Stable Releases
Bug reports for stable releases.
2506 reports in this category
-
There is a known issue with v6.8 where parity syncs can be slower than before, mostly but not limited to faster and/or very wide arrays. Although this isn't an urgent issue by any means this thread is meant to make it easier for LT to track the problem, also to have a better idea of how many users are affected and if there is a typical server configuration where the slowdown starts to be more noticeable. This issue results from changes made to the md driver and tunables t
- Annoyance
- 10592 views
-
Reproduce: Have a docker, with a variable, its a text that includes some pipe symbols and it should be passed 1-on-1 to the docker, e.g. username|password|/home/username The docker i was trying to use and requires this syntax is https://hub.docker.com/r/delfer/alpine-ftp-server Problems/bugs seen: The UI made the default value into a dropdown with 3 options. This was not desired. The UI forgot the value because it included the pipe symbol a
- Minor
- 552 views
-
Hi! since 6,9 we haven't been able to use our trendnet 10GBE card with unraid because the driver from Tehuti Networks tn40xx was not included because it didn't build. The company seems to have disappeared, but there is a third party driver here: https://github.com/acooks/tn40xx-driver Not sure how to install it or if you can use it in a future update.
- Minor
- 822 views
-
Running 6.9.2 and my full hardware info is in my signature. I am using an Intel X550-T2 NBASE-T network adaptor. When I first startup unRAID the System Information correctly reports 10000 Mbps, but after some time unRAID will report 1000 Mbps. My Brocade ICX6450 correctly reports a proper 10G connection and iperf3 (from nerd tools) confirms that unRAID is truly using the full 10G. It seems to just be a reporting error by unRAID and that the system is actually at 10000 Mbps. Thoug
- Minor
- 2613 views
-
Hello everyone, I use my Unraid install as my important data holder among other things, but since few days (3 days to a week), I'm not able to copy anything in it, each time I try to launch a copy, the transfer get stuck on starting for a couple of seconds, then get stuck for 10 to 20 seconds between each two files, then after a couple of files, it just stops, also, if I try to cancel the transfer, it get stuck on cancelling for around 20 seconds to a minute sometimes, before eventua
- Solved
- 4155 views
-
Running version 6.9.2. I have a share named "games". It was set Cache: Yes. While copying data to this share, the cache pool got entirely full. Once I realized this, I changed it to Cache: Prefer. I then started the Mover. I realized that might not move all of the data to the array, which is what I wanted, so I changed the setting to Cache: No. Upon making that change, I was told "Share games deleted." Proceeding beyond that returned me to the Shares tab, which now had no shares at all l
- Closed
- 550 views
-
When a container that has other containers networked through it gets removed by auto-update-plugin the networked containers get stuck in a loop of being created and destroyed until the container networking settings are edited to stop the loop. Buttons at the bottom of the docker screen were greyed out so I could not add the gluetun-vpn container back.
- Minor
- 1226 views
-
I recently updated from 6.8.3 to 6.9.2 - everything worked fine. But none of my virtual machines works when passing through any gpu to them. They just boot loop into windows recovery or just don't load up at all. I get the tianocore loading screen on my display just fine. But after that it either freezes or boot loops. I have tried many different things I could find in other threads but nothing seems to work for me. I have no idea what to do at this point. tower-diagnostics-20210412-1039.zip
- Annoyance
- 6971 views
-
Hi, i don't know how, and why, but if i open unraid ip in incognito mode, i already logged, no autorization needed, wtf?! demonstration: P.S, from any device of my network, i can open unraid without logging! tqxjBUmRaG.mp4 I use Version: 6.9.2
- Closed
- 701 views
-
Seems like this bug https://forums.unraid.net/topic/27320-cannot-do-non-correcting-parity-check-after-array-stopstart/ still exists in 6.9.2
- Urgent
- 981 views
-
I have a one disk pool that I am using for the DVR for my security cameras. I expect this disk to always be full as the security camera software is managing the use of the disk. So, I set the notifications for this pool to zero as specified by the popup help. Despite this, I am still receiving notifications that the disk is approaching full. Have I done something wrong or missed an additional setting, or is this a genuine bug? Please see attached screenshot and diagnostics (I know I have a pause
- Minor
- 2351 views
-
Just moved install to new motherboard and started seeing this error in the Docker settings page. Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(523) : eval()'d code on line 52 It doesn't appear to impact useability or function. Currently installed plugins: CA Backup / Restore Appdata Support Thread Andrew Zawadzki 2021.12.05 up-to-date Community Applications Support Thread Andrew Zawadzki 2
- Solved
- 911 views
-
I set to yearly. I am expecting this should executed in year but it executes now. Before this, I used monthly or even disable still randomly it executes itself. Scheduled parity check: yearly (latest) Day of the week: --- Day of the month: First day Time of the day: 2:30 Month of the year: December Write corrections to parity disk: Yes See the history: 2021-12-20, 15:33:45 16 hr, 41 min, 43 sec 133.1 MB/s OK 0 2021-10-23, 15:30:27 16 hr, 33 min, 20
- Closed
- 1268 views
-
Logged into my unraid system and the text looks.....compressed? Like each letter over laps the one before it, sort of. I've seen other people have this issue, did any one find a resolution?
- Minor
- 910 views
-
In /etc/samba/smb.conf the SMB Extras config file is included before the Shares config file. This causes issues when trying to specify additional smb options for these shares. # hook for user-defined samba config include = /boot/config/smb-extra.conf # auto-configured shares include = /etc/samba/smb-shares.conf should be changed to # auto-configured shares include = /etc/samba/smb-shares.conf # hook for user-defined samba config include = /bo
- Minor
- 991 views
-
I have been tracking a continuous call trace problem for many days and it seems the built in nvidia kernel/drivers is causing them. Any insight to alleviate this would be great. I am not sure if this is a "bug" or a "support issue" so wanted to start here and be moved if needed. System Info Unraid Version:6.9.2 && 6.10-rc1 Kernel:5.10.28-Unraid Compile Date:Wed Apr 7 08:23:18 PDT 2021 nVidia Info: Nvidia Driver Version:470.63.01 (latest stable
- Minor
- 1675 views
-
Good day, I have come across the issue that when running a Linux Based operating systems in the Unraid VM with CCTV software it does not release memory as it should. When testing with a baremetal install on the same hardware the issue does not occur. And the best part is, that i do not seem to be alone. Main testing: ShinobiCCTV in Ubuntu 20.04LTS ShinobiCCTV in CentOS 8 ShinobiCCTV in Docker (SpaceInvaderOne, with and without hardware acceleration)
- Solved
- Minor
- 805 views
-
When setting up a minecraft server through TQ's docker (highest download count under "minecraft" in CA), when the data path is set to /mnt/user/minecraft/ the minecraft server is unusably slow and crashes 60 seconds after a user tries to break a block (server tick timeout). Server works perfectly when this value is changed to /mnt/cache/minecraft/. Completely reproducible for me after remove/reinstall, and reboot. Expected behavior is that either path value should work. The share "mi
- Minor
- 1007 views
-
Hi all. I use a proxy and have switched off the use for local addresses. Nevertheless, the dashboard only works partially. If I switch off the proxy use, the dashboard works again. Do you have any tips? Best regards Karsten
- Minor
- 1124 views
-
The UnRaid > Share gui does not correct present the state of includes defined, when the share includes non-existing disks. Any change in the gui (such as description) will remove non-existing disks from the include-definition of the share. I shrunk my array to one disk from four disks. After that operation I could not write any disk via user-share mount (no space available error), but there was no information regarding this in the UnRaid > Share gui. I realised this was caused by
- Minor
- 544 views
-
Hello, I have a Time Machine share set up on my server to backup my MacBook Pro too but it's unbelievably slow. Any suggestions how to speed it up or figure out why it's slow? I'm using a 2017 13" MacBook Pro running Catalina 10.15.2. Connected via Ethernet as well. All suggestions very much welcome! Thanks, Neil Edit: As per @limetech instructions I have attached diagnostics: tardis-diagnostics-20200204-2055.zip
- Minor
- 14039 views
-
Hello all, I have encountered a bug with Unraid, where emhttpd has issues creating the nginx config file when using a ecdsa-with-SHA512 certificate (RSA certs do not seem to have this issue). This cert was self signed with a CA trusted on a few of my devices. After a bit of digging, I saw that running the nginx command gave the following error: nginx: [emerg] invalid number of arguments in "return" directive in /etc/nginx/conf.d/emhttp-servers.conf:39 At line 39,
- Minor
- 649 views
-
Hi all, I have a backup share, restricted to disk2 in my array (this is to prevent hourly backups of smaller things getting scattered throughout other disks, preventing spin down). I've set the backup share to include only disk2, and all other shares to exclude this disk. With a weekly VM backup user script, I am copying from /mnt/user/domains (cache only) to /mnt/user0/backup/vm When this script runs, data is copied to /mnt/disk1/backup/vm This beha
- Solved
- 1200 views
-
Hello, I currently have "UTC -05:00 Eastern Time (US & Canada)" Set in the date and time settings. This make the ident.cfg file on the flash drive show timeZone="America/New_York". I wanted to have timeZone="America/Montreal" instead since it's available. When I set that in the cfg file and restart my server, it showed "UTC -08:00 Pacific Time (US & Canada)", which is wrong. Thank you
- Annoyance
- 1287 views
-
I noticed my log starting to fill up after the upgrade and it had the following repeating over and over. idmap_hash_initialize: The idmap_hash module is deprecated and should not be used. Please migrate to a different plugin. This module will be removed in a future version of Samba Diagnostics attached below.. zerver2-diagnostics-20210304-1855.zip
- Annoyance
- 2368 views
