carlos28355 Posted January 23, 2018 Share Posted January 23, 2018 Quote ErrorWarningSystemArrayLogin [s6-init] making user provided files available at /var/run/s6/etc...exited 0.[s6-init] ensuring user provided files have correct perms...exited 0.[fix-attrs.d] applying ownership & permissions fixes...[fix-attrs.d] done.[cont-init.d] executing container initialization scripts...[cont-init.d] 10-adduser: executing...-------------------------------------_ ()| | ___ _ __| | / __| | | / \| | \__ \ | | | () ||_| |___/ |_| \__/Brought to you by linuxserver.ioWe gratefully accept donations at:https://www.linuxserver.io/donations/-------------------------------------GID/UID-------------------------------------User uid: 99User gid: 100-------------------------------------[cont-init.d] 10-adduser: exited 0.[cont-init.d] 30-dbus: executing...[cont-init.d] 30-dbus: exited 0.[cont-init.d] 40-chown-files: executing...[cont-init.d] 40-chown-files: exited 0.[cont-init.d] 50-plex-update: executing...No update required[cont-init.d] 50-plex-update: exited 0.[cont-init.d] done.[services.d] starting servicesStarting dbus-daemonStarting Plex Media Server.[services.d] done.dbus[281]: [system] org.freedesktop.DBus.Error.AccessDenied: Failed to set fd limit to 65536: Operation not permittedStarting Avahi daemonFound user 'avahi' (UID 106) and group 'avahi' (GID 107).Successfully dropped root privileges.avahi-daemon 0.6.32-rc starting up.No service file found in /etc/avahi/services.*** WARNING: Detected another IPv4 mDNS stack running on this host. This makes mDNS unreliable and is thus not recommended. ***socket() failed: Address family not supported by protocolFailed to create IPv6 socket, proceeding in IPv4 only modesocket() failed: Address family not supported by protocolJoining mDNS multicast group on interface docker0.IPv4 with address 172.17.0.1.New relevant interface docker0.IPv4 for mDNS.Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.199.New relevant interface eth0.IPv4 for mDNS.Network interface enumeration completed.Registering new address record for 172.17.0.1 on docker0.IPv4.Registering new address record for 192.168.1.199 on eth0.IPv4.Server startup complete. Host name is Whoshouse.local. Local service cookie is 928197164. Quote Link to comment
carlos28355 Posted January 23, 2018 Share Posted January 23, 2018 hopefully this tells you something but I wonder if the logs would clear out after having to re-setup the docker? Quote Link to comment
trurl Posted January 23, 2018 Share Posted January 23, 2018 No that is not at all what I am asking for. Try this link https://lime-technology.com/forums/topic/57181-real-docker-faq/?tab=comments#comment-564345 What I want looks like this: It should be a single command line (wrapped), the docker run command. Quote Link to comment
carlos28355 Posted January 23, 2018 Share Posted January 23, 2018 6 hours ago, trurl said: No that is not at all what I am asking for. Try this link https://lime-technology.com/forums/topic/57181-real-docker-faq/?tab=comments#comment-564345 What I want looks like this: It should be a single command line (wrapped), the docker run command. ok i understand sorry. heres what i get when i try to add television Stopping container: plex Successfully stopped container 'plex' Removing container: plex Successfully removed container 'plex' Command: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="plex" --net="host" -e TZ="America/Phoenix" -e HOST_OS="unRAID" -e "PUID"="99" -e "PGID"="100" -e "VERSION"="latest" -v "/mnt/user/My Movies/":"/media":rw -v "/mnt/user/TV/":"/media":rw -v "/mnt/user/appdata/plex":"/config":rw linuxserver/plex /usr/bin/docker: Error response from daemon: Duplicate mount point '/media'. See '/usr/bin/docker run --help'. The command failed. Quote Link to comment
wgstarks Posted January 23, 2018 Share Posted January 23, 2018 5 minutes ago, carlos28355 said: Duplicate mount point '/media'. I believe this is your problem. You need to use something like /media/movies and /media/tvshows. 1 Quote Link to comment
trurl Posted January 23, 2018 Share Posted January 23, 2018 As wgstarks said. Do you have any other working dockers? You really need to understand volume mapping or you will continue to have these problems setting up dockers. Browse the other posts in that Docker FAQ thread I linked earlier. Quote Link to comment
carlos28355 Posted January 23, 2018 Share Posted January 23, 2018 1 hour ago, wgstarks said: I believe this is your problem. You need to use something like /media/movies and /media/tvshows. i think you are correct thanks. I just assumed it worked for movies and tv would be media also so figured it would work. thanks! 1 hour ago, trurl said: As wgstarks said. Do you have any other working dockers? You really need to understand volume mapping or you will continue to have these problems setting up dockers. Browse the other posts in that Docker FAQ thread I linked earlier. I do not have any other dockers. not sure i need any others that i know of? but you are correct i really do need to understand the volume mapping. thanks again! Quote Link to comment
4ntech Posted January 24, 2018 Share Posted January 24, 2018 (edited) Hello, I need some help with my Plex docker everything was working fine and I made a stupid mistake, I changed network type to static IP and to make matter worse I add a port number to it 192.168.1.11:32400 and now docker is missing. I switched to advance view and it shows the orphan image. Can someone please help me. I also have a backup of APPDATA folder but it also contains other dockers which are working fine, not sure how to restore just Plex docker. Edited January 24, 2018 by unraidnewbie Quote Link to comment
Squid Posted January 24, 2018 Share Posted January 24, 2018 1 hour ago, unraidnewbie said: Hello, I need some help with my Plex docker everything was working fine and I made a stupid mistake, I changed network type to static IP and to make matter worse I add a port number to it 192.168.1.11:32400 and now docker is missing. I switched to advance view and it shows the orphan image. Can someone please help me. I also have a backup of APPDATA folder but it also contains other dockers which are working fine, not sure how to restore just Plex docker. Delete the orphaned image. Reinstall Plex via the Apps Tab, Previous Apps, and then undo the changes you made. Quote Link to comment
4ntech Posted January 24, 2018 Share Posted January 24, 2018 4 minutes ago, Squid said: Delete the orphaned image. Reinstall Plex via the Apps Tab, Previous Apps, and then undo the changes you made. Will it restore all paths for movies, pictures, etc.? and what about setting with Plex server such as database? Thank you Quote Link to comment
Squid Posted January 24, 2018 Share Posted January 24, 2018 Previous Apps section reinstalls with the last changes you made to the template. So yes. Just undo what you did Quote Link to comment
4ntech Posted January 24, 2018 Share Posted January 24, 2018 44 minutes ago, Squid said: Previous Apps section reinstalls with the last changes you made to the template. So yes. Just undo what you did Perfect thank you so much. BTW how do I assign static IP? I inputted 192.168.1.11 but plex server did not load? Quote Link to comment
Squid Posted January 24, 2018 Share Posted January 24, 2018 Perfect thank you so much. BTW how do I assign static IP? I inputted 192.168.1.11 but plex server did not load?Personally, I've never understood why you ever need to assign any container a specific IP but you would need to surf the 6.4 thread on how you do this Quote Link to comment
4ntech Posted January 24, 2018 Share Posted January 24, 2018 12 minutes ago, Squid said: 29 minutes ago, unraidnewbie said: Perfect thank you so much. BTW how do I assign static IP? I inputted 192.168.1.11 but plex server did not load? Personally, I've never understood why you ever need to assign any container a specific IP but you would need to surf the 6.4 thread on how you do this Ok thx Quote Link to comment
carlos28355 Posted January 25, 2018 Share Posted January 25, 2018 i rebooted my unraid server and now i cant stream. If i try to stream through the browser I get "shaka1001" network error if i try from apple tv it says cannot create a playback session. from the roku it says "not enough bandwith for any playback..." Quote ErrorWarningSystemArrayLogin [s6-init] making user provided files available at /var/run/s6/etc...exited 0.[s6-init] ensuring user provided files have correct perms...exited 0.[fix-attrs.d] applying ownership & permissions fixes...[fix-attrs.d] done.[cont-init.d] executing container initialization scripts...[cont-init.d] 10-adduser: executing...-------------------------------------_ ()| | ___ _ __| | / __| | | / \| | \__ \ | | | () ||_| |___/ |_| \__/Brought to you by linuxserver.ioWe gratefully accept donations at:https://www.linuxserver.io/donations/-------------------------------------GID/UID-------------------------------------User uid: 99User gid: 100-------------------------------------[cont-init.d] 10-adduser: exited 0.[cont-init.d] 30-dbus: executing...[cont-init.d] 30-dbus: exited 0.[cont-init.d] 40-chown-files: executing...[cont-init.d] 40-chown-files: exited 0.[cont-init.d] 50-plex-update: executing...No update required[cont-init.d] 50-plex-update: exited 0.[cont-init.d] done.[services.d] starting servicesStarting dbus-daemonStarting Plex Media Server.[services.d] done.dbus[278]: [system] org.freedesktop.DBus.Error.AccessDenied: Failed to set fd limit to 65536: Operation not permittedStarting Avahi daemonFound user 'avahi' (UID 106) and group 'avahi' (GID 107).Successfully dropped root privileges.avahi-daemon 0.6.32-rc starting up.No service file found in /etc/avahi/services.*** WARNING: Detected another IPv4 mDNS stack running on this host. This makes mDNS unreliable and is thus not recommended. ***socket() failed: Address family not supported by protocolFailed to create IPv6 socket, proceeding in IPv4 only modesocket() failed: Address family not supported by protocolJoining mDNS multicast group on interface docker0.IPv4 with address 172.17.0.1.New relevant interface docker0.IPv4 for mDNS.Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.199.New relevant interface eth0.IPv4 for mDNS.Network interface enumeration completed.Registering new address record for 172.17.0.1 on docker0.IPv4.Registering new address record for 192.168.1.199 on eth0.IPv4.Server startup complete. Host name is Whoshouse.local. Local service cookie is 3852812910.__code__:703: FutureWarning: The behavior of this method will change in future versions. Use specific 'len(elem)' or 'elem is not None' test instead.Got SIGTERM, quitting.Leaving mDNS multicast group on interface docker0.IPv4 with address 172.17.0.1.Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.199.avahi-daemon 0.6.32-rc exiting.[cont-finish.d] executing container finish scripts...[cont-finish.d] done.[s6-finish] syncing disks.Critical: libusb_init failed[s6-finish] sending all processes the TERM signal.[s6-finish] sending all processes the KILL signal and exiting.[s6-init] making user provided files available at /var/run/s6/etc...exited 0.[s6-init] ensuring user provided files have correct perms...exited 0.[fix-attrs.d] applying ownership & permissions fixes...[fix-attrs.d] done.[cont-init.d] executing container initialization scripts...[cont-init.d] 10-adduser: executing...usermod: no changes-------------------------------------_ ()| | ___ _ __| | / __| | | / \| | \__ \ | | | () ||_| |___/ |_| \__/Brought to you by linuxserver.ioWe gratefully accept donations at:https://www.linuxserver.io/donations/-------------------------------------GID/UID-------------------------------------User uid: 99User gid: 100-------------------------------------[cont-init.d] 10-adduser: exited 0.[cont-init.d] 30-dbus: executing...[cont-init.d] 30-dbus: exited 0.[cont-init.d] 40-chown-files: executing...[cont-init.d] 40-chown-files: exited 0.[cont-init.d] 50-plex-update: executing...No update required[cont-init.d] 50-plex-update: exited 0.[cont-init.d] done.[services.d] starting servicesStarting Plex Media Server.Starting dbus-daemon[services.d] done.dbus[272]: [system] org.freedesktop.DBus.Error.AccessDenied: Failed to set fd limit to 65536: Operation not permittedStarting Avahi daemonFound user 'avahi' (UID 106) and group 'avahi' (GID 107).Successfully dropped root privileges.avahi-daemon 0.6.32-rc starting up.No service file found in /etc/avahi/services.*** WARNING: Detected another IPv4 mDNS stack running on this host. This makes mDNS unreliable and is thus not recommended. ***socket() failed: Address family not supported by protocolFailed to create IPv6 socket, proceeding in IPv4 only modesocket() failed: Address family not supported by protocolJoining mDNS multicast group on interface docker0.IPv4 with address 172.17.0.1.New relevant interface docker0.IPv4 for mDNS.Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.199.New relevant interface eth0.IPv4 for mDNS.Network interface enumeration completed.Registering new address record for 172.17.0.1 on docker0.IPv4.Registering new address record for 192.168.1.199 on eth0.IPv4.Server startup complete. Host name is Whoshouse.local. Local service cookie is 1531104062.Got SIGTERM, quitting.Leaving mDNS multicast group on interface docker0.IPv4 with address 172.17.0.1.Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.199.avahi-daemon 0.6.32-rc exiting.[cont-finish.d] executing container finish scripts...Critical: libusb_init failed[cont-finish.d] done.[s6-finish] syncing disks.[s6-finish] sending all processes the TERM signal.[s6-finish] sending all processes the KILL signal and exiting.[s6-init] making user provided files available at /var/run/s6/etc...exited 0.[s6-init] ensuring user provided files have correct perms...exited 0.[fix-attrs.d] applying ownership & permissions fixes...[fix-attrs.d] done.[cont-init.d] executing container initialization scripts...[cont-init.d] 10-adduser: executing...usermod: no changes-------------------------------------_ ()| | ___ _ __| | / __| | | / \| | \__ \ | | | () ||_| |___/ |_| \__/Brought to you by linuxserver.ioWe gratefully accept donations at:https://www.linuxserver.io/donations/-------------------------------------GID/UID-------------------------------------User uid: 99User gid: 100-------------------------------------[cont-init.d] 10-adduser: exited 0.[cont-init.d] 30-dbus: executing...[cont-init.d] 30-dbus: exited 0.[cont-init.d] 40-chown-files: executing...[cont-init.d] 40-chown-files: exited 0.[cont-init.d] 50-plex-update: executing...No update required[cont-init.d] 50-plex-update: exited 0.[cont-init.d] done.[services.d] starting servicesStarting Plex Media Server.Starting dbus-daemon[services.d] done.dbus[280]: [system] org.freedesktop.DBus.Error.AccessDenied: Failed to set fd limit to 65536: Operation not permittedStarting Avahi daemonFound user 'avahi' (UID 106) and group 'avahi' (GID 107).Successfully dropped root privileges.avahi-daemon 0.6.32-rc starting up.No service file found in /etc/avahi/services.*** WARNING: Detected another IPv4 mDNS stack running on this host. This makes mDNS unreliable and is thus not recommended. ***socket() failed: Address family not supported by protocolFailed to create IPv6 socket, proceeding in IPv4 only modesocket() failed: Address family not supported by protocolJoining mDNS multicast group on interface docker0.IPv4 with address 172.17.0.1.New relevant interface docker0.IPv4 for mDNS.Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.199.New relevant interface eth0.IPv4 for mDNS.Network interface enumeration completed.Registering new address record for 172.17.0.1 on docker0.IPv4.Registering new address record for 192.168.1.199 on eth0.IPv4.Server startup complete. Host name is Whoshouse.local. Local service cookie is 1510079016.Connection to 184.105.148.104 closed by remote host. Quote Link to comment
carlos28355 Posted January 27, 2018 Share Posted January 27, 2018 i didnt clear appdata folder or anything but i removed the docker and set back up but same issue Quote Link to comment
deuxcolors Posted January 27, 2018 Share Posted January 27, 2018 I'm having the exact same issue as Carlos28355. I tried rebuilding the docker, but the issue persists. I think this might be a Plex issue, and not LS.IO issue, but I'm at work and can't troubleshoot (and I have a wife and two kids bugging me about it...) Quote Link to comment
Dimtar Posted January 27, 2018 Share Posted January 27, 2018 @carlos28355 I read this on the Plex Roku forum: Quote My fix for this issue on Roku 3 client and a WD NAS Plex server was to go to the web page, Settings -> Debug -> uncheck Direct Play, and then reboot the Plex client app on Roku. Quote Link to comment
carlos28355 Posted January 27, 2018 Share Posted January 27, 2018 6 hours ago, deuxcolors said: I'm having the exact same issue as Carlos28355. I tried rebuilding the docker, but the issue persists. I think this might be a Plex issue, and not LS.IO issue, but I'm at work and can't troubleshoot (and I have a wife and two kids bugging me about it...) ok was just weird it happened right after i rebooted the server Quote Link to comment
carlos28355 Posted January 27, 2018 Share Posted January 27, 2018 (edited) 5 hours ago, Dimtar said: @carlos28355 I read this on the Plex Roku forum: ill try it and report back thanks Tried it and it gives a different message now but still cant stream...ill look outside LS.IO and more into plex and see if I find an answer thanks Edited January 27, 2018 by carlos28355 Quote Link to comment
pro9c3 Posted January 28, 2018 Share Posted January 28, 2018 (edited) I'm having the same issue as carlos and a few others just with the last update or two. large files fail to play, not sure what to do. i hadn't messed with any settings. btw, these same files worked just fine before.. Update: I've narrowed down my issue to only be affected by files with EAC3 audio.. everything else such as DTS plays just fine. Can someone else replicate this issue? Any solution? Final Update: https://forums.plex.tv/discussion/288630/any-video-with-eac3-audio-fails-to-play This was the solution for me. Quote Delete codecs folder: \plex\Library\Application Support\Plex Media Server\Codecs Restart the docker image and it fixes the issue Edited January 28, 2018 by pro9c3 Quote Link to comment
deuxcolors Posted January 28, 2018 Share Posted January 28, 2018 I went back to the old method of adding /transcode path to /tmp And added /tmp to /tmp Issue resolved it seems Quote Link to comment
carlos28355 Posted January 29, 2018 Share Posted January 29, 2018 23 hours ago, pro9c3 said: I'm having the same issue as carlos and a few others just with the last update or two. large files fail to play, not sure what to do. i hadn't messed with any settings. btw, these same files worked just fine before.. Update: I've narrowed down my issue to only be affected by files with EAC3 audio.. everything else such as DTS plays just fine. Can someone else replicate this issue? Any solution? Final Update: https://forums.plex.tv/discussion/288630/any-video-with-eac3-audio-fails-to-play This was the solution for me. damn this didnt work for me 16 hours ago, deuxcolors said: I went back to the old method of adding /transcode path to /tmp And added /tmp to /tmp Issue resolved it seems this is over my head. can you provide more detail please? thank you! Quote Link to comment
Hoopster Posted January 29, 2018 Share Posted January 29, 2018 (edited) On 1/28/2018 at 9:06 PM, carlos28355 said: On 1/28/2018 at 4:21 AM, deuxcolors said: I went back to the old method of adding /transcode path to /tmp And added /tmp to /tmp Issue resolved it seems this is over my head. can you provide more detail please? thank you! deuxcolors is referring to mapping a container path to a host path for transcoding purposes and then specifying the container path in the Plex server transcoder settings. /tmp is RAM on the unRAID server. He mapped /tmp to /tmp. In my case I have /transcode mapped to /tmp but the concept is the same. Edit Plex docker settings and do the following: 1 - Edit the appropriate host path variable (or add a new one) for your transcode mapping. 2 - Enter the desired container path name (I used /transcode, deuxcolors used /tmp) and enter a host path of /tmp if you want to transcode to RAM. 3 - Click Save button in Edit Configuration. 4 - Click Apply button in Docker Edit screen. 5. Open Plex docker WebUI 6. Click on Settings 7. Select Server Settings 8. Select Transcoder 9. Enter the name of the container path you specified in step two as the Transcoder temporary directory. deuxcolors mapped /tmp to /tmp so his entry here is /tmp This tells Plex to transcode videos to the /tmp directory on the host which is in RAM. This could also be done to a directory on your cache drive by specifying the Host Path as something like /mnt/user/cache/plex/transcode in step two. The important thing is that in Plex transcode settings you specify the name of the Container path variable as the Transcoder location. 10. Click Save Changes button Edited February 3, 2018 by Hoopster 1 Quote Link to comment
deuxcolors Posted January 29, 2018 Share Posted January 29, 2018 Sorry for the late reply. Quick correction. I did both: -I already had /transcode set to the cache drive, and I remapped it to unRAID's /tmp -Then I added a /tmp path and mapped it to unRAID's /tmp since I read that the encoder was using /tmp within plex so I gave it access to RAM. So far no issues. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.