domrockt Posted December 2, 2023 Share Posted December 2, 2023 (edited) 4 minutes ago, Daniel15 said: which CPU are you using? iam occupied to atm, i have an 13700k in my Server, i have no hiccups what so ever i can use PLEX/encode/VM at the same time i went from 6.12.3 to 6.12.4 with the old Plugin and used the Patch from ich777, from there i used the new Plugin and thats it. updated from 6.12.4 to 6.12.5 and 6.12.6 the Plugin did the updating on its own. Edited December 2, 2023 by domrockt Link to comment
ich777 Posted December 2, 2023 Share Posted December 2, 2023 56 minutes ago, Daniel15 said: @domrocktand @neunghaha28 - which CPU are you using? Have you posted your Diagnostics yet? Link to comment
neunghaha28 Posted December 2, 2023 Share Posted December 2, 2023 1 hour ago, Daniel15 said: Hmm... I'll have to try and figure out why mine is crashing. I tested five times and could consistently repro the crash on 6.12.5, whereas it never happens with 6.12.4. Unfortunately I don't have a test system with an Intel CPU, just my production system, so I'll probably just have to stick to 6.12.4 for now. @domrocktand @neunghaha28 - which CPU are you using? i5 13500 Link to comment
Daigurren69 Posted December 5, 2023 Share Posted December 5, 2023 Everytime I try to use a VF in a VM it disappears from the VFIO and I have to restart to have it reappear again just to not be able to add it to a VM. The VF just always disappear. Link to comment
mikeyosm Posted December 6, 2023 Share Posted December 6, 2023 (edited) I just built a second UNRAID server with a low power 11900K (bit of a contradiction I know) and an Asrock Z490D4U-2lT2 motherboard. I want to split the iGPU between Plex for transcoding and one other VM for some very light remote gaming/emulation. Is the SRV IO plugin going to enable me to achieve this set up and is there anything I need to be aware of config wise to get this to work? Just installed the plugin and it says my 11900 is not supported or may be in VF mode. I thought the SRV IO plugin worked with the 11900k and what is VF mode? Edited December 6, 2023 by mikeyosm Link to comment
alturismo Posted December 6, 2023 Share Posted December 6, 2023 1 hour ago, mikeyosm said: Just installed the plugin and it says my 11900 is not supported or may be in VF mode. I thought the SRV IO plugin worked with the 11900k and what is VF mode? sadly the 11th Series Intel Chips are "hit & miss" ... while way more misses ... no gvt-g support as 11th gen, no sr iov support ... even its stated more or less by Intel ... mentioned several times about 11th gen CPU's .. sorry ... 1 Link to comment
mikeyosm Posted December 6, 2023 Share Posted December 6, 2023 1 hour ago, alturismo said: sadly the 11th Series Intel Chips are "hit & miss" ... while way more misses ... no gvt-g support as 11th gen, no sr iov support ... even its stated more or less by Intel ... mentioned several times about 11th gen CPU's .. sorry ... No problem, bit of a shame. My other UNRAID server has an Nvidia P4 so not too much of an issue for me. Link to comment
martinkeat Posted December 10, 2023 Share Posted December 10, 2023 Hi @ich777 Tried installing the plugin tonight and got the following on install: plugin: downloading: i915-sriov.plg ... done plugin: downloading: unraid-i915-sriov-2023.04.06.txz ... done +============================================================================== | Installing new package /boot/config/plugins/i915-sriov/unraid-i915-sriov-2023.04.06.txz +============================================================================== Verifying package unraid-i915-sriov-2023.04.06.txz. Installing package unraid-i915-sriov-2023.04.06.txz: PACKAGE DESCRIPTION: Package unraid-i915-sriov-2023.04.06.txz installed. patching file usr/local/emhttp/plugins/dynamix.vm.manager/include/libvirt.php Hunk #1 succeeded at 816 (offset 36 lines). +============================================================================== | WARNING - WARNING - WARNING - WARNING - WARNING - WARNING - WARNING - WARNING | | Don't close this window with the red 'X' in the top right corner | until the 'DONE' button is displayed! | | WARNING - WARNING - WARNING - WARNING - WARNING - WARNING - WARNING - WARNING +============================================================================== ----------Downloading i915-sriov module Package for kernel v6.1.64---------- ---------This could take some time, please don't close this window!----------- --------Can't download i915-sriov module Package for kernel v6.1.64----------- plugin: run failed: '/bin/bash' returned 1 Executing hook script: post_plugin_checks Any assistance you can offer would be appreciated. Link to comment
alturismo Posted December 10, 2023 Share Posted December 10, 2023 2 hours ago, martinkeat said: Any assistance you can offer would be appreciated. well, you see the error 2 hours ago, martinkeat said: --------Can't download i915-sriov module Package for kernel v6.1.64-------- usually its - you have issues downloading from github - you have some other DNS in your net running which collides - ... also could be (uncommon) - even broken USB, no spave left on Flash USB - ... are you using any DNS solutions at home, are you may blocked due DNS setup ... 1 Link to comment
knatzkopp Posted December 11, 2023 Share Posted December 11, 2023 Hi, unfortunately I have the same error as martinkeat. The i915 plugin worked fine, but after the update to Unraid 6.12.6 the VF/drivers could no longer be bound. My syslog contains only the following entry: Dec 11 00:50:13 unraid root: plugin: creating: /boot/config/plugins/i915-sriov//unraid-i915-sriov-2023.04.06.txz - downloading from URL https://raw.githubusercontent.com/zhtengw/unraid-i915-sriov/master/packages/unraid-i915-sriov-2023.04.06.txz Dec 11 00:50:14 unraid root: plugin: running: upgradepkg --install-new /boot/config/plugins/i915-sriov//unraid-i915-sriov-2023.04.06.txz I am concerned about the two "//" in the path or is this unfounded? It seems to me that I have a corrupt installation. Are there any instructions on how to manually remove the module etc.? Despite the statement "allready installed", I can't find an i915 entry under /boot/config/plugins, for example. Many thanks for your tips and help. I have no DNS problem, a wget https://raw.githubusercontent.com/zhtengw/unraid-i915-sriov/master/packages/unraid-i915-sriov-2023.04.06.txz is successfully possible via ssh, also write access to /boot/config/ Link to comment
ich777 Posted December 11, 2023 Share Posted December 11, 2023 9 hours ago, knatzkopp said: unfortunately I have the same error as martinkeat. On 12/10/2023 at 1:55 AM, martinkeat said: Tried installing the plugin tonight and got the following on install: It looks like both of you are using the old plugin, since the plugin date from my fork is: 2023.11.22 and not 2023.04.06 Please look at the first recommended post in this thread on top, uninstall the old plugin and install my fork since @zhtengw seems like to be not active anymore and that's why I forked the plugin (I explained this in the recommended post). 1 Link to comment
knatzkopp Posted December 11, 2023 Share Posted December 11, 2023 1 hour ago, ich777 said: It looks like both of you are using the old plugin, since the plugin date from my fork is: 2023.11.22 and not 2023.04.06 Please look at the first recommended post in this thread on top, uninstall the old plugin and install my fork since @zhtengw seems like to be not active anymore and that's why I forked the plugin (I explained this in the recommended post). Oh sorry, as we like to say in Germany: I can't see the wood for the trees... Didn't follow the pinned message. After an install & reboot everything is great again. Thanks for the quick help -> reading always helps, should just do it 2 Link to comment
Quadrupole Posted December 12, 2023 Share Posted December 12, 2023 (edited) On 11/23/2023 at 2:53 PM, Dotmaster5 said: Hello alturismo, I had the same Problems like you, i can not start Parsec or Sunshine because the IGPU was not able to output to an Display. I Try it with an HDMI Display connected, but it was not recognized inside the VM so the GPU can not set as output device. The IGPU has no fault, no error 43 or something, it works and was shown in the Device Manager and as a working GPU in the Task Manager. When i start a Program, like Ungine Heaven, it shows a Load in the Task Manager and also in the GPU Statistics on Unraid so basicly the IGPU was working correctly. A Short test with a Docker Container ( Steam Headless ) was working, it shows the connected Display and works nice. I think the Problem has something to do with the Parstrough to the VM, maybe something is missing so that the Display information was not passing to the VM / Intel IGPU Driver. I have some more Servers with Nvidia GPU´s (Grid K2, Tesla M10, Tesla P4) but i never seen such Problems with the GPU Pastrough to a VM. My CPU is a I3-N305 and the System is a Beelink EQ12 Pro So I was at the exact point you were at last night. I googled a bit more, and I came across this post by scoops22 on reddit (attached to this reply). Using the older intel driver and the virtual display from MikeTheTech worked! I can now use Sunshine to stream from my 12600k iGPU. Thank you everyone involved in making this work! Edited December 12, 2023 by Quadrupole screenshot 1 Link to comment
alturismo Posted December 13, 2023 Share Posted December 13, 2023 7 hours ago, Quadrupole said: and the virtual display from MikeTheTech worked! thanks alot for the "wink", tested here now and yes, also working here on the n100 platform now, same behaviour as gvt-g with hw de/encoding, very nice and thanks sgain, this made me fire up the plugin and the vm again to give it a try and worked out Link to comment
alturismo Posted December 13, 2023 Share Posted December 13, 2023 may 1 addition i see here, while connected to the VM everything is smooth and running fine, but once i quit the connection and the VM is in idle ... CPU usage is increasing to 100 % here. Once i reconnect to the VM (either way, Parsec, VNC, ...) the VM returns to normal state and CPU usage is back to normal again. just as note from my side here in use disconnected and in idle Link to comment
WowaDriver Posted December 13, 2023 Share Posted December 13, 2023 Hey @all, do i understand it right... whit this plugin i can virtualize the uhd 770 of an 13900k to many vm's i want and can also use it simulantiously in the dockers like emby and plex? Link to comment
alturismo Posted December 13, 2023 Share Posted December 13, 2023 1 hour ago, WowaDriver said: Hey @all, do i understand it right... whit this plugin i can virtualize the uhd 770 of an 13900k to many vm's i want and can also use it simulantiously in the dockers like emby and plex? exactly once its up and running Link to comment
WowaDriver Posted December 15, 2023 Share Posted December 15, 2023 What do you mean with „once it’s up and running“? Do I not have the possibility to shut down the vm‘s? Link to comment
ich777 Posted December 15, 2023 Share Posted December 15, 2023 54 minutes ago, WowaDriver said: What do you mean with „once it’s up and running“? Do I not have the possibility to shut down the vm‘s? I think he was talking about the plugin itself (please also read the recommended post on top of this thread). 2 Link to comment
alturismo Posted December 15, 2023 Share Posted December 15, 2023 3 hours ago, WowaDriver said: What do you mean with „once it’s up and running“? Do I not have the possibility to shut down the vm‘s? hehe, of course you do, as @ich777 mentioned, talking about the plugin and functions ... then you can use it side by side simultan ... Host (Dockers) and VM's (vgpu's passed through). Link to comment
dirkinthedark Posted December 23, 2023 Share Posted December 23, 2023 I've been having some issues after the latest update. 6.12.6. One of the issues I am having now is my /dev/dri has disappeared. Note: I do not have an HDMI dummy plug installed, I didn't have one prior to upgrade don't know if that matters. Note: I do not know if any bios settings got reset during reboots, it MIGHT be disabled in bios I can not check as I am remote for a while. System: 13700k with the 770 iGPU Radeon Card for VM The system devices tab shows my iGPU and that it is in the kernel. INTEL_GPU_TOP also shows no devices. When I install the SR_IOV plugin I get an error up top saying a process is still running and then eventually the GUI hangs. Don't know if that's related but there it is. Tried with both /boot/config/modprobe.d/i915.conf - empty file and /boot/config/modprobe.d/i915.conf - blacklist i915 root@brain:/dev# lsmod | grep -i 'i915' i915 2527232 1 iosf_mbi 20480 2 i915,intel_rapl_common drm_buddy 16384 2 amdgpu,i915 i2c_algo_bit 16384 2 amdgpu,i915 ttm 77824 3 amdgpu,drm_ttm_helper,i915 drm_display_helper 135168 2 amdgpu,i915 drm_kms_helper 167936 3 drm_display_helper,amdgpu,i915 intel_gtt 24576 1 i915 drm 495616 9 gpu_sched,drm_kms_helper,drm_display_helper,drm_buddy,amdgpu,drm_ttm_helper,i915,ttm video 61440 2 amdgpu,i915 i2c_core 86016 8 drm_kms_helper,i2c_algo_bit,drm_display_helper,i2c_smbus,amdgpu,i2c_i801,i915,drm backlight 20480 5 video,drm_display_helper,amdgpu,i915,drm root@brain:/dev# modinfo i915 filename: /lib/modules/6.1.64-Unraid/kernel/drivers/gpu/drm/i915/i915.ko.xz license: GPL and additional rights description: Intel Graphics author: Intel Corporation author: Tungsten Graphics, Inc. import_ns: DMA_BUF root@brain:/dev# lspci -k 00:00.0 Host bridge: Intel Corporation Device a703 (rev 01) DeviceName: Onboard - Other Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7d32 00:01.0 PCI bridge: Intel Corporation Device a70d (rev 01) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7d32 Kernel driver in use: pcieport 00:02.0 VGA compatible controller: Intel Corporation Raptor Lake-S GT1 [UHD Graphics 770] (rev 04) DeviceName: Onboard - Video Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7d32 Kernel driver in use: i915 Kernel modules: i915 00:06.0 PCI bridge: Intel Corporation Raptor Lake PCIe 4.0 Graphics Port (rev 01) Kernel driver in use: pcieport 00:08.0 System peripheral: Intel Corporation GNA Scoring Accelerator module (rev 01) DeviceName: Onboard - Other Current setup: INTEL_GPU_TOP installed, SR_IOV not installed, /dev/dri missing Thank you in advance to anyone looking at this. Derek brain-diagnostics-20231223-1641.zip Link to comment
dirkinthedark Posted December 25, 2023 Share Posted December 25, 2023 For what its worth, after I unbound my AMD card from VRIO, deleted that, removed all plugins (Intel), and removed the modprobe.d for i915 it showed up again. Go figure. Link to comment
ich777 Posted December 25, 2023 Share Posted December 25, 2023 2 hours ago, dirkinthedark said: For what its worth, after I unbound my AMD card from VRIO, deleted that, removed all plugins (Intel), and removed the modprobe.d for i915 it showed up again. In the Diagnostics you've provided you have a Trace here: Dec 23 12:02:29 brain kernel: i915 0000:00:02.0: [drm] VT-d active for gfx access Dec 23 12:02:29 brain kernel: BUG: unable to handle page fault for address: 0000000fffffffe8 Dec 23 12:02:29 brain kernel: #PF: supervisor read access in kernel mode Dec 23 12:02:29 brain kernel: #PF: error_code(0x0000) - not-present page Dec 23 12:02:29 brain kernel: PGD 103b1c067 P4D 103b1c067 PUD 0 Dec 23 12:02:29 brain kernel: Oops: 0000 [#1] PREEMPT SMP NOPTI Dec 23 12:02:29 brain kernel: CPU: 8 PID: 1125 Comm: udevd Tainted: P O 6.1.64-Unraid #1 Dec 23 12:02:29 brain kernel: Hardware name: Micro-Star International Co., Ltd. MS-7D32/MAG Z690 TOMAHAWK WIFI DDR4 (MS-7D32), BIOS 1.F0 11/02/2023 Dec 23 12:02:29 brain kernel: RIP: 0010:kernfs_root+0x0/0x14 Dec 23 12:02:29 brain kernel: Code: 89 cb 44 8b 6c 24 30 e8 24 32 fb ff 48 8b bd 58 02 00 00 48 89 da 5b 48 89 c6 5d 4c 89 e1 45 89 e8 41 5c 41 5d e9 66 ff ff ff <48> 8b 47 08 48 85 c0 48 0f 45 f8 48 8b 47 50 c3 cc cc cc cc 0f 1f Dec 23 12:02:29 brain kernel: RSP: 0018:ffffc9000096fa88 EFLAGS: 00010286 Dec 23 12:02:29 brain kernel: RAX: 0000000000000000 RBX: 0000000fffffffe0 RCX: ffffffff813f52b3 Dec 23 12:02:29 brain kernel: RDX: 0000000000000000 RSI: ffffffff81e987e8 RDI: 0000000fffffffe0 Dec 23 12:02:29 brain kernel: RBP: ffffffff81e986a0 R08: 0000000000000000 R09: ffffffff829513f0 Dec 23 12:02:29 brain kernel: R10: 00003fffffffffff R11: fefefefefefefeff R12: ffff888107c25848 Dec 23 12:02:29 brain kernel: R13: ffff8881011be000 R14: ffff888103809b50 R15: ffff8881011be0d0 Dec 23 12:02:29 brain kernel: FS: 000014e276d8e240(0000) GS:ffff889fff600000(0000) knlGS:0000000000000000 Dec 23 12:02:29 brain kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Dec 23 12:02:29 brain kernel: CR2: 0000000fffffffe8 CR3: 0000000103992000 CR4: 0000000000750ee0 Dec 23 12:02:29 brain kernel: PKRU: 55555554 Dec 23 12:02:29 brain kernel: Call Trace: Dec 23 12:02:29 brain kernel: <TASK> Dec 23 12:02:29 brain kernel: ? __die_body+0x1a/0x5c Dec 23 12:02:29 brain kernel: ? page_fault_oops+0x329/0x376 Dec 23 12:02:29 brain kernel: ? do_user_addr_fault+0x12e/0x48d Dec 23 12:02:29 brain kernel: ? exc_page_fault+0xfb/0x11d Dec 23 12:02:29 brain kernel: ? asm_exc_page_fault+0x22/0x30 Dec 23 12:02:29 brain kernel: ? __blk_mq_run_hw_queue+0x73/0x73 Dec 23 12:02:29 brain kernel: ? kernfs_vfs_xattr_set+0x41/0x41 Dec 23 12:02:29 brain kernel: kernfs_find_and_get_ns+0x1c/0x5c Dec 23 12:02:29 brain kernel: sysfs_unmerge_group+0x16/0x4d Dec 23 12:02:29 brain kernel: dpm_sysfs_remove+0x1e/0x52 Dec 23 12:02:29 brain kernel: device_del+0xa4/0x31d Dec 23 12:02:29 brain kernel: ? i915_ggtt_probe_hw+0x593/0x5be [i915] Dec 23 12:02:29 brain kernel: platform_device_del+0x21/0x70 Dec 23 12:02:29 brain kernel: platform_device_unregister+0xf/0x19 Dec 23 12:02:29 brain kernel: sysfb_disable+0x2b/0x54 Dec 23 12:02:29 brain kernel: aperture_remove_conflicting_pci_devices+0x1e/0x82 Dec 23 12:02:29 brain kernel: i915_driver_probe+0x83f/0xc19 [i915] Dec 23 12:02:29 brain kernel: ? slab_free_freelist_hook.constprop.0+0x3b/0xaf Dec 23 12:02:29 brain kernel: local_pci_probe+0x3d/0x81 Dec 23 12:02:29 brain kernel: pci_device_probe+0x197/0x1eb Dec 23 12:02:29 brain kernel: ? sysfs_do_create_link_sd+0x71/0xb7 Dec 23 12:02:29 brain kernel: really_probe+0x115/0x282 Dec 23 12:02:29 brain kernel: __driver_probe_device+0xc0/0xf2 Dec 23 12:02:29 brain kernel: driver_probe_device+0x1f/0x77 Dec 23 12:02:29 brain kernel: ? __device_attach_driver+0x97/0x97 Dec 23 12:02:29 brain kernel: __driver_attach+0xd7/0xee Dec 23 12:02:29 brain kernel: ? __device_attach_driver+0x97/0x97 Dec 23 12:02:29 brain kernel: bus_for_each_dev+0x6e/0xa7 Dec 23 12:02:29 brain kernel: bus_add_driver+0xd8/0x1d0 Dec 23 12:02:29 brain kernel: driver_register+0x99/0xd7 Dec 23 12:02:29 brain kernel: i915_init+0x1f/0x7f [i915] Dec 23 12:02:29 brain kernel: ? 0xffffffffa0ab7000 Dec 23 12:02:29 brain kernel: do_one_initcall+0x82/0x19f Dec 23 12:02:29 brain kernel: ? kmalloc_trace+0x43/0x52 Dec 23 12:02:29 brain kernel: do_init_module+0x4b/0x1d4 Dec 23 12:02:29 brain kernel: __do_sys_init_module+0xb6/0xf9 Dec 23 12:02:29 brain kernel: do_syscall_64+0x68/0x81 Dec 23 12:02:29 brain kernel: entry_SYSCALL_64_after_hwframe+0x64/0xce Dec 23 12:02:29 brain kernel: RIP: 0033:0x14e2772a0dfa Dec 23 12:02:29 brain kernel: Code: 48 8b 0d 21 20 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ee 1f 0d 00 f7 d8 64 89 01 48 Dec 23 12:02:29 brain kernel: RSP: 002b:00007ffdde819638 EFLAGS: 00000246 ORIG_RAX: 00000000000000af Dec 23 12:02:29 brain kernel: RAX: ffffffffffffffda RBX: 0000000000468c20 RCX: 000014e2772a0dfa Dec 23 12:02:29 brain kernel: RDX: 000014e277395aad RSI: 00000000004b1868 RDI: 000014e276476010 Dec 23 12:02:29 brain kernel: RBP: 000014e277395aad R08: 0000000000000007 R09: 0000000000464e30 Dec 23 12:02:29 brain kernel: R10: 0000000000000005 R11: 0000000000000246 R12: 000014e276476010 Dec 23 12:02:29 brain kernel: R13: 0000000000000000 R14: 0000000000468600 R15: 0000000000000000 Dec 23 12:02:29 brain kernel: </TASK> Dec 23 12:02:29 brain kernel: Modules linked in: amdgpu zfs(PO+) i915(+) zunicode(PO) zzstd(O) intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel zlua(O) zavl(PO) icp(PO) kvm gpu_sched drm_ttm_helper iosf_mbi drm_buddy i2c_algo_bit ttm crct10dif_pclmul crc32_pclmul zcommon(PO) crc32c_intel drm_display_helper ghash_clmulni_intel sha512_ssse3 sha256_ssse3 btusb sha1_ssse3 znvpair(PO) btrtl drm_kms_helper mei_hdcp aesni_intel intel_gtt mei_pxp btbcm crypto_simd cryptd spl(O) drm wmi_bmof mxm_wmi rapl btintel intel_cstate bluetooth intel_uncore mpt3sas(+) nvme agpgart i2c_i801 mei_me syscopyarea i2c_smbus ahci sysfillrect raid_class ecdh_generic sysimgblt video tpm_crb igc i2c_core mei nvme_core scsi_transport_sas joydev libahci ecc fb_sys_fops thermal fan tpm_tis tpm_tis_core tpm wmi intel_pmc_core backlight acpi_pad acpi_tad button unix Dec 23 12:02:29 brain kernel: CR2: 0000000fffffffe8 Dec 23 12:02:29 brain kernel: ---[ end trace 0000000000000000 ]--- Dec 23 12:02:29 brain kernel: RIP: 0010:kernfs_root+0x0/0x14 Dec 23 12:02:29 brain kernel: Code: 89 cb 44 8b 6c 24 30 e8 24 32 fb ff 48 8b bd 58 02 00 00 48 89 da 5b 48 89 c6 5d 4c 89 e1 45 89 e8 41 5c 41 5d e9 66 ff ff ff <48> 8b 47 08 48 85 c0 48 0f 45 f8 48 8b 47 50 c3 cc cc cc cc 0f 1f Dec 23 12:02:29 brain kernel: RSP: 0018:ffffc9000096fa88 EFLAGS: 00010286 Dec 23 12:02:29 brain kernel: RAX: 0000000000000000 RBX: 0000000fffffffe0 RCX: ffffffff813f52b3 Dec 23 12:02:29 brain kernel: RDX: 0000000000000000 RSI: ffffffff81e987e8 RDI: 0000000fffffffe0 Dec 23 12:02:29 brain kernel: RBP: ffffffff81e986a0 R08: 0000000000000000 R09: ffffffff829513f0 Dec 23 12:02:29 brain kernel: R10: 00003fffffffffff R11: fefefefefefefeff R12: ffff888107c25848 Dec 23 12:02:29 brain kernel: R13: ffff8881011be000 R14: ffff888103809b50 R15: ffff8881011be0d0 Dec 23 12:02:29 brain kernel: FS: 000014e276d8e240(0000) GS:ffff889fff600000(0000) knlGS:0000000000000000 Dec 23 12:02:29 brain kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Dec 23 12:02:29 brain kernel: CR2: 0000000fffffffe8 CR3: 0000000103992000 CR4: 0000000000750ee0 Dec 23 12:02:29 brain kernel: PKRU: 55555554 This usually indicated a bug in the module itself and nothing I can do about, however it seems that everything is now working correct? However it should be not necessary to unbind you AMD card from VFIO. 1 Link to comment
dirkinthedark Posted December 25, 2023 Share Posted December 25, 2023 Yeah I know, I will try rebinding it now. Just stating what I did to get it all to work, don't know what the problem is. However, after browsing the forum and others issues it seems the 6.12.6 maybe .5 broke the iGPU and BTRFS file systems of some users. I just happened to have both. Link to comment
dirkinthedark Posted December 28, 2023 Share Posted December 28, 2023 So yeah, when I bind my AMD GPU it does something weird and removes my intel /dev/dri as well. @ich777 I don't know why this happens, if you are interested let me know and I will do any troubleshooting steps you would like me to do. Link to comment
Recommended Posts