Zonediver Posted January 14, 2018 Share Posted January 14, 2018 (edited) 4 minutes ago, wgstarks said: Probably not a fix, but I know Server Layout is not compatible with 6.4 unless you have made the mods described in that thread. What changes are this? Server Layout and Unassigned Dev. are not working. Edited January 14, 2018 by Zonediver Link to comment
Hoopster Posted January 14, 2018 Share Posted January 14, 2018 8 minutes ago, Living Legend said: I have since removed nearly ever Plugin that's not CA or Dymanix. The only other ones I run are quite popular ones: Unassigned Devices Fix Common Problems Nerd Tools Preclear Disks Recycle Bin Server Layout User Scripts I have all of those plugins (other than server layout) running without issue on my two servers both of which were upgraded today to 6.4.0. Unless there is an issue with the server layout plugin, I don't think plugins is the source of your problem. My backup server had been running all the RCs as well with lots of plugins without issue. Link to comment
Squid Posted January 14, 2018 Share Posted January 14, 2018 (edited) 2 minutes ago, Zonediver said: Server Layout Patch detailed on the last page of its thread. 2 minutes ago, Zonediver said: Unassigned Dev. Should work perfectly, unless you're using it for SMB remote mounts in which case you *may* have to force v1 SMB mounts via its settings Edited January 14, 2018 by Squid Link to comment
Zonediver Posted January 14, 2018 Share Posted January 14, 2018 1 minute ago, Squid said: Patch detailed on the last page of the thread by me. Should work perfectly, unless you're using it for SMB remote mounts in which case you *may* have to force v1 SMB mounts via its settings UD is not longer shown on the Main page - is this normal? Is it somewere else now? Link to comment
Squid Posted January 14, 2018 Share Posted January 14, 2018 3 minutes ago, Zonediver said: UD is not longer shown on the Main page - is this normal? Is it somewere else now? No. But without diagnostics can't really tell what's going on. Link to comment
1812 Posted January 14, 2018 Share Posted January 14, 2018 upgraded a dl120 and z400 without issues from the RC. Will update the dl580 tomorrow from RC but expect no issues either. 3 minutes ago, Zonediver said: UD is not longer shown on the Main page - is this normal? Is it somewere else now? Not normal, it's suppose to be where it always has been. Link to comment
Hoopster Posted January 14, 2018 Share Posted January 14, 2018 6 minutes ago, Zonediver said: Server Layout and Unassigned Dev. are not working. Unassigned Devices is working perfectly for me. I have an SSD mounted via UD which hosts two VMs and they are working fine. UD still shows on the main page, same as always, for me I don't know what the solution to your issue may be, but, I don't see either of your problems with UD. Link to comment
Zonediver Posted January 14, 2018 Share Posted January 14, 2018 (edited) 2 minutes ago, Squid said: No. But without diagnostics can't really tell what's going on. I did a second reboot and now, its there... lol??? Need this update more then one reboot? Edited January 14, 2018 by Zonediver Link to comment
Squid Posted January 14, 2018 Share Posted January 14, 2018 19 minutes ago, Living Legend said: constant hard crash? Possibly related? Jan 12 00:00:01 unraid root: >f+++++++++ downloads/tv/The.Amazing.Race.S30E02.720p.HDTV.x264-BAJSKORV[ettv]/The.Amazing.Race.S30E02.720p.HDTV.x264-BAJSKORV[ettv].mkv Jan 12 00:00:03 unraid kernel: sd 1:0:6:0: [sdh] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 Jan 12 00:00:03 unraid kernel: sd 1:0:6:0: [sdh] tag#0 Sense Key : 0x5 [current] Jan 12 00:00:03 unraid kernel: sd 1:0:6:0: [sdh] tag#0 ASC=0x21 ASCQ=0x0 Jan 12 00:00:03 unraid kernel: sd 1:0:6:0: [sdh] tag#0 CDB: opcode=0x42 42 00 00 00 00 00 00 00 18 00 Jan 12 00:00:03 unraid kernel: blk_update_request: critical target error, dev sdh, sector 124935904 Its a read error on a disk. But it's a real pain to read the syslog with all of the impi connection timeouts included, and the mover logging everything it's doing (disable mover logging), not to mention that the syslog rotated enough times that the beginning isn't included in the diagnostics now (due to the timeouts and mover logging) Link to comment
1812 Posted January 14, 2018 Share Posted January 14, 2018 10 minutes ago, Squid said: Possibly related? It's a horrible show, so I wouldn't be surprised that it is causing constant server crashes... ¯\_(ツ)_/¯ Link to comment
cybrnook Posted January 14, 2018 Share Posted January 14, 2018 Small graphical anomalies with the new "Azure" theme (Dashboard): Link to comment
Zonediver Posted January 14, 2018 Share Posted January 14, 2018 (edited) 27 minutes ago, Squid said: Patch detailed on the last page of its thread. Found it and implemented it in the go file - shall i reboot the server again, because its not working? Edited January 14, 2018 by Zonediver Link to comment
Squid Posted January 14, 2018 Share Posted January 14, 2018 10 minutes ago, Zonediver said: Found it and implemented it in the go file - shall i reboot the server again, because its not working? Only ever takes effect when run. So, yes.... Link to comment
Zonediver Posted January 14, 2018 Share Posted January 14, 2018 Just now, Squid said: Only ever takes effect when run. So, yes.... Thanks Link to comment
BobPhoenix Posted January 14, 2018 Share Posted January 14, 2018 (edited) Can we get the "Table view spacing" capabilities back in the 6.4 GUI. As you can see from the attached graphics there is much greater space between drives in 6.4 compared to 6.3.5. Edited January 14, 2018 by BobPhoenix Link to comment
CorneliousJD Posted January 14, 2018 Share Posted January 14, 2018 Here to report the issue under known issues. If you want this reported elsewhere just let me know - and if I can provide any additional logs, etc, I would be happy to. Jan 13 17:23:05 Server kernel: vmwrite error: reg 810 value 0 (err 0)Jan 13 17:23:05 Server kernel: CPU: 24 PID: 9174 Comm: CPU 0/KVM Tainted: G W 4.14.13-unRAID #1Jan 13 17:23:05 Server kernel: Hardware name: Supermicro PIO-617R-TLN4F+-ST031/X9DRi-LN4+/X9DR3-LN4+, BIOS 3.2 03/04/2015Jan 13 17:23:05 Server kernel: Call Trace:Jan 13 17:23:05 Server kernel: dump_stack+0x5d/0x79Jan 13 17:23:05 Server kernel: kvm_lapic_reset+0x278/0x292 [kvm]Jan 13 17:23:05 Server kernel: kvm_create_lapic+0xa5/0xb2 [kvm]Jan 13 17:23:05 Server kernel: kvm_arch_vcpu_init+0xd9/0x22d [kvm]Jan 13 17:23:05 Server kernel: kvm_vcpu_init+0xcd/0xee [kvm]Jan 13 17:23:05 Server kernel: vmx_create_vcpu+0x54/0xd5c [kvm_intel]Jan 13 17:23:05 Server kernel: kvm_vm_ioctl+0x13b/0x66c [kvm]Jan 13 17:23:05 Server kernel: ? free_one_page+0xbe/0x271Jan 13 17:23:05 Server kernel: vfs_ioctl+0x16/0x23Jan 13 17:23:05 Server kernel: do_vfs_ioctl+0x4f1/0x504Jan 13 17:23:05 Server kernel: SyS_ioctl+0x39/0x55Jan 13 17:23:05 Server kernel: entry_SYSCALL_64_fastpath+0x1e/0x81Jan 13 17:23:05 Server kernel: RIP: 0033:0x146bdafe1727 server-diagnostics-20180113-1725.zip Link to comment
01111000 Posted January 14, 2018 Share Posted January 14, 2018 Having a few issues, and my log file is from 6.3.5. First off, the after downloading the upgrade, I was unable to reboot or shutdown the server via the webgui. It went through the motions as if it was shutting down but it remained in the Array Offline state. I ended up restarting the server via IPMI which worked. After it came up as 6.4, it was stuck on Starting Services on the bottom left. I left it running for at least 30 minutes and the status never updated. My docker containers were running as if the array was fully functional. I ended up hitting Shutdown via the webgui and was stuck once again, so I rebooted via IPMI. On the next reboot, I was stuck on Mounting disks (for over 30 minutes) and I hit shutdown via the webgui. I am now stuck once again, here's what I see via IPMI. The most recent log on the Server was from 6.3.5 and it has not saved any new logs since the upgrade. How should I proceed? server-diagnostics-20180113-1956.zip Link to comment
Zonediver Posted January 14, 2018 Share Posted January 14, 2018 (edited) Found also an issue with the new interface - its a gray transparent area with a green bar. Edited January 14, 2018 by Zonediver Link to comment
Hoopster Posted January 14, 2018 Share Posted January 14, 2018 (edited) 7 minutes ago, Zonediver said: Found also an issue with the new interface - its a gray transparent area with a green bar. That's the array disk usage indicator. It should have a percentage used number in the gray area. Mine shows 31% under the green bar. Check your display settings and try toggling the "show array utilization indicator" setting to see if it changes. Edited January 14, 2018 by Hoopster 1 Link to comment
Zonediver Posted January 14, 2018 Share Posted January 14, 2018 (edited) 12 minutes ago, Hoopster said: That's the array disk usage indicator. It should have a percentage used number in the gray area. Mine shows 31% under the green bar. Check your display settings and try toggling the "show array utilization indicator" to see if it changes. Ahhh thanks for this hint - now its gone Edited January 14, 2018 by Zonediver Link to comment
archedraft Posted January 14, 2018 Share Posted January 14, 2018 Upgraded from latest RC. unRAID booted fine and all VMs and Dockers appeared to load when all of the sudden everything froze. Let it sit for 10 mins but it’s was completely unresponsive, not even CLI. Had to hard reset so no diags. Upon reboot my VMs did not auto start. Virtual Manager had set its self to not auto start and said the default ISO and VM storage paths did not exist. It was looking for the unRAID default paths which I removed many versions ago. Anyways, I set up my correct paths which were set that way in the last RC and started the VMs. unRAID has been up and working for the past 10 hours and everything appears to be good. Not sure what happened but my guess is the VM settings may have caused the original unresponsiveness. Anyways hope this may help As always, thanks LT for another great release with amazing features! Link to comment
maddog808 Posted January 14, 2018 Share Posted January 14, 2018 (edited) I've upgraded, and everything is working fine. I love the snappiness of the GUI, and just love all the support from this community overall!! So now that https is supported natively, does it remove the need to do the following in order to access Nextcloud and other apps outside of my LAN: https://cyanlabs.net/tutorials/the-complete-unraid-reverse-proxy-duck-dns-dynamic-dns-and-letsencrypt-guide/ I was in the middle of the process of getting duckdns, mariadb, letsencrypt, and nextcloud and had some issues with certificates. I upgraded to Unraid 6.4, and now I'm wondering if maybe doing all that other stuff is unnecessary? Sorry for my noobness when it comes to https access. I've never set up anything with external access before, with the exception of Plex Media Server. That was pretty straightforward though, with automatic router port forwarding, etc. Edited January 14, 2018 by maddog808 Link to comment
Koshy Posted January 14, 2018 Share Posted January 14, 2018 How do I fix this ? https://imgur.com/a/9PhFT I thought I could update to a stable version of an OS and not have to deal with problems tower-diagnostics-20180114-1251.zip tower-syslog-20180114-1252.zip Link to comment
Koshy Posted January 14, 2018 Share Posted January 14, 2018 20 minutes ago, Koshy said: How do I fix this ? https://imgur.com/a/9PhFT I thought I could update to a stable version of an OS and not have to deal with problems tower-diagnostics-20180114-1251.zip tower-syslog-20180114-1252.zip Deleting CA Community Applications seems to have stopped it. Link to comment
marcosv Posted January 14, 2018 Share Posted January 14, 2018 Tried upgrading from 6.3.5 stable using updates in the plugins page. Upon reboot, get messages about not being able to mount UNRAID. System comes up as "tower", having lost all of my settings. Checked the USB thumb drive; its volume label is still "UNRAID". Any suggestions on how to roll back to 6.3.5? I should have made a backup of the USB thumb drive before doing this update; but, I thought the update would go well. Motherboard is an ASRock EP2C602-4L/D16. USB 2 port is a front port hooked up to a motherboard USB header. Link to comment
Recommended Posts