Ashe Posted April 21, 2014 Share Posted April 21, 2014 Running unRAID V6b4 (specs as per signature) with 1nr VM - IBs ArchLinux package The ID number of the VM is continuing to increase as shown on the Xen Domains tab, currently at ID 14 although its the only VM. Everything is working perfectly, just wondering why this is happening. Apr 21 07:55:44 Tower kernel: br0: port 2(vif13.0) entered disabled state Apr 21 07:55:44 Tower avahi-daemon[2166]: Withdrawing workstation service for vif13.0. Apr 21 07:55:44 Tower kernel: br0: port 2(vif13.0) entered disabled state Apr 21 07:55:44 Tower kernel: device vif13.0 left promiscuous mode Apr 21 07:55:44 Tower kernel: br0: port 2(vif13.0) entered disabled state Apr 21 07:55:44 Tower logger: /etc/xen/scripts/vif-bridge: offline type_if=vif XENBUS_PATH=backend/vif/13/0 Apr 21 07:55:44 Tower logger: /etc/xen/scripts/vif-bridge: brctl delif br0 vif13.0 failed Apr 21 07:55:44 Tower logger: /etc/xen/scripts/vif-bridge: ifconfig vif13.0 down failed Apr 21 07:55:44 Tower logger: /etc/xen/scripts/vif-bridge: Successful vif-bridge offline for vif13.0, bridge br0. Apr 21 07:55:52 Tower logger: /etc/xen/scripts/vif-bridge: online type_if=vif XENBUS_PATH=backend/vif/14/0 Apr 21 07:55:52 Tower kernel: device vif14.0 entered promiscuous mode Apr 21 07:55:52 Tower logger: /etc/xen/scripts/vif-bridge: Successful vif-bridge online for vif14.0, bridge br0. Apr 21 07:55:52 Tower logger: /etc/xen/scripts/vif-bridge: Writing backend/vif/14/0/hotplug-status connected to xenstore. Apr 21 07:55:53 Tower kernel: br0: port 2(vif14.0) entered forwarding state Quote Link to comment
Frank1940 Posted April 21, 2014 Share Posted April 21, 2014 Are we not able to use the following command on 6b4 to execute mc any more: sudo -u nobody mc When I tried I got this error: root@Media3:/boot# sudo -u nobody mc (mc:13496): GLib-WARNING **: GError set over the top of a previous GError or uninitialized memory. This indicates a bug in someone's code. You must ensure an error is NULL before it's set. The overwriting error message was: Cannot create /.cache/mc directory (mc:13496): GLib-WARNING **: GError set over the top of a previous GError or uninitialized memory. This indicates a bug in someone's code. You must ensure an error is NULL before it's set. The overwriting error message was: Cannot create /.local/share/mc directory Failed to run: Cannot create /.config/mc directory I use "mc" that way so that when I move files they maintain the same permissions as if I wrote them across the network. Or is that not necessary any more? Did you google the first line of the error message. I found many responses about this problem. Quote Link to comment
BobPhoenix Posted April 21, 2014 Share Posted April 21, 2014 Are we not able to use the following command on 6b4 to execute mc any more: sudo -u nobody mc When I tried I got this error: root@Media3:/boot# sudo -u nobody mc (mc:13496): GLib-WARNING **: GError set over the top of a previous GError or uninitialized memory. This indicates a bug in someone's code. You must ensure an error is NULL before it's set. The overwriting error message was: Cannot create /.cache/mc directory (mc:13496): GLib-WARNING **: GError set over the top of a previous GError or uninitialized memory. This indicates a bug in someone's code. You must ensure an error is NULL before it's set. The overwriting error message was: Cannot create /.local/share/mc directory Failed to run: Cannot create /.config/mc directory I use "mc" that way so that when I move files they maintain the same permissions as if I wrote them across the network. Or is that not necessary any more? Did you google the first line of the error message. I found many responses about this problem. Nope not yet just asking to see if anybody else had seen it. Will when I get home tonight and can actually work on it. Quick search for "(mc:13496): GLib-WARNING **: GError set over the top of a previous error or uninitialized" results in a lot (278,000) garbage matches that don't appear likely answers from first page anyway but I'll keep going when I get home. I see google changed it slightly so will force it back to what I pasted and try again. Helps to leave out the "(mc:13496)". Not sure I understand first answer so will have to continue looking. This looks to be the most likely to me http://www.midnight-commander.org/ticket/2900 But user nobody doesn't have a home directory and works on 5.0 unRAID so how come the change? After reading the forwarded error it look like it is related to the errors I get in MC on 5.0 but with 5.0 it doesn't stop it from functioning. If I want to avoid the errors completely I change to /mnt directory and they go away. I will try that in 6.0 tonight and see what I get. I tried my thought but it makes no difference. unRAID 6.0 errors out and will not execute with the sudo to nobody but unRAID 5.0 just displays error messages and continues. I tried to upload graphics of the 5.0 errors but am unable to - at least to this thread. It is possible that unRAID 6.0 has this problem only when running Xen. I have one VM running WHS2011. When it completes the file copy currently in progress in a couple of days I will try this without Xen and in Safemode and see if it is still a problem. Quote Link to comment
thebigslicksuitd Posted April 21, 2014 Share Posted April 21, 2014 I thought that number correlated with the VM instance because when I restart my VMs the number goes up. i.e. 2 VMs, if I restart VM 1 it now shows as ID 3, likewise restarting VM 2 would then be ID 4. If you only have 1 VM then it would appear to be restarting...caveat, I'm still pretty new with this so I could be wrong. Sent from my iPhone using Tapatalk Quote Link to comment
Ashe Posted April 21, 2014 Share Posted April 21, 2014 I thought that number correlated with the VM instance because when I restart my VMs the number goes up. i.e. 2 VMs, if I restart VM 1 it now shows as ID 3, likewise restarting VM 2 would then be ID 4. If you only have 1 VM then it would appear to be restarting...caveat, I'm still pretty new with this so I could be wrong. Sent from my iPhone using Tapatalk That makes sense as to what it is doing. I would assume it should check the number of VMs running and reassign ID1 rather than a new ID number (I'm new to this as well!). Will reboot unRAID and see if it reassigns ID1 Quote Link to comment
lars Posted April 21, 2014 Share Posted April 21, 2014 just out of curiosity. is there actually something like a 'roadmap' for v6 (along the lines b5 - around may, b6 - around june....)? also (i realize it's all beta at this point and things change) what might or might not be part of the next releases? and as we are at it, i noticed also the talked about 5.0.6 never appeared (not that i really miss it), is the v5 put on ice (so to say. it would be understandable to leave it alone and concentrate on getting v6 stable release). anyway, still sticking with 5.0.5 for now, since my sandbox decided to take a leave with mobo failure. just trying to get a rough idea how the planning on v6 is generally. cheers, L Quote Link to comment
pengrus Posted April 21, 2014 Share Posted April 21, 2014 Not sure if this is a good idea or not, but, as root, cd to /, then make the three directories mc is looking for: mkdir .cache .config .local then change to nobody su - nobody and mc Just tried on 6.0b4, works for me! P EDIT: of course, this won't survive a reboot, etc Quote Link to comment
BobPhoenix Posted April 21, 2014 Share Posted April 21, 2014 Not sure if this is a good idea or not, but, as root, cd to /, then make the three directories mc is looking for: mkdir .cache .config .local then change to nobody su - nobody and mc Just tried on 6.0b4, works for me! P EDIT: of course, this won't survive a reboot, etc Thanks that worked. Tried something like that myself and it didn't work but I had forgotten the "cd to /" first. duh! So I was able to use exactly what I referred to "sudo -u nobody mc" which should be the same/similar commands to what you typed. Once I created the directories in the correct spot. Quote Link to comment
NAS Posted April 22, 2014 Share Posted April 22, 2014 Tom, only one more thing to do for SSL to work. Please see http://lime-technology.com/forum/index.php?topic=31619.0 Quote Link to comment
balloob Posted April 22, 2014 Share Posted April 22, 2014 Are any of you using wireless keyboards at the console level by chance? I've had a couple of run instances where all headless access to my server went down so I wanted to have a last resort keyboard on hand to get at the console. I'm using a Logitech wireless w/ unifying receiver. The keyboard works at post in the BIOS, but once Unraid/Xen (running 6b4) loads and I get to the login prompt it is unresponsive. I've tried using my usb2.0 and 3.0 ports, no dice. Thanks. I have this problem too. Googling around shows that it's a kernel improvement that broke unifying communication. For me repeatedly unplugging and plugging into different usb port got the keyboard working after ~10 tries. Quote Link to comment
jbartlett Posted April 22, 2014 Share Posted April 22, 2014 Are any of you using wireless keyboards at the console level by chance? I've had a couple of run instances where all headless access to my server went down so I wanted to have a last resort keyboard on hand to get at the console. I'm using a Logitech wireless w/ unifying receiver. The keyboard works at post in the BIOS, but once Unraid/Xen (running 6b4) loads and I get to the login prompt it is unresponsive. I've tried using my usb2.0 and 3.0 ports, no dice. Thanks. I have this problem too. Googling around shows that it's a kernel improvement that broke unifying communication. For me repeatedly unplugging and plugging into different usb port got the keyboard working after ~10 tries. I've never had any problems with my Logitech. Are you using the standard "Keyboard/mouse" USB ports? They're the ones located where the PS/2 ports are/used to be. Quote Link to comment
bonzi Posted April 23, 2014 Share Posted April 23, 2014 Hi, When I boot the Xen kernel none of my disks are recognized. I'm using a LSI 9201, if I boot the normal unraid kernel then everything is ok lsmod unRAID: Module Size Used by md_mod 31066 13 bridge 66821 0 stp 1413 1 bridge llc 3121 2 stp,bridge coretemp 5334 0 hwmon 1193 1 coretemp acpi_cpufreq 6182 0 kvm_intel 116645 0 kvm 212011 1 kvm_intel i2c_i801 8422 0 i2c_core 16333 1 i2c_i801 ata_piix 22255 0 mpt2sas 142978 14 raid_class 3132 1 mpt2sas e1000e 186097 0 scsi_transport_sas 21198 1 mpt2sas mperf 1075 1 acpi_cpufreq lsmod unRAID Xen: md_mod 31066 0 xen_acpi_processor 3597 0 xen_netback 20777 0 xen_blkback 15336 0 xen_gntalloc 3808 0 xen_gntdev 6056 2 bridge 66821 0 stp 1413 1 bridge llc 3121 2 stp,bridge coretemp 5334 0 hwmon 1193 1 coretemp i2c_i801 8422 0 i2c_core 16333 1 i2c_i801 ata_piix 22255 0 e1000e 186097 0 mpt2sas 142978 0 raid_class 3132 1 mpt2sas scsi_transport_sas 21198 1 mpt2sas mperf 1075 0 Not sure if I am just missing something obvious or if there is something missing which causes my disks to be not recognized. Let me know if there is any further info I can provide. Quote Link to comment
xtrips Posted April 23, 2014 Share Posted April 23, 2014 Hello, I use my Unraid for storage and Sabnzbd only. Nothing more. Is the R.6 beta 4 suitable for my needs? Will I get any improvements considering the fact that it runs on x64? Thanks Quote Link to comment
trurl Posted April 23, 2014 Share Posted April 23, 2014 Hello, I use my Unraid for storage and Sabnzbd only. Nothing more. Is the R.6 beta 4 suitable for my needs? Will I get any improvements considering the fact that it runs on x64? Thanks The main difference is unRAID 6 can host Virtual Machines. If you're not interested in figuring out how to use that capability then stay with 5.0.5 for now. Quote Link to comment
heffe2001 Posted April 23, 2014 Share Posted April 23, 2014 He'll also get the benefit of it being a native x86_64 OS, which some users have reported helped with speeds on their systems. He would need to upgrade his plugins to the 64-bit versions, which I think Sabnzbd has been already.. Quote Link to comment
Dephcon Posted April 23, 2014 Share Posted April 23, 2014 yes, but for such simple needs why use beta software if you don't need to? Quote Link to comment
bkastner Posted April 23, 2014 Share Posted April 23, 2014 While some users will continue to leverage UnRAID plugins in version 6, the majority are looking at moving to virtualization and moving their applications inside a VM, both to improve UnRAID stability as well as to remove the dependency on a single plugin author managing each application. For many this is going to be a large shift in understanding and require the community to pull together to publish clear and concise processes which work as advertised. While those are more tech savvy are willing to push the envelop through this beta period and work through the various issues that arise, for most casual users 6.0 does not make sense this early in the process. We have not even stabilized on the version of Xen being used for virtualization (as hopefully 4.4 will be included in beta 5), so until that happens the guides written so far are not guaranteed to provide consistent results down the road. As a general rule of thumb, if you want to setup UnRAID and just forget about it then stick with the 5.0 series. It will continue to support all your needs today and for the near future. If you want to experiment and "play" with UnRAID then trying 6.0 may be a good choice for you. Personally, I would suggest anyone looking at buying hardware for UnRAID plan for 6.0 and virtualization (whether they think they need it today or not), but from a software perspective, stick with 5.0 unless you really want to dedicate the time to take on that learning curve with the understanding that pieces are still shifting under your feet. Quote Link to comment
vlefevre86 Posted April 23, 2014 Share Posted April 23, 2014 Hi all, I'm not sure it's the right thread, but I'll try. I've just bought a USB dvb-t tuner to use with tvheadend, but I can't find how to pass the device to the VM... Any idea? Envoyé de mon Nexus 5 en utilisant Tapatalk Quote Link to comment
bkastner Posted April 23, 2014 Share Posted April 23, 2014 Hi all, I'm not sure it's the right thread, but I'll try. I've just bought a USB dvb-t tuner to use with tvheadend, but I can't find how to pass the device to the VM... Any idea? Envoyé de mon Nexus 5 en utilisant Tapatalk This should be posted in one of the Virtualization forums, not in the release forum as it has nothing to do specifically with 6.0-beta4 Quote Link to comment
vlefevre86 Posted April 23, 2014 Share Posted April 23, 2014 Hi all, I'm not sure it's the right thread, but I'll try. I've just bought a USB dvb-t tuner to use with tvheadend, but I can't find how to pass the device to the VM... Any idea? Envoyé de mon Nexus 5 en utilisant Tapatalk This should be posted in one of the Virtualization forums, not in the release forum as it has nothing to do specifically with 6.0-beta4 Right, sorry... Envoyé de mon Nexus 5 en utilisant Tapatalk Quote Link to comment
tomorrowsman Posted April 24, 2014 Share Posted April 24, 2014 Do I post bugs here? Quote Link to comment
bkastner Posted April 24, 2014 Share Posted April 24, 2014 Do I post bugs here? If you believe your issue is related to UnRAID 6.0 beta4 then yes, post your issues here. If it's determined to not be a build specific issue then it may get moved to general support forums. Quote Link to comment
tboggie Posted April 24, 2014 Share Posted April 24, 2014 I'm having issues preclearing a 3TB on v6 beta 4. Tried preclearing twice, same error. I had to shutdown my server after waiting almost 48 hours. Is there an existing issue adding new drives (preclearing) on v6? Can i go back to unRAID Server 5.0-beta14, add the new drive(preclear) and once it's done come back to v6 beta4? Quote Link to comment
trurl Posted April 24, 2014 Share Posted April 24, 2014 I'm having issues preclearing a 3TB on v6 beta 4. Tried preclearing twice, same error. I had to shutdown my server after waiting almost 48 hours. Is there an existing issue adding new drives (preclearing) on v6? Can i go back to unRAID Server 5.0-beta14, add the new drive(preclear) and once it's done come back to v6 beta4? Are you using the latest version of the preclear script? See here Not sure why you are conflating adding a drive with preclearing it. They are distinct operations. Or do you really mean adding a drive and letting unRAID clear it? What error exactly are you getting? How much memory do you have? Any addons? It is possible for preclear to run out of memory. See here Quote Link to comment
tboggie Posted April 24, 2014 Share Posted April 24, 2014 I'm having issues preclearing a 3TB on v6 beta 4. Tried preclearing twice, same error. I had to shutdown my server after waiting almost 48 hours. Is there an existing issue adding new drives (preclearing) on v6? Can i go back to unRAID Server 5.0-beta14, add the new drive(preclear) and once it's done come back to v6 beta4? Are you using the latest version of the preclear script? See here Not sure why you are conflating adding a drive with preclearing it. They are distinct operations. Or do you really mean adding a drive and letting unRAID clear it? What error exactly are you getting? How much memory do you have? Any addons? It is possible for preclear to run out of memory. See here Yes you're right, i meant adding a drive and letting unRAID clear it. I've not tried using the preclear script Cant post a log now, could do later today but here is a quick screenshot i took this morning http://i.imgur.com/rLcZRyd.jpg 4GB ram and no addons Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.