Squid Posted December 16, 2018 Share Posted December 16, 2018 1 hour ago, scubieman said: Mine is down alot. I clean up appdata. Won't make a difference. Appdata is not part of what the size display is showing, and anything that the Cleanup Appdata plugin offers to delete isn't an installed app anyways. Link to comment
scubieman Posted December 16, 2018 Share Posted December 16, 2018 (edited) It shows cleaning unifi logs Squid is the screenshot.... 1 hour ago, Squid said: Won't make a difference. Appdata is not part of what the size display is showing, and anything that the Cleanup Appdata plugin offers to delete isn't an installed app anyways. Sent from my Pixel 2 XL using Tapatalk Edited December 16, 2018 by scubieman Link to comment
fc0712 Posted January 6, 2019 Share Posted January 6, 2019 Why is the stable release not running 5.9.29 as it seems it has been the stable release since october. Link to comment
bonienl Posted January 6, 2019 Share Posted January 6, 2019 Change Repository to linuxserver/unifi:unstable if you want to run 5.9 series. Link to comment
Hoopster Posted January 7, 2019 Share Posted January 7, 2019 14 hours ago, fc0712 said: Why is the stable release not running 5.9.29 as it seems it has been the stable release since october. LSIO considers the "stable" release to be whatever Ubiquiti designates as the LTS (long-term support) stable release. That is currently 5.6.39. The Ubiquiti Stable release branch is accessed by using the "unstable" tag as bonienl mentioned. Ubiquiti uses the "stable" term very, very loosely. Their "stable" releases usually have many bugs in the earlier versions. I started using the "unstable" tag a couple of months ago (after there had been several 5.9.x releases and after monitoring the Ubiquiti forums for a few weeks) and have not found any big problems with the 5.9.29 release; although other users continue to have problems with it as noted in their forums. Link to comment
viperguy212 Posted January 12, 2019 Share Posted January 12, 2019 Hey all, Sorry for my ignorance but after trying to run Unifi from a docker I can't for the life of me figure out how to get out of this disconnected / adopted loop I'm currently experiencing with my USG and AP Lite. They appear in Unifi's device list without any issue but after letting them just sit after initially hitting "adopt" they just disconnect and then go to "adopting" again. I see some of you guys experienced something similar back in March with a new update at the time. I had them previously set up with a Windows version of Unifi and both units were adopted quickly without issue. Server/docker uptime has not been an issue. The only modifications I've made to the docker are the port # due to a conflict. Everything else is pretty standard (USG at 192.168.1.1, etc.). Am I just totally missing something? Thanks again! Link to comment
H2O_King89 Posted January 12, 2019 Share Posted January 12, 2019 Hey all, Sorry for my ignorance but after trying to run Unifi from a docker I can't for the life of me figure out how to get out of this disconnected / adopted loop I'm currently experiencing with my USG and AP Lite. They appear in Unifi's device list without any issue but after letting them just sit after initially hitting "adopt" they just disconnect and then go to "adopting" again. I see some of you guys experienced something similar back in March with a new update at the time. I had them previously set up with a Windows version of Unifi and both units were adopted quickly without issue. Server/docker uptime has not been an issue. The only modifications I've made to the docker are the port # due to a conflict. Everything else is pretty standard (USG at 192.168.1.1, etc.). Am I just totally missing something? Thanks again!Don’t change the ports. If it’s any issue change it to br0 and give the docker it’s own IP Sent from my iPhone using Tapatalk Pro Link to comment
Hoopster Posted January 12, 2019 Share Posted January 12, 2019 (edited) 40 minutes ago, viperguy212 said: Sorry for my ignorance but after trying to run Unifi from a docker I can't for the life of me figure out how to get out of this disconnected / adopted loop That often means that the devices can't find the inform server (the controller running in the docker). SSH into each device and run the following command: set-inform http://ip-of-controller:8080/inform In this case, ip-of-the controller will be the IP address of your unRAID server if you are running the docker in bridge mode or whatever IP address you assigned to the docker if you have it on a custom network. Note: You SSH to the devices with the username and password defined in the Site>Device Authentication section of the controller and not with the controller username and password. Edited January 12, 2019 by Hoopster Link to comment
goinsnoopin Posted January 12, 2019 Share Posted January 12, 2019 I have also had my access points work fine for days then go to adopting then disconnecting over and over. Doing what Hoopster wrote does fix things. Out of curiosity, I have my Unifi Docker set to auto update daily, I have noticed that this adoption/disconnect issue happens after an update. Do most users have auto-update turned off for the Unifi Docker? Thanks, Dan Link to comment
H2O_King89 Posted January 12, 2019 Share Posted January 12, 2019 I have also had my access points work fine for days then go to adopting then disconnecting over and over. Doing what Hoopster wrote does fix things. Out of curiosity, I have my Unifi Docker set to auto update daily, I have noticed that this adoption/disconnect issue happens after an update. Do most users have auto-update turned off for the Unifi Docker? Thanks, DanI have no issues. I run mine in host with auto update. I also host for 6 other locations. Sent from my iPhone using Tapatalk Pro Link to comment
goinsnoopin Posted January 12, 2019 Share Posted January 12, 2019 I just noticed that mine is running under bridge. Based on your comment...maybe I should change to host in my docker settings? Was also considering using custom:bro and assigning it an ip address. Link to comment
H2O_King89 Posted January 12, 2019 Share Posted January 12, 2019 I just noticed that mine is running under bridge. Based on your comment...maybe I should change to host in my docker settings? Was also considering using custom:bro and assigning it an ip address. I have other dockers that use the same ports as unifi and I just change the other dockers. I see other say they have the same issue and change unifi. If you have ports clashing and can’t change the other dockers then use br0 Sent from my iPhone using Tapatalk Pro Link to comment
Hoopster Posted January 12, 2019 Share Posted January 12, 2019 (edited) 3 hours ago, goinsnoopin said: I just noticed that mine is running under bridge. Based on your comment...maybe I should change to host in my docker settings? Was also considering using custom:bro and assigning it an ip address. When I initially set up the UniFi docker, I ran it in host mode. This was necessary to get the devices recognized, adopted and connected. After this was done the first time, I changed it back to bridge mode (I at one time also had it assigned a custom IP on br0, but this produced macvlan call traces on my server). It has been running in bridge mode ever since and has gone through many controller updates and the addition of new devices without the need to switch the docker back to host mode. Edited January 12, 2019 by Hoopster Link to comment
goinsnoopin Posted January 12, 2019 Share Posted January 12, 2019 Hoopster....interesting. Before reading your post I did the custom IP on bro and was having issues with home assistant, which has a unifi device tracker component that connects to the controller. I was getting errors in homeassistant that it could not configure the unifi component. So I then went to host mode and all is running. Now I am wondering if I should switch to bridge like you are suggesting. In bridge mode are you using all that standard ports? On my previous attempt at running in bridge mode I had some port mappings that were non standard due to conflicts with other dockers. This afternoon I changed the port mappings on my other dockers and am now using all unifi default ports. Dan Link to comment
Hoopster Posted January 12, 2019 Share Posted January 12, 2019 52 minutes ago, goinsnoopin said: In bridge mode are you using all that standard ports? Yes, all UniFi ports are the standard ports. These are the current settings on my UniFi docker: Link to comment
scubieman Posted January 25, 2019 Share Posted January 25, 2019 How can I restore this? I completely removed the docker. All I have is the logs. Is there anyway to restore my settings? Link to comment
sparklyballs Posted January 25, 2019 Share Posted January 25, 2019 1 hour ago, scubieman said: How can I restore this? I completely removed the docker. All I have is the logs. Is there anyway to restore my settings? Unless you have the config files from the mounted volume or a backup of them, there is no way of restoring settings. Link to comment
scubieman Posted January 25, 2019 Share Posted January 25, 2019 2 minutes ago, sparklyballs said: Unless you have the config files from the mounted volume or a backup of them, there is no way of restoring settings. Not sure where the config files would be located. If i look at the folder it shows the log files only in the appdata. Link to comment
H2O_King89 Posted January 25, 2019 Share Posted January 25, 2019 Not sure where the config files would be located. If i look at the folder it shows the log files only in the appdata.Then it’s gone Sent from my iPhone using Tapatalk Pro Link to comment
lrx345 Posted February 1, 2019 Share Posted February 1, 2019 (edited) On 1/12/2019 at 3:46 PM, goinsnoopin said: Hoopster....interesting. Before reading your post I did the custom IP on bro and was having issues with home assistant, which has a unifi device tracker component that connects to the controller. I was getting errors in homeassistant that it could not configure the unifi component. So I then went to host mode and all is running. Now I am wondering if I should switch to bridge like you are suggesting. In bridge mode are you using all that standard ports? On my previous attempt at running in bridge mode I had some port mappings that were non standard due to conflicts with other dockers. This afternoon I changed the port mappings on my other dockers and am now using all unifi default ports. Dan Hey Dan, Were you able to figure this out? I recently added a Unifi switch to my setup and am having similar issues. Whenever the docker restarts I have to go in and set-inform http://controllerIP:8080/inform And it's super annoying! I've been running this docker with zero issues for over a year, so idk why its just now doing this. I also installed the unifi video docker, but they don't share ports... Edit: After lots of digging, I've discovered all of my unifi devices are being passed "http://172.17.0.9:8080/inform" when the docker container restarts. Just so happens that is the internal IP of the docker container! Now the question for someone smarter than I am: How do I ensure the devices get the correct IP address of "192.168.1.8" OR make sure http://unifi:8080/inform works? Edited February 1, 2019 by lrx345 Link to comment
Hoopster Posted February 1, 2019 Share Posted February 1, 2019 1 hour ago, lrx345 said: Now the question for someone smarter than I am: How do I ensure the devices get the correct IP address of "192.168.1.8" OR make sure http://unifi:8080/inform works? Perhaps you need to enable the "Override inform host with controller hostname/IP" option in the Controller Settings. My devices pick up the Controller IP OK without it but, if your devices are getting the docker IP, maybe enabling this option will fix it for you. Link to comment
lrx345 Posted February 1, 2019 Share Posted February 1, 2019 (edited) 27 minutes ago, Hoopster said: Perhaps you need to enable the "Override inform host with controller hostname/IP" option in the Controller Settings. My devices pick up the Controller IP OK without it but, if your devices are getting the docker IP, maybe enabling this option will fix it for you. I notice you also have Make Controller discoverable on L2 network enabled. Do i need that enabled for home use? Edit: I want to confirm that checking "override inform host with controller hostname/IP" worked for me. Thank you for that. Now if anyone can explain WHY that works, I would love to know :). Really just wondering why my controller is broadcasting the docker local IP instead of the NIC IP. My cloud access is broken as a result. It's trying the docker IP, and well... that isn't gonna work Edited February 1, 2019 by lrx345 Link to comment
CorneliousJD Posted February 1, 2019 Share Posted February 1, 2019 2 minutes ago, lrx345 said: I notice you also have Make Controller discoverable on L2 network enabled. Do i need that enabled for home use? I had made a post about this in the last few pages. I'm mobile but I also screebshot it too, follow that And you should be good! Link to comment
lrx345 Posted February 1, 2019 Share Posted February 1, 2019 1 minute ago, CorneliousJD said: I had made a post about this in the last few pages. I'm mobile but I also screebshot it too, follow that And you should be good! This one? Link to comment
Hoopster Posted February 1, 2019 Share Posted February 1, 2019 I notice you also have Make Controller discoverable on L2 network enabled. Do i need that enabled for home use?Yes, you should enable that. I guess I thought you already had it enabled so I referenced the other option.Sent from my iPhone using Tapatalk Link to comment
Recommended Posts