kamhighway Posted June 3, 2019 Share Posted June 3, 2019 Is anyone having trouble with Sonarr communicating with Jackett? I am running Unraid 6.7.0 with the latest linuxserver.io Sonarr and Jackett dockers which had been working flawlessly. This morning Sonarr reported that none of Jackett's indexers were working. I saw there was an update to Jackett and thought that might fix it. It did not. I noticed that the url Jackett gives for a torznab feed is quite different than what I had in Sonarr when I originally set up Jackett. I updated one of my Sonarr indexers with the new torznab feed but the indexer would not pass the test connection. The only other setting for the Sonarr indexer is API which I left at /api. Does anyone know if that has changed? Thanks in advance. Quote Link to comment
gacpac Posted June 5, 2019 Share Posted June 5, 2019 Is anyone having trouble with Sonarr communicating with Jackett? I am running Unraid 6.7.0 with the latest linuxserver.io Sonarr and Jackett dockers which had been working flawlessly. This morning Sonarr reported that none of Jackett's indexers were working. I saw there was an update to Jackett and thought that might fix it. It did not. I noticed that the url Jackett gives for a torznab feed is quite different than what I had in Sonarr when I originally set up Jackett. I updated one of my Sonarr indexers with the new torznab feed but the indexer would not pass the test connection. The only other setting for the Sonarr indexer is API which I left at /api. Does anyone know if that has changed? Thanks in advance.Now that you say that. It gives me that error sometimes, but then It goes away. If I'm desperate all I do is make sure the API or link hasn't changed and go from there. I also have it in its own docker network working alongside transmission VPN, but you don't have to do all that. Sent from my Pixel 2 XL using Tapatalk Quote Link to comment
kamhighway Posted June 7, 2019 Share Posted June 7, 2019 Jackett started working again today. I did not do anything to fix it. Quote Link to comment
gacpac Posted June 10, 2019 Share Posted June 10, 2019 Jackett started working again today. I did not do anything to fix it. Yep. It fixes on its own I figured. Really don't know what breaksSent from my Pixel 2 XL using Tapatalk Quote Link to comment
shimee Posted September 3, 2019 Share Posted September 3, 2019 HI All, I have an issue with Jackett, I just did a cache disk swap and restored my appdata and most docker containers are working as before, however Jackett I cannot add my indexer (hd-torrents.org) I use Sonarr, Jackett, Transmission in my setup. When I add HDT and enter my username password then click OK I get an SSL failure as seen in the attached capture. I can see the certificate has expired butI find it confusing that this certificate error occurs, and where this failure is caused as it only seems to affect Jackett. I felt it might be my browser or something local to the PC I was using so tried other laptops and its the same error. So, I'm pretty confused and am hoping someone can help me. I think I need to somehow renew the certificates on my Unraid server. Thank you in advance. This is the log - https://pastebin.com/HpFjmmw5 Quote Link to comment
BillClinton Posted September 3, 2019 Share Posted September 3, 2019 HI All, I have an issue with Jackett, I just did a cache disk swap and restored my appdata and most docker containers are working as before, however Jackett I cannot add my indexer (hd-torrents.org) I use Sonarr, Jackett, Transmission in my setup. When I add HDT and enter my username password then click OK I get an SSL failure as seen in the attached capture. I can see the certificate has expired butI find it confusing that this certificate error occurs, and where this failure is caused as it only seems to affect Jackett. I felt it might be my browser or something local to the PC I was using so tried other laptops and its the same error. So, I'm pretty confused and am hoping someone can help me. I think I need to somehow renew the certificates on my Unraid server. Thank you in advance. This is the log - https://pastebin.com/HpFjmmw5It might be Telstra blocking that website. I know Australia has cracked down on torrent sites. Have you tried connecting to hd-torrents via your browser?Only solution is either to find another torrent site, or switch internet providers, or set up a vpn. Quote Link to comment
shimee Posted September 4, 2019 Share Posted September 4, 2019 59 minutes ago, BillClinton said: It might be Telstra blocking that website. I know Australia has cracked down on torrent sites. Have you tried connecting to hd-torrents via your browser? Only solution is either to find another torrent site, or switch internet providers, or set up a vpn. Thanks for this. Well yes I do connect to it via my browser pretty much daily, and especially now my automation is broken. It seems odd how it coincided directly to my backup/restore of app data. Currently I'm using a Chrome addon on my main PC to send torrents from HD-Torrents site to Transmission on Unraid. Same command as shown in screenshot below from my PC on the same network is successful. SO I think its Unraid server issue? Quote Link to comment
BillClinton Posted September 4, 2019 Share Posted September 4, 2019 Thanks for this. Well yes I do connect to it via my browser pretty much daily, and especially now my automation is broken. It seems odd how it coincided directly to my backup/restore of app data. Currently I'm using a Chrome addon on my main PC to send torrents from HD-Torrents site to Transmission on Unraid. Same command as shown in screenshot below from my PC on the same network is successful. SO I think its Unraid server issue? Only other thing I can think of is the certificate in Jacketts app data is old or balked. See if you can flush the old one. Quote Link to comment
shimee Posted September 4, 2019 Share Posted September 4, 2019 2 minutes ago, BillClinton said: Only other thing I can think of is the certificate in Jacketts app data is old or balked. See if you can flush the old one. Yeah Im just trying to replapce the ca-cert.crt bundle in /usr/share/curl . That seems to be the path set when using the command to verify the SSL connection to the site, and the cert is clearly expired. IN other words, Im winging it! Thank you for your replies too. Quote Link to comment
turnipisum Posted September 23, 2019 Share Posted September 23, 2019 (edited) I'm getting high cpu usage 13% - 18% any fix for this? Jacket has proxy set up via PIA socks 5. seen posts on other jacket dockers having high cpu issues with socks 5 but not finding any solution other than restart solves issue for a little while. Edited September 23, 2019 by turnipisum Quote Link to comment
turnipisum Posted November 7, 2019 Share Posted November 7, 2019 (edited) On 9/23/2019 at 6:30 PM, turnipisum said: I'm getting high cpu usage 13% - 18% any fix for this? Jacket has proxy set up via PIA socks 5. seen posts on other jacket dockers having high cpu issues with socks 5 but not finding any solution other than restart solves issue for a little while. Nobody else getting this? If i leave it a couple days without restarting container it's eating 50% - 70% of CPU! skynet-ur-diagnostics-20191105-0928.zip Edited November 7, 2019 by turnipisum Quote Link to comment
turnipisum Posted November 14, 2019 Share Posted November 14, 2019 Ok the only way to solve my issue is to delete the container and not use it. Quote Link to comment
tmchow Posted February 20, 2020 Share Posted February 20, 2020 I got this installed and container is running. Logs say nothing is wrong. however, when i try to hit the web dashboard, I get chrome error saying "too many redirects" and it doesn't load. Manually hitting http://192.168.1.161:9117/UI/Dashboard doesn't work, it redirects me to http://192.168.1.161:9117/UI/Login?ReturnUrl=%2FUI%2FDashboard. Any ideas? Quote Link to comment
dewlite Posted February 21, 2020 Share Posted February 21, 2020 18 hours ago, tmchow said: I got this installed and container is running. Logs say nothing is wrong. however, when i try to hit the web dashboard, I get chrome error saying "too many redirects" and it doesn't load. Manually hitting http://192.168.1.161:9117/UI/Dashboard doesn't work, it redirects me to http://192.168.1.161:9117/UI/Login?ReturnUrl=%2FUI%2FDashboard. Any ideas? Same for me, cant figure it out. Worked previously. Quote Link to comment
twisteddemon Posted March 3, 2020 Share Posted March 3, 2020 I have jackett, radarr and sonarr working atm, but one thing i've noticed is jackett seems to be getting updates daily, is this normal? or do i have a balked install? daily updates 3 weeks in a row seems excessive unless its still Beta? (I haven't actually checked sorry) Quote Link to comment
pepsidrinker916 Posted March 27, 2020 Share Posted March 27, 2020 Help... Problem with Jackett Version 0.14.299.0. (Linuxserver.io version:- v0.14.299-ls59 Build-date:- 2020-03-27T05:07:26-04:00) An error occured while testing this indexer Exception (torrentday): The best overloaded method match for 'Jackett.Common.Models.TorznabQuery.MatchQueryStringAND(string, int?, string)' has some invalid arguments: Parse error Quote Link to comment
twisteddemon Posted March 28, 2020 Share Posted March 28, 2020 9 hours ago, pepsidrinker916 said: Help... Problem with Jackett Version 0.14.299.0. (Linuxserver.io version:- v0.14.299-ls59 Build-date:- 2020-03-27T05:07:26-04:00) An error occured while testing this indexer Exception (torrentday): The best overloaded method match for 'Jackett.Common.Models.TorznabQuery.MatchQueryStringAND(string, int?, string)' has some invalid arguments: Parse error theres a problem with the current version of jackett, i used linuxserver/jackett:v0.14.275-ls58 and its working again Quote Link to comment
Bigpawpaww Posted March 28, 2020 Share Posted March 28, 2020 (edited) 39 minutes ago, twisteddemon said: theres a problem with the current version of jackett, i used linuxserver/jackett:v0.14.275-ls58 and its working again @twisteddemonHow do you change the version of the docker? Im having the same issue. Edited March 28, 2020 by Bigpawpaww Quote Link to comment
DigitalDivide Posted May 23, 2020 Share Posted May 23, 2020 (edited) Is there an update to the docker coming. There was an updatet to Jackett yesterday due to some issues impacting AvistaZ, PrivateHD and CinemaZ indexers. See here https://github.com/Jackett/Jackett/issues/8727 AvistaZ, PrivateHD and CinemaZ are fixed in Jackett v0.16.526 You have to configure the indexers in Jackett again because the PID is now required. Read the notes in the configuration!!! Edit: looks like I may have been asking the same question as above. Edited May 23, 2020 by DigitalDivide Quote Link to comment
DigitalDivide Posted May 24, 2020 Share Posted May 24, 2020 The issue has been resolved. Updated the docker and got it working once I added the PID. They did make a change to Jackett where you have to go into the config and now add in the PID from AvistaZ, PrivateHD and CinemaZ Quote Link to comment
Geekd4d Posted July 17, 2020 Share Posted July 17, 2020 I'm getting 70% cpu usage from jackett on all cores since yesterday. Restarting the container brings them down for a couple hours, then they are right back up there, maxing out temps in my tiny case What logs are needed to see whats going on? Quote Link to comment
nekromantik Posted October 1, 2020 Share Posted October 1, 2020 anything changed? on unraid docker UI it now says not available under version. Quote Link to comment
wgstarks Posted October 1, 2020 Share Posted October 1, 2020 1 minute ago, nekromantik said: anything changed? on unraid docker UI it now says not available under version. do another check for updates and it should get rid of the error. Quote Link to comment
nekromantik Posted October 1, 2020 Share Posted October 1, 2020 1 minute ago, wgstarks said: do another check for updates and it should get rid of the error. thanks Quote Link to comment
Zotarios Posted October 7, 2020 Share Posted October 7, 2020 General question: What time does it take to fetch the update on unraid? I'm "check for update" but it doesn't find it, and your docker is updated. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.