org.qemu.guest_agent.0'/>
      <address type='virtio-serial' controller='0' bus='0' port='1'/>
    </channel>
    <input type='tablet' bus='usb'>
      <address type='usb' bus='0' port='1'/>
    </input>
    <input type='mouse' bus='ps2'/>
    <input type='keyboard' bus='ps2'/>
    <graphics type='vnc' port='-1' autoport='yes' websocket='-1' listen='0.0.0.0' keymap='en-us'>
      <listen type='address' address='0.0.0.0'/>
    </graphics>
    <audio id='1' type='none'/>
    <video>
      <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/>
      <address type='pci' domain='0x0000' bus='0x08' slot='0x01' function='0x0'/>
    </video>
    <memballoon model='none'/>
  </devices>
  <qemu:commandline>
    <qemu:arg value='-device'/>
    <qemu:arg value='************************'/>
    <qemu:arg value='-smbios'/>
    <qemu:arg value='type=2'/>
    <qemu:arg value='-usb'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='usb-tablet'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='usb-kbd'/>
    <qemu:arg value='-cpu'/>
    <qemu:arg value='Skylake-Server,vendor=GenuineIntel,+hypervisor,+invtsc,kvm=on,+fma,+avx,+avx2,+aes,+ssse3,+sse4_2,+popcnt,+sse4a,+bmi1,+bmi2'/>
  </qemu:commandline>
</domain>

 

[Moniker Lewinski]

After updating macinthebox my VM works absolutely perfectly.

The one thing I am struggling with is resizing the partition so I can directly grab my Time Machine backups from my Macbook.

I don't have any experience working with VM's before.... however,

• I can see how to change the VM disk size in UNRAID. (/mnt/user/domains/Sonoma/macos_disk.img)
• I get into the recovery partition inside Mac OS and Disk Utility can successfully make the partition smaller, but not bigger
• I would actually just erase everything and re-do the VM but I can't seem to get rid of it. When I choose "remove VM & disks" it either doesn't respond. Or when I run macinthebox again it simply replaces the exact same installation with data inside fully intact (doesn't erase anything).

Thank you,

 

 

 

Edited September 24 by Moniker Lewinski

[bmartino1]

Posting for data prosperity.

for some reason opencore and nvram doesn't play nice in beta7 of my unraid along with some weird so I decided to try on a fresh copy still problems...

Problem one, on my hardware setup:
I'm using network setup bridging off, bonding on. macinthebox pickups the network for vhost0...

After the docker ran a VM was created, it would error at launch not liking vhost0
*No EDITS were made a download and try to run...

This is what I landed on for some side checks and fixes. Hopefully the community can use this on their own troubleshooting steps if they have issues/problems...

Using qcow2 format and mac OS Journal (extended) for filesystem...


But implements the networking were weird on the vm... after the docker finished I got an execution error networking etc vhost0 cant use... (didn't catch / save the error  my bad...)




My fix. let the docker do its thing then later edits in xml... edit out the network and replace xml code with :

    <interface type='direct' trustGuestRxFilters='yes'>
      <mac address='52:54:00:89:1f:91'/>
      <source dev='vhost0' mode='bridge'/>
      <model type='virtio'/>
      <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
    </interface>

*I was able to get a working network by using this on unraid 7 beta 2. This alowed the vm to start and i was at the opencore boot page...

However, for some reason, I also had a hard time getting the CPU arg working...

This is what I used instead:
*I had to drop my q35 version to get it to run
  <os>
    <type arch='x86_64' machine='pc-q35-4.2'>hvm</type>
 

  <qemu:commandline>
    <qemu:arg value='-usb'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='usb-kbd,bus=usb-bus.0'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='isa-applesmc,osk=...'/>
    <qemu:arg value='-smbios'/>
    <qemu:arg value='type=2'/>
    <qemu:arg value='-global'/>
    <qemu:arg value='nec-usb-xhci.msi=off'/>
    <qemu:arg value='-global'/>
    <qemu:arg value='ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off'/>
    <qemu:arg value='-cpu'/>
    <qemu:arg value='Haswell-noTSX,kvm=on,vmware-cpuid-freq=on,vendor=GenuineIntel,+kvm_pv_unhalt,+kvm_pv_eoi,+hypervisor,+invtsc,+pcid,+ssse3,+sse4.2,+popcnt,+avx,+avx2,+aes,+fma,+fma4,+bmi1,+bmi2,+xsave,+xsaveopt,+rdrand,check'/>
  </qemu:commandline>

*this is data from VMware/Boradcom qemu cpuid they have on file for virtualizing apple OS... (pulled from what was my wokring bigsur VM...)

With these 2 changes, I was finally able to get unraid to boot my vm:

 

ATM my dev testing on apple is over and i like to keep a VM for my real hardware for recovery purposes...
will need to test ventura / sonma next after Monterey is done. I had issues with getting a VM for apple running past bigsur... with this fresh install and docker update alot of problems have been fixed.

Big Thanks To SpaceInvader!

Edited September 25 by bmartino1
using older apple Hardware to run newer OS

[bmartino1]

while it worked for montery it didn't for sonoma...
notes to self for latter playing to get sonoma working.

under vm settings i had also set default network off of virbr0 to vhost... will try again with more default settings...

Other helpful sites and data...
https://i12bretro.github.io/tutorials/0566.html

https://github.com/kholia/OSX-KVM

https://github.com/kholia/OSX-KVM/blob/master/UNRAID.md

seems to be the nic issues again per the docker trying to fix...
Setting > VM > view libvirt LOG:
when it was vhot0 alost of sonoma vmnet2 doen't exit causing problems...

now on virbr0 for testing.. default on unraid beta 2
2024-09-24 03:48:03.880+0000: 14690: error : virNetSocketReadWire:1781 : End of file while reading data: Input/output error

so more testing for me... but finally got a os where I can test other pass though items in...



fixing vm setting to use virbr0 did fix default no change first run form docker. so definitely vm setting need to stay as close from factory default as possible...

Edited September 24 by bmartino1
added details

[lucifor1976]

Hello,

 

how to enable Hyper V for a Sonova Container?

is it possible or not?