Nnyan Posted September 28, 2020 Share Posted September 28, 2020 Ok thank you for that information you cleared up a few things for me. Got my setup inline with what you described and I got it working! Thank you SO much for your help. Quote Link to comment
orlando500 Posted September 29, 2020 Share Posted September 29, 2020 (edited) Edit: Updated to new docker with 1.20.2.3370 public version and it seems to work for me again. Is there a bug in the version in current image? Server Version#: 1.20.2.3343 Player Version#: 8.6.0.20351 (shield pro version 8.2.0 (32.6.435.1) When going into the plex client on the shield today i noticed that my last added movies was gone. I have done no changes to the config and have been the same for months. I tried to add the last added movies to the home screen again. didnt happen. did it again with some others sections i could add. Then tok a reset of the shield. Same error. Then i did a reset in plex client and did go auto mode for homescreen. All sections ok. Did go back to manual setup. Tried to remove plex shows etc that i dont use. It then removes all my “my added tv shows” and “just added movies” sections from the client. See video https://youtu.be/MwFppBkckDY Anyone else have this? Edited September 29, 2020 by orlando500 maybe solved Quote Link to comment
gingerbredmen Posted September 29, 2020 Share Posted September 29, 2020 (edited) First, thanks binhex and all the great work that went into this docker! Just came on here to investigate my first issue with plex. Disclaimer, I'm very new to unraid, like 2 months ago new. Anyways, I noticed my shield would lose connection to the server, I confirmed the server was up on my laptop through a web player. It wasn't until I went into unraid and updated the docker (there happened to be an update) that it fixed this. I had tried restarting the shield, checking it had internet to no avail. Anyways this happened again yesterday. So twice this week, where it lost connection, I see that there happens to be an update, I apply it, and then it's fixed. Is this normal behavior? I mean even if the shield plex app was updated there should be compatibility there right? Seems odd to me and wanted to confirm that this isn't normal behavior, so I wouldn't have to expect that everytime there's an update to the docker that my shields will lose connection to it. Thanks all. Edited September 29, 2020 by gingerbredmen Quote Link to comment
hunter69 Posted September 30, 2020 Share Posted September 30, 2020 Hello, I am switching my Plex server to this Unraid Docker. I have access to a Nvidia GTX 970. I am interested in installing this video card for hardware assist. This is my setup: I have a Unraid virtualized on esxi 6.5. What I plan to do: Install the Nvidia gtx 970. Pass through the video card to the Unraid VM. Questions: Will this work? If so, what else will I need to do to enable hardware assist using the GTX970? Thanks in advance for any help Bill Quote Link to comment
El Player Posted October 2, 2020 Share Posted October 2, 2020 (edited) My binhex-plexpass version says "not available" Anyone else seen this? Edited October 2, 2020 by El Player Quote Link to comment
paperblankets Posted October 2, 2020 Share Posted October 2, 2020 (edited) 33 minutes ago, El Player said: My binhex-plexpass version says "not available" Anyone else seen this? That typically means you are offline I think (Or can't get a connection to the cloud services/docker images that are trying to be checked)? If you are online you should be able to click check for updates I think. Edited October 2, 2020 by paperblankets Quote Link to comment
tazire Posted October 3, 2020 Share Posted October 3, 2020 I just updated to the latest release of this and I am finding that the hw transcoding isnt working like it used to. It seems to have gone back to encode only? I am seeing very high CPU usage as a result. Maybe its just me or randomly the media being watched atm cant hw decode. just curious if anyone else is seeing this? Quote Link to comment
therapist Posted October 3, 2020 Share Posted October 3, 2020 1 hour ago, tazire said: I just updated to the latest release of this and I am finding that the hw transcoding isnt working like it used to. It seems to have gone back to encode only? I am seeing very high CPU usage as a result. Maybe its just me or randomly the media being watched atm cant hw decode. just curious if anyone else is seeing this? its not just you the easiest solution is to install a "custom" kernel with updated drivers -- super easy 1 Quote Link to comment
ich777 Posted October 3, 2020 Share Posted October 3, 2020 1 hour ago, tazire said: I just updated to the latest release of this and I am finding that the hw transcoding isnt working like it used to. It seems to have gone back to encode only? I am seeing very high CPU usage as a result. Maybe its just me or randomly the media being watched atm cant hw decode. just curious if anyone else is seeing this? 2 minutes ago, therapist said: the easiest solution is to install a "custom" kernel with updated drivers -- super easy You can also download a prebuilt one. Quote Link to comment
tazire Posted October 3, 2020 Share Posted October 3, 2020 1 minute ago, therapist said: its not just you the easiest solution is to install a "custom" kernel with updated drivers -- super easy ah ok.... cheers for the response. I dont really want to update to the beta version of unraid just yet. CPU is ok to deal with it for now until the linuxserver plugin gets updated. Thanks again Quote Link to comment
ich777 Posted October 3, 2020 Share Posted October 3, 2020 Just now, tazire said: ah ok.... cheers for the response. I dont really want to update to the beta version of unraid just yet. CPU is ok to deal with it for now until the linuxserver plugin gets updated. Thanks again It also works for the stable version. By default it's designed to work with the stable. Quote Link to comment
tazire Posted October 3, 2020 Share Posted October 3, 2020 1 minute ago, ich777 said: It also works for the stable version. By default it's designed to work with the stable. Using your plugin will it just update the driver? Or would i have to remove the linuxserver plugin then install yours??? Quote Link to comment
ich777 Posted October 3, 2020 Share Posted October 3, 2020 6 minutes ago, tazire said: Using your plugin will it just update the driver? Or would i have to remove the linuxserver plugin then install yours??? This is not a plugin. What the linuxserver plugin does is that it downloads a prebuilt Custom Unraid image from their servers and you have to reboot your server. My 'thing' is a Docker Container for Unraid itself that allows you to build your own Custom Unraid image (really really easy), just start it and open the log for the container (the build process will take about 15minutes on a i7 2600 with an SSD). So you can build with the latest nVidia drivers. EDIT: But you have to replace the files on your bootdrive manually. I also have a Plugin in the CA App that reads basically everything from your Server that you can build with my Docker Container and display it (like the linuxserver.io plugin but with the advantage that you can integrate nVidia, DVB, ZFS and many more but you don't have to). Quote Link to comment
tazire Posted October 3, 2020 Share Posted October 3, 2020 2 minutes ago, ich777 said: This is not a plugin. What the linuxserver plugin does is that it downloads a prebuilt Custom Unraid image from their servers and you have to reboot your server. My 'thing' is a Docker Container for Unraid itself that allows you to build your own Custom Unraid image (really really easy), just start it and open the log for the container (the build process will take about 15minutes on a i7 2600 with an SSD). So you can build with the latest nVidia drivers. I also have a Plugin in the CA App that reads basically everything from your Server that you can build with my Docker Container and display it (like the linuxserver.io plugin but with the advantage that you can integrate nVidia, DVB, ZFS and many more but you don't have to). I had a quick look at it there. very nice... ill have a proper go of it a bit later when i have an hour to give it. cheers for the info. 1 Quote Link to comment
ich777 Posted October 3, 2020 Share Posted October 3, 2020 2 minutes ago, tazire said: I had a quick look at it there. very nice... ill have a proper go of it a bit later when i have an hour to give it. cheers for the info. Please report back how it went, should be really simple. One sidenote, download it now from the CA App and choose your build options (you don't have to fill everything just the things you need), start it and let it do it's thing when you come back it is finished and you can replace the files on your boot drive and restart the server. EDIT: Don't forget to backup the existing files on your local computer. 1 Quote Link to comment
dfox1787 Posted October 3, 2020 Share Posted October 3, 2020 Hi Guys My plex camera upload stopped working back in march and ive only just noticed. if i manually upload the photos are stuck on uploading and the log shows the below: any advice? Quote Link to comment
dfox1787 Posted October 7, 2020 Share Posted October 7, 2020 On 10/3/2020 at 5:39 PM, dfox1787 said: Hi Guys My plex camera upload stopped working back in march and ive only just noticed. if i manually upload the photos are stuck on uploading and the log shows the below: any advice? anyone? also where is the chromecast.xml file? Quote Link to comment
acosmichippo Posted November 3, 2020 Share Posted November 3, 2020 (edited) Hey guys, I'm trying to collect plex logs, but when I navigate to the logs folder in krusader it says it cannot open the folder. I also tried deleting the Logs folder to see if Plex would recreate it but it would not delete. Searched this thread, but didn't find any issues like this yet. Any idea why this is or how to fix it? Thanks! Edited November 3, 2020 by acosmichippo Quote Link to comment
thostr Posted November 4, 2020 Share Posted November 4, 2020 Hi binhex, I have an issue with transcoding EAC codecs, and I get the following error in the logs: It have been working in the past, but not sure when the the error started. Any suggestions how to fix this? I use PMS 1.20.4.3517 and unRAID 6.8.3 Quote Link to comment
thostr Posted November 4, 2020 Share Posted November 4, 2020 47 minutes ago, thostr said: Hi binhex, I have an issue with transcoding EAC codecs, and I get the following error in the logs: It have been working in the past, but not sure when the the error started. Any suggestions how to fix this? I use PMS 1.20.4.3517 and unRAID 6.8.3 Just a follow up. I deleted the content of the Codec folder witch seemed to have fixed the issue. Quote Link to comment
SpyKiIIer Posted November 10, 2020 Share Posted November 10, 2020 (edited) Hi! My unRaid server had a restart (normal restart, not crash), and now when I start the Plex docker, it continuously starts and stops, without ever being able to load the UI. Any idea what could have gone wrong (and how to fix it)? Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2020-11-09 23:18:42.627374 [info] System information Linux Tower 4.19.107-Unraid #1 SMP Thu Mar 5 13:55:57 PST 2020 x86_64 GNU/Linux 2020-11-09 23:18:42.725249 [info] OS_ARCH defined as 'x86-64' 2020-11-09 23:18:42.751118 [info] PUID defined as '99' 2020-11-09 23:18:49.053481 [info] PGID defined as '100' 2020-11-09 23:19:02.121025 [info] UMASK defined as '000' 2020-11-09 23:19:02.145629 [info] Permissions already set for volume mappings 2020-11-09 23:19:02.175241 [info] Deleting files in /tmp (non recursive)... 2020-11-09 23:19:02.201132 [info] TRANS_DIR defined as '/config/transcode' 2020-11-09 23:19:02.281128 [info] Starting Supervisor... 2020-11-09 23:19:02,462 INFO Included extra file "/etc/supervisor/conf.d/plexmediaserver.conf" during parsing 2020-11-09 23:19:02,462 INFO Set uid to user 0 succeeded 2020-11-09 23:19:02,465 INFO supervisord started with pid 6 2020-11-09 23:19:03,467 INFO spawned: 'plexmediaserver' with pid 68 2020-11-09 23:19:03,467 INFO reaped unknown pid 7 (exit status 0) 2020-11-09 23:19:04,469 INFO success: plexmediaserver entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2020-11-09 23:22:23,385 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23093903014544 for <Subprocess at 23093903013824 with name plexmediaserver in state RUNNING> (stderr)> 2020-11-09 23:22:23,385 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23093903012912 for <Subprocess at 23093903013824 with name plexmediaserver in state RUNNING> (stdout)> 2020-11-09 23:22:23,385 INFO exited: plexmediaserver (exit status 255; not expected) 2020-11-09 23:22:23,386 DEBG received SIGCHLD indicating a child quit 2020-11-09 23:22:23,387 INFO spawned: 'plexmediaserver' with pid 76 2020-11-09 23:22:24,387 INFO success: plexmediaserver entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2020-11-09 23:22:24,622 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23093903417200 for <Subprocess at 23093903013824 with name plexmediaserver in state RUNNING> (stdout)> 2020-11-09 23:22:24,622 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23093902780160 for <Subprocess at 23093903013824 with name plexmediaserver in state RUNNING> (stderr)> 2020-11-09 23:22:24,622 INFO exited: plexmediaserver (exit status 255; not expected) 2020-11-09 23:22:24,622 DEBG received SIGCHLD indicating a child quit 2020-11-09 23:22:25,624 INFO spawned: 'plexmediaserver' with pid 81 2020-11-09 23:22:26,625 INFO success: plexmediaserver entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2020-11-09 23:22:27,472 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23093902737856 for <Subprocess at 23093903013824 with name plexmediaserver in state RUNNING> (stdout)> 2020-11-09 23:22:27,472 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23093903014544 for <Subprocess at 23093903013824 with name plexmediaserver in state RUNNING> (stderr)> 2020-11-09 23:22:27,473 INFO exited: plexmediaserver (exit status 255; not expected) 2020-11-09 23:22:27,473 DEBG received SIGCHLD indicating a child quit 2020-11-09 23:22:28,474 INFO spawned: 'plexmediaserver' with pid 86 2020-11-09 23:22:29,475 INFO success: plexmediaserver entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2020-11-09 23:22:30,000 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23093903417200 for <Subprocess at 23093903013824 with name plexmediaserver in state RUNNING> (stdout)> 2020-11-09 23:22:30,000 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23093902780064 for <Subprocess at 23093903013824 with name plexmediaserver in state RUNNING> (stderr)> 2020-11-09 23:22:30,001 INFO exited: plexmediaserver (exit status 255; not expected) 2020-11-09 23:22:30,001 DEBG received SIGCHLD indicating a child quit 2020-11-09 23:22:31,002 INFO spawned: 'plexmediaserver' with pid 91 2020-11-09 23:22:31,002 INFO spawned: 'plexmediaserver' with pid 91 2020-11-09 23:22:32,003 INFO success: plexmediaserver entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2020-11-09 23:22:32,146 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23093903012912 for <Subprocess at 23093903013824 with name plexmediaserver in state RUNNING> (stderr)> 2020-11-09 23:22:32,146 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23093903130240 for <Subprocess at 23093903013824 with name plexmediaserver in state RUNNING> (stdout)> 2020-11-09 23:22:32,146 INFO exited: plexmediaserver (exit status 255; not expected) 2020-11-09 23:22:32,146 DEBG received SIGCHLD indicating a child quit and that just repeats until I stop the docker. Help! (please!) Edited November 10, 2020 by SpyKiIIer spelling Quote Link to comment
binhex Posted November 10, 2020 Author Share Posted November 10, 2020 4 hours ago, SpyKiIIer said: and that just repeats until I stop the docker. Help! (please!) attach your plex log, its located at '/config/Plex Media Server/Logs/Plex Media Server.log' Quote Link to comment
SpyKiIIer Posted November 10, 2020 Share Posted November 10, 2020 5 hours ago, binhex said: attach your plex log, its located at '/config/Plex Media Server/Logs/Plex Media Server.log' Looks like the database got pooched Plex Media Server.log Quote Link to comment
binhex Posted November 10, 2020 Author Share Posted November 10, 2020 1 hour ago, SpyKiIIer said: Looks like the database got pooched agreed, your only course of action here is restore from CA backup (you do this right? :-)) or wipe plex database and re-index all media. Quote Link to comment
SpyKiIIer Posted November 11, 2020 Share Posted November 11, 2020 14 hours ago, binhex said: agreed, your only course of action here is restore from CA backup (you do this right? :-)) or wipe plex database and re-index all media. Of course I do.... I was able to restore from a Plex DB backup from a week ago. So we are good again. Still not sure what caused the corruption though. Thanks for the help! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.