dabl Posted June 17, 2020 Share Posted June 17, 2020 (edited) 39 minutes ago, Mr_Jay84 said: Is the anyway of moving the IMPI summary to the lower part of the Dashboard page? This has been requested by multiple people in this thread. One user came up with a client side browser script and posted the recipe but of course that (and presumably the plugin to process it) would need to be installed on all browser clients that access the server to be effective on them. I suppose making use of typical browser plugin syncing features would make copying the initial install to other clients using the same browser easy though. Edited June 17, 2020 by dabl Quote Link to comment
cinereus Posted June 19, 2020 Share Posted June 19, 2020 On 6/17/2020 at 10:29 PM, Mr_Jay84 said: Is the anyway of moving the IMPI summary to the lower part of the Dashboard page? https://forums.unraid.net/topic/38108-plugin-ipmi-for-unraid-61/page/50/?tab=comments#comment-854913 1 Quote Link to comment
DarkMan83 Posted July 4, 2020 Share Posted July 4, 2020 Is this still worked on? How to set driver to use for sensors? I have to use the LAN_2_0 instead of LAN.... Quote Link to comment
shaunmccloud Posted July 8, 2020 Share Posted July 8, 2020 Is there a way to display more than 4 sensors in the footer? I'd like to display my array fan & add in card fan in addition to my CPU fans. But adding the CPU temps & fan temps uses the 4 the GUI shows. Quote Link to comment
craigr Posted July 11, 2020 Share Posted July 11, 2020 On 5/11/2020 at 9:25 AM, cinereus said: I just wrote a basic greasemonkey script to do this: // ==UserScript== // @name Move IMPI elements to bottom of unRAID dashboard // @include http://YOURHOSTNAMEORIP/Dashboard // @grant none // ==/UserScript== var container = document.querySelector ("div.content.shift"); var title = container.querySelector ("div#title"); var table = container.querySelector ("table#tblIPMIDash"); //-- Move IMPI elements to bottom container.appendChild (title); container.appendChild (table); I'll look forward to this being in the new release as I don't think it will work inside of Chrome? Thanks for the effort, it is much appreciated. craigr Quote Link to comment
cinereus Posted July 11, 2020 Share Posted July 11, 2020 9 hours ago, craigr said: I'll look forward to this being in the new release as I don't think it will work inside of Chrome? Thanks for the effort, it is much appreciated. craigr What do you mean? All Greasemonkey scripts work in Chrome. 1 Quote Link to comment
craigr Posted July 11, 2020 Share Posted July 11, 2020 2 hours ago, cinereus said: What do you mean? All Greasemonkey scripts work in Chrome. Oh, well cool! I'll give it a try soon than. Thanks again, Craig Quote Link to comment
Energen Posted July 11, 2020 Share Posted July 11, 2020 (edited) Just a little tip here if you don't want to have to load Greasemonkey in all your browsers... You can use Config File Editor from tools to add the script in automatically without the need for any browser addons.. just a little nicer way of doing it where you don't have to think about it. You'll just have to most likely remember to change it every time Unraid is updated or the page gets reverted back to default. Here's what I did........ edit the file /usr/local/emhttp/webGui/include/DefaultPageLayout.php All the way at the bottom before the closing </body> tag I added cinereus's script: </script> <script> var container = document.querySelector ("div.content.shift"); var title = container.querySelector ("div#title"); var table = container.querySelector ("table#tblIPMIDash"); //-- Move IMPI elements to bottom //-- container.appendChild (title); //-- container.appendChild (table); </script> </body> </html> EDIT -- Actually modifying that page messed up the layout of the Apps page a little bit.. but it's a starting point. Edited July 11, 2020 by Energen 1 Quote Link to comment
craigr Posted July 12, 2020 Share Posted July 12, 2020 (edited) On 7/11/2020 at 5:58 AM, cinereus said: What do you mean? All Greasemonkey scripts work in Chrome. I used tampermonkey to install the script on my primary desktop running Chrome. Thanks! craigr Edited July 12, 2020 by craigr 1 Quote Link to comment
BVD Posted July 13, 2020 Share Posted July 13, 2020 (edited) FYI the main plugin from CA for IPMI tool is pulling from a repository that only has the older versions of ipmitool/freeipmi/etc - looks like they're in a separate repository from the source, and for whatever reason, the source isn't updating the unRAID-plugins repository. I only figured it out after finding the (awesome) dell updates that were made earlier this year and wondering why I wasn't seeing that on the MB dropdown list. Thanks for all you do! EDIT: Might be this - looks like the libtool archive may've been corrupted in upload: root:~# upgradepkg --install-new ./libtool-2.4.6-x86_64-13.txz +============================================================================== | Installing new package ./libtool-2.4.6-x86_64-13.txz +============================================================================== Verifying package libtool-2.4.6-x86_64-13.txz. xz: (stdin): File format not recognized Unable to install ./libtool-2.4.6-x86_64-13.txz: tar archive is corrupt (tar returned error code 2) Edited July 13, 2020 by BVD possible cause found Quote Link to comment
BVD Posted July 14, 2020 Share Posted July 14, 2020 Could we also possibly get a new update to the plugin, to reflect the Dell changes you'd made to the source several months back by chance? I'm using the source to compile my own (as soon as I get my vm relocated), but it'd be helpful to include it as part of the built in CA updates packages. Thanks again! Quote Link to comment
carnivorebrah Posted July 26, 2020 Share Posted July 26, 2020 Has anyone gotten the fan control to work successfully with an X9 board? I have an X9DRL-iF board w/ two Arctic 12 semi-passive coolers. I updated the thresholds in the config for both FAN1 and FAN2 to 0, 75, 150, and set IPMI fan mode to "Standard", but since my fans intentionally stop spinning and hit 0 RPM, the IPMI causes the fans go back to 100% every time they stop spinning. So, I tried to enabled fan control in the plugin. However, this just causes the IPMI fan mode setting to change to "Full", and the fans sit at full speed. I tried changing the fan control options, resetting BMC, shutdown with power cord pulled for a few minutes, etc. Any thing else I can try? Quote Link to comment
JorgeB Posted July 29, 2020 Share Posted July 29, 2020 I've now confirmed this plugin is interfering with pool device spin down, when possible please take a look at this: https://forums.unraid.net/bug-reports/prereleases/690-beta22-no-spin-down-of-pool-hdds-r976/?do=findComment&comment=10202 Quote Link to comment
dmacias Posted July 30, 2020 Author Share Posted July 30, 2020 19 hours ago, johnnie.black said: I've now confirmed this plugin is interfering with pool device spin down, when possible please take a look at this: https://forums.unraid.net/bug-reports/prereleases/690-beta22-no-spin-down-of-pool-hdds-r976/?do=findComment&comment=10202 I assume you're using the fancontrol script. It shouldn't spin up any drives. It only checks the temp on the drive if it's not in standy. Do you have an idea how its affecting the spin down? smartctl -A -n standby /dev/sdX 2>/dev/null| grep -m 1 -i Temperature_Cel | awk '{print $10}' Quote Link to comment
JorgeB Posted July 30, 2020 Share Posted July 30, 2020 3 hours ago, dmacias said: Do you have an idea how its affecting the spin down? I don't know why but it is this command, ran it on a pool device and it immediately spun up and started showing the bogus temp in the GUI: Quote Link to comment
JorgeB Posted July 30, 2020 Share Posted July 30, 2020 Note: I also see some read activity right after running it, so Unraid it's interpreting this as the disk being accessed: Quote Link to comment
JorgeB Posted July 30, 2020 Share Posted July 30, 2020 5 minutes ago, johnnie.black said: and it immediately spun up Correction, like mentioned in the other thread the disk doesn't spin up, but the GUI stops showing the correct status, and once it spins up due to being accessed this command does prevents the disk from spinning down again. Quote Link to comment
dmacias Posted July 30, 2020 Author Share Posted July 30, 2020 12 hours ago, johnnie.black said: Correction, like mentioned in the other thread the disk doesn't spin up, but the GUI stops showing the correct status, and once it spins up due to being accessed this command does prevents the disk from spinning down again. OK thanks. I had used smartctl instead of hdparm because I seem to remember hdparm would spin up disks but after reading through the thread I see that it messes with kernel disk statistics too. Smartctl must do the same. I also see that disks are polled every second by emhttp which should be more than enough of an interval for fan control. So I'll use already parsed data from emhttp for array disks and smartcrl for unassigned. Should fix the problem. 1 Quote Link to comment
craigr Posted August 1, 2020 Share Posted August 1, 2020 So unfortunately my Tampermonkey script makes other parts uf the unRAID GUI unusable :( So I have had to disable it. craigr Quote Link to comment
cinereus Posted August 3, 2020 Share Posted August 3, 2020 On 8/1/2020 at 5:31 PM, craigr said: So unfortunately my Tampermonkey script makes other parts uf the unRAID GUI unusable :( So I have had to disable it. craigr If it's affecting other pages, just change the script settings. Quote Link to comment
trott Posted August 6, 2020 Share Posted August 6, 2020 Can we have different HDD groups to control the fan speed instead of only the max temp Quote Link to comment
trott Posted August 10, 2020 Share Posted August 10, 2020 On 7/31/2020 at 4:28 AM, dmacias said: OK thanks. I had used smartctl instead of hdparm because I seem to remember hdparm would spin up disks but after reading through the thread I see that it messes with kernel disk statistics too. Smartctl must do the same. I also see that disks are polled every second by emhttp which should be more than enough of an interval for fan control. So I'll use already parsed data from emhttp for array disks and smartcrl for unassigned. Should fix the problem. Hi, when the plugin will be updated to use the data from emhttp? Quote Link to comment
Phatjz Posted August 19, 2020 Share Posted August 19, 2020 Howdy All, Where do i start i have a super micro currently using IPMI i had the fan speed control working then out of no were once i booted up the server the options have dissapeared and i can't control the fans and it's not showing my cpu temps, if anyone could assist would be great, Only sensor showing is HDD Temp Quote Link to comment
dmacias Posted August 25, 2020 Author Share Posted August 25, 2020 Correction, like mentioned in the other thread the disk doesn't spin up, but the GUI stops showing the correct status, and once it spins up due to being accessed this command does prevents the disk from spinning down again. Should be fixed now. Only none array or non ud disks are polled with smartctl 1 Quote Link to comment
dmacias Posted August 25, 2020 Author Share Posted August 25, 2020 Hi, when the plugin will be updated to use the data from emhttp?Should work now Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.