trurl Posted May 14, 2018 Share Posted May 14, 2018 8 hours ago, dkerlee said: Not sure where the "docker run command" was, For future reference, it is explained at this link near the top of the Docker FAQ: I need help with an application? What information should I supply? Always a good idea to take a look at the "stickies".? 1 Quote Link to comment
aptalca Posted May 14, 2018 Share Posted May 14, 2018 12 hours ago, dkerlee said: (deleted from Unraid > General and moved here) I see that Sonarr (docker linux|server.io 2.0.0.5163) sends a download to Sabnzbd (docker linux|server.io 2.3.3 [1f04343]) successfully. But the download just sits there, and no mkv is extracted from the rar files. sabnzbd reports Repair [630d80d5bde8430a9bc59eb7932c8288] Quick Check OK Unpack [630d80d5bde8430a9bc59eb7932c8288] Unpacked 0 files/folders in 0 seconds [630d80d5bde8430a9bc59eb7932c8288] Unpacked 0 files/folders in 0 seconds While Sonarr just thinks the episode is downloading 100%, and sitting there. As soon as I manually unrar e "blah blah.rar.part001.rar" the mkv comes out, and Sonarr immediately files it away. I know Sabnzbd is sitting in a container, and doesn't have access to the normal /user/bin/unrar. I do have some odd settings in there to keep Sabnzbd from thrashing the server if it's working on a dozen or more episodes at once. Settings > Switches > Post processing > Nice Parameters -n10 IONice Parameters -c2 -n4 Extra PAR2 Parameters -t0 I don't recall where I got those things. I'll try pulling them out and seeing if that makes a difference. Anything jump out at anyone? Any other specific logs to include? attached. Not sure where the "docker run command" was, so I'll include a couple of screen shots of the config screen for both dockers. rubble-diagnostics-20180512-2139.zip sabnzbd 20180513.zip It might be those custom options. I use the default options and it has no problems unraring. In fact, the later versions do unrar while still downloading. Pretty cool 1 Quote Link to comment
witalit Posted May 14, 2018 Share Posted May 14, 2018 (edited) In the Sab log files can you tell me which episode it failed to unpack or process? Thanks Edit: I can see what you mean, it says unpacking then shows 0 unpacked. 2018-05-11 18:27:39,266::INFO::[newsunpack:835] Unpacked 0 files/folders in 0 seconds 2018-05-11 18:27:39,266::INFO::[newsunpack:268] Unrar finished on /incomplete-downloads/Once.Upon.a.Time.S07E21.720p.HDTV.x264-AVS-Obfuscated 2018-05-11 18:27:39,270::INFO::[postproc:388] Unpacked files [] 2018-05-11 18:27:39,271::INFO::[postproc:393] Finished unpack_magic on Once.Upon.a.Time.S07E21.720p.HDTV.x264-AVS-Obfuscated As someone suggested, back-up the options you have then turn them off. Try again and report back. Edited May 14, 2018 by witalit 1 Quote Link to comment
sincero Posted May 21, 2018 Share Posted May 21, 2018 On 3/25/2018 at 11:04 AM, Rick Gillyon said: Sabnzbd updated on Friday, and after restarting I was getting an error when trying to access it via the browser: Access denied - Hostname verification failed Was working fine before the update. Nothing I changed helped, I couldn't start the interface from browser with http://unraidpvr:8083/ like normal. I hadn't realised I was on the unstable branch, so I edited the container to take away "unstable" and after restarting, I could get in once again. All is working as it should except that the "version" section on the Docker tab looks like this: Any ideas? For either problem... Docker properties currently look like this: FYI this is a bit older but make sure to to the Config in Sab and go to "Special" and scroll down to the bottom. There's a section for a whitelist, make sure it reads "tower" or "Tower" depending on how you are trying to access it (or whatever hostname you use for your Sab box) The case sensitivity is key -- it matters. 1 1 Quote Link to comment
comfox Posted May 30, 2018 Share Posted May 30, 2018 Hey All, I have been using this docker for a while now and have this issue since starting but figured I would pose the question here. Whenever I am downloading something via this docker my Windows 10 VM will lag. The entire VM just freezes briefly for say 7 seconds then come back but then will continue to lag for 7 seconds until the download is complete. I use CPU pinning and have both the Docker and VM on different cores. No other dockers do this and I have some pretty intense ones running. Quote Link to comment
DoeBoye Posted May 31, 2018 Share Posted May 31, 2018 On 5/29/2018 at 10:09 PM, comfox said: I have been using this docker for a while now and have this issue since starting but figured I would pose the question here. Whenever I am downloading something via this docker my Windows 10 VM will lag. The entire VM just freezes briefly for say 7 seconds then come back but then will continue to lag for 7 seconds until the download is complete. I use CPU pinning and have both the Docker and VM on different cores. No other dockers do this and I have some pretty intense ones running. Is Sab writing to the same drive that the VM is living on? I used to share the cache drive as cache/VM storage, and would experience VM lag issues during download and other Sab file activity (unraring etc). Also, are you using a platter drive or an SSD for your VM? SSD definitely helps with VM performance. Quote Link to comment
CyberMew Posted July 1, 2018 Share Posted July 1, 2018 I'm trying to shift from PhaZe plugins to Dockers, and for sabnzbd, I'm used to using port 9090. However in this Docker, there are 2 ports being shown, 8080 and 9090. Why is there 2 of the ports and how can I make it only use 9090? 8080 is currently taken up by unifi already. Quote Link to comment
rutherford Posted July 1, 2018 Share Posted July 1, 2018 @CyberMew I'm pretty sure one of them is for the https and the other is for regular http access. You should be able to uncheck one of them, and free up the port. Quote Link to comment
CyberMew Posted July 1, 2018 Share Posted July 1, 2018 I set Port 1 to 7979, Port 2 to 9090 (the default), went into sabnzbd settings and edited the port from 8080 to 9090, but it didnt work, it's stuck with 8080. Even tried editing the config.ini directly, no go. Seems like there's just no way to switch the ports.. Quote Link to comment
saarg Posted July 1, 2018 Share Posted July 1, 2018 13 minutes ago, CyberMew said: I set Port 1 to 7979, Port 2 to 9090 (the default), went into sabnzbd settings and edited the port from 8080 to 9090, but it didnt work, it's stuck with 8080. Even tried editing the config.ini directly, no go. Seems like there's just no way to switch the ports.. You shouldn't touch the ports in the config of sabnzbd, only in the container template. Quote Link to comment
CyberMew Posted July 1, 2018 Share Posted July 1, 2018 41 minutes ago, saarg said: You shouldn't touch the ports in the config of sabnzbd, only in the container template. Yea was playing around. Any idea how to use port 9090 as the default or is this just the way it is for this docker? Quote Link to comment
aptalca Posted July 1, 2018 Share Posted July 1, 2018 28 minutes ago, CyberMew said: Yea was playing around. Any idea how to use port 9090 as the default or is this just the way it is for this docker? Just map 9090 to 8080 and 9091 or anything else to 9090 Quote Link to comment
CyberMew Posted July 6, 2018 Share Posted July 6, 2018 Thanks, think that's the way to go for now. I finally got time to configure this again, and having some confusion in making it work similar to Phaze plugin. With Phaze plugin we had direct access to the file system, so the Categories had their path in absolute format. However with docker, and that I also moved Sonarr from Phaze over to docker, Sonarr will not have access to Sabnzbd's final download folder. How would Sonarr monitor the tv category and the file path (/Downloads that's visible in Sabnzbd) and move the file (that Sonarr can't see I think?) in the correct folder that's been set inside Sonarr? Quote Link to comment
sparklyballs Posted July 6, 2018 Share Posted July 6, 2018 54 minutes ago, CyberMew said: Thanks, think that's the way to go for now. I finally got time to configure this again, and having some confusion in making it work similar to Phaze plugin. With Phaze plugin we had direct access to the file system, so the Categories had their path in absolute format. However with docker, and that I also moved Sonarr from Phaze over to docker, Sonarr will not have access to Sabnzbd's final download folder. How would Sonarr monitor the tv category and the file path (/Downloads that's visible in Sabnzbd) and move the file (that Sonarr can't see I think?) in the correct folder that's been set inside Sonarr? think of it this way mount point or docker volumes are a union between the internal path of a docker and a path on the host if you give the same name to the container side of the mount, and bind the same host path to two different containers, you can use the same container side path in the config ui of any app and as long as the permissions for each app to access the path(s) it works the same it would were it natively running on the host Quote Link to comment
CyberMew Posted July 7, 2018 Share Posted July 7, 2018 (edited) My current setup is such that Sabnzbd docker volumes is pointing to /mnt/cache/appdata/sabnzbd/complete-download for Downloads and /mnt/cache/appdata/sabnzbd/incomplete-download for Incomplete Downloads. So from my understanding so far, Sonarr needs to point it's container /downloads path to /mnt/cache/appdata/sabnzbd/complete-download instead of what I am currently setting it as (/mnt/cache/appdata/sonarr/downloads)? Assuming the above is correct, then how would I get Sonarr to move the downloaded files to it's final destination? I am also assuming it's through the /tv path in Sonarr? So this would mean I need to change ALL of my current config in Sonarr from /mnt/user/TVShows/* to /tv/TVShows/* right? Thank you very much for your help! Edited July 7, 2018 by CyberMew Quote Link to comment
Squid Posted July 7, 2018 Share Posted July 7, 2018 (edited) 1 hour ago, CyberMew said: My current setup is such that Sabnzbd docker volumes is pointing to /mnt/cache/appdata/sabnzbd/complete-download for Downloads and /mnt/cache/appdata/sabnzbd/incomplete-download for Incomplete Downloads. So from my understanding so far, Sonarr needs to point it's container /downloads path to /mnt/cache/appdata/sabnzbd/complete-download instead of what I am currently setting it as (/mnt/cache/appdata/sonarr/downloads)? Tentatively yes, but since you didn't itemize what the path mappings (container side) are for Sab, I can't say definitively 1 hour ago, CyberMew said: Assuming the above is correct, then how would I get Sonarr to move the downloaded files to it's final destination? I am also assuming it's through the /tv path in Sonarr? So this would mean I need to change ALL of my current config in Sonarr from /mnt/user/TVShows/* to /tv/TVShows/* right? Yes. But you can take a shortcut and instead map /mnt to /mnt on Sonarr which will save you from switching the basefolder for all of your TV shows. 23 hours ago, sparklyballs said: think of it this way mount point or docker volumes are a union between the internal path of a docker and a path on the host if you give the same name to the container side of the mount, and bind the same host path to two different containers, you can use the same container side path in the config ui of any app and as long as the permissions for each app to access the path(s) it works the same it would were it natively running on the host To explain what @sparklyballs said in English, you can keep every single one of your settings, etc in Sab (ugh), Sonarr, Radarr, or CouchPotato (also ugh) by simply mapping/adding another path of /mnt to /mnt on each and everyone of the apps. See also this: https://lime-technology.com/forums/topic/57181-real-docker-faq/?page=2#comment-566086 Edited July 7, 2018 by Squid Quote Link to comment
CyberMew Posted July 8, 2018 Share Posted July 8, 2018 Thanks! That is really helpful, the /mnt trick seems to be very useful (I created another host path in settings, hope it didn't break anything that also uses /mnt internally), though I guess giving the whole /mnt might be a little too much. The link that you gave is also very useful for understanding as well. I'm already used to sab so I'm going with that but I'm changing over to Radarr from CP soon since CP isn't that reliable for me sometimes. Quote Link to comment
ucliker Posted August 23, 2018 Share Posted August 23, 2018 So I am just curious, I've had Sabnzbd running for a long time now but I would like to know if my config is wrong. For the Temporary Downloads folder should it be /downloads - /mnt/cache/appdata/sabnzbd/downloads or /downloads - - /mnt/cache/downloads ? Quote Link to comment
trurl Posted August 23, 2018 Share Posted August 23, 2018 8 hours ago, ucliker said: So I am just curious, I've had Sabnzbd running for a long time now but I would like to know if my config is wrong. For the Temporary Downloads folder should it be /downloads - /mnt/cache/appdata/sabnzbd/downloads or /downloads - - /mnt/cache/downloads ? It really just depends on what you want to do. If you really understand volume mapping instead of just following someone else you should know how this works and how to customize it for your particular needs. Typically, if someone needs multiple dockers to access the downloads, they might put them in some "global" downloads folder, but even that's not really necessary. Just so long as the multiple dockers have mappings that go to the right unRAID folders it should work. 1 Quote Link to comment
Squid Posted August 23, 2018 Share Posted August 23, 2018 8 hours ago, ucliker said: For the Temporary Downloads folder should it be /downloads - /mnt/cache/appdata/sabnzbd/downloads or /downloads - - /mnt/cache/downloads For temporary downloads, its largely moot because only Sab needs access to the temp files. But, like @trurl says, you need a "global" downloads for all the containers for the completed downloads. See https://lime-technology.com/forums/topic/57181-real-docker-faq/?page=2#comment-566086 1 Quote Link to comment
ucliker Posted August 23, 2018 Share Posted August 23, 2018 Thanks for the replies guys. I have a global downloads folder for my dockers /mnt/cache/downloads and that's where everything that needs it points to. I was just curious about setting up another Sabnzbd docker to test something. I use HandBrake to convert movies and tv shows from Sonarr and Radarr and I am always left with two version of the files (original and converted). I wanted to see if I could automate a deletion folder or something. Squid I read that post last year and it's great, I just wish I had that information when I originally built my unRaid server lol. I guess it's better that I had to learn along the way. Quote Link to comment
airnorton Posted September 2, 2018 Share Posted September 2, 2018 (edited) Is it possible to get support for this container here even though my container isn't on my unraid machine? My current issue is that sab is consistently complaining about not liking my temporary/incomplete and completed download folders: download_dir directory: /unsorted/incomplete error accessing In the container's logs I see: 018-09-01 16:58:05,867::ERROR::[misc:526] download_dir directory: /unsorted/incomplete error accessing 2018-09-01 16:58:05,868::DEBUG::[misc:1625] Applying permissions 0755 (octal) to /unsorted/incomplete The container is binding /mnt/unsorted from the host to /unsorted in the container, and /mnt/unsorted is an SMB/CIFS share on a remote windows machine. If I'm shelled into the container as root, I am able to touch and manipulate files just fine. I've also tried chowning and chmodding the directories as 911:911 with 0777 permissions to no avail. For some reason, I wasn't having this issue on Ubuntu 18.04, but I've since moved to 16.04, as Docker is pretty unstable for me on 18.04. Any assistance would be greatly appreciated! Edited September 2, 2018 by airnorton Quote Link to comment
trurl Posted September 2, 2018 Share Posted September 2, 2018 9 minutes ago, airnorton said: Is it possible to get support for this container here even though my container isn't on my unraid machine? Did you read the first post in this thread? On 8/25/2015 at 10:06 AM, linuxserver.io said: If you are not using Unraid (and you should be!) then please do not post here, rather use the linuxserver.io forum for support. Quote Link to comment
airnorton Posted September 2, 2018 Share Posted September 2, 2018 (edited) 3 hours ago, trurl said: Did you read the first post in this thread? I did. That board is down as of now, I figured I would ask here. Sorry. Edited September 2, 2018 by airnorton Quote Link to comment
CHBMB Posted September 2, 2018 Share Posted September 2, 2018 I did. That board is down as of now, I figured I would ask here. Sorry.Go to our site and join our Discord.Sent from my Mi A1 using Tapatalk Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.