loady Posted May 15, 2018 Share Posted May 15, 2018 23 minutes ago, witalit said: Why are you using Sab and NZBget? Just use NZBget I moved from Sab to this and find it a lot better. Try to use /mnt/user/ Instead of directly to cache. Then set the share to use cache only, this may just make you even more confused though :-). this is how I had sab setup before I added radarr to the mix...worked fine with cp and sonar 1 hour ago, CHBMB said: Also do you really want all your downloads as /mnt/cache/appdata/downloads or did you mean to put /mnt/cache/downloads yes that's what I wanted but wasn't seeing it. Quote Link to comment
loady Posted May 15, 2018 Share Posted May 15, 2018 1 hour ago, CHBMB said: Look at the sabnzbd settings screenshot, you've got the default base folder as /config It needs to be /downloads right...so I can change it from config ?? Quote Link to comment
CHBMB Posted May 15, 2018 Share Posted May 15, 2018 27 minutes ago, loady said: right...so I can change it from config ?? You have to Quote Link to comment
loady Posted May 15, 2018 Share Posted May 15, 2018 6 minutes ago, CHBMB said: You have to hmmmm...see I never changed it prior to using radarr, sab Docker was /mnt/user as op suggested. It worked fine with sab and cp..think this is where all the confusion started when I started using radarr Quote Link to comment
loady Posted May 16, 2018 Share Posted May 16, 2018 (edited) 16 hours ago, CHBMB said: You have to I did, now all its done is set up the sabnzb config files into mnt/user/downloads and sab starts as if it is a new install..thats not right. doing this means I cant have the sab app folder into appdata folder with all my other dockers. Your saying I need to change where the /config folder resides, doing this makes a new sab folder, so basically I cant have sab in /mnt/cache/appdata/sabnzbd if I change config to /mnt/cache/downloads, changing /downloads to /mnt/cache/downloads is not possible as I am stuck in /config which is mapped to /mnt/cache/appdata/sabnzbd Edited May 16, 2018 by loady Quote Link to comment
loady Posted May 16, 2018 Share Posted May 16, 2018 23 hours ago, CHBMB said: Look at the sabnzbd settings screenshot, you've got the default base folder as /config It needs to be /downloads doing this makes a new sabnzb folder in mnt/user/downloads, before it messed it all up my sab docker was at mnt/user/appdata and appdata folder was set to cache only, downloads were set in sab to goto mnt/user/downloads/incomplete and moved to mnt/downloads/completed. Now I cant get it back to how was Quote Link to comment
loady Posted May 17, 2018 Share Posted May 17, 2018 Im sure you are all fed up with my not understanding. i found i a video guide that showed me what to do and now i can see where i wasnt understanding. Quote Link to comment
loady Posted May 17, 2018 Share Posted May 17, 2018 (edited) im now bulk importing movies, my movies share has different folders for different categories, ie, family, my movies, couch potato etc..do i need to add each folder ?...i have about 300 movies within these folders collectively, does this take a long time ? will it laso search sub directories Edited May 17, 2018 by loady Quote Link to comment
witalit Posted May 18, 2018 Share Posted May 18, 2018 Loady you have fully spammed this thread ? Quote Link to comment
nas_nerd Posted May 20, 2018 Share Posted May 20, 2018 Hi all, I can't get Radarr to rename my movie folders to the format I have specified in the settings. Not sure if it is a settings thing or maybe a permission problem with the docker? I've attached pics of my Radarr settings and how the folders actually get renamed. The video files themselves rename correctly. Any ideas what I am doing wrong? Quote Link to comment
tucansam Posted May 21, 2018 Share Posted May 21, 2018 When I rip a DVD or bluray from my collection to the server, what exactly do I have to put in the filename to get Radarr to understand that its a quality copy?! I have several 30GB+ bluray files called "title00.mkv" and radarr downloads 720p and 1080p versions of the exact same movie into the same directory, so now I have two or three movies files, including the super-high-quality original from the rip. Radarr doesn't seem to be very smart with regard to existing movies burned from media. Quote Link to comment
saarg Posted May 21, 2018 Share Posted May 21, 2018 5 hours ago, tucansam said: When I rip a DVD or bluray from my collection to the server, what exactly do I have to put in the filename to get Radarr to understand that its a quality copy?! I have several 30GB+ bluray files called "title00.mkv" and radarr downloads 720p and 1080p versions of the exact same movie into the same directory, so now I have two or three movies files, including the super-high-quality original from the rip. Radarr doesn't seem to be very smart with regard to existing movies burned from media. http://bfy.tw/IEBH Quote Link to comment
tucansam Posted May 21, 2018 Share Posted May 21, 2018 Naming Schemes A good allround naming scheme, that works for Radarr/Sonarr (on bulk import), Plex and most of the stuff build on guessit. Also added is a naming scheme for Sonarr. If other people have come up with a better solution, please add them. {Movie Title} ({Release Year}) - {[EDITION TAGS]}{[QUALITY FULL]}{[MEDIAINFO AUDIOCODEC}{ MEDIAINFO AUDIOCHANNELS]}{[MEDIAINFO VIDEOCODEC]}{-RELEASE GROUP} The Movie Title (2010) - [ULTIMATE EXTENDED EDITION][BLURAY-1080P PROPER][DTS 5.1][X264]-EVOLVE {Series Title} - S{season:00}E{episode:00} - {[QUALITY FULL]}{[MEDIAINFO AUDIOCODEC}{ MEDIAINFO AUDIOCHANNELS]}{[MEDIAINFO VIDEOCODEC]}{-RELEASE GROUP} The Series Title 2010 - S01E01 - [HDTV-720P PROPER][DTS 5.1][X264]-RLSGRP Quote Link to comment
Unlime Posted May 22, 2018 Share Posted May 22, 2018 ive been using couchpotato, but wanna give radarr a try. The movies has been downloaded to my cache disk, and moved with couchpotato to my "movie" disk when its finished. How can i do this with radarr? Quote Link to comment
loady Posted May 22, 2018 Share Posted May 22, 2018 4 hours ago, Unlime said: On 5/18/2018 at 12:49 PM, witalit said: Loady you have fully spammed this thread ? Yes I totally did, it took all my hair...let me give something back..... 4 hours ago, Unlime said: ive been using couchpotato, but wanna give radarr a try. The movies has been downloaded to my cache disk, and moved with couchpotato to my "movie" disk when its finished. How can i do this with radarr? basically in the docker template, where it asks for the path to media or data, put in the path to your movies, for me it is /mnt/user/movies, I also added a category in sabnzbd called movies so that they get put into that folder within /mnt/user/movies so I know that was scraped via radar. So in docker template on CP, it says /movies and I have the path set as /mnt/user/movies (for me) and in radar docker template it says /media and I have that mapped to the same location /mnt/user/movies Quote Link to comment
loady Posted May 22, 2018 Share Posted May 22, 2018 Now I have this working, I'm not wholly convinced its any better than CP, I have found that media management is somewhat scratchy, I can browse to my films folder but it doesn't show all the films in my library, I thought maybe it is not seeing into the subdirectories, its seems to sit on updating library for a long time, it only ever shows 69 records. If I just add the movies folder as my media it sees the subdirectories folders as films and tries to match them, I have also tried adding each sub directories one by one but it seems to only see into one folder at any time, hence only picking up a few records. Quote Link to comment
Unlime Posted May 24, 2018 Share Posted May 24, 2018 On 5/22/2018 at 5:26 PM, loady said: Yes I totally did, it took all my hair...let me give something back..... basically in the docker template, where it asks for the path to media or data, put in the path to your movies, for me it is /mnt/user/movies, I also added a category in sabnzbd called movies so that they get put into that folder within /mnt/user/movies so I know that was scraped via radar. So in docker template on CP, it says /movies and I have the path set as /mnt/user/movies (for me) and in radar docker template it says /media and I have that mapped to the same location /mnt/user/movies Thank you Quote Link to comment
nas_nerd Posted May 27, 2018 Share Posted May 27, 2018 On 5/20/2018 at 6:14 PM, nas_nerd said: Hi all, I can't get Radarr to rename my movie folders to the format I have specified in the settings. Not sure if it is a settings thing or maybe a permission problem with the docker? I've attached pics of my Radarr settings and how the folders actually get renamed. The video files themselves rename correctly. Any ideas what I am doing wrong? Anyone? Do most people set permissions using this setting in Radarr? Quote Link to comment
loady Posted May 28, 2018 Share Posted May 28, 2018 22 hours ago, nas_nerd said: Anyone? Do most people set permissions using this setting in Radarr? I dont have permissions set on mine, post up a log for one of the other guys to look at. What is radarr doing if its not renaming them how you want ? Quote Link to comment
Greygoose Posted May 28, 2018 Share Posted May 28, 2018 (edited) I have radarr working great, it renames and places movie "backups" into my movie folder. it renames and does what i want. however, i have this error in the image attached, the only way to remove the error is change the path in the docker config and change the dir in the ADD MOVIE section, but then it wont rename and move the movie correctly. is there still something wrong, or can i remove this error report? Edited May 28, 2018 by Greygoose added docker image Quote Link to comment
tucansam Posted May 30, 2018 Share Posted May 30, 2018 Deleted the docker image. Done with this app completely. Didn't work right from day one. Came home today to dozens of "movie.1" "movie.2" "movie.3" folders. All the same. Haven't touched the config or server in over a month. Suddenly decided it wanted to dupe dozens of movies. Quote Link to comment
Uc2983 Posted June 3, 2018 Share Posted June 3, 2018 I'm really new to all this, but I've set up the docker, but appear to have a weird quirk. /downloads is mapped to my /downloads share, which i have a deluge docker also moving things to. /movies is mapped to /media/movies share. Now, in my prior workflow, deluge moved completed downloads to /media/movies. However, I stopped that behavior assuming that Radarr would take care of that- instead, Radar tells me 'cannot find file to import.'. If invoke the transfer in deluge, moving the completed file to /media/movies, then Radarr finds it- but also immediately copies out the movie file to a new folder and file in it's prefered naming structure. This is despite the fact i have turned off rename and copy, have it set to use hard links.. What am i missing here? is there a way to tell it to look for the completed file in /downloads instead of /movies which is where it's apparently looking? a way to disable the copying feature? I get the feeling i'm just missing something stupidly obvious but even with advanved settings being shown i don't see anything that appears to relate to 'search X folder', and i already have the copy/rename feature off yet it still does so.. Quote Link to comment
Squid Posted June 3, 2018 Share Posted June 3, 2018 19 minutes ago, Uc2983 said: Radar tells me 'cannot find file to import.'. https://lime-technology.com/forums/topic/57181-real-docker-faq/?page=2#comment-566086 Quote Link to comment
Uc2983 Posted June 3, 2018 Share Posted June 3, 2018 Thanks, That felt.. really obvious in retrospect. Missed that within deluge the path is /data not /downloads. Quote Link to comment
steve1977 Posted June 16, 2018 Share Posted June 16, 2018 Weird issue. Docker doesn't auto-start (despite of being set as "auto-start"). When manually starting it, all works. Error in log as below. Any thoughts? [v0.2.0.1120] System.Net.WebException: Error getting response stream (ReadAsync): ReceiveFailure Value cannot be null. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.