Stable Releases
Bug reports for stable releases.
2506 reports in this category
-
Hello there is any way to show the temps of the cpu currently doesn't show any reading. tower-diagnostics-20200204-0147.zip
- Closed
- 955 views
-
Running the latest unRAID version 6.82., when i try to create a Windows VM and set the keyboard to Belgium-Dutch an error is shown, see below. This is with the default VNC Video Driver QXL. It seems something is missing. internal error: qemu unexpectedly closed the monitor: 2020-02-02T11:51:14.058703Z qemu-system-x86_64: -vnc 0.0.0.0:0,websocket=5700: could not read keymap file: 'nl-be'
- Minor
- 1364 views
-
Not sure why, but unraid seems to limit jumbo frame sizing to 9000. However, my 10gbe switched network is currently configured for 16k+ frame sizing in accordance to 802.3 Standards for 10gbe NICs. Looking to get that 99% efficiency in my file transfers. Is this a limitation of unraid?
- Annoyance
- 756 views
-
I don't know if this is a bug or intended but even though I don't have Dynamic System Autofan installed, I still have an Airflow section in the lower left corner of my dash. And when I hit the settings wheel, it just loads to a blank page that obviously doesn't exist. Just curious if this is a bug or intended. beast-backup-diagnostics-20200130-2338.zip
- Annoyance
- 2807 views
-
Not sure if this is a bug or what but here goes. NFS shares not being seen by Librelec-Kodi. In the 6.6.7 version I could browse and find nfs shares. After the update to 6.7 I cannot. I downgraded to 6.6.7 and was again able to browse for nfs shares. Re-Upgraded and was then again not able. I manually added the export into kodi and it works, just cannot browse for it. server-diagnostics-20190517-1714.zip
- Solved
- Minor
- 5070 views
-
Unraid 6.7.0 Server name is Server-2, local TLD is set to "home.insanegenius.net". Static IP, DNS entry for server-2.home.insanegenius.net. I am using my own wildcard certificate for *.home.insanegenius.net. CN = *.home.insanegenius.net OU = PositiveSSL Wildcard OU = Domain Control Validated I copy my PEM file to config/ssl/certs/certficate_bundle.pem This server is called server-2.home.insanegenius.net. When I access https://server-2.home.ins
- Solved
- Minor
- 2364 views
-
elysia-diagnostics-20200202-0826.zipI updated from 6.7.2 to 6.8.2. Since the update, after Unraid wakes up from sleep, my eth0 (Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03)) does not function correctly. I can access the GUI and ping fine the Unraid IP address, but using Windows Explorer to access any of the files has issues. I can browse the directories, but writing files to a share just hangs at 0%, and eventually fails with Windows saying it encou
- Annoyance
- 976 views
-
Removed 32GB ram from the system (2x16), now the dashboard shows Maximum size 64 GiB Ram was 64GB, now 32GB.
- Solved
- Minor
- 860 views
-
A strange one I think. If I stop the docker service (in an attempt to enable "Host access to custom networks:"), when I hit Apply, the two paths come up as red (not valid). If I try and re-enter the paths there it can't find cache. In this state the only way to get the docker service running again is stopping the array, editing docker.cfg, setting DOCKER_ENABLED to yes and restarting the array. Any ideas on who to resolve this? Also, any tips on how to enable host acc
- Minor
- 1090 views
-
I am new to Unraid and loving it so far -- except that all shares disappear from time to time (both in the web interface and on the network). After rebooting, everything works again. The bug seems to occur after a certain amount of data has been written to the array. My setup is simple: I have only two devices, I run Sync in a docker, and no VMs. The first attached diagnostics (1655) is from the array after all shares have disappeared, while the second (1704) is from the array after
- Solved
- 919 views
-
There are been several reports of serves crashing on boot after updating to v6.8.1, and they all crash in the same place: /etc/rc.d/rc.M: line 164: modprobe -r $DRIVERS Some examples https://forums.unraid.net/topic/87378-server-fails-to-start-after-update/ https://forums.unraid.net/topic/87435-system-hang-681/ https://forums.unraid.net/topic/87664-sometimes-my-unraid-isn’t-starting-since-last-update/ I just had the same happening to me aft
- Solved
- Minor
- 6716 views
-
Upon upgrade from 6.7.2 to 6.8, the Settings-->VM Manager-->DIsable VM function does not work. The button highlights, but clickign APPLY does not do anything and VMs remain enabled. All VMs were removed from 6.7.2 prior to upgrading. Attached diagnostics. tower-diagnostics-20191216-1209.zip
- Minor
- 3580 views
-
Description This is an issue I had crop up when attempting to override default unraid settings or add additional settings to unraid shares. Basically the samba configuration file is loaded top to bottom in order, and includes are handled inline following the same logic. This allows tiered configuration files to override one another for different settings and creates a robust settings architecture. I want to override settings for several user shares to restrict wireguard clients to spe
- Closed
- 2040 views
-
Under Network Settings, you can hit Add VLAN to add an entry, but after entering a name (in my case: "DNS") and the tag (250), the Apply button is greyed out, and clicking on Done does nothing. This has been going on since at least 6.8.0 (see the link) but I'm posting it here as a bug report since it seems like a legit bug rather than a general question.
- Minor
- 780 views
-
Hello guys. When i do a restart of the unRAID-Server e.g. after an update (6.8.0-6.8.1), the VM (pfSense with a dedicated 4-port NIC, autostart activated) cannot be started. The dedicated NIC is also not showing up: When i try to start the VM manually, this error message occurs: Shutting down the server completely and pushing the power button solves the problem: I would like to be able to do a
- Closed
- 1205 views
-
OK, quite a lengthy summary here, which has been going on for over a year and today I am confident that I have got to the bottom of it. I have previously posted several threads which provide a lot of details for each occasion; But in summary... I have had some serious issues with all versions of UnRAID after 6.5.0 with reliability... The servers concerned are 2 x HP MicroServer G8's, 2 x HP DL380p G8's and today 1 x ML30 G9. Yes... I have repla
- Annoyance
- 4971 views
-
Hi all, this happens on both 6.8.0 and 6.8.1 (can't test previous versions). Bug replication: 1- Have a virtual machine (mine is osx vm with the attached customized xml template - oskey is removed accordingly to forum rules); I'm specifying topology as a qemu:arg value with argument smp, so there's no <topology> line in the xml. All cores are pinned to this vm (16 cores); there's no cpu isolation. 2- Unraid webUI: Settings-->CPU pinning--> CPU
- Minor
- 708 views
-
I am using a 3440x1440 monitor. When I use the Windows Aero Snap feature (where you drag a window to the edge of the screen to "half maximize" it), my total browser window is approximately 1720 pixels wide (Firefox reports a width of 1701 pixels). At this width, the Dashboard UI does not scale well. See attached screenshot. This happens in both Firefox and Edge. Disabling plugins had no effect. All other Unraid UI pages (Main, Shares, Users, Settings, Plugin
- Solved
- Annoyance
- 2494 views
-
VERSION : 6.8.1 ISSUE : UI on Dashboard page - "thumb down" dropdown menu for SMART options cannot see last menu item and cannot scroll down to it. BROWSER : Firefox 72.0.1 (64-bit) I had several CRC errors on my first cache device which displayed the yellow "error" thumb down icon. When I clicked on the error thumb to reveal the Attributes/Capability/Identity and Ignore (or cancel?) menu, the final menu item was not visible even when I scrolled the window down as far as po
- Annoyance
- 1181 views
-
I have two unraid servers and when did the 6.8.0 update both had all the data disk missing as if they were not in the system at all. Both has a HP 468406-B21 sas card and the missing disk are connected to it. 20 disk in all. If I revert back to 6.7.2 all is well. Has support for this controller been dropped? or am I missing something. I have a 3rd system that updated fine to 6.8.0 but it has no sas controller. I have syslog from both 6.7.2 and 6.8.0 tower-diagnostics
- Urgent
- 1746 views
-
Originally posted and was told to remove because my problem was probably not a bug. I have tested two Logitech wireless keyboards and Keyboard and mouse combos and only my older Asus wireless keyboard seems to work now. It's a bug! My Logitech keyboard worked fine tel 6.8.1 Can this be fixed?
- Closed
- Minor
- 1734 views
-
Hi! I have posted about this before, but I did not get an answer and I have found some more information. I have a Huananzhi x79 8D motherboard with 8x8GB of DDR3 ECC memory and 2 x Xeon E5 2670 CPU:s. The unraid dashboard lists my RAM to be 32GB (instead of 64GB). The system information as well: Model: Custom M/B: HUANANZHI X79-8D Version VAA31 - s/n: MB-201903272019 BIOS: American Megatrends Inc. Version 4.6.5. Dated: 03/28/2019 CPU: Intel® Xeon® CPU E5-2670 0 @ 2.
- Annoyance
- 1124 views
-
Hi, for the past few weeks I have noticed an odd behaviour by my server on UNRAID 6.8.0: After a couple of hours of uptime, one sfhs process stays at 100% cpu utilization Network shares become extremely unresponsive after that (unusably unresponsive) Stopping/Starting the Array resolves the high utilization for a few hours, but results in a parity check Disabling folder caching (the plugin) and even uninstalling it does not resolve the issue Please help
- Closed
- Minor
- 1355 views
-
hello, I am quite new to Unraid and only have it for a couple of months in the beginning everything was fine but after a while plex started to crash sometimes, this was only once a week and altough not normal not such a big deal. But since i upgraded to 6.8.0 unraid keeps crashing, i tried a lot of things, added an cache ssd, tried without plex docker on and in safe mode. My pc keeps crashing, sometimes within 6h and sometimes only after 18h or so. I hope it is just a simple thing i did wrong be
- Closed
- 707 views
-
I first noticed this problem in 6.8.1-rc1, updated to 6.8.1 and still persists. Start with an empty /boot/config/ssl/certs directory and USE_SSL set to off, Go to Settings -> Management Access and change "Use SSL/TLS" from "No" to "Auto" The system will generate a self-signed certificate instead of using LetsEncrypt I'm marking this Minor because I haven't seen other reports so it is possible it is unique to my system. But if new LE setups really are
- Closed
- 1030 views
