ich777 Posted July 16, 2023 Author Share Posted July 16, 2023 46 minutes ago, holloway25 said: I have now reverted to 6.12.2 (All is working again) I really can‘t tell whats the issue here, I‘ve now gone through the code and nothing should it prevent from working and the Kernel was only update from 6.1.36 (unRAID 6.12.2) to 6.1.38 (unRAID 6.12.3) which shouldn‘t affect anythig so I‘m not sure what‘s causing this on your system. Sadly enough I have no hardware on hand so that I could try it and reproduce the error. Maybe someone else is posting here too then it is worth creating an issue over here in the repository where my plugin is based of: Click Quote Link to comment
letrain Posted July 16, 2023 Share Posted July 16, 2023 14 hours ago, ich777 said: It seems that he just built it and it should be now safe to install the plugin again. 😉 hasn't hit CA yet. i'll check the github Quote Link to comment
ich777 Posted July 16, 2023 Author Share Posted July 16, 2023 43 minutes ago, letrain said: hasn't hit CA yet. i'll check the github No, just install the plugin, this is enough, there is no plugin update, the packages are downloaded on installation or boot. 1 Quote Link to comment
zachlovescoffee Posted July 20, 2023 Share Posted July 20, 2023 Howdy, I installed the intel top gpu plugin. However, I'm not certain it's actually working. When I type in the command intel_gpu_top, I get the following back: intel_gpu_top > No device filter specified and no discrete/integrated i915 devices found. Also, when I use the GPU Statistics plugin, it never seems to recognize the Intel iGPU or produce any data. I have an Intel Xeon 2126g running on a SuperMicro X11SCL-F board. Any ideas how I could troubleshoot? Quote Link to comment
ich777 Posted July 20, 2023 Author Share Posted July 20, 2023 1 minute ago, zachlovescoffee said: Any ideas how I could troubleshoot? Yes, please post your Diagnostics. Quote Link to comment
zachlovescoffee Posted July 20, 2023 Share Posted July 20, 2023 Sorry about that - here you go! darkstar-diagnostics-20230720-1033.zip Quote Link to comment
ich777 Posted July 20, 2023 Author Share Posted July 20, 2023 1 hour ago, zachlovescoffee said: Sorry about that - here you go! I don't see a iGPU in your lspci output, are you sure that you've enabled it in the BIOS or at least set it to the primary GPU? This is the only GPU I see in your system: 07:00.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] (rev 41) DeviceName: ASPEED Video AST2500 Subsystem: Super Micro Computer Inc ASPEED Graphics Family [15d9:1a1f] Kernel driver in use: ast Kernel modules: ast Quote Link to comment
zachlovescoffee Posted July 20, 2023 Share Posted July 20, 2023 (edited) Seems like I'm screwed. QuickSync isn't supported by my board's chipset (CH242) :< This makes no sense to me at all though. How is it possible I am transcoding 4k video and audio on this ASPEED chip vs the Intel 2126g? It seems like the ASPEED chip would toast out? What I observe in unRAID is that whenever transcoding happens, the CPU starts to move big time. So, is it actually working but the values can't be passed into your tool? Should I upgrade my board to a higher than SuperMicro X11? https://forums.servethehome.com/index.php?threads/need-quick-sync.24653/ Edited July 20, 2023 by zachlovescoffee Quote Link to comment
ich777 Posted July 20, 2023 Author Share Posted July 20, 2023 1 hour ago, zachlovescoffee said: What I observe in unRAID is that whenever transcoding happens, the CPU starts to move big time. Yes, because you are using CPU/Software transcoding which will use a lot of power and CPU resources 1 hour ago, zachlovescoffee said: So, is it actually working but the values can't be passed into your tool? No, hardware transcoding is not working because you are using CPU/Software transcoding and that is why your CPU is spiking. intel_gpu_top can't show anything because a ASPEED chip is not a Intel iGPU, so to speak it is not possible for intel_gpu_top any stats from an ASPEED GPU. Quote Link to comment
SimonF Posted July 20, 2023 Share Posted July 20, 2023 1 hour ago, zachlovescoffee said: Seems like I'm screwed. QuickSync isn't supported by my board's chipset (CH242) :< This makes no sense to me at all though. How is it possible I am transcoding 4k video and audio on this ASPEED chip vs the Intel 2126g? It seems like the ASPEED chip would toast out? What I observe in unRAID is that whenever transcoding happens, the CPU starts to move big time. So, is it actually working but the values can't be passed into your tool? Should I upgrade my board to a higher than SuperMicro X11? https://forums.servethehome.com/index.php?threads/need-quick-sync.24653/ ASPEED is likely for the BMC, you may need to see if there is an option in the BIOS I have an X10 with no iGPU IOMMU group 10:[1a03:1150] 03:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge (rev 03) [1a03:2000] 04:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 30) Found this option, but not sure if that is for a DGPU or IGPU VGA Priority Use this feature to select VGA priority when multiple VGA devices are detected. Select Onboard to give priority to your onboard video device. Select Offboard to give priority to your graphics card. The options are Onboard and Offboard. Quote Link to comment
zachlovescoffee Posted July 20, 2023 Share Posted July 20, 2023 Would another possibly cheaper option be to purchase a decent dedicated GPU and pass transcoding to it? If that's the case, then I don't have to replace my motherboard. Could you share some thoughts on that thought? Quote Link to comment
ich777 Posted July 20, 2023 Author Share Posted July 20, 2023 2 minutes ago, zachlovescoffee said: Would another possibly cheaper option be to purchase a decent dedicated GPU and pass transcoding to it? My advice would be that you buy something faily recent and low power like a NVIDIA T400, you can get it for about 100,- and it can only consume a maximum of 35W, in idle my card pulls between 2 and 5W. But do your research first, it can do three simultaneous transcodes and has only 2GB of VRAM but that is enough for most people. Quote Link to comment
zachlovescoffee Posted July 20, 2023 Share Posted July 20, 2023 Thank you @ich777 that is very helpful! $100 is a way cheaper solution than $400 for a new board. I'm disappointed that I didn't understand the intricacies of this transcoding issue more. I thought I had really researched everything before I committed to spending nearly $1,000 on this server (including disks). Quote Link to comment
zachlovescoffee Posted July 20, 2023 Share Posted July 20, 2023 3 hours ago, ich777 said: My advice would be that you buy something faily recent and low power like a NVIDIA T400, you can get it for about 100,- and it can only consume a maximum of 35W, in idle my card pulls between 2 and 5W. But do your research first, it can do three simultaneous transcodes and has only 2GB of VRAM but that is enough for most people. so the 2gb is good enough vs the 4gb version? I found a 4gb for $95 bucks. We may have at most 4 transcodes going simultaneously. If our parents use it, then it could add a theoretical 5th. Quote Link to comment
ich777 Posted July 21, 2023 Author Share Posted July 21, 2023 5 hours ago, zachlovescoffee said: We may have at most 4 transcodes going simultaneously This is not possible with Nvidia cards since consumer cards are limited to 3 simultaneous transcodes. However if you have many 4k content then 4GB seems the better choice to me. You have to step it up a bit if you want more transcodes to a P2000 to get unlimited transcodes, I can‘t recommend a more recent card since I‘m not familiar with newer cards which have unlimited transcodes enabled. Quote Link to comment
alturismo Posted July 21, 2023 Share Posted July 21, 2023 6 hours ago, zachlovescoffee said: so the 2gb is good enough vs the 4gb version? I found a 4gb for $95 bucks. We may have at most 4 transcodes going simultaneously. If our parents use it, then it could add a theoretical 5th. 21 minutes ago, ich777 said: You have to step it up a bit if you want more transcodes to a P2000 to get unlimited transcodes, I can‘t recommend a more recent card since I‘m not familiar with newer cards which have unlimited transcodes enabled. may as starter here, expand the encoder part and then you can check about capabilities and sessions https://developer.nvidia.com/video-encode-and-decode-gpu-support-matrix-new 1 Quote Link to comment
zachlovescoffee Posted July 21, 2023 Share Posted July 21, 2023 6 hours ago, ich777 said: This is not possible with Nvidia cards since consumer cards are limited to 3 simultaneous transcodes. However if you have many 4k content then 4GB seems the better choice to me. You have to step it up a bit if you want more transcodes to a P2000 to get unlimited transcodes, I can‘t recommend a more recent card since I‘m not familiar with newer cards which have unlimited transcodes enabled. Thank you! Yes, lots of 4k content. Quote Link to comment
Lavoslav Posted July 23, 2023 Share Posted July 23, 2023 QNAP-EC You may add TS-453A to the list of known supported units. Works as intended. 1 Quote Link to comment
-C- Posted July 24, 2023 Share Posted July 24, 2023 Plugin page description typo: "Currently know supported units are:" Should be "Currently known supported units are:" 1 Quote Link to comment
frodr Posted July 27, 2023 Share Posted July 27, 2023 Aquacomputer D5 Next hwmon question. I am running "high flow next" on one server, The above plugin reads fan speed, se picture. Are there any plans to include any other readings as in the project list to this plugin? It would be awesome to have the other values on desktop. Cheers, Quote Link to comment
ich777 Posted July 27, 2023 Author Share Posted July 27, 2023 11 minutes ago, frodr said: "high flow next" Are you already on Unraid 6.12.3? According to the GitHub repository which my plugin is based on your device should be supported since Kernel 6.1.x (which Unraid 6.12.x is based on). Quote Link to comment
frodr Posted July 27, 2023 Share Posted July 27, 2023 12 minutes ago, ich777 said: Are you already on Unraid 6.12.3? According to the GitHub repository which my plugin is based on your device should be supported since Kernel 6.1.x (which Unraid 6.12.x is based on). I'm on 6.12.3. I get air flow readings only. It would be grate to get the other values as well. Quote Link to comment
ich777 Posted July 27, 2023 Author Share Posted July 27, 2023 2 minutes ago, frodr said: I'm on 6.12.3. I get air flow readings only. It would be grate to get the other values as well. I would recommend that you first look in the linked repository if you have to do anything else to get those readigs. Do you see the values when you issue: sensors from a Unraid terminal? If you see those values you have to extract them yourself, I have no plans on adding a Dashboard card to the plugin. Quote Link to comment
frodr Posted July 27, 2023 Share Posted July 27, 2023 37 minutes ago, ich777 said: I would recommend that you first look in the linked repository if you have to do anything else to get those readigs. Do you see the values when you issue: sensors from a Unraid terminal? If you see those values you have to extract them yourself, I have no plans on adding a Dashboard card to the plugin. The sensor values are there: highflownext-hid-3-3 Adapter: HID adapter +5V voltage: 4.74 V +5V USB voltage: 4.95 V Flow [dL/h]: 1741 RPM Water quality [%]: 3334 RPM Conductivity [nS/cm]: 800 RPM Coolant temp: +28.0°C External sensor: N/A Dissipated power: 4.29 kW The values seems correct except that it says RPM. I dial in on the project. Thanks again. Quote Link to comment
Paff Posted July 30, 2023 Share Posted July 30, 2023 Hi everyone, Ive got a problem. I installed the Radeon-TOP Plugin. Checked the GPU Statistic app and could select the GPU (AMD 6950XT). A minute later my whole system crashed and restarted. Now my system needs round about 30W more then before. Cannot restart because of an ongoing parity check. The parity check couldnt complete because of the crash. Does removing the plugin and restarting the system bring back my old power consumption? Or did it brick my card now? Or do I need to also remove some code from a file? I can still use the card in a VM (settings not changed, same Bios) like I did before. But still also idleing doesnt lower the consumption it stays around the same. Want my old consumption back. Thanks in Advance. BR Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.