luixmod Posted May 9, 2021 Share Posted May 9, 2021 1 minute ago, ropes said: Can you post the output please? Also from memory, I think that the wallet needs to be fully synced with the chia network before it displays anything. Sent from my GM1913 using Tapatalk i created a new wallet when i config again the docker, so now it shows the wallet, and like you said it is not sync, i have to wait Quote Link to comment
burgess22 Posted May 9, 2021 Share Posted May 9, 2021 (edited) 22 minutes ago, luixmod said: i created a new wallet when i config again the docker, so now it shows the wallet, and like you said it is not sync, i have to wait you can also use this command once you are in sync and farming docker exec -it chia venv/bin/chia farm summary Edited May 9, 2021 by burgess22 Quote Link to comment
luixmod Posted May 9, 2021 Share Posted May 9, 2021 12 minutes ago, burgess22 said: you can also use this command once you are in sync and farming docker exec -it chia venv/bin/chia farm summary about farming, after he sync and ploting he starts to farming? Quote Link to comment
burgess22 Posted May 9, 2021 Share Posted May 9, 2021 21 minutes ago, luixmod said: about farming, after he sync and ploting he starts to farming? as you can see im rich as sin =D but it shows u how much u have how much you have plotted and what not 1 Quote Link to comment
Pixel5 Posted May 9, 2021 Share Posted May 9, 2021 People probably should look into this video here to see which SSD they wanna assign to this and if they are willing to basically destroy it withing a few weeks. TL:DW is Chia takes considerably more power to run then the marketing makes it seem its by no means a "green" crypto and within just one week of farming it wrote 50TB to the SSD which was for his higher end SSD 3% of the rated TBW so within less then a year that SSD will be hitting its TBW limit Quote Link to comment
jollymonsa Posted May 9, 2021 Share Posted May 9, 2021 (edited) Something is not right, unsure of what. This has been running for 20 hours already. Initiated with cmd: venv/bin/chia plots create -b 5000 -r 2 -n 6 -t /plotting/plot1 -d /plots # venv/bin/chia farm summary Connection error. Check if farmer is running at 8559 Farming status: Syncing Total chia farmed: 0.0 User transaction fees: 0.0 Block rewards: 0.0 Last height farmed: 0 Plot count: 0 Total size of plots: 0.000 GiB Estimated network space: 2613.697 PiB Expected time to win: Unknown Note: log into your key using 'chia wallet show' to see rewards for each key venv/bin/chia plots check 2021-05-09T05:03:23.573 chia.plotting.check_plots : INFO Loading plots in config.yaml using plot_tools loading code 2021-05-09T05:03:25.399 chia.plotting.plot_tools : INFO Searching directories ['/plots'] 2021-05-09T05:03:25.400 chia.plotting.plot_tools : INFO Loaded a total of 0 plots of size 0.0 TiB, in 0.06633210182189941 seconds 2021-05-09T05:03:25.400 chia.plotting.check_plots : INFO 2021-05-09T05:03:25.401 chia.plotting.check_plots : INFO 2021-05-09T05:03:25.401 chia.plotting.check_plots : INFO Summary 2021-05-09T05:03:25.401 chia.plotting.check_plots : INFO Found 0 valid plots, total size 0.00000 TiB # venv/bin/chia plots check 2021-05-09T15:54:52.213 chia.plotting.check_plots : INFO Loading plots in config.yaml using plot_tools loading code 2021-05-09T15:54:53.957 chia.plotting.plot_tools : INFO Searching directories ['/plots'] 2021-05-09T15:54:54.222 chia.plotting.plot_tools : INFO Found plot /plots/plot-k32-2021-05-08-22-14-6073b11d5b1d4d655748135c36076ba121ae6ed1d81f38e863215d67c527fd8e.plot of size 32 2021-05-09T15:54:54.222 chia.plotting.plot_tools : INFO Loaded a total of 1 plots of size 0.09893322847165109 TiB, in 0.33187055587768555 seconds 2021-05-09T15:54:54.223 chia.plotting.check_plots : INFO 2021-05-09T15:54:54.223 chia.plotting.check_plots : INFO 2021-05-09T15:54:54.223 chia.plotting.check_plots : INFO Starting to test each plot with 30 challenges each 2021-05-09T15:54:54.223 chia.plotting.check_plots : INFO Testing plot /plots/plot-k32-2021-05-08-22-14-XXXXXXXXXXXXXXXXXXXXXXXXXX863215d67c527fd8e.plot k=32 2021-05-09T15:54:54.223 chia.plotting.check_plots : INFO Pool public key: 8f3622aa023885006XXXXXXXXXXXXXXXXXXXXXXXXXXdb03c4ca83cc5f3d5 2021-05-09T15:54:54.246 chia.plotting.check_plots : INFO Farmer public key: aa4835ad9ede103df8172d83c93XXXXXXXXXXXXXXXXXXXXXXXXXX1db92e70d8e251 2021-05-09T15:54:54.247 chia.plotting.check_plots : INFO Local sk: <PrivateKey 11ab05946346ca5262aXXXXXXXXXXXXXXXXXXXXXXXXXX26e4af89a> 2021-05-09T15:55:04.819 chia.plotting.check_plots : INFO Proofs 23 / 30, 0.7667 2021-05-09T15:55:04.820 chia.plotting.check_plots : INFO 2021-05-09T15:55:04.820 chia.plotting.check_plots : INFO 2021-05-09T15:55:04.820 chia.plotting.check_plots : INFO Summary 2021-05-09T15:55:04.820 chia.plotting.check_plots : INFO Found 1 valid plots, total size 0.09893 TiB 2021-05-09T15:55:04.820 chia.plotting.check_plots : INFO 1 plots of size 32 Edited May 9, 2021 by jollymonsa Quote Link to comment
jollymonsa Posted May 9, 2021 Share Posted May 9, 2021 My issues may also be your issues, CHIA is currently out of sync, some sort of a hotpatch is in the works as I type that will address this issue. My issues may be related. Quote Link to comment
Micro553 Posted May 9, 2021 Share Posted May 9, 2021 Finally got it working and its plotting. However when setting it up with the guide on reddit it was pointed out that one needed to open port 8444 Do I really need that? Thanks. Quote Link to comment
Partition Pixel Posted May 10, 2021 Author Share Posted May 10, 2021 19 hours ago, ozzylins said: HI guys, tks for the docker... Just installed yesterday.. I´m still a big noob with all linux based tech, but I think its working... just wondering if any GUI for the docker it´s the "new feature´s" list.. BTW I did the Htop thing and my top processes are: best regards If you're not plotting I think this is what is expected to see 14 hours ago, ropes said: This is how I monitor my farm. If you guys install the nerd pack from community applications, then navigate to nerd pack under settings, install tmux. Now launch the unraid terminal & run tmux, then you can have multiple (tabbed) terminal windows in one window. I have 1 tab per plot & can jump around them as needed. Also you can close the terminal window & relaunch your session by running tmux again from the terminal. Also works across different devices or applications, so you can ssh in from your phone or putty etc & just run tmux again & you will be able to see those other terminal windows. Hope this helps. Brilliant this is definitely the way, I'll update the original post with this info ! Quote Link to comment
Partition Pixel Posted May 10, 2021 Author Share Posted May 10, 2021 (edited) 9 hours ago, Pixel5 said: People probably should look into this video here to see which SSD they wanna assign to this and if they are willing to basically destroy it withing a few weeks. TL:DW is Chia takes considerably more power to run then the marketing makes it seem its by no means a "green" crypto and within just one week of farming it wrote 50TB to the SSD which was for his higher end SSD 3% of the rated TBW so within less then a year that SSD will be hitting its TBW limit Agreed for the SSD life, this is something everyone should be aware of, and it is documented on the chia wiki as well (see : https://github.com/Chia-Network/chia-blockchain/wiki/SSD-Endurance) One thing I'd like to say tho, is that you are not going to plot forever, unless you have unlimited storage. Once all your HDD are filled with plots, your SSD is not gonna have any more wear and this is where the crypto becomes green, compared to proof of work where you will always be working no matter what. Once that happens, your processor, ram, and SSD are not really used anymore (barely). Your disks are gonna be spun up once in while when you have some plots passing filter. For SSD life, In general, it takes about 1.8 TBW per plot, and my consumer SSD are warranted until they reach 600 TBW, but I am aware of that and I will not reach 600 because my storage is soon all filled up. It really depends on the use case I would say. Edited May 10, 2021 by Partition Pixel Quote Link to comment
Partition Pixel Posted May 10, 2021 Author Share Posted May 10, 2021 (edited) 8 hours ago, jollymonsa said: My issues may also be your issues, CHIA is currently out of sync, some sort of a hotpatch is in the works as I type that will address this issue. My issues may be related. Yes I think they released 1.1.5 for this (https://github.com/Chia-Network/chia-blockchain/releases/tag/1.1.5), the docker version should come along soon enough 5 hours ago, Micro553 said: Finally got it working and its plotting. However when setting it up with the guide on reddit it was pointed out that one needed to open port 8444 Do I really need that? Thanks. Some people need to open the port on their router, some don't, if you needed it to make things work it's possible and fine (imo) Edited May 10, 2021 by Partition Pixel 1 Quote Link to comment
danktankk Posted May 10, 2021 Share Posted May 10, 2021 (edited) How do we map log files to say.... /appdata/logs for this container? the template doesnt appear to have any way to see or route them Edited May 10, 2021 by danktankk Quote Link to comment
ozzylins Posted May 10, 2021 Share Posted May 10, 2021 2 hours ago, Partition Pixel said: If you're not plotting I think this is what is expected to see Brilliant this is definitely the way, I'll update the original post with this info ! That´s the problem,... I don´t know what I am doing.. lol Is there a real newbie tutorial to farm with docker on unraid? I volunteer to be the "lab rat" of such topic... = ) Found this https://pythonawesome.com/a-cross-platform-plot-manager-for-chia-plotting/, perhaps "we" could create a docker for it... Quote Link to comment
tjb_altf4 Posted May 10, 2021 Share Posted May 10, 2021 Looks like new image has been build, it should appear shortly. It is recommended to update as soon as you can. 1 Quote Link to comment
equipped Posted May 10, 2021 Share Posted May 10, 2021 When the docker updates on github will it update automatically if we re-install the docker? Quote Link to comment
threiner Posted May 10, 2021 Share Posted May 10, 2021 I think i did some mistake, i installed the docker, and used wrong path for ploting so the container was full. I decidet then to remove the docker of chia to start over. But now i get this error and have not really a idea how to fix that... oot@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='chia' --net='host' -e TZ="Europe/Berlin" -e HOST_OS="Unraid" -e 'keys'='/root/.chia/mnemonic.txt' -e 'full_node_port'='' -e 'farmer_address'='' -e 'farmer_port'='' -e 'testnet'='false' -e 'farmer'='false' -e 'harvester'='false' -e 'TCP_PORT_8444'='8444' -e 'TCP_PORT_8555'='8555' -v '/mnt/user/TOWER/plotflder/':'/plots':'rw' -v '/mnt/chiac/':'/plotting':'rw' -v '/mnt/user/appdata/chia/':'/root/.chia':'rw' 'ghcr.io/chia-network/chia:latest' c0ff0685119e98c1ab473d49f08df3906ba139b513dc33b3acd099390b228a0e docker: Error response from daemon: endpoint with name chia already exists in network host. The command failed. Quote Link to comment
ropes Posted May 10, 2021 Share Posted May 10, 2021 (edited) 40 minutes ago, threiner said: I think i did some mistake, i installed the docker, and used wrong path for ploting so the container was full. I decidet then to remove the docker of chia to start over. But now i get this error and have not really a idea how to fix that... oot@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='chia' --net='host' -e TZ="Europe/Berlin" -e HOST_OS="Unraid" -e 'keys'='/root/.chia/mnemonic.txt' -e 'full_node_port'='' -e 'farmer_address'='' -e 'farmer_port'='' -e 'testnet'='false' -e 'farmer'='false' -e 'harvester'='false' -e 'TCP_PORT_8444'='8444' -e 'TCP_PORT_8555'='8555' -v '/mnt/user/TOWER/plotflder/':'/plots':'rw' -v '/mnt/chiac/':'/plotting':'rw' -v '/mnt/user/appdata/chia/':'/root/.chia':'rw' 'ghcr.io/chia-network/chia:latest' c0ff0685119e98c1ab473d49f08df3906ba139b513dc33b3acd099390b228a0e docker: Error response from daemon: endpoint with name chia already exists in network host. The command failed. This is normally caused by the container still having an active network connection. Usually caused by not stopping a container before removal. docker network disconnect <network name> <container name> That command should kill any active connections. Sent from my GM1913 using Tapatalk Edited May 10, 2021 by ropes 2 Quote Link to comment
gandalf15 Posted May 10, 2021 Share Posted May 10, 2021 I tried to run it, since I have a Windows Chia client in the same network I tried to change the port to 8445. But somehow it always adds it anyway as 8444. And therefor it doesnt work. Anyone knows how to fix it? Quote Link to comment
jortan Posted May 10, 2021 Share Posted May 10, 2021 (edited) 1 hour ago, threiner said: I think i did some mistake, i installed the docker, and used wrong path for ploting so the container was full. I decidet then to remove the docker of chia to start over. But now i get this error and have not really a idea how to fix that... edit: misread the issue, never mind Edited May 10, 2021 by jortan 1 Quote Link to comment
gperpetuo Posted May 10, 2021 Share Posted May 10, 2021 Is there a way to export the mnemonics words from docker? So that I can import those on the windows app, etc? From the CLI commands list I didn't see a command for it and from the wallet keys I don't see a way to import to the windows app to always use the same wallet... Quote Link to comment
ropes Posted May 10, 2021 Share Posted May 10, 2021 8 minutes ago, gperpetuo said: Is there a way to export the mnemonics words from docker? So that I can import those on the windows app, etc? From the CLI commands list I didn't see a command for it and from the wallet keys I don't see a way to import to the windows app to always use the same wallet... You can use the command below to show your mnemonic phrase. docker exec -it chia venv/bin/chia keys show --show-mnemonic-seed 1 Quote Link to comment
gperpetuo Posted May 10, 2021 Share Posted May 10, 2021 Thanks! 😃 I had used "docker exec -it chia venv/bin/chia keys show" before. Was missing the "--show-mnemonic-seed" Quote Link to comment
Dschijn Posted May 10, 2021 Share Posted May 10, 2021 Any idea how to trigger the Chia Docker to sync the blockchain? I did sync for more than 1 day and is now at a different netspace as my Windows PC. Also the Docker gives the status not synced as the blockchain status. Quote Link to comment
burgess22 Posted May 10, 2021 Share Posted May 10, 2021 8 hours ago, ozzylins said: Found this https://pythonawesome.com/a-cross-platform-plot-manager-for-chia-plotting/, perhaps "we" could create a docker for it... I have got this running on windows...i reckon if i can just find the python CLI for chia in unraid i can get it to work but i cant find it yet any one else found all i need to finish is the config.yaml in the Swar-Chia-Plot-Manager need to point the scrypt to the python CLI Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.