CHBMB Posted November 21, 2015 Share Posted November 21, 2015 Hi James and any others that are having trouble with the Triode Spotify Plugin within the docker container, I have been battling this issue for about a month now and finally spent the day trying to get to the root. If you change the network mode of the docker container to 'host' you will notice that the spotify plugin works great. This confirmed that it was definitely a networking issue. I realized that the whole plugin test was actually streaming from the remote player, it dawned on me that the player needs to stream from the LMS, duh. You can see from the Information tab of LMS that the internal IP is NOT the same as the unraid host. So, with docker bridge mode, it is NAT'ing into the container, and the ports you indicated as forwarding are indeed required, however, the IP that the spotify plugin is "announcing" to the client player is the internal IP which it cannot resolve. So that was the long answer. There is currently no way to configure the 'external IP' of the docker container to the player. The solution was to jump into the code and hard code the external IP. I found an example of this issue at http://forums.slimdevices.com/showthread.php?79706-Announce-Spotify-Premium-Plugin-%28Beta%29/page140 There were two files that I modified. /mnt/user/appdata/LogitechMediaServer/cache/InstalledPlugins/Plugins/Spotify/Spotifyd.pm /mnt/user/appdata/LogitechMediaServer/cache/InstalledPlugins/Plugins/Spotify/ProtocolHandler.pm I changed the following lines: from: my $host = Slim::Utils::Network::serverAddr(); to: my $host = "x.x.x.x"; where x.x.x.x is my unraid server ip routable from the player. Hope this helps! Jeff Edit: I forgot to mention that the default port for the plugin is 9005. Within the docker configuration, I forwarded both TCP and UDP on port 9005. I don't use the Spotify plugin myself, but that's some awesome work there mate nailing down that... Quote Link to comment
DWJames Posted November 23, 2015 Share Posted November 23, 2015 Hi James and any others that are having trouble with the Triode Spotify Plugin within the docker container, Yessss!!!!! that's working great now. Thanks so much for finding the time to investigate this and to share your findings I can transfer everything across and fully decommission my old NAS now that all functionality is now replaced in my unraid install. great thanks, James Quote Link to comment
majormojo Posted November 25, 2015 Share Posted November 25, 2015 Woot! Glad I could finally give back. Pay it forward! Jeff Quote Link to comment
ijuarez Posted November 25, 2015 Share Posted November 25, 2015 Hi James and any others that are having trouble with the Triode Spotify Plugin within the docker container, I have been battling this issue for about a month now and finally spent the day trying to get to the root. If you change the network mode of the docker container to 'host' you will notice that the spotify plugin works great. This confirmed that it was definitely a networking issue. I realized that the whole plugin test was actually streaming from the remote player, it dawned on me that the player needs to stream from the LMS, duh. You can see from the Information tab of LMS that the internal IP is NOT the same as the unraid host. So, with docker bridge mode, it is NAT'ing into the container, and the ports you indicated as forwarding are indeed required, however, the IP that the spotify plugin is "announcing" to the client player is the internal IP which it cannot resolve. So that was the long answer. There is currently no way to configure the 'external IP' of the docker container to the player. The solution was to jump into the code and hard code the external IP. I found an example of this issue at http://forums.slimdevices.com/showthread.php?79706-Announce-Spotify-Premium-Plugin-%28Beta%29/page140 There were two files that I modified. /mnt/user/appdata/LogitechMediaServer/cache/InstalledPlugins/Plugins/Spotify/Spotifyd.pm /mnt/user/appdata/LogitechMediaServer/cache/InstalledPlugins/Plugins/Spotify/ProtocolHandler.pm I changed the following lines: from: my $host = Slim::Utils::Network::serverAddr(); to: my $host = "x.x.x.x"; where x.x.x.x is my unraid server ip routable from the player. Hope this helps! Jeff Edit: I forgot to mention that the default port for the plugin is 9005. Within the docker configuration, I forwarded both TCP and UDP on port 9005. I don't used this but for those who do, ya'll should buy him a beer! Quote Link to comment
Cornelius Posted November 27, 2015 Share Posted November 27, 2015 Hi, I´m trying to install the the shairport2_plugin ( https://github.com/disaster123/shairport2_plugin ) within the LMS docker container, but I can not get it to work. Has anyone got this working or can give me a hint how to install the plugin? thanks, Cornelius Quote Link to comment
RAINMAN Posted November 28, 2015 Share Posted November 28, 2015 Any chance to get the madsonic docker updated to v6? Scratch that v6 is beta. Quote Link to comment
Nem Posted November 29, 2015 Share Posted November 29, 2015 Does dropbox allow for local LAN syncing of files? Quote Link to comment
piotrasd Posted December 12, 2015 Share Posted December 12, 2015 hi @gfjardim any hope to update CUPS to latest 2.1.2 version with support El Capitan macOS ? Quote Link to comment
squirrellydw Posted December 16, 2015 Share Posted December 16, 2015 I have an old HP Laserjet 4L that I would like to hook up to unRaid using and Parallel to USB adapter and CUPS. Anyone know if this will work? Quote Link to comment
capler Posted December 29, 2015 Share Posted December 29, 2015 Does dropbox allow for local LAN syncing of files? I can't figure out how to do LAN sync either. Anyone? Quote Link to comment
smoldersonline Posted January 1, 2016 Share Posted January 1, 2016 Happy New Year to all! Thanks a lot for the BTSync docker. I've tried (with trail & error) one or two sync alternatives but now believe BTSync works best for me. How can I best get this updated to the most recent version? Additionally, is it possible for me to upgrade to the Pro version? Again, many thanks! Quote Link to comment
CHBMB Posted January 20, 2016 Share Posted January 20, 2016 Happy New Year to all! Thanks a lot for the BTSync docker. I've tried (with trail & error) one or two sync alternatives but now believe BTSync works best for me. How can I best get this updated to the most recent version? Additionally, is it possible for me to upgrade to the Pro version? Again, many thanks! gfjardim hasn't been seen for quite a while, you may be better off looking for containers from alternative sources, hopefully this is just a temporary thing, and gfjardim is still alive and well, just having to concentrate on other matters for a while, but dlandon has also had to take u the unassigned devices plugin due to gfjardims' leave of absence... Quote Link to comment
danger781 Posted March 21, 2016 Share Posted March 21, 2016 Hi gfjardim, I have your Transmission docker installed for months now without issue. However I have noticed my docker utilization getting larger and larger over time and it looks like Transmission was to blame. I had 4 movies downloading over the last few days and then my docker utilization hit 100%. After some testing I found that Transmission was storing some files in: /var/lib/docket/btrfs/subvolumes/<TransmissionID>/data Found about 12GB of my 15GB consumed in there.. Any ideas? Quote Link to comment
gfjardim Posted March 21, 2016 Author Share Posted March 21, 2016 Hi gfjardim, I have your Transmission docker installed for months now without issue. However I have noticed my docker utilization getting larger and larger over time and it looks like Transmission was to blame. I had 4 movies downloading over the last few days and then my docker utilization hit 100%. After some testing I found that Transmission was storing some files in: /var/lib/docket/btrfs/subvolumes/<TransmissionID>/data Found about 12GB of my 15GB consumed in there.. Any ideas? No idea on what's happening. It's being an era since I updated this container, and I'm considering deprecating it. I do recommend you to migrate to Linuxserver's one. Best regards. Quote Link to comment
danger781 Posted March 21, 2016 Share Posted March 21, 2016 Hi gfjardim, I have your Transmission docker installed for months now without issue. However I have noticed my docker utilization getting larger and larger over time and it looks like Transmission was to blame. I had 4 movies downloading over the last few days and then my docker utilization hit 100%. After some testing I found that Transmission was storing some files in: /var/lib/docket/btrfs/subvolumes/<TransmissionID>/data Found about 12GB of my 15GB consumed in there.. Any ideas? No idea on what's happening. It's being an era since I updated this container, and I'm considering deprecating it. I do recommend you to migrate to Linuxserver's one. Best regards. Okay cool, thanks for getting back so quick Quote Link to comment
sparklyballs Posted March 22, 2016 Share Posted March 22, 2016 Hi gfjardim, I have your Transmission docker installed for months now without issue. However I have noticed my docker utilization getting larger and larger over time and it looks like Transmission was to blame. I had 4 movies downloading over the last few days and then my docker utilization hit 100%. After some testing I found that Transmission was storing some files in: /var/lib/docket/btrfs/subvolumes/<TransmissionID>/data Found about 12GB of my 15GB consumed in there.. Any ideas? docker caches volumes and you get heavy numbers with things like transmission because they tend to download big files Quote Link to comment
djgizmo Posted March 25, 2016 Share Posted March 25, 2016 I keep having dropbox exit with an error. 2016-03-25 11:13:16,962 INFO supervisord started with pid 1 2016-03-25 11:13:17,964 INFO spawned: 'config' with pid 14 2016-03-25 11:13:17,965 INFO spawned: 'Dropbox' with pid 15 2016-03-25 11:13:17,965 INFO spawned: 'DropboxStatus' with pid 16 Continous console status not requested 2016-03-25 11:13:17,968 INFO success: config entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2016-03-25 11:13:19,043 INFO success: Dropbox entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2016-03-25 11:13:19,043 INFO success: DropboxStatus entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2016-03-25 11:13:22,969 INFO exited: DropboxStatus (exit status 0; expected) 2016-03-25 11:13:23,548 INFO exited: config (exit status 0; expected) /opt/dropbox.sh: line 9: 21 Killed /home/.dropbox-dist/dropboxd 2016-03-25 11:13:32,773 INFO exited: Dropbox (exit status 137; not expected) 2016-03-25 11:13:32,809 CRIT reaped unknown pid 87) Any suggestions? Quote Link to comment
Shakula Posted March 25, 2016 Share Posted March 25, 2016 Hi James and any others that are having trouble with the Triode Spotify Plugin within the docker container, .... Thanks! Helped me also. Quote Link to comment
danger781 Posted March 28, 2016 Share Posted March 28, 2016 Hi gfjardim, I have your Transmission docker installed for months now without issue. However I have noticed my docker utilization getting larger and larger over time and it looks like Transmission was to blame. I had 4 movies downloading over the last few days and then my docker utilization hit 100%. After some testing I found that Transmission was storing some files in: /var/lib/docket/btrfs/subvolumes/<TransmissionID>/data Found about 12GB of my 15GB consumed in there.. Any ideas? Think I've figured this out. Looks CouchPotato / Me was to blame. I had set CouchPotato to use Transmission as it's download client. I had set the download location as /data from the CP GUI thinking that it would translate to the /data directory mapped to CP (/mnt/user/Downloads). However it just told Transmission to download to /data.. which is not a directory mapped to Tranmission so it obviously just chose /var/lib/docket/btrfs/subvolumes/<TransmissionID>/data. Testing now.. Quote Link to comment
djgizmo Posted March 31, 2016 Share Posted March 31, 2016 hmm... the dropbox docker doesn't seem to be syncing when adding files. However, if I delete files... it seems to sync fine. Suggestions? Here is what I see on the web log. 2016-03-30 20:28:35,178 INFO success: config entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2016-03-30 20:28:36,182 INFO success: Dropbox entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2016-03-30 20:28:36,182 INFO success: DropboxStatus entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2016-03-30 20:28:40,179 INFO exited: DropboxStatus (exit status 0; expected) 2016-03-30 20:28:42,403 INFO exited: config (exit status 0; expected) Quote Link to comment
djgizmo Posted April 4, 2016 Share Posted April 4, 2016 Can someone please assist? I'm desperate. I have no idea how to best troubleshoot this as the console messages aren't showing much. Quote Link to comment
dundundundudun Posted April 6, 2016 Share Posted April 6, 2016 what happened to the crashplan gui docker? dont see it in the app list. Quote Link to comment
Leifgg Posted April 7, 2016 Share Posted April 7, 2016 It has been deprecated since the CrashPlan container now contains a GUI as well. Check the first post in the CrashPlan thread. Quote Link to comment
lpe672 Posted April 7, 2016 Share Posted April 7, 2016 How does one disable the https redirect in owncloud? Quote Link to comment
fatalfurry Posted April 8, 2016 Share Posted April 8, 2016 I installed the CUPS docker and it doesn't see the Printer I have attached through USB. PRINTER: HP LaserJet CP1215 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.