Jump to content
limetech

Show me your builds!

60 posts in this topic Last Reply

Recommended Posts

Posted (edited)

My fanless UnRaid! Very silent!

unraid.jpg

Edited by EDalcin

Share this post


Link to post
4 hours ago, EDalcin said:

My fanless UnRaid! Very silent!

 

How do you cool the drives?

Share this post


Link to post
On 7/23/2018 at 11:49 AM, trurl said:

 

How do you cool the drives?

 

I didn't. Should I? They are around 40oC, 45oC top.

Share this post


Link to post
3 minutes ago, EDalcin said:

I didn't. Should I? They are around 40oC, 45oC top.

Is that idle? Have you checked the temps during a parity check?

Share this post


Link to post
On 8/13/2018 at 6:44 PM, EDalcin said:

 

I didn't. Should I? They are around 40oC, 45oC top.

That's hot for idle, you'll probably find you'll get temp warnings during a parity check.

Share this post


Link to post

Here is my server, still early days:

server.thumb.jpg.1c0c0b6e5a2c2b50781cabf0e892428f.jpg

 

I plan to have the same hot swap bays on the right as it does on the left.

 

It can hold a total of 14 drives :D 10 HotSwap and 4 internal.

 

Currently have:

1 x WD Red 3TB Internal (Parity)

2 x SanDisk 480GB SSDs Internal (Cache Pool)

2 x WD Red 3TB HotSwap

1 x Toshiba 3TB HotSwap

 

It's running of an Intel i7 4770 and 32GB of RAM.

Share this post


Link to post
On 8/8/2018 at 12:59 AM, tmoran000 said:

work in progress, have 1 more chassis to enter

 

 

@tmoran000 out of curiosity, what rails did you use for the Rosewill Chasis? It looks like it sits about a quarter to half inch off of the standard "U"

Share this post


Link to post
Posted (edited)

Here’s my AIO rig. 34TB Array, 2 480GB cache and a 512 NVME running my vm Win 10 in unassigned devices doing IOMMU passthrough.  I know, I have to reroute the USB front header cable or move to the last 1x PCI-E. SpaceInvaderOne inspired me with the videos.

This is in a cooler master mastercase maker 5. Still have space for 2 more under the shroud by PSU.61E845CD-A189-4294-85D7-5CBE2A35DEA9.thumb.jpeg.83216be41d3fb6053dfa5fcf87fd0c7f.jpeg

 

 

Edited by phbigred

Share this post


Link to post
Posted (edited)
On 9/28/2018 at 2:18 PM, MrPotter said:

@tmoran000 out of curiosity, what rails did you use for the Rosewill Chasis? It looks like it sits about a quarter to half inch off of the standard "U"

I used these"

Rosewill Server Rack Rails/Server Slide Rails/Server Rails, 26" Three Section Ball-Bearing Sliding Server Rail Kit (RSV-R27LX)" , This is the chasis "Rosewill 4U Server Chassis/Server Case/Rackmount Case, Metal Rack Mount Computer Case support with 15 bays & 7 Fans Pre-Installed (RSV-L4500)" .  all parts ordered on Amazon including rack.   Ya its sitting a half U out because I originally intended to run cables out the gap but decided not to and the server is so heavy to lift my self. Just havent gotten any help to correct the gap yet. :)

Edited by tmoran000

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now