CHBMB Posted August 17, 2017 Share Posted August 17, 2017 My understanding is that the dockers are built once a week from the current check-in of the branch they are following. Never update the app inside a docker, it leads to all sorts of issues [emoji4]You're correct on all counts!Sent from my LG-H815 using Tapatalk Quote Link to comment
xxredxpandaxx Posted August 26, 2017 Share Posted August 26, 2017 radarr is moving my files to the docker image for some reason now. How can I go about fixing this? Quote Link to comment
saarg Posted August 26, 2017 Share Posted August 26, 2017 Just now, xxredxpandaxx said: radarr is moving my files to the docker image for some reason now. How can I go about fixing this? Then you got a volume mapping wrong or didn't specify the correct path in the radarr settings. Quote Link to comment
xxredxpandaxx Posted August 26, 2017 Share Posted August 26, 2017 (edited) 48 minutes ago, saarg said: Then you got a volume mapping wrong or didn't specify the correct path in the radarr settings. What path in radarr do you have to set? I don't remember changing anything in the settings when I first set it up. My paths in the container mappings are correct. Also I have it set up the same way sonarr is and that works fine. Just went through all the settings. Edited August 26, 2017 by xxredxpandaxx Quote Link to comment
saarg Posted August 27, 2017 Share Posted August 27, 2017 9 hours ago, xxredxpandaxx said: What path in radarr do you have to set? I don't remember changing anything in the settings when I first set it up. My paths in the container mappings are correct. Also I have it set up the same way sonarr is and that works fine. Just went through all the settings. I don't know what to set as I have never touched it, but you might get more help posting details and not only that it's not working. If you didn't set any paths, that is probably the problem. 1 Quote Link to comment
jamesp469 Posted August 30, 2017 Share Posted August 30, 2017 Running into a corruption issue after the latest update; this error runs in a continuous loop until I shut down the container. Tried removing the container/image, deleting all config files, and reinstalling, without success. Is this an issue on my end, or is there a fix in the works? [v0.2.0.778] NzbDrone.Core.Datastore.CorruptDatabaseException: Database file: /config/nzbdrone.db is corrupt, restore from backup if available. See: https://github.com/Sonarr/Sonarr/wiki/FAQ#i-am-getting-an-error-database-disk-image-is-malformed ---> System.Data.SQLite.SQLiteException: unable to open database file unable to open database file at System.Data.SQLite.SQLite3.Prepare (System.Data.SQLite.SQLiteConnection cnn, System.String strSql, System.Data.SQLite.SQLiteStatement previous, System.UInt32 timeoutMS, System.String& strRemain) [0x0033c] in <REDACTED>:0 at System.Data.SQLite.SQLiteCommand.BuildNextCommand () [0x000f6] in <REDACTED>:0 at System.Data.SQLite.SQLiteCommand.GetStatement (System.Int32 index) [0x00008] in <REDACTED>:0 at (wrapper remoting-invoke-with-check) System.Data.SQLite.SQLiteCommand:GetStatement (int) at System.Data.SQLite.SQLiteDataReader.NextResult () [0x0011e] in <REDACTED>:0 at System.Data.SQLite.SQLiteDataReader..ctor (System.Data.SQLite.SQLiteCommand cmd, System.Data.CommandBehavior behave) [0x00090] in <REDACTED>:0 at (wrapper remoting-invoke-with-check) System.Data.SQLite.SQLiteDataReader:.ctor (System.Data.SQLite.SQLiteCommand,System.Data.CommandBehavior) at System.Data.SQLite.SQLiteCommand.ExecuteReader (System.Data.CommandBehavior behavior) [0x0000c] in <REDACTED>:0 at System.Data.SQLite.SQLiteCommand.ExecuteNonQuery (System.Data.CommandBehavior behavior) [0x00006] in <REDACTED>:0 at System.Data.SQLite.SQLiteCommand.ExecuteNonQuery () [0x00006] in <REDACTED>:0 at System.Data.SQLite.SQLiteConnection.Open () [0x00959] in <REDACTED>:0 at FluentMigrator.Runner.Processors.GenericProcessorBase.EnsureConnectionIsOpen () [0x0000e] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\Processors\GenericProcessorBase.cs:54 at FluentMigrator.Runner.Processors.SQLite.SQLiteProcessor.Exists (System.String template, System.Object[] args) [0x00000] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\Processors\SQLite\SQLiteProcessor.cs:78 at FluentMigrator.Runner.Processors.SQLite.SQLiteProcessor.TableExists (System.String schemaName, System.String tableName) [0x00000] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\Processors\SQLite\SQLiteProcessor.cs:47 at FluentMigrator.Runner.VersionLoader.get_AlreadyCreatedVersionTable () [0x00000] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\VersionLoader.cs:124 at FluentMigrator.Runner.VersionLoader.LoadVersionInfo () [0x00028] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\VersionLoader.cs:160 at FluentMigrator.Runner.VersionLoader..ctor (FluentMigrator.Runner.IMigrationRunner runner, FluentMigrator.Infrastructure.IAssemblyCollection assemblies, FluentMigrator.IMigrationConventions conventions) [0x00077] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\VersionLoader.cs:50 at FluentMigrator.Runner.MigrationRunner..ctor (FluentMigrator.Infrastructure.IAssemblyCollection assemblies, FluentMigrator.Runner.Initialization.IRunnerContext runnerContext, FluentMigrator.IMigrationProcessor processor) [0x00167] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\MigrationRunner.cs:102 at FluentMigrator.Runner.MigrationRunner..ctor (System.Reflection.Assembly assembly, FluentMigrator.Runner.Initialization.IRunnerContext runnerContext, FluentMigrator.IMigrationProcessor processor) [0x00000] in C:\Users\Mark\Source\Repos\fluentmigrator\src\FluentMigrator.Runner\MigrationRunner.cs:72 at NzbDrone.Core.Datastore.Migration.Framework.MigrationController.Migrate (System.String connectionString, NzbDrone.Core.Datastore.Migration.Framework.MigrationContext migrationContext) [0x000b5] in C:\projects\radarr-usby1\src\NzbDrone.Core\Datastore\Migration\Framework\MigrationController.cs:58 at NzbDrone.Core.Datastore.DbFactory.Create (NzbDrone.Core.Datastore.Migration.Framework.MigrationContext migrationContext) [0x00048] in C:\projects\radarr-usby1\src\NzbDrone.Core\Datastore\DbFactory.cs:84 --- End of inner exception stack trace --- at NzbDrone.Core.Datastore.DbFactory.Create (NzbDrone.Core.Datastore.Migration.Framework.MigrationContext migrationContext) [0x00121] in C:\projects\radarr-usby1\src\NzbDrone.Core\Datastore\DbFactory.cs:116 at NzbDrone.Core.Datastore.DbFactory.Create (NzbDrone.Core.Datastore.Migration.Framework.MigrationType migrationType) [0x00000] in C:\projects\radarr-usby1\src\NzbDrone.Core\Datastore\DbFactory.cs:56 at NzbDrone.Core.Datastore.DbFactory.RegisterDatabase (NzbDrone.Common.Composition.IContainer container) [0x00000] in C:\projects\radarr-usby1\src\NzbDrone.Core\Datastore\DbFactory.cs:36 at Radarr.Host.Bootstrap.Start (Radarr.Host.ApplicationModes applicationModes, NzbDrone.Common.EnvironmentInfo.StartupContext startupContext) [0x0003d] in C:\projects\radarr-usby1\src\NzbDrone.Host\Bootstrap.cs:73 at Radarr.Host.Bootstrap.Start (NzbDrone.Common.EnvironmentInfo.StartupContext startupContext, Radarr.Host.IUserAlert userAlert, System.Action`1[T] startCallback) [0x00075] in C:\projects\radarr-usby1\src\NzbDrone.Host\Bootstrap.cs:40 at NzbDrone.Console.ConsoleApp.Main (System.String[] args) [0x0000e] in C:\projects\radarr-usby1\src\NzbDrone.Console\ConsoleApp.cs:20 17-8-29 21:38:07.7|Info|Bootstrap|Starting Radarr - /opt/radarr/Radarr.exe - Version 0.2.0.778 17-8-29 21:38:08.1|Info|AppFolderInfo|Data directory is being overridden to [/config] 17-8-29 21:38:09.5|Info|MigrationLogger|*** Migrating data source=/config/nzbdrone.db;cache size=-10485760;datetimekind=Utc;journal mode=Wal;pooling=True;version=3 *** 17-8-29 21:38:09.6|Fatal|ConsoleApp|EPIC FAIL! Quote Link to comment
kri kri Posted August 30, 2017 Share Posted August 30, 2017 Did you update via the program or let the docker update? Quote Link to comment
CHBMB Posted August 30, 2017 Share Posted August 30, 2017 @jamesp469 Can you post a screenshot of your docker template setup? Quote Link to comment
SM411 Posted August 31, 2017 Share Posted August 31, 2017 I'm quite new to running software in Docker. How is the update process when a new update to the software is released? Should I wait until the Docker is updated or use the automatic updateing feature in Radarr? Quote Link to comment
Squid Posted August 31, 2017 Share Posted August 31, 2017 2 hours ago, SM411 said: I'm quite new to running software in Docker. How is the update process when a new update to the software is released? Should I wait until the Docker is updated or use the automatic updateing feature in Radarr? LSIO issues updates to their containers every Friday which will pull the latest and the greatest version of the app itself. Just update the container via the docker tab every Friday (or install the autoupdate plugin to do it for you). Not generally recommended to update within the app itself for LSIO containers. Quote Link to comment
jamesp469 Posted September 1, 2017 Share Posted September 1, 2017 On 8/30/2017 at 0:21 PM, ice pube said: Did you update via the program or let the docker update? I updated the docker in the unraid GUI. Quote Link to comment
jamesp469 Posted September 1, 2017 Share Posted September 1, 2017 On 8/30/2017 at 1:46 PM, CHBMB said: @jamesp469 Can you post a screenshot of your docker template setup? Quote Link to comment
CHBMB Posted September 1, 2017 Share Posted September 1, 2017 What's in the advanced settings bit? Quote Link to comment
jamesp469 Posted September 1, 2017 Share Posted September 1, 2017 1 hour ago, CHBMB said: What's in the advanced settings bit? Just the config path, which is "/mnt/user/appdata/radarr" Quote Link to comment
CHBMB Posted September 1, 2017 Share Posted September 1, 2017 Delete the contents of /mnt/user/appdata/radarr/ Remove the docker image and container, then reinstall. If that doesn't give you a clean slate then do it again, but change /mnt/user/appdata/radarr/ to /mnt/cache/appdata/radarr/ Quote Link to comment
jamesp469 Posted September 2, 2017 Share Posted September 2, 2017 (edited) 35 minutes ago, CHBMB said: Delete the contents of /mnt/user/appdata/radarr/ Remove the docker image and container, then reinstall. If that doesn't give you a clean slate then do it again, but change /mnt/user/appdata/radarr/ to /mnt/cache/appdata/radarr/ Thank you! Changing /mnt/user/appdata/radarr/ to /mnt/cache/appdata/radarr/ has appeared to solve the issue. Edit - I did not delete/remove any data Edited September 2, 2017 by jamesp469 update Quote Link to comment
JohanSF Posted October 7, 2017 Share Posted October 7, 2017 (edited) Radarr failing at hardlinking downloaded files: Here is the log showing it: 17-10-7 18:42:19.2|Debug|MovieFileMovingService|Hardlinking movie file: /downloads/completed/Sunshine 2007 1080p BluRay DTS x264-SbR.mkv to /movies/Sunshine (2007)/Sunshine 2007 Bluray-1080p SbR.mkv 17-10-7 18:42:19.2|Debug|DiskTransferService|HardLinkOrCopy [/downloads/completed/Sunshine 2007 1080p BluRay DTS x264-SbR.mkv] > [/movies/Sunshine (2007)/Sunshine 2007 Bluray-1080p SbR.mkv] 17-10-7 18:42:19.2|Debug|DiskProvider|Hardlink '/downloads/completed/Sunshine 2007 1080p BluRay DTS x264-SbR.mkv' to '/movies/Sunshine (2007)/Sunshine 2007 Bluray-1080p SbR.mkv' failed. [v0.2.0.852] Mono.Unix.UnixIOException: Invalid cross-device link [EXDEV]. at Mono.Unix.UnixMarshal.ThrowExceptionForLastError () [0x00005] in <9218863bd76f4aab9e01206e78055285>:0 at Mono.Unix.UnixMarshal.ThrowExceptionForLastErrorIf (System.Int32 retval) [0x00004] in <9218863bd76f4aab9e01206e78055285>:0 at Mono.Unix.UnixFileSystemInfo.CreateLink (System.String path) [0x0000c] in <9218863bd76f4aab9e01206e78055285>:0 at NzbDrone.Mono.Disk.DiskProvider.TryCreateHardLink (System.String source, System.String destination) [0x00000] in C:\projects\radarr-usby1\src\NzbDrone.Mono\Disk\DiskProvider.cs:160 The setup is so that downloaded files and the movies folder are on the same user share, i.e. "media/downloads/completed" and "media/movies/" If I do it manually on the same file, with the ln command it works perfectly fine. There is no problem in creating the hardlink that Radarr is supposed to if I just do it manually. So why can I do manually what Radarr cannot? Any help would be much appreciated. Edit: I have noticed that the permissions on a hardlink that I created manually is "- rw-rw-rw-", while the copy that radarr made has "- rw-r-r--". I tried running the "New permissions" script from the Tools section in Unraid, but this did not fix the issue. I am however still unsure if this might have something to do with permissions. I have the same issue with Sonarr. I SOLVED IT: Apparantly, Radarr and RuTorrent need to refer to the same root folder. Radarr cares about this because of the setting at the downloader setting that tells it to use the torrent downloaders default location. So in Rutorrent I set the download folders (incoming, completed and watched) to start with /media/downloads/ and I point Radarr to store movies in /media/movies/. The same applies for Sonarr. Edited October 8, 2017 by JohanSF Quote Link to comment
Ockingshay Posted October 7, 2017 Share Posted October 7, 2017 Without going through all the setup if not worth it, is this an improvement on CPS? Quote Link to comment
LSL1337 Posted October 12, 2017 Share Posted October 12, 2017 so, something weired happened, I'm not sure they are connected. Yesterday I noticed there is a new release for radarr, And I went and checked my docker, System/updates, but it didn't show anything there, the page wouldn't load. I pressed restart on the system page, and still nothing showed up, but radarr was working. hmm, though nothing of it. Today I can see, that the mono process is 100% hammering my CPU (on 1 thread), since last night, around the time, I checked the update page and restarted radarr (not the docer) so now I restarted the docker itself, mono cpu load went back to normal. Still the updates page didn't load, after radarr restart, the cpu is 100%. So, Should I not use the restart button in radarr while I'm running it in docker? Or is this a bug, and related to the not loading updates page. Is the updates page loading for you guys? I get error in the logs :"Request Failed: Sequence contains more than one matching element" Even at 100% cpu, the app still works. thanks! Quote Link to comment
Endda Posted October 15, 2017 Share Posted October 15, 2017 I'm seeing this error in the Radarr logs lately (looping every 10ish minutes or so). I don't know if it's something specific to this docker image, or radarr itself Quote SignalR exception thrown by Task: System.AggregateException: One or more errors occurred. ---> System.ObjectDisposedException: Cannot access a disposed object. Object name: 'Microsoft.Owin.Host.HttpListener.RequestProcessing.OwinHttpListenerResponse'. at Microsoft.Owin.Host.HttpListener.RequestProcessing.OwinHttpListenerResponse.ResponseBodyStarted () [0x0001a] in <208c8ef8a4ba4b878f0e4420d5960bea>:0 at Microsoft.Owin.Host.HttpListener.RequestProcessing.OwinHttpListenerResponse.OnResponseBodyStarted (System.Object state) [0x00007] in <208c8ef8a4ba4b878f0e4420d5960bea>:0 at Microsoft.Owin.Host.HttpListener.RequestProcessing.ExceptionFilterStream+OneTimeCallback.TryInvoke () [0x00019] in <208c8ef8a4ba4b878f0e4420d5960bea>:0 at Microsoft.Owin.Host.HttpListener.RequestProcessing.ExceptionFilterStream.FirstWrite () [0x00000] in <208c8ef8a4ba4b878f0e4420d5960bea>:0 at Microsoft.Owin.Host.HttpListener.RequestProcessing.ExceptionFilterStream.Write (System.Byte[] buffer, System.Int32 offset, System.Int32 count) [0x00024] in <208c8ef8a4ba4b878f0e4420d5960bea>:0 at Microsoft.AspNet.SignalR.Owin.ServerResponse.Write (System.ArraySegment`1[T] data) [0x00000] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Owin\ServerResponse.cs:50 at Microsoft.AspNet.SignalR.Infrastructure.BinaryTextWriter+<>c.<.ctor>b__0_0 (System.ArraySegment`1[T] data, System.Object state) [0x00000] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Infrastructure\BinaryTextWriter.cs:12 at Microsoft.AspNet.SignalR.Infrastructure.BufferTextWriter+ChunkedWriter.Flush (System.Byte[] byteBuffer, System.Boolean flushEncoder) [0x00027] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Infrastructure\BufferTextWriter.cs:182 at Microsoft.AspNet.SignalR.Infrastructure.BufferTextWriter+ChunkedWriter.Flush (System.Boolean flushEncoder) [0x00008] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Infrastructure\BufferTextWriter.cs:163 at Microsoft.AspNet.SignalR.Infrastructure.BufferTextWriter+ChunkedWriter.Flush () [0x00000] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Infrastructure\BufferTextWriter.cs:155 at Microsoft.AspNet.SignalR.Infrastructure.BufferTextWriter+ChunkedWriter.Write (System.ArraySegment`1[T] data) [0x00000] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Infrastructure\BufferTextWriter.cs:149 at Microsoft.AspNet.SignalR.Infrastructure.BinaryTextWriter.Write (System.ArraySegment`1[T] data) [0x00000] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Infrastructure\BinaryTextWriter.cs:31 at Microsoft.AspNet.SignalR.Transports.PersistentResponse.WriteMessages (System.IO.TextWriter writer, Newtonsoft.Json.JsonTextWriter jsonWriter) [0x00063] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Transports\PersistentResponse.cs:167 at Microsoft.AspNet.SignalR.Transports.PersistentResponse.Microsoft.AspNet.SignalR.Json.IJsonWritable.WriteJson (System.IO.TextWriter writer) [0x000f5] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Transports\PersistentResponse.cs:131 at Microsoft.AspNet.SignalR.Json.JsonNetSerializer.Serialize (System.Object value, System.IO.TextWriter writer) [0x0000a] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Json\JsonNetSerializer.cs:61 at NzbDrone.SignalR.Serializer.Serialize (System.Object value, System.IO.TextWriter writer) [0x0001f] in C:\projects\radarr-usby1\src\NzbDrone.SignalR\Serializer.cs:20 at Microsoft.AspNet.SignalR.Transports.LongPollingTransport.PerformSend (System.Object state) [0x00085] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Transports\LongPollingTransport.cs:315 at Microsoft.AspNet.SignalR.Transports.LongPollingTransport+<>c.<Send>b__43_0 (System.Object state) [0x00000] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Transports\LongPollingTransport.cs:157 at Microsoft.AspNet.SignalR.Infrastructure.TaskQueue.<Enqueue>b__14_0 (System.Func`2[T,TResult] next, System.Object nextState) [0x00000] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Infrastructure\TaskQueue.cs:85 at Microsoft.AspNet.SignalR.TaskAsyncHelper.FromMethod[T1,T2] (System.Func`3[T1,T2,TResult] func, T1 arg1, T2 arg2) [0x00000] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\TaskAsyncHelper.cs:764 --- End of inner exception stack trace --- ---> (Inner Exception #0) System.ObjectDisposedException: Cannot access a disposed object. Object name: 'Microsoft.Owin.Host.HttpListener.RequestProcessing.OwinHttpListenerResponse'. at Microsoft.Owin.Host.HttpListener.RequestProcessing.OwinHttpListenerResponse.ResponseBodyStarted () [0x0001a] in <208c8ef8a4ba4b878f0e4420d5960bea>:0 at Microsoft.Owin.Host.HttpListener.RequestProcessing.OwinHttpListenerResponse.OnResponseBodyStarted (System.Object state) [0x00007] in <208c8ef8a4ba4b878f0e4420d5960bea>:0 at Microsoft.Owin.Host.HttpListener.RequestProcessing.ExceptionFilterStream+OneTimeCallback.TryInvoke () [0x00019] in <208c8ef8a4ba4b878f0e4420d5960bea>:0 at Microsoft.Owin.Host.HttpListener.RequestProcessing.ExceptionFilterStream.FirstWrite () [0x00000] in <208c8ef8a4ba4b878f0e4420d5960bea>:0 at Microsoft.Owin.Host.HttpListener.RequestProcessing.ExceptionFilterStream.Write (System.Byte[] buffer, System.Int32 offset, System.Int32 count) [0x00024] in <208c8ef8a4ba4b878f0e4420d5960bea>:0 at Microsoft.AspNet.SignalR.Owin.ServerResponse.Write (System.ArraySegment`1[T] data) [0x00000] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Owin\ServerResponse.cs:50 at Microsoft.AspNet.SignalR.Infrastructure.BinaryTextWriter+<>c.<.ctor>b__0_0 (System.ArraySegment`1[T] data, System.Object state) [0x00000] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Infrastructure\BinaryTextWriter.cs:12 at Microsoft.AspNet.SignalR.Infrastructure.BufferTextWriter+ChunkedWriter.Flush (System.Byte[] byteBuffer, System.Boolean flushEncoder) [0x00027] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Infrastructure\BufferTextWriter.cs:182 at Microsoft.AspNet.SignalR.Infrastructure.BufferTextWriter+ChunkedWriter.Flush (System.Boolean flushEncoder) [0x00008] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Infrastructure\BufferTextWriter.cs:163 at Microsoft.AspNet.SignalR.Infrastructure.BufferTextWriter+ChunkedWriter.Flush () [0x00000] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Infrastructure\BufferTextWriter.cs:155 at Microsoft.AspNet.SignalR.Infrastructure.BufferTextWriter+ChunkedWriter.Write (System.ArraySegment`1[T] data) [0x00000] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Infrastructure\BufferTextWriter.cs:149 at Microsoft.AspNet.SignalR.Infrastructure.BinaryTextWriter.Write (System.ArraySegment`1[T] data) [0x00000] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Infrastructure\BinaryTextWriter.cs:31 at Microsoft.AspNet.SignalR.Transports.PersistentResponse.WriteMessages (System.IO.TextWriter writer, Newtonsoft.Json.JsonTextWriter jsonWriter) [0x00063] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Transports\PersistentResponse.cs:167 at Microsoft.AspNet.SignalR.Transports.PersistentResponse.Microsoft.AspNet.SignalR.Json.IJsonWritable.WriteJson (System.IO.TextWriter writer) [0x000f5] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Transports\PersistentResponse.cs:131 at Microsoft.AspNet.SignalR.Json.JsonNetSerializer.Serialize (System.Object value, System.IO.TextWriter writer) [0x0000a] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Json\JsonNetSerializer.cs:61 at NzbDrone.SignalR.Serializer.Serialize (System.Object value, System.IO.TextWriter writer) [0x0001f] in C:\projects\radarr-usby1\src\NzbDrone.SignalR\Serializer.cs:20 at Microsoft.AspNet.SignalR.Transports.LongPollingTransport.PerformSend (System.Object state) [0x00085] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Transports\LongPollingTransport.cs:315 at Microsoft.AspNet.SignalR.Transports.LongPollingTransport+<>c.<Send>b__43_0 (System.Object state) [0x00000] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Transports\LongPollingTransport.cs:157 at Microsoft.AspNet.SignalR.Infrastructure.TaskQueue.<Enqueue>b__14_0 (System.Func`2[T,TResult] next, System.Object nextState) [0x00000] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\Infrastructure\TaskQueue.cs:85 at Microsoft.AspNet.SignalR.TaskAsyncHelper.FromMethod[T1,T2] (System.Func`3[T1,T2,TResult] func, T1 arg1, T2 arg2) [0x00000] in C:\projects\radarr-usby1\src\Microsoft.AspNet.SignalR.Core\TaskAsyncHelper.cs:764 <--- Quote Link to comment
pszlaci Posted October 21, 2017 Share Posted October 21, 2017 Hello! I use binhex-radarr docker. How to install older version of docker? Installed version: Radarr Ver. 0.2.0.870 I need: Radarr Ver. 0.2.0.654 Quote Link to comment
saarg Posted October 21, 2017 Share Posted October 21, 2017 2 hours ago, pszlaci said: Hello! I use binhex-radarr docker. How to install older version of docker? Installed version: Radarr Ver. 0.2.0.870 I need: Radarr Ver. 0.2.0.654 First step is to post in the correct support thread Quote Link to comment
arcane Posted October 26, 2017 Share Posted October 26, 2017 I have my movies in multiple folders for organization. Is there a way to specify this within the initial Radarr setup? Quote Link to comment
Squid Posted October 26, 2017 Share Posted October 26, 2017 7 minutes ago, arcane said: I have my movies in multiple folders for organization. Is there a way to specify this within the initial Radarr setup? Are they in multiple shares (/mnt/user/BluRay and /mnt/user/DVD) or multiple folders (eg: /mnt/user/Movies/BluRay and /mnt/user/Movies/DVD)? If the former, add another path mapping to Radarr, and import the movies from that path. If the latter, you may have to specify the subfolder of the share and import the movies from that subfolder, then go on to the next subfolder. Quote Link to comment
arcane Posted October 26, 2017 Share Posted October 26, 2017 29 minutes ago, Squid said: Are they in multiple shares (/mnt/user/BluRay and /mnt/user/DVD) or multiple folders (eg: /mnt/user/Movies/BluRay and /mnt/user/Movies/DVD)? If the former, add another path mapping to Radarr, and import the movies from that path. If the latter, you may have to specify the subfolder of the share and import the movies from that subfolder, then go on to the next subfolder. Thanks for the quick reply! Sorry... yes, they are in multiple shares. What should the initial container path be set up as for the movies when adding the Docker? Thank you. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.