marshy919 Posted January 28, 2018 Share Posted January 28, 2018 (edited) 2 hours ago, SiNtEnEl said: Go to your appdata from filebot and edit your filebot.conf. Set the RUN_UI to yes. If u want to change its behavour u can also change the filebot.sh script. The part to enable the UI: # Run the UI in addition to the normal non-interactive behavior. The UI uses about 460MB of RAM, as opposed to about # 20MB of RAM. On my machine it uses .33% CPU instead of .03% CPU. RUN_UI=yes Thanks for that, I enabled the settings in the conf but still no connection to the WebUI or RDP. Anything else to try? Cheers Edit: All good, needed to restart server for it to work. Edited January 28, 2018 by marshy919 Quote Link to comment
FrozenWineCloud Posted February 12, 2018 Share Posted February 12, 2018 Took me a bit, but this is working out great for me, thank you for sharing! I went the lazy route and changed my formats to {plex} in the script. Quote Link to comment
anethema Posted February 12, 2018 Share Posted February 12, 2018 (edited) @coppit I'm a bit new to the dockers, but out of curiousity: I've customezed my filebot.sh a good bit with regards to file naming, and move behavior. I have only one folder mount now, input within output, and in the docker I set the env variables INPUT_DIR and OUTPUT_DIR. My question is, will filebot updates replace my scripts/configs sometimes? Will I have to reconfigure etc? Also, is there a changelog for updates? I notice tons of my docker containers are always getting updates but I cant find update documentation anywhere. Even the git doesn't have a commit since mid 2017. Thanks! Edited February 12, 2018 by anethema Quote Link to comment
trurl Posted February 12, 2018 Share Posted February 12, 2018 14 minutes ago, anethema said: @coppit I'm a bit new to the dockers, but out of curiousity: I've customezed my filebot.sh a good bit with regards to file naming, and move behavior. I have only one folder mount now, input within output, and in the docker I set the env variables INPUT_DIR and OUTPUT_DIR. My question is, will filebot updates replace my scripts/configs sometimes? Will I have to reconfigure etc? Also, is there a changelog for updates? I notice tons of my docker containers are always getting updates but I cant find update documentation anywhere. Even the git doesn't have a commit since mid 2017. Thanks! I don't use this particular docker, but in general, anything in appdata persists after an upgrade/reinstall. Anything within the container, possibly put there by docker exec to get to a command line within the docker, will not persist after an upgrade/reinstall. Quote Link to comment
coppit Posted February 13, 2018 Author Share Posted February 13, 2018 If the script or config files update, the container exits and asks you to compare the new files versus yours. 6 hours ago, trurl said: Even the git doesn't have a commit since mid 2017. I don't think you're looking at the right git repo. I'm not the most prolific coder, but there have been changes the last few weeks. https://github.com/coppit/docker-filebot Quote Link to comment
DaemonSambe Posted February 14, 2018 Share Posted February 14, 2018 (edited) I really am not understanding why this command will not work.. commandline: docker run -d -v /volume1/Transfers/:/input:rw -v /volume1/Media/:/output:rw -v /volume1/docker/:/config:rw coppit/filebot path: /volume1/Media Media Storage /volume1/Transfers Download storage error output: [Feb 14 03:37:54 PM] OUTPUT_DIR=/output can not be a subdirectory of INPUT_DIR=/input I used to have a working filebot on this Synology NAS, but I cannot get this to boot up now. Please help. Edited February 14, 2018 by DaemonSambe Quote Link to comment
trurl Posted February 14, 2018 Share Posted February 14, 2018 2 minutes ago, DaemonSambe said: I really am not understanding why this command will not work.. commandline: docker run -d -v /volume1/Transfers/:/input:rw -v /volume1/Media/:/output:rw -v /volume1/docker/:/config:rw coppit/filebot path: /volume1/Media Media Storage /volume1/Transfers Download storage error output: [Feb 14 03:37:54 PM] OUTPUT_DIR=/output can not be a subdirectory of INPUT_DIR=/input I used to have a working filebot, but I cannot get this to boot up now. Please help. Are you trying to install this on unRAID? Those are not unRAID paths, so I assume not, and we don't normally use the command line to install dockers on unRAID. Quote Link to comment
DaemonSambe Posted February 14, 2018 Share Posted February 14, 2018 No, this is a Synology NAS. Quote Link to comment
trurl Posted February 14, 2018 Share Posted February 14, 2018 7 minutes ago, DaemonSambe said: No, this is a Synology NAS. This is an unRAID forum. I don't know if coppit has a better place to support other platforms or not. Quote Link to comment
xthursdayx Posted February 16, 2018 Share Posted February 16, 2018 Hi, i just installed this, but for some reason am unable to access the UI via HostIP:8282 (remapped from 8080) or HostIP:3389, nor am I able to access it via RDP, at HostIP, HostIP:8282 or HostIP:3389. I also tried setting my network for the container to br0 and assigning a static IP (192.168.1.112), and attempted to connect via 192.168.1.112:8080 and 192.168.1.112:3389 (in the browser) and 192.168.1.112, 192.168.1.112:8282 and 192.168.1.112:3389 via RDP - none of these worked either. Finally, I tried setting my container network to host, but this too failed. Any ideas what is wrong? The FileBot container's logs look fine. Quote Link to comment
coppit Posted February 16, 2018 Author Share Posted February 16, 2018 Did you set USE_UI to true in the config file? Quote Link to comment
Max Posted February 19, 2018 Share Posted February 19, 2018 hey guys i need some help with enabling the ui mode. earlier i was using filebotui but i had to delete it cause of some issues, so now i have realized that u have merged filebot and filebotui into one docker but i can't quite find how to enable the ui part, its currently working in auto mode and its working great but i need that ui. sorry if its already mentioned somewhere and im just being an idiot who cant even find that. Quote Link to comment
Max Posted February 20, 2018 Share Posted February 20, 2018 22 hours ago, Max said: hey guys i need some help with enabling the ui mode. earlier i was using filebotui but i had to delete it cause of some issues, so now i have realized that u have merged filebot and filebotui into one docker but i can't quite find how to enable the ui part, its currently working in auto mode and its working great but i need that ui. sorry if its already mentioned somewhere and im just being an idiot who cant even find that. @coppit or anyone, i could use help. Quote Link to comment
alturismo Posted February 20, 2018 Share Posted February 20, 2018 checked your filebot.conf ? # Run the UI in addition to the normal non-interactive behavior. The UI uses about 460MB of RAM, as opposed to about # 20MB of RAM. On my machine it uses .33% CPU instead of .03% CPU. RUN_UI=no Quote Link to comment
xthursdayx Posted February 21, 2018 Share Posted February 21, 2018 (edited) On 2/16/2018 at 8:53 AM, coppit said: Did you set USE_UI to true in the config file? Yes, it still doesn't appear to be working.... neither via browser or RDP. Any ideas? Should the network type be Bridge or br0? Edited February 21, 2018 by zandrsn Quote Link to comment
Max Posted February 25, 2018 Share Posted February 25, 2018 finally !! i got it working. i wasn't able to make changes to filebot.conf file, i was getting some permission related errors, so i just delete created a new one, copy pasted text from old one to the new one and then i changed "RUN_UI=No" to "RUN_UI=Yes" and boom it started working!!! Quote Link to comment
Urlryn Posted February 27, 2018 Share Posted February 27, 2018 (edited) Been using GUI filebot for a long time with no issues...but decided to try the docker version. So I just installed the docker...thought I had the configs done and ran a test. Nothing happened. So decided to check the logs...and it looks like permissions issues Locking /config/amc.log Error during startup: java.nio.file.AccessDeniedException: /nobody/.filebot/cache java.lang.ExceptionInInitializerError at net.filebot.Main.main(Main.java:107) Caused by: net.sf.ehcache.CacheException: java.nio.file.AccessDeniedException: /nobody/.filebot/cache at net.filebot.CacheManager.<init>(CacheManager.java:36) at net.filebot.CacheManager.<clinit>(CacheManager.java:22) ... 1 more Caused by: java.nio.file.AccessDeniedException: /nobody/.filebot/cache at net.filebot.util.FileUtilities.createFolders(FileUtilities.java:183) at net.filebot.CacheManager.acquireDiskStore(CacheManager.java:73) at net.filebot.CacheManager.<init>(CacheManager.java:33) ... 2 more /files/filebot.sh: line 56: /tmp/tmp.Lcc6U1bZRb: Permission denied sort: write failed: standard output: Broken pipe sort: write error Went to look at the permission for /nobody/.filebot/cache? drwxr-xr-x 1 nobody users 86 Feb 27 14:05 nobody The changed directory to .filebot and the cache directory and everything thats supposed to go under it isn't being created. For a test I manually created each of the folders and the .lock file. Chmod 0777 all of it and it started running. Stop filebot...start it again. cache and everything under it is removed and permissions on nobody/.filebot are reverted back. Checking the /tmp folder permissions (which i've never touched since installing unraid)...it looks like its root/root. Should I change the permission on that folder or point it to another directory like /config/tmp? So there is definitely some permission issues...just what do i need to do to fix this mess? Thanks Urlryn Edited February 27, 2018 by Urlryn Quote Link to comment
Urlryn Posted February 28, 2018 Share Posted February 28, 2018 Well got it to finally work. Probably not the way it should be working. If not...would welcome some recommendations on how to fix. First I had to change user_ID to 0 (root) and Group_ID to 0 (root) instead of using Nobody/Users. Also when the new folders were being created...they were being set with no permissions at all. So needed to update the script to include --def "exec=chmod -R 777 '{folder}'" Some folks reported issues sometimes with the above command. You may need to escape the quotes. --def "exec=chmod -R 777 \"{folder}/\" Some info I found in a post from rednoah Quote {folder} is the parent folder of {f}. If you want to go up one level then you can use {folder.dir} or {f.dir.dir} or {f[-3]} Since I wasn't finding a whole lot regarding this problem...Thought I'd throw up a bit more information for other folks. Urlryn Quote Link to comment
xleejohnx Posted March 3, 2018 Share Posted March 3, 2018 (edited) how do you make filebot delete files out of the input folder once its been moved into the output? i got it working now had to use move not copy in action Edited March 4, 2018 by xleejohnx Quote Link to comment
ColeBrodine Posted March 19, 2018 Share Posted March 19, 2018 I saw this in the lounge and thought it might be of some interest here. Filebot is starting a Patreon to further Linux support: https://www.patreon.com/filebot/posts From their Patreon page: Quote FileBot currently only officially supports Windows 10 and macOS because these platforms make it easy to sell software via their respective app stores. Unfortunately, selling software on Ubuntu, Synology NAS, etc is not as easy and not really worth the effort considering the small number of users willing to support the project. This Patreon is an experiment to see how many users are willing to financially contribute towards freely available donation-supported new releases on these platforms. Let's find out if we can find 1000 users that are interested in FileBot for Linux! NOTE 1: This Patreon is "$1 per release" and not "$1 per month". I expect to collect pledges for new releases 3 or 4 times per year. NOTE 2: The SNAP and SPK packages will be released in the public repository and will be available to everyone. However, DEB packages will be published in the Patron-only feed. Quote Link to comment
unRaide Posted April 8, 2018 Share Posted April 8, 2018 Hi, Just got this docker up and running but i can't for the life of me figure out how to rename folders in addition to files. Everything i've seen online mentions that you need to hold down Ctrl-Shift when dragging and dropping files onto the window although that won't work using the docker. I did found that if you right click the Load button it gives you the option of Selecting Folders or Files however even if i pick Folders only it's files show up.... Has anyone figured out way to do this? Thanks Quote Link to comment
ColeBrodine Posted April 11, 2018 Share Posted April 11, 2018 On 4/7/2018 at 11:59 PM, unRaide said: Hi, Just got this docker up and running but i can't for the life of me figure out how to rename folders in addition to files. Everything i've seen online mentions that you need to hold down Ctrl-Shift when dragging and dropping files onto the window although that won't work using the docker. I did found that if you right click the Load button it gives you the option of Selecting Folders or Files however even if i pick Folders only it's files show up.... Has anyone figured out way to do this? Thanks If you select the folder, only the files will show up but if Filebot renames every file in the folder it should place them in a new folder structure that you setup and remove the old folder. If even one file stays in the old folder, the old folder will need to be manually removed. Quote Link to comment
InfInIty Posted April 21, 2018 Share Posted April 21, 2018 My apologies if I missed my answer somwhere in this post. I want to set this container up to run headless and run the AMC script. It can watch the input folder, run the amc script to the output folder. I loaded this through the community apps plugin, and unfortunatly cannot get to the GUI, all though its really not needed if the way i want to run this is possible. Anyone with some tips on how to get this setup like that would be greatly appreciated. Quote Link to comment
Prokie Posted April 25, 2018 Share Posted April 25, 2018 Can I choose to download more than one language in subs for example en and swe? Quote Link to comment
kizer Posted April 29, 2018 Share Posted April 29, 2018 On 4/20/2018 at 8:06 PM, InfInIty said: My apologies if I missed my answer somwhere in this post. I want to set this container up to run headless and run the AMC script. It can watch the input folder, run the amc script to the output folder. I loaded this through the community apps plugin, and unfortunatly cannot get to the GUI, all though its really not needed if the way i want to run this is possible. Anyone with some tips on how to get this setup like that would be greatly appreciated. Edit the files in your FileBot folder. filebot.conf # Run the UI in addition to the normal non-interactive behavior. The UI uses about 460MB of RAM, as opposed to about # 20MB of RAM. On my machine it uses .33% CPU instead of .03% CPU. RUN_UI=no <------- change this to yes if you want to use the GUI. I personally don't. I just drop my files in the watcher folder and forget about them. filebot.sh To change the way your files are outputted when they are moved to your outgoing folder Just in case you get confused to where these files are mine are in the following location. /mnt/cache/system/appdata/FileBot/ Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.