June 24, 20197 yr I have made un updated video guide for setting up this great container. It covers setting up the container, port forwarding and setting up clients on Windows, macOS Linux (ubuntu Mate) and on cell phone - Android and IOS. Hope this guide helps people new to this setting up OpenVPN
June 24, 20197 yr 2 hours ago, SpaceInvaderOne said: I have made un updated video guide for setting up this great container. It covers setting up the container, port forwarding and setting up clients on Windows, macOS Linux (ubuntu Mate) and on cell phone - Android and IOS. Hope this guide helps people new to this setting up OpenVPN Wow great work as always @SpaceInvaderOne
June 25, 20197 yr @SpaceInvaderOne Thank you for the updated Tutorial But how would one solve the following problem: I need to route the openVPN traffic through TCP port 443, otherwise i can't use openVPN. But i already have a letsencrypt docker configured as SpaceInvaderOne explained in his ReserveProxy/Nextcloud guide. So i'm basically forwarding TCP Port 443 -> 1443. How can i use this port with openVPN? On 6/23/2019 at 10:29 PM, Squid said: Been quite awhile since I've used this app (have switched to a different method of connecting remotely), but after you set up the user etc via the admin login, don't you just login locally as the appropriate user and then download the .ovpn file there and then move it to the applicable device? What method are you using? A Wireguard docker would be awesome
June 25, 20197 yr New to UnRaid having issues with the docker here is the log file I get after installing and trying to connect. openvpnlog.txt
June 25, 20197 yr I have this all setup and I have the letsencrypt reverse proxy setup and I tried using one of those to point to my WAN IP and it did not work, I did get it working just using my WAN IP without anything pointing to it and it connected, otherwise it did not work. Is there something I need to setup to use my reverse proxy for that?
June 25, 20197 yr 11 hours ago, suRe said: What method are you using? A Wireguard docker would be awesome Top secret
June 26, 20197 yr Hi All, I've had this docker working fine for a few years now and it seems to have stopped working, presumably since upgrading to 6.7. I can access the web ui, but cannot start the server. I get the following error in the web ui: Quote service failed to start due to unresolved dependencies: set(['user']) service failed to start due to unresolved dependencies: set(['iptables_openvpn']) Service deferred error: IPTablesServiceBase: failed to run iptables-restore [status=2]: ['iptables-restore v1.6.0: Bad IP address ""', '', 'Error occurred at line: 143', "Try `iptables-restore -h' or 'iptables-restore --help' for more information."]: internet/defer:653,sagent/ipts:134,sagent/ipts:51,util/daemon:28,util/daemon:69,application/app:384,scripts/_twistd_unix:258,application/app:396,application/app:311,internet/base:1243,internet/base:1255,internet/epollreactor:235,python/log:103,python/log:86,python/context:122,python/context:85,internet/posixbase:627,internet/posixbase:252,internet/abstract:313,internet/process:312,internet/process:973,internet/process:985,internet/process:350,internet/_baseprocess:52,internet/process:987,internet/_baseprocess:64,svc/pp:142,svc/svcnotify:32,internet/defer:459,internet/defer:567,internet/defer:653,sagent/ipts:134,sagent/ipts:51,util/error:66,util/error:47 service failed to start due to unresolved dependencies: set(['user', 'iptables_live', 'iptables_openvpn']) service failed to start due to unresolved dependencies: set(['iptables_live', 'iptables_openvpn']) Has anyone got any ideas for that? I've read the last few pages of this thread but couldn't see anything relevent. Cheers, Tom
June 26, 20197 yr 3 hours ago, giantkingsquid said: Hi All, I've had this docker working fine for a few years now and it seems to have stopped working, presumably since upgrading to 6.7. I can access the web ui, but cannot start the server. I get the following error in the web ui: Has anyone got any ideas for that? I've read the last few pages of this thread but couldn't see anything relevent. Cheers, Tom Switch to bridge networking and some other changes. See the GitHub or docker hub pages for specific info (links on the first page)
June 26, 20197 yr On 6/25/2019 at 11:34 AM, suRe said: @SpaceInvaderOne Thank you for the updated Tutorial But how would one solve the following problem: I need to route the openVPN traffic through TCP port 443, otherwise i can't use openVPN. But i already have a letsencrypt docker configured as SpaceInvaderOne explained in his ReserveProxy/Nextcloud guide. So i'm basically forwarding TCP Port 443 -> 1443. How can i use this port with openVPN? What method are you using? A Wireguard docker would be awesome Not sure what you mean here. I am running the same docker, only port forwarded is 1194. Just set it to udp port 1194 (it's the default port) Works great with openVPN
June 27, 20197 yr 14 hours ago, ProZac said: Not sure what you mean here. I am running the same docker, only port forwarded is 1194. Just set it to udp port 1194 (it's the default port) Works great with openVPN Yes, it works great in pretty much every country. But i got relatives living in egypt, and apparently egypt seems to be able to block the vpn traffic (started two weeks ago, before it worked perfect with udp 1194). I've read somewhere, that for example people living in china use TCP port 443 for VPN, since only on this port the VPN seem to be working. I hope it is more understandable now.
June 27, 20197 yr 2 hours ago, suRe said: Yes, it works great in pretty much every country. But i got relatives living in egypt, and apparently egypt seems to be able to block the vpn traffic (started two weeks ago, before it worked perfect with udp 1194). I've read somewhere, that for example people living in china use TCP port 443 for VPN, since only on this port the VPN seem to be working. I hope it is more understandable now. How about port 80 tcp? A lot of public wifi also block vpns (mainly block all udp connections as well as tcp except for 80 and 443) so I use port 80 for mine Edited June 27, 20197 yr by aptalca
June 28, 20197 yr Followed the tutorial, but can't get it working... forwarded 1194 to my unraid server on pfsense, added A records so my domain is correct (the same way i've been using it for nextcloud, which works perfectly) but for some reason none of my devices connect. They always timeout. What am i missing? The ip adress in the logging below (removed) matches the domain. Port forwarding should be ok as well, docker is running in bridged mode, priviliged. Added a user like in the video. Should that user match an existing user on the unraid server maybe? Fri Jun 28 10:17:10 2019 OpenVPN 2.4.7 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [LZ4] [PKCS11] [AEAD] built on Apr 25 2019 Fri Jun 28 10:17:10 2019 Windows version 6.2 (Windows 8 or greater) 64bit Fri Jun 28 10:17:10 2019 library versions: OpenSSL 1.1.0j 20 Nov 2018, LZO 2.10 Fri Jun 28 10:17:10 2019 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340 Fri Jun 28 10:17:10 2019 Need hold release from management interface, waiting... Fri Jun 28 10:17:10 2019 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340 Fri Jun 28 10:17:11 2019 MANAGEMENT: CMD 'state on' Fri Jun 28 10:17:11 2019 MANAGEMENT: CMD 'log all on' Fri Jun 28 10:17:11 2019 MANAGEMENT: CMD 'echo all on' Fri Jun 28 10:17:11 2019 MANAGEMENT: CMD 'bytecount 5' Fri Jun 28 10:17:11 2019 MANAGEMENT: CMD 'hold off' Fri Jun 28 10:17:11 2019 MANAGEMENT: CMD 'hold release' Fri Jun 28 10:17:11 2019 WARNING: --ns-cert-type is DEPRECATED. Use --remote-cert-tls instead. Fri Jun 28 10:17:11 2019 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Fri Jun 28 10:17:11 2019 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Fri Jun 28 10:17:11 2019 MANAGEMENT: >STATE:1561709831,RESOLVE,,,,,, Fri Jun 28 10:17:11 2019 TCP/UDP: Preserving recently used remote address: [AF_INET]xxx.xxx.xxx.xxx:1194 Fri Jun 28 10:17:11 2019 Socket Buffers: R=[65536->65536] S=[65536->65536] Fri Jun 28 10:17:11 2019 UDP link local: (not bound) Fri Jun 28 10:17:11 2019 UDP link remote: [AF_INET]xxx.xxx.xxx.xxx:1194 Fri Jun 28 10:17:11 2019 MANAGEMENT: >STATE:1561709831,WAIT,,,,,, Fri Jun 28 10:18:11 2019 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) Fri Jun 28 10:18:11 2019 TLS Error: TLS handshake failed Fri Jun 28 10:18:11 2019 SIGUSR1[soft,tls-error] received, process restarting Fri Jun 28 10:18:11 2019 MANAGEMENT: >STATE:1561709891,RECONNECTING,tls-error,,,,, Fri Jun 28 10:18:11 2019 Restart pause, 5 second(s) ...etc Edited June 28, 20197 yr by jowi
June 28, 20197 yr Ok, i think i know what the 'problem' is... i was testing the connection by starting the openvpn from a windows pc inside my internal network... that won't work probably. Using my iphone, disconnecting it from wifi and using 4G (so, external) i can connect to my unraid machine without any problem using openVPN server. So i guess the only way to test this is with an actual, external machine. Or in other words, is there a way to test this locally, from inside the network? Edited June 29, 20197 yr by jowi
June 30, 20197 yr I am attempting to set this up for the first time. I can access the /admin page, sometimes getting a connection refused, but after waiting a bit it goes through. But when I access the client page through https://unraidipaddress:943/?src=connect or /client or naked, I get "ERR_EMPTY_RESPONSE" [unraidserverip] did not send data. Any suggestions? *NOTE* Followed SpaceIndavaders 2019 guide to set it up. Have it in bridge mode.
July 1, 20197 yr Has anyone had their configuration completely wiped out after updating? If so how do I backup a configuration file to another location that I can load in the event this happens again?
July 1, 20197 yr 5 hours ago, SergeantCC4 said: If so how do I backup a configuration file to another location that I can load in the event this happens again? Edited: Oops, you were referring to backing up the OpenVPN AS configuration files. My bad. Edited July 1, 20197 yr by Hoopster
July 1, 20197 yr Good evening, Tried checking the net for this, but was unable to locate an answer. I'm following SpaceInvader Once's guide for this set up. After I install OpenVPN AS and launch the admin web gui, the default login/password of admin/password is not working for me. It says the password is invalid. Its my first time trying to set it up. Also noticed that port 1194 won't open up as well even though I have it set in my USG with it pointed to my server IP's address. Any assistance is greatly appreciated.
July 2, 20197 yr 15 hours ago, SergeantCC4 said: Has anyone had their configuration completely wiped out after updating? If so how do I backup a configuration file to another location that I can load in the event this happens again? A few updates ago was a completely new layout with tons of changes, but after this, the updates are quite small. I would just use CA backup/restore for the docker and run restore if your config vanishes
July 2, 20197 yr 8 hours ago, Iceman1199 said: Good evening, Tried checking the net for this, but was unable to locate an answer. I'm following SpaceInvader Once's guide for this set up. After I install OpenVPN AS and launch the admin web gui, the default login/password of admin/password is not working for me. It says the password is invalid. Its my first time trying to set it up. Also noticed that port 1194 won't open up as well even though I have it set in my USG with it pointed to my server IP's address. Any assistance is greatly appreciated. Sounds like you might have some old config saved maybe? Default user/pass will always work on fresh install. Try removing docker and docker folder and reinstall. What do you mean when you say port 1194 won't open? You say you can't reach the OpenVPN GUI, what are you trying to do trough port 1194 when you haven't set up the docker?
July 2, 20197 yr 9 hours ago, ProZac said: A few updates ago was a completely new layout with tons of changes, but after this, the updates are quite small. I would just use CA backup/restore for the docker and run restore if your config vanishes It might be a compilation of updating unraid itself to 6.7.2 as well as openvpn to 2.7.4. But that's speculation on my part. I downloaded the backup/restore program but is there not just a configuration file in the openvpn-as folder I can move to back it up occasionally? The Backup/Restore takes the docker offline and I'd like to avoid that if at all possible. Preferably it would be nice to just have an "export configuration" option on the UI like in a router where if moving to a different system, or in the event of failure I can just import the file and I'm good to go.
July 5, 20197 yr Hi, recently I bought a microtik router and found out reading on internet it does not like vpn using udp. Some say they configured it but others say RoS did not officially implement it yet. I followed spaceinvaderone's guide and I am suscribed to PiA. So would like to ask if anyone in the community has successfully setup a RoS router with OpenVPN server since I would like to go this route unless it is not possible.My rb4011 is my main and only router.Rgds
July 6, 20196 yr On 6/26/2019 at 10:44 PM, aptalca said: Switch to bridge networking and some other changes. See the GitHub or docker hub pages for specific info (links on the first page) Thanks very much, got around to making the changes and all is working well. Thanks again.
July 8, 20196 yr On 7/1/2019 at 9:01 AM, G1ng3rK!ng said: I am attempting to set this up for the first time. I can access the /admin page, sometimes getting a connection refused, but after waiting a bit it goes through. But when I access the client page through https://unraidipaddress:943/?src=connect or /client or naked, I get "ERR_EMPTY_RESPONSE" [unraidserverip] did not send data. Any suggestions? *NOTE* Followed SpaceIndavaders 2019 guide to set it up. Have it in bridge mode. Hey, may be take a look at this. Appears to be a bit different to your issue but maybe worth a look.
July 8, 20196 yr Hello, Can anyone help me I have just followed SpaceInvaderOne's Great openvpn video however I would like to find out how would I make my vpn obfuscated so I could use it in contries and networks which block vpns.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.