January 2, 20215 yr 1 hour ago, Deazo said: Hi all, apologies if this issue has been brought up already. I am having difficulties with Plex not displaying my content. It looks related to what I can find in the log (see screenshot attached). Does any of you know why I get all these errors? Thank you in advance! D. Is this from plex's free stuff? I would think it's better to ask Plex directly.
January 2, 20215 yr 55 minutes ago, saarg said: Is this from plex's free stuff? I would think it's better to ask Plex directly. I don't know, I am not even sure why all these sources are consulted. BUT it looks like a connectivity issue, right? So more like an unraid/docker issue to me. Also, it is not just the free stuff that is not accessible from within Plex now, it's all my content. Anyone has an idea? Thanks
January 2, 20215 yr 4 hours ago, Deazo said: I don't know, I am not even sure why all these sources are consulted. BUT it looks like a connectivity issue, right? So more like an unraid/docker issue to me. Also, it is not just the free stuff that is not accessible from within Plex now, it's all my content. Anyone has an idea? Thanks Have you done any changes lately?
January 3, 20215 yr No change whatsoever, no. EDIT: I think it is coming from plugins that no longer work, in particular Trailer Addict plugin. I removed it and the errors are gone. Thanks for the support Edited January 3, 20215 yr by Deazo
January 3, 20215 yr I've just updated to the latest version of the docker container and im now limited to 600kbps remote streaming. My upload speed is 750mbps (75 MB/s). Remote Access upload speed is set to 500mbps with limit remote stream bitrate set to 20mbps 1080p. Treat WAN IP As LAN Bandwidth is enabled in Netowork settings and Enable Relay is turned off. Transcoding and original play are both working fine locally and the 600kbps is consistent across multiple remote networks. Local IP is static and ports are open, has changed since the update other than to try and fix the issue. Any thoughts?
January 3, 20215 yr 4 minutes ago, more11o said: Any thoughts? Have you actually tested your ISP up speed?
January 3, 20215 yr Just now, trurl said: Have you actually tested your ISP up speed? Yes, both with Google and Ookla.
January 5, 20215 yr Having weird playback issues what seems to be new tv shows, where it only plays locally from one tv. When I test local play back from a web browser it will not load and from certain TVs locally. Remote users started reporting this issue and i was able to replicate it only from these devices. Also, its only a certain new shows but not all Here are logs I just pulled from the event: Jan 05, 2021 08:23:08.000 [0x14718d435700] ERROR - [Transcoder] Error while decoding stream #0:1: Input/output error Jan 05, 2021 08:23:10.923 [0x14715c3e1700] DEBUG - [Transcode] Exists("/tmp/Transcode/Sessions/plex-transcode-op8zrkoc1khqki85qvvy1ewz-4d430dbf-6372-4d7b-b64c-060730503b47/init-stream0.m4s") => 0 Jan 05, 2021 08:23:10.923 [0x14718dcdf700] DEBUG - Completed: [192.168.1.19:63650] 404 GET /video/:/transcode/universal/dash/op8zrkoc1khqki85qvvy1ewz/0/initial.mp4 (9 live) TLS GZIP 120098ms 458 bytes (pipelined: 1) Jan 05, 2021 08:23:11.000 [0x1470d3dfe700] ERROR - [Transcoder] [eac3_eae @ 0x754ec0] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-f7b23fa4-dc9e-4799-8a2a-100251c08554/EasyAudioEncoder/Convert to WAV (to 8ch or less)/op8zrkoc1khqki85qvvy1ewz_468-0-168.wav' Jan 05, 2021 08:23:11.000 [0x14715c9e4700] ERROR - [Transcoder] [eac3_eae @ 0x754ec0] error reading output Jan 05, 2021 08:23:11.000 [0x14718c62e700] ERROR - [Transcoder] Error while decoding stream #0:1: Input/output error Jan 05, 2021 08:23:14.000 [0x14715c3e1700] ERROR - [Transcoder] [eac3_eae @ 0x754ec0] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-f7b23fa4-dc9e-4799-8a2a-100251c08554/EasyAudioEncoder/Convert to WAV (to 8ch or less)/op8zrkoc1khqki85qvvy1ewz_468-0-169.wav' Jan 05, 2021 08:23:14.000 [0x1470d3dfe700] ERROR - [Transcoder] [eac3_eae @ 0x754ec0] error reading output Jan 05, 2021 08:23:14.000 [0x14718d8dd700] ERROR - [Transcoder] Error while decoding stream #0:1: Input/output error Jan 05, 2021 08:23:17.000 [0x14718c62e700] ERROR - [Transcoder] [eac3_eae @ 0x754ec0] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-f7b23fa4-dc9e-4799-8a2a-100251c08554/EasyAudioEncoder/Convert to WAV (to 8ch or less)/op8zrkoc1khqki85qvvy1ewz_468-0-170.wav' Jan 05, 2021 08:23:17.000 [0x14715c9e4700] ERROR - [Transcoder] [eac3_eae @ 0x754ec0] error reading output Jan 05, 2021 08:23:17.000 [0x14715c3e1700] ERROR - [Transcoder] Error while decoding stream #0:1: Input/output error Jan 05, 2021 08:23:20.000 [0x14718d8dd700] ERROR - [Transcoder] [eac3_eae @ 0x754ec0] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-f7b23fa4-dc9e-4799-8a2a-100251c08554/EasyAudioEncoder/Convert to WAV (to 8ch or less)/op8zrkoc1khqki85qvvy1ewz_468-0-171.wav' Jan 05, 2021 08:23:20.000 [0x14718c62e700] ERROR - [Transcoder] [eac3_eae @ 0x754ec0] error reading output Plex version 1.21.1.3842 Edited January 5, 20215 yr by brasiledo
January 5, 20215 yr I'm having an issue with Plex. To be honest, I don't really think it has anything to do with the linuxserver's docker container of Plex, but I'm not sure where else to ask. I was running the deprecated version of Plex's official docker container when I started noticing that I couldn't play my media, even if I was local. It looked like I needed to claim my server again, so I tried to do that. However, even though I clicked claim, nothing happened (screenshot attached below). I tried different browsers, incognito, and all of that. Couldn't do it. So I decided to uninstall the docker container (since it was deprecated) and reinstall Plex again. I also removed my appdata folder for good measure. I reinstalled linuxserver's version of Plex. But upon starting it, it tried to sign back into my account, which I thought was odd since I removed the appdata folder and reinstalled Plex. It should have been a clean set up (obviously my understanding is wrong since it wasn't a clean set up). Anyway, same issue. Can't claim the server. Go to the website and try to login and I'm met with this error (attached below as well). It's the right sign in information and everything. Honestly, I don't know what's going on. I tried Googling it, and it seems like some other people have had my issue, but no solutions. I'm hoping someone could shed some light on what's going on or how to fix it. Even if it's starting over from scratch, that's fine, just tell me how to do it because apparently uninstalling the docker container and removing the appdata folder isn't enough. Logs look okay too. No errors.
January 5, 20215 yr 1 hour ago, N¿¿B said: I'm having an issue with Plex. To be honest, I don't really think it has anything to do with the linuxserver's docker container of Plex, but I'm not sure where else to ask. I was running the deprecated version of Plex's official docker container when I started noticing that I couldn't play my media, even if I was local. It looked like I needed to claim my server again, so I tried to do that. However, even though I clicked claim, nothing happened (screenshot attached below). I tried different browsers, incognito, and all of that. Couldn't do it. So I decided to uninstall the docker container (since it was deprecated) and reinstall Plex again. I also removed my appdata folder for good measure. I reinstalled linuxserver's version of Plex. But upon starting it, it tried to sign back into my account, which I thought was odd since I removed the appdata folder and reinstalled Plex. It should have been a clean set up (obviously my understanding is wrong since it wasn't a clean set up). Anyway, same issue. Can't claim the server. Go to the website and try to login and I'm met with this error (attached below as well). It's the right sign in information and everything. Honestly, I don't know what's going on. I tried Googling it, and it seems like some other people have had my issue, but no solutions. I'm hoping someone could shed some light on what's going on or how to fix it. Even if it's starting over from scratch, that's fine, just tell me how to do it because apparently uninstalling the docker container and removing the appdata folder isn't enough. Logs look okay too. No errors. Try removing the server from the Plex 'Authorised devices' in the Web GUI on a browser and then try to reclaim your server. I too struggled till I tried this approach. I hope that solves the issue for you.
January 5, 20215 yr 2 hours ago, Jase said: Try removing the server from the Plex 'Authorised devices' in the Web GUI on a browser and then try to reclaim your server. I too struggled till I tried this approach. I hope that solves the issue for you. Can't log in via Web GUI or anything anymore. No idea what's going on.
January 7, 20215 yr I have been running Plex in docker for quite a while now and never had issues until last night. Starting last evening none of my media with EAC3 audio will play in Plex now (Roku, Shield, or Web). I have tried changing the transcode folder location, deleting my codecs, turning off automatic library scanning, verifying that my Unraid servers inotify value isn't too low (it's over 500K, tried increasing to 1mill no change and changed back to default value), restored docker container from backup, completely blew it up and did fresh install of Plex. Nothing has resolved this issue in the last 18 hours. Only thing that happened was that my power went out yesterday afternoon for a couple hours and my Unraid server shut down (gracefully, it's connected to APC UPS and it sent the shutdown command at 20%). Anyone have any other ideas? Been using Plex for like 10 years now, and on Unraid for the last 2-3 without any issues. I have about 1500 movies, 200 TV shows (15K episodes), 2k Music, and another 200 misc documentaries/specials. Nothing crazy compared to what I've seen others host.
January 8, 20215 yr Anyone know what Plex folders can be excluded in CA Backup / Restore application? I heard that you don't need to back up the entire Plex appdata directory. It takes quite a while to do a backup now and I suspect that the Plex files are responsible.
January 11, 20215 yr First off I'm running unRaid NVIDIA 6.8.3 2020-03-05 because I run a gaming VM. Plex used to work fine and randomly started getting this error and becomes unresponsive. I do not know if a container update started causing this, as I didn't notice it until it stopped working. The only way to bypass is is to delete the Preferences.XML file, and restart. This sets up the server as a "new" server but it works. All the shares are still there. As soon as I made a change to any settings within Plex (ie. enable auto discovery,) I get this error again. I have a backup of my plex directory and tried running it with the plexinc container and still got the same error. I'm assuming this is an unRaid problem more than than a plex problem. Any help would be highly appreciated.
January 11, 20215 yr 46 minutes ago, techukie said: First off I'm running unRaid NVIDIA 6.8.3 2020-03-05 because I run a gaming VM. Plex used to work fine and randomly started getting this error and becomes unresponsive. I do not know if a container update started causing this, as I didn't notice it until it stopped working. The only way to bypass is is to delete the Preferences.XML file, and restart. This sets up the server as a "new" server but it works. All the shares are still there. As soon as I made a change to any settings within Plex (ie. enable auto discovery,) I get this error again. I have a backup of my plex directory and tried running it with the plexinc container and still got the same error. I'm assuming this is an unRaid problem more than than a plex problem. Any help would be highly appreciated. Looks like you should check your disk for errors.
January 14, 20215 yr For the past week or so whenever I load Plex Media Player or on browser, the recommended tab and home page fails to load. The home page states "there was an error loading your home screen. Please try again in a few minutes." Anyone know a way to fix this? It's been pretty annoying.
January 16, 20215 yr On 12/5/2020 at 6:45 AM, XisoP said: Hey all, I just upgraded my PMS image from very old to 1.21.latest. I now see a version not available in the docker overview. Is this common or is there something wrong in my config? Similar to XisoP, but I'm not coming from old build. I'm currently running 1.21.1.3876 (which is current, at time of posting) and running "check for updates" doesn't change the "not available" message. I've also tried restarting the docker image; no luck. I'm just about out of ideas. Do any of you fine folks have a suggestion I can try? Edited January 16, 20215 yr by Kudjo
January 21, 20215 yr Lots of buffering lately. A Roku on a wired gigabit connection and a laptop with the web client on a 5GHz wifi connection. i7-2600 is virtually sitting idle, its definitely not resource related on the server end or network related. Shows will play fine, suddenly I get the gold circle, sometimes it plays again shortly, other times I get the error telling me my network connection is too slow (even on the wired gig Roku). Any ideas?
January 21, 20215 yr Checked my Plex GUI no access so I checked the log it was stuck in a loop so I deleted the docker and ran the setup now I am getting this on startup. [cont-init.d] 10-adduser: exited 0. [cont-init.d] 40-chown-files: executing... [cont-init.d] 40-chown-files: exited 0. [cont-init.d] 45-plex-claim: executing... Temporarily starting Plex Media Server. Waiting for Plex to generate its config Waiting for database creation to complete... Waiting for database creation to complete... Its been running for about 10 minutes this is what is running; USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 200 4 ? Ss 17:15 0:00 s6-svscan -t0 /var/run/s6/services root 33 0.0 0.0 184 8 ? S 17:15 0:00 foreground if /etc/s6/init/init-stage2-redirfd foregro root 34 0.0 0.0 200 4 ? S 17:15 0:00 s6-supervise s6-fdholderd root 45 0.0 0.0 184 8 ? S 17:15 0:00 if /etc/s6/init/init-stage2-redirfd foreground if if root 46 0.0 0.0 184 12 ? S 17:15 0:00 foreground if if s6-echo -n -- [s6-init] mak root 52 0.0 0.0 180 4 ? S 17:15 0:00 if if -t s6-test -d /var/run/s6/etc/cont-init.d root 210 0.0 0.0 180 4 ? S 17:15 0:00 if pipeline s6-ls -0 -- /var/run/s6/etc/cont-init. root 213 0.0 0.0 196 8 ? S 17:15 0:00 forstdin -o 0 -0 -- i importas -u i i if s6-echo -- [con root 214 0.0 0.0 0 0 ? Z 17:15 0:00 [s6-ls] <defunct> root 215 0.0 0.0 0 0 ? Z 17:15 0:00 [s6-sort] <defunct> root 257 0.0 0.0 180 4 ? S 17:15 0:00 foreground /var/run/s6/etc/cont-init.d/45-plex-claim impo root 259 0.0 0.0 6976 3452 ? S 17:15 0:00 bash /var/run/s6/etc/cont-init.d/45-plex-claim root 1978 0.0 0.0 7240 3928 pts/0 Ss 17:30 0:00 bash root 2205 0.0 0.0 5480 532 ? S 17:31 0:00 sleep 1 root 2206 0.0 0.0 8896 3320 pts/0 R+ 17:31 0:00 ps -aux
January 23, 20215 yr I think I have this container... Has anyone recently had issues regarding Duplicates? I've downloaded a couple superior sources and rather than Duplicating them, they've been added as separate movies in the library, one even with differing artwork to the default of the original.
January 24, 20215 yr Guys, I have this version of Plex running well on my unRAID server. I have a 1650 GPU in my box and use it for hardware transcoding. I also have a Ryzen 3200g with integrated Radeon Vega 8 graphics. Lately I have been considering setting up a VM to stream games and apps to my laptop instead of buying a new more powerful laptop. This means directing the 1650 to the VM. Is it possible to use the Radeon Vega instead of the 1650 for hardware transcoding and will it be any good?
January 24, 20215 yr 3 hours ago, NMGMarques said: Is it possible to use the Radeon Vega instead of the 1650 for hardware transcoding and will it be any good? Perhaps. Plex does not officially support AMD GPUs (integrated or PCIe) for transcoding in Linux/Docker. Some say they have managed to make it work, so perhaps you have a shot, but, Plex won't help you with it if you have problems. Here is a recent post on the Plex forums from someone who says they were successful in getting in to work.
January 25, 20215 yr Hi All i know it may have been mentioned in here but to save me reading 192 pages. is anyone able to confirm if there is a fix for the cache write issue? is it as simple as changing from BTRFS to XFS? Thanks
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.