MowMdown Posted September 15, 2017 Share Posted September 15, 2017 (edited) 9 hours ago, jrdnlc said: I’m trying to avoid starting from fresh since it will mess up my whole unwatched/watched status and the order in which movies were added. use trakt (Plex plugin) to manage watched/unwatched Edited September 15, 2017 by MowMdown Quote Link to comment
jrdnlc Posted September 15, 2017 Share Posted September 15, 2017 5 minutes ago, MowMdown said: use trakt (Plex plugin) to manage watched/unwatched I currently use that. How can I have it sync back to plex my watch/unwatched if I start a new Plex docker? Also, is there a way to keep my library how it was? Like the recently added movies and tv shows? Quote Link to comment
MowMdown Posted September 15, 2017 Share Posted September 15, 2017 Just now, jrdnlc said: I currently use that. How can I have it sync back to plex my watch/unwatched if I start a new Plex docker? Also, is there a way to keep my library how it was? Like the recently added movies and tv shows? I just started using it myself, but I know thats what the folk over in r/plex suggest for this type of situation. I would check in with them for a better answer. Quote Link to comment
wgstarks Posted September 16, 2017 Share Posted September 16, 2017 51 minutes ago, jrdnlc said: I currently use that. How can I have it sync back to plex my watch/unwatched if I start a new Plex docker? It's a setting in the trakt channel in the Plex app. You can sync up and/or down. You'll need to have the app running for syncing up though. Quote Link to comment
jrdnlc Posted September 16, 2017 Share Posted September 16, 2017 1 hour ago, wgstarks said: It's a setting in the trakt channel in the Plex app. You can sync up and/or down. You'll need to have the app running for syncing up though. So just set up the new docker and set the trakt settings to up so it can sync back down my watched/unwatched status down to plex? Quote Link to comment
wgstarks Posted September 16, 2017 Share Posted September 16, 2017 1 hour ago, jrdnlc said: So just set up the new docker and set the trakt settings to up so it can sync back down my watched/unwatched status down to plex? Right. IIRC it's labeled as push and pull. Quote Link to comment
jrdnlc Posted September 16, 2017 Share Posted September 16, 2017 10 minutes ago, wgstarks said: Right. IIRC it's labeled as push and pull. So it will be pull then Quote Link to comment
wgstarks Posted September 16, 2017 Share Posted September 16, 2017 6 hours ago, jrdnlc said: So it will be pull then Right. I think you may actually want to activate both though. That way you can keep the online database and any other players in sync. Quote Link to comment
pro9c3 Posted September 18, 2017 Share Posted September 18, 2017 (edited) Since the new update, I keep getting this every time I try to open plex web. Even though I had already set it up over again one time. Also, I can't access the server tab in devices. Says "unavailable" EDIT: Looks like going "back" on my browser takes me back to my server. Still annoying, why's this happening? Edited September 18, 2017 by pro9c3 Quote Link to comment
CHBMB Posted September 18, 2017 Share Posted September 18, 2017 No idea. Not had any other reports of this. Tried using a differnt browser & cleaning out your cache? Quote Link to comment
Addy Posted September 20, 2017 Share Posted September 20, 2017 (edited) hey lads, Has anyone had some random TV shows refuse to play on plex (infinate load) as of recent? I'm not sure what would cause this, the files play if I download them off plex or play the raw file.. It seems to be random on what episodes will and wont play, I've had two in the last week... never had this before that. Any idea's? is there another log the error might be in? - Addy Edited September 20, 2017 by Addy Quote Link to comment
aptalca Posted September 20, 2017 Share Posted September 20, 2017 You can check the plex server log Quote Link to comment
Addy Posted September 20, 2017 Share Posted September 20, 2017 (edited) 2 hours ago, aptalca said: You can check the plex server log I wish! It writes nothing to the log about the playback/error http://prntscr.com/gnd3xy Maybe because it never actually errors it just continually loads forever http://prntscr.com/gnd4lm As I said, its a very select few episodes.. not a huge problem but I hope it doesn't get worse. I also tested the same episode on the android plex app and on my desktop Edited September 20, 2017 by Addy Quote Link to comment
SavellM Posted September 20, 2017 Share Posted September 20, 2017 53 minutes ago, Addy said: I wish! It writes nothing to the log about the playback/error http://prntscr.com/gnd3xy Maybe because it never actually errors it just continually loads forever http://prntscr.com/gnd4lm As I said, its a very select few episodes.. not a huge problem but I hope it doesn't get worse. I also tested the same episode on the android plex app and on my desktop Does it attempt to play, with maybe the spinning thing? I've had it be randomly slow (discussed issues a few pages back) it seems mostly better, but still some episodes take a good 10/15 seconds to actually start. Quote Link to comment
Addy Posted September 20, 2017 Share Posted September 20, 2017 46 minutes ago, SavellM said: Does it attempt to play, with maybe the spinning thing? I've had it be randomly slow (discussed issues a few pages back) it seems mostly better, but still some episodes take a good 10/15 seconds to actually start. Doesn't seem to attempt to play, I left it for 2 hours just as a test, and it just had the loading symbol for the whole time. I attempted to optimize the file overnight, that also failed... its weird! Quote Link to comment
aptalca Posted September 20, 2017 Share Posted September 20, 2017 5 hours ago, Addy said: I wish! It writes nothing to the log about the playback/error http://prntscr.com/gnd3xy Maybe because it never actually errors it just continually loads forever http://prntscr.com/gnd4lm As I said, its a very select few episodes.. not a huge problem but I hope it doesn't get worse. I also tested the same episode on the android plex app and on my desktop That's the docker log. The plex server log is in the config folder 1 Quote Link to comment
Addy Posted September 20, 2017 Share Posted September 20, 2017 (edited) 9 hours ago, aptalca said: That's the docker log. The plex server log is in the config folder Ah, I see errors now, I have no idea what they mean though Sep 21, 2017 08:32:38.005 [0x2b9c4de00700] DEBUG - Completed: [127.0.0.1:49056] 206 PUT /video/:/transcode/session/5e52w3kmyevl4gvm8y0cg3yp/4a6751b6-3346-45e0-9ae3-6e20f007787a/progress?progress=-259959752355.4&size=-22&remaining=-1&vdec_packets=97&vdec_sw_ok=87&speed=0.0&vdec_hw_status=0 (10 live) 0ms 326 bytes Sep 21, 2017 08:32:41.001 [0x2b9c54e00700] ERROR - [Transcoder] [eac3_eae @ 0x155bd00] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-281798a8-c06e-4140-8f1d-4f4abc57799d/EasyAudioEncoder/Convert to WAV (to 8ch or less)/5e52w3kmyevl4gvm8y0cg3yp_8103-1-6.wav' Sep 21, 2017 08:32:41.002 [0x2b9c5fe04700] ERROR - [Transcoder] [eac3_eae @ 0x155bd00] error reading output Sep 21, 2017 08:32:41.003 [0x2b9c54e00700] ERROR - [Transcoder] Error while decoding stream #0:1: Input/output error Sep 21, 2017 08:32:41.004 [0x2b9c4e001700] DEBUG - Auth: We found auth token (xxxxxxxxxxxxxxxxxxxx), enabling token-based authentication. Sep 21, 2017 08:32:41.004 [0x2b9c4e001700] DEBUG - Auth: Came in with the master token, authorization succeeded. Sep 21, 2017 08:32:41.004 [0x2b9c54e00700] DEBUG - Request: [127.0.0.1:49064 (Loopback)] PUT /video/:/transcode/session/5e52w3kmyevl4gvm8y0cg3yp/4a6751b6-3346-45e0-9ae3-6e20f007787a/progress?progress=-259959752355.4&size=-22&remaining=-1&vdec_packets=115&vdec_sw_ok=105&speed=0.0&vdec_hw_status=0 (10 live) Signed-in Token (redacted) Sep 21, 2017 08:32:41.005 [0x2b9c4e001700] DEBUG - Completed: [127.0.0.1:49064] 206 PUT /video/:/transcode/session/5e52w3kmyevl4gvm8y0cg3yp/4a6751b6-3346-45e0-9ae3-6e20f007787a/progress?progress=-259959752355.4&size=-22&remaining=-1&vdec_packets=115&vdec_sw_ok=105&speed=0.0&vdec_hw_status=0 (10 live) 1ms 326 bytes Seems to be a transcoder error, any idea's I found some possible solutions, I set max watches in sysctl to 100000, however no change. Another possible solution I found was to mount the /transcode folder to /tmp, but as far as I can tell, there is no /transcode in the docker config edit: I found this http://prntscr.com/gnozw0 in the plex settings, however the episode im testing with still wont play Edited September 20, 2017 by Addy Quote Link to comment
CHBMB Posted September 20, 2017 Share Posted September 20, 2017 It doesn't matter we haven't specified a /transcode directory in the container, you can add it no problem to the template. 1 Quote Link to comment
Addy Posted September 20, 2017 Share Posted September 20, 2017 2 minutes ago, CHBMB said: It doesn't matter we haven't specified a /transcode directory in the container, you can add it no problem to the template. I found this http://prntscr.com/gnozw0 in the plex settings, however the episode im testing with still wont play (I assume this is the same thing) Quote Link to comment
aptalca Posted September 20, 2017 Share Posted September 20, 2017 10 minutes ago, Addy said: I found this http://prntscr.com/gnozw0 in the plex settings, however the episode im testing with still wont play (I assume this is the same thing) That seems like the plex transcoder is having issues with those files. You should ask on the plex forums. They'll probably ask for the logs and maybe a sample file. Quote Link to comment
Addy Posted September 20, 2017 Share Posted September 20, 2017 (edited) 49 minutes ago, aptalca said: That seems like the plex transcoder is having issues with those files. You should ask on the plex forums. They'll probably ask for the logs and maybe a sample file. I would, but the docker section on the forum boards are greyed out for me... not sure why I havnt logged into the forums before today. EDIT: Found a random forum post saying to rename the codec directory and restart the docker. This seems to have fixed the issue for me. Edited September 21, 2017 by Addy logs attached if anyone would like to look Quote Link to comment
GilbN Posted September 21, 2017 Share Posted September 21, 2017 Is there a place I can find a list of the specific versions? Quote Link to comment
trurl Posted September 22, 2017 Share Posted September 22, 2017 1 hour ago, GilbN said: Is there a place I can find a list of the specific versions? I think that was asked before on this thread, and maybe answered. Quote Link to comment
csabo00 Posted September 22, 2017 Share Posted September 22, 2017 Does anyone know where the time shifting is stored? I have the docker installed on my ssd and i want to map the time shift to a unassigned device as to not wear out my ssd. Quote Link to comment
MowMdown Posted September 22, 2017 Share Posted September 22, 2017 (edited) 22 minutes ago, csabo00 said: Does anyone know where the time shifting is stored? I have the docker installed on my ssd and i want to map the time shift to a unassigned device as to not wear out my ssd. Are you talking about plex's DVR and where it records to? It'll record to whatever library you tell that specific program to. Example: If I want to record a "Show X" I tell Plex to save it to the "TV Show" library and then when it records, it'll save a temp file to a ".grab" folder inside the "TV Show" folder under "/mnt/user/PlexMedia/TV \Show/.grab" Since "/TV Shows" are mapped to "/mnt/user/PlexMedia/TV \Shows" Edited September 22, 2017 by MowMdown Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.