JonathanM Posted April 13, 2017 Share Posted April 13, 2017 3 minutes ago, ashman70 said: Its messing up when it copies episodes, it either doesn't copy the whole file, just some of it, or it gets stuck copying and I end up with a partial file copied. Post your docker mappings and the corresponding paths internal to sonarr. Quote Link to comment
ashman70 Posted April 13, 2017 Share Posted April 13, 2017 How do I post them internal to Sonarr? Quote Link to comment
JonathanM Posted April 13, 2017 Share Posted April 13, 2017 8 minutes ago, ashman70 said: How do I post them internal to Sonarr? For the series you are troubleshooting, what is the path listed inside Sonarr? It's shown below the title block of the series or in the popup that comes up when you click on the wrench to edit the series. Quote Link to comment
ashman70 Posted April 13, 2017 Share Posted April 13, 2017 Here is a screen shot of the docker settings. At the moment I can't bring up the web ui of the docker, it won't load, it just spins and spins trying to load. Quote Link to comment
Darqfallen Posted April 13, 2017 Share Posted April 13, 2017 There's your problem @ashman70 Your host path 3 for TV. Do you have another server as a samba mount at that point? Are you not using your unraid as your fileserver? Mine is set to /mnt/user/TV As this is the root directory of my TV share. Quote Link to comment
Squid Posted April 13, 2017 Share Posted April 13, 2017 Additionally, since the mount for path 3 is done via UD and is external to your server, the mappings must be set to RW:SLAVE (edit the path on the template, and change the access mode) Quote Link to comment
ashman70 Posted April 13, 2017 Share Posted April 13, 2017 So yes I have a Samba share mounted to another server, the idea is that Sonarr will send a download request to sabNZB who will in turn download the file then it will get copied to the Samba share. It was working ok until Sonarr started screwing up and I had two hard resets of my server, then I removed the Sonarr docker and added it back and now its messing up again. Quote Link to comment
ashman70 Posted April 13, 2017 Share Posted April 13, 2017 Ok I edited the edited the mappings Squid, unRAID is now trying to stop the docker to apply them...... Quote Link to comment
ashman70 Posted April 13, 2017 Share Posted April 13, 2017 This is where I am for the past 5 minutes. Is there a command to forcibly stop the container? Quote Link to comment
ashman70 Posted April 13, 2017 Share Posted April 13, 2017 So now I have a blinking cursor at the command prompt on the server after I entered the command docker kill sonarr. I can't do a hard reset at the moment because I am at about 60% on a parity check......great Quote Link to comment
ashman70 Posted April 13, 2017 Share Posted April 13, 2017 ok that got be back to the command prompt, anything I should type now? Quote Link to comment
Squid Posted April 13, 2017 Share Posted April 13, 2017 not really docker kill should've stopped the container. Wait til the par check is done... Quote Link to comment
ashman70 Posted April 13, 2017 Share Posted April 13, 2017 It didn't the sonarr docker/container is still running. Quote Link to comment
Darqfallen Posted April 14, 2017 Share Posted April 14, 2017 Thank you for using mono's depot instead of sonarr's for mono. This has fixed all my issues! Quote Link to comment
ashman70 Posted April 14, 2017 Share Posted April 14, 2017 (edited) Ok so my parity check is almost done. I have a docker/container I can't stop and because of this I can't unmount my array cleanly and because of this I have to do a dirty shutdown and reboot. Oh and the webui for sonarr won't load either. Suggestions? Edited April 14, 2017 by ashman70 Quote Link to comment
ashman70 Posted April 14, 2017 Share Posted April 14, 2017 Still having massive issues with Sonarr, had to hard reset my server again today because the docker was unresponsive and I can't unmount my array. Uninstalled it again, reinstalled it, its still downloading episodes but what gets copied to my other server is not the amount that is downloaded and as a consequence downloaded/copied episodes don't play properly because they are not the same file size as what was downloaded. Quote Link to comment
fonzie Posted April 14, 2017 Share Posted April 14, 2017 14 minutes ago, ashman70 said: Still having massive issues with Sonarr, had to hard reset my server again today because the docker was unresponsive and I can't unmount my array. Uninstalled it again, reinstalled it, its still downloading episodes but what gets copied to my other server is not the amount that is downloaded and as a consequence downloaded/copied episodes don't play properly because they are not the same file size as what was downloaded. I had similar issues in the past and I think I narrowed the incomplete files down to having my drone search folder interval set too low. I had it check every minute for downloaded files. This would prompt a move to the TV share folder on files that were currently being extracted and as a result, incomplete. Quote Link to comment
ashman70 Posted April 14, 2017 Share Posted April 14, 2017 I am no using the drone feature in Sonarr, but thanks. Quote Link to comment
mr-hexen Posted April 15, 2017 Share Posted April 15, 2017 What are path settings in Sonarr for post processing? Quote Link to comment
tucansam Posted April 17, 2017 Share Posted April 17, 2017 On 3/17/2017 at 5:55 AM, tucansam said: Its working. One question. I actually had this same problem with sickbeard/sab, and then sickrage/sab, and now sonarr/sab. So I'm thinking its sab, but I gotta check. When I added shows in sonarr, it found each show in its respective folder. When I edit each show, it shows the correct path, let's say "Show1 (2016)" or "SHOW2" (note case) I am finding multiple folders now being generated. Some episodes download into "Show1 (2016)" and "SHOW2." Other shows are being downloaded into newly created folders, ie, "Show1 2016" (no parenthesis) or "show1 2016" (note case) or "show2" (note case) or "Show2" (note case). Any idea what's causing this? I am regularly having to move files into the correctly named folder (the one sonarr is configured to use) and then delete the newly created extra folders. Thanks. This is still happening weekly if not daily. I am constantly having to go through my share and move files from duplicate (not exactly duplicate I guess) folder names to the correct ones. Still no idea what's causing this. Quote Link to comment
CHBMB Posted April 18, 2017 Share Posted April 18, 2017 Got any postprocessing going on in sabnzbd? Sent from my LG-H815 using Tapatalk Quote Link to comment
tucansam Posted April 18, 2017 Share Posted April 18, 2017 16 minutes ago, CHBMB said: Got any postprocessing going on in sabnzbd? Sent from my LG-H815 using Tapatalk An honest question -- how do I tell? Quote Link to comment
TexasDave Posted April 18, 2017 Share Posted April 18, 2017 Not sure if folks have seen this neat little script from spoatacus called "Sonarr Episode Trimmer". See: https://gitlab.com/spoatacus/sonarr-episode-trimmer It solves an issue I have wanted for some time. Basically if you record "daily shows" this allows you to set a maximum number of shows and deletes "old" shows above that number. You can do this by hand but as the idea is to automate where possible, I found this very handy. I wish it was part of Sonarr. Hope this is useful for others. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.