dopeytree Posted June 16, 2023 Share Posted June 16, 2023 Anyone know a way to check on mover progress or log? It's done 2 shares fast 180MB/s+ then slowed down to 1 - 20MB/s. Quote Link to comment
Kilrah Posted June 16, 2023 Share Posted June 16, 2023 Only if mover logging is enabled... things will be fast for large files and slow when hitting many small ones such as appdata. Quote Link to comment
JustOverride Posted June 17, 2023 Share Posted June 17, 2023 Getting this email when I start the server: Event: VM Autostart disabled Subject: vfio-pci-errors Description: VM Autostart disabled due to vfio-bind error Importance: alert Please review /var/log/vfio-pci-errors Quote Link to comment
SimonF Posted June 17, 2023 Share Posted June 17, 2023 56 minutes ago, JustOverride said: Getting this email when I start the server: Event: VM Autostart disabled Subject: vfio-pci-errors Description: VM Autostart disabled due to vfio-bind error Importance: alert Please review /var/log/vfio-pci-errors Have a look at this post 1 Quote Link to comment
SkilledAlpaca Posted June 17, 2023 Share Posted June 17, 2023 Upgraded from 6.11.5 to 6.12. My Nvidia driver plugin was removed and caused a couple docker containers to not start. Reinstalling the plugin, disabling and re-enabling Docker fixed that issue. Otherwise the upgrade was smooth. Quote Link to comment
ChatNoir Posted June 17, 2023 Share Posted June 17, 2023 The update went without issues. 👍 Quote Link to comment
Zonediver Posted June 17, 2023 Share Posted June 17, 2023 (edited) Can someone tell me, if the sleep-plugin is still working? Had a lot of issues with previous versions of unraid... Unless this is resolved, I will not update... Edit: settled Edited June 17, 2023 by Zonediver Quote Link to comment
augot Posted June 17, 2023 Share Posted June 17, 2023 Excited to upgrade and finally see what all the fuss is about with ZFS. If I wanted to switch one of my array disks from XFS to ZFS, is it as simple as unbalancing everything off it, stopping the array, formatting the empty disk, then restarting the array and unbalancing everything back onto it? Or will that also destroy parity and require a rebuild of that too? Quote Link to comment
Kilrah Posted June 17, 2023 Share Posted June 17, 2023 29 minutes ago, augot said: Or will that also destroy parity and require a rebuild of that too? Formatting without array started would destroy parity. Stop array, click on disk, change format, start array, then it'll prompt you to format. Quote Link to comment
DCJona Posted June 17, 2023 Share Posted June 17, 2023 do anyone has issue accessing to the gui ? i can't access anymore .. Quote Link to comment
gyto6 Posted June 17, 2023 Share Posted June 17, 2023 13 minutes ago, DCJona said: do anyone has issue accessing to the gui ? i can't access anymore .. Quote Obsolete/Broken plugins There are a few plugins which are known to be incompatible with Unraid 6.12, and upon boot will not be installed. You will get a notification for each plugin that is affected and can review the list by going to Plugins/Plugin File Install Errors. disklocation-master version 2022.06.18 (Disk Location by olehj, breaks the dashboard) Update this plugin before upgrading the OS plexstreams version 2022.08.31 (Plex Streams by dorgan, breaks the dashboard) Update this plugin before upgrading the OS corsairpsu version 2021.10.05 (Corsair PSU Statistics by Fma965, breaks the dashboard) Update this plugin before upgrading the OS gpustat version 2022.11.30a (GPU Statistics by b3rs3rk, breaks the dashboard) Switch to GPU Statistics by SimonF ipmi version 2021.01.08 (IPMI Tools by dmacias72, breaks the dashboard) Switch to IPMI Tools by SimonF nut version 2022.03.20 (NUT - Network UPS Tools by dmacias72, breaks the dashboard) Switch to NUT - Network UPS Tools by SimonF NerdPack version 2021.08.11 (Nerd Tools by dmacias72) Switch to NerdTools by UnRAIDES upnp-monitor version 2020.01.04c (UPnP Monitor by ljm42, not PHP 8 compatible) ZFS-companion version 2021.08.24 (ZFS-Companion by campusantu, breaks the dashboard) Some of the affected plugins have been taken over by different developers, we recommend that you go to the Apps page and search for replacements. Please ask plugin-specific questions in the support thread for that plugin. Quote Link to comment
DCJona Posted June 17, 2023 Share Posted June 17, 2023 7 minutes ago, gyto6 said: ok but how can i update the plugin without strating the array and access? Quote Link to comment
gyto6 Posted June 17, 2023 Share Posted June 17, 2023 (edited) 5 minutes ago, DCJona said: ok but how can i update the plugin without strating the array and access? From SSH or physically on your server : plugin remove nameOfplgFile.plg Default folder is config/plugins on your OS drive Then reboot your server and install the fresh plugins Edited June 17, 2023 by gyto6 Quote Link to comment
DCJona Posted June 17, 2023 Share Posted June 17, 2023 3 minutes ago, gyto6 said: From SSH or physically on your server : plugin remove nameOfplgFile.plg Default folder is config/plugins on your OS drive Then reboot your server and install the fresh plugins Got this from the unraid GUI boot on a remote console Quote Link to comment
DCJona Posted June 17, 2023 Share Posted June 17, 2023 will try to delete those who have problem but i don't see anything on the log file Quote Link to comment
gyto6 Posted June 17, 2023 Share Posted June 17, 2023 3 minutes ago, DCJona said: No suspect plugin there... How can't you not access the web GUI? Where does it fail? Quote Link to comment
DCJona Posted June 17, 2023 Share Posted June 17, 2023 9 minutes ago, gyto6 said: No suspect plugin there... How can't you not access the web GUI? Where does it fail? i don't know ... LAN IPv4 192.168.100.161:82 (on https://connect.myunraid.net/) server seems ok but can't access... Quote Link to comment
JorgeB Posted June 17, 2023 Share Posted June 17, 2023 51 minutes ago, DCJona said: do anyone has issue accessing to the gui ? i can't access anymore .. Please start a new thread in the general support forum and add your diagnostics, you can also check this, it may be the same issue. Quote Link to comment
augot Posted June 17, 2023 Share Posted June 17, 2023 1 hour ago, Kilrah said: Formatting without array started would destroy parity. Stop array, click on disk, change format, start array, then it'll prompt you to format. I see - thank you for clarifying. Quote Link to comment
Zonediver Posted June 17, 2023 Share Posted June 17, 2023 (edited) A strange thing on v6.12.0: When i type an underscore, it shows a "space" 👍🤣 (drop_caches) Edited June 17, 2023 by Zonediver Quote Link to comment
JorgeB Posted June 17, 2023 Share Posted June 17, 2023 35 minutes ago, Zonediver said: When i type an underscore, it shows a "space" I believe that's a Firefox issue, try a different browser. Quote Link to comment
Zonediver Posted June 17, 2023 Share Posted June 17, 2023 (edited) 2 minutes ago, JorgeB said: I believe that's a Firefox issue, try a different browser. Well... you are right... but i didnt ever see this under 6.11.5 with FF... Never mind 👍 Edited June 17, 2023 by Zonediver Quote Link to comment
Woodpusherghd Posted June 17, 2023 Share Posted June 17, 2023 (edited) I upgraded to 6.12 from 6.11.5 and I can no longer access my serve from my windows 10 VM, i.e. my mapped drives are unavailable and while my server shows in the windows network I get an error message "the network path is not found" When I run Windows diagnostics it reports "Remote device won't accept the connection." I can access my server through the web gui in my windows vm interestingly enough. No Ip addresses have changed from 6.11.5 Diagnostics are attached. tower-diagnostics-20230617-1046.zip Edited June 17, 2023 by Woodpusherghd Quote Link to comment
augot Posted June 17, 2023 Share Posted June 17, 2023 1 hour ago, Kilrah said: Formatting without array started would destroy parity. Stop array, click on disk, change format, start array, then it'll prompt you to format. I see - thank you for clarifying. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.