fredamn76 Posted September 11, 2018 Share Posted September 11, 2018 On 6/28/2018 at 3:44 AM, Darnshelm said: HI I get this error in TVH proxy Error grabbing logs: EOF When I try to use plextvheadend i get 2018/06/28 03:29:18 Got 0 channels from tvheadend2018/06/28 03:29:22 192.168.1.22:57704 POST /lineup.post?scan=start&source=Cable2018/06/28 03:29:22 192.168.1.22:57706 GET /discover.json2018/06/28 03:29:22 192.168.1.22:57708 GET /lineup_status.json2018/06/28 03:29:22 192.168.1.22:57710 GET /lineup.json2018/06/28 03:29:22 Got 0 channels from tvheadend Can I change the source ? I think you need to give all your channels a number in Tvheadend. it worked for me. Quote Link to comment
DazedAndConfused Posted October 9, 2018 Share Posted October 9, 2018 (edited) Finally got TVHProxy working. Basically, after you put the ip address:5004 into the Live TV setup and hit the button to find the server, it will never show up but you will know if it found the proxy server if it unchecks the tuners that it can see, that means it found something else and checked that instead (or when the continue button becomes clickable if theres no discoverable tuners for plex). It will be invisible..but just hit continue and you will be able to set it up. I beat my head on the desk for hours before I discovered that. How do recordings work though? I dont see any recordings from TVH and setting something to record in Plex makes Plex record the program and then add it to my library. I want everything to go through TVH. Edited October 9, 2018 by DazedAndConfused Quote Link to comment
Rick Gillyon Posted October 9, 2018 Share Posted October 9, 2018 3 hours ago, DazedAndConfused said: How do recordings work though? I dont see any recordings from TVH and setting something to record in Plex makes Plex record the program and then add it to my library. I want everything to go through TVH. TVHProxy is only a tuner proxy. So when you tell Plex to record something, it records it via TVH and puts it in a library. If you record things directly in TVH and want that to appear in Plex, share the recordings folder to Plex and add it as a Library in Plex. Quote Link to comment
skank Posted October 30, 2018 Share Posted October 30, 2018 (edited) total new here installed the app "apache" when i click web ui it says i lack permission i need the apache server for php scripts im on unraid 6.5.3 using cache disk ( for other applications too like sabnzb, dropbox,...) Edited October 30, 2018 by skank Quote Link to comment
skank Posted November 2, 2018 Share Posted November 2, 2018 Anyone willing to help me setup a php server? no comments here Quote Link to comment
karldonteljames Posted November 5, 2018 Share Posted November 5, 2018 Morning. Is it possible to host WordPress with apache-php and influxdb? If so how could one go about doing so? I already have lets-encrypt installed, and influx being fed information from my home assistant. I currently host a simple on a server 2012 VM in unraid, but it consumes far too many resources, so ideally I'd like to use dockers. I think i know how to migrate from one to another, but I need help with configuring apache first. - Many Thanks. Quote Link to comment
danioj Posted January 5, 2019 Share Posted January 5, 2019 For anyone having an issue setting up this container, here are some tips from me: - don't worry that there appear to be no port or config mappings. Everything is fine, you don't need to add these. - if you set your own IP (which you will probs have to do given it requires port 80) then ALL other containers it interacts with need their own IP - tvhProxy may need a restart before it will be recognised by TVH. - Don't mess with ports - use <ip>:<port> format of tvhProxy setup in Plex to find the server. Just my experience - HNY 2019. D Quote Link to comment
amardilo Posted January 7, 2019 Share Posted January 7, 2019 (edited) I'm struggling to get Plex, Tvheadend and TVHProxy setup. I have an Elgato EyeTV Netstream Sat plugged into my satellite feed and then plugged into my network (via Ethernet) and I can watch TV (Freesat) using the EyeTV app on my Mac and iOS devices. I then created a m3u file from the Elgato EyeTV Netstream Sat website/server and fed that into my Tvheadend container (running on it's own IP). I created a new user (access it has is pretty much the same as the admin/default user) with a password and I got a long list of channels and I can watch live TV when I click on the Play button on the channel list when I login as that user (watching through VLC). However when I try to setup the TVHProxy container (running on it's own IP) I get a Internal Server Error message when I try to visit it's IP (both on port 80 and 5004) by going to the lineup.json page. I also tried the plextvheadend container (running on the same IP as TVHProxy - although I don't run plextvheadend and TVHProxy at the same time) and when I goto lineup.json I just get an empty json file. The logs on Unraid (version 6.6.6) for both proxy containers don't show any errors that I can see. When I try Plex and use the <IP>:<Port> or just <IP> for either proxy container It can't find anything. Anyone have any idea what I am doing wrong? I've seen online that you might need to supply TVHeadend with a set of channel numbers but I am not sure how to do this. Edited January 7, 2019 by amardilo Quote Link to comment
NewDisplayName Posted March 20, 2019 Share Posted March 20, 2019 (edited) I would like to access the apache-php docker (/config, /web) via smb, but it says i dont have permissions... how to fix? 1.) nvm. data folder seems to work, just not config files. 2.) Also, there seem to be support for mod rewrite missing, ive mo2end rewrite it and it keept it, even after restart, was that the correct way? 3.) could you maybe include the httpd.conf inside the conf folder? Will this container get further updates? Edited March 20, 2019 by nuhll Quote Link to comment
comet424 Posted April 16, 2019 Share Posted April 16, 2019 hi I have some questions about the apache webserver I currently use windows 2016 server to run 5 websites I have on my vm I wanted to know if apache can run all 5 websites at once if it can run windows server side includes as that's my website and if it has the option for reverse dns I think so 5 websites and if you do www.site1.com goes to 1 directory www.site2.com goest to 2 directory and so on.. and I tried installing apache I but when I try to run the gui mode its page not be found at port 8005 so maybe you guys could tell me if this would work or if its just for 1 website etc thanks Quote Link to comment
Stealth1081 Posted June 13, 2019 Share Posted June 13, 2019 Hi I have setup the TVHProxy container and Plex sees it as Silicondusk tvhProxy tuner. I just get an error "There was a problem getting the channels for you device" Is there a configuration setting on TVHeadend that i am supposed to set for it to work. I have tried different TVHeadend users but make no difference. Error log from TVHProxy ::ffff:192.168.1.125 - - [2019-06-13 14:44:33] "GET /discover.json HTTP/1.0" 200 450 0.000769 ::ffff:192.168.1.125 - - [2019-06-13 14:44:33] "GET /lineup_status.json HTTP/1.0" 200 234 0.000518 ::ffff:192.168.1.125 - - [2019-06-13 14:44:33] "GET /discover.json HTTP/1.0" 200 450 0.000523 ::ffff:192.168.1.125 - - [2019-06-13 14:44:33] "GET /lineup_status.json HTTP/1.0" 200 234 0.000527 An error occured: ValueError('No JSON object could be decoded',) [2019-06-13 14:44:34,158] ERROR in app: Exception on /lineup.json [GET] Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/flask/app.py", line 1982, in wsgi_app response = self.full_dispatch_request() File "/usr/lib/python2.7/site-packages/flask/app.py", line 1614, in full_dispatch_request rv = self.handle_user_exception(e) File "/usr/lib/python2.7/site-packages/flask/app.py", line 1517, in handle_user_exception reraise(exc_type, exc_value, tb) File "/usr/lib/python2.7/site-packages/flask/app.py", line 1612, in full_dispatch_request rv = self.dispatch_request() File "/usr/lib/python2.7/site-packages/flask/app.py", line 1598, in dispatch_request return self.view_functions[rule.endpoint](**req.view_args) File "/opt/tvhproxy/tvhProxy.py", line 54, in lineup for c in _get_channels(): TypeError: 'NoneType' object is not iterable ::ffff:192.168.1.125 - - [2019-06-13 14:44:34] "GET /lineup.json HTTP/1.0" 500 431 0.006466 Quote Link to comment
remati Posted August 5, 2019 Share Posted August 5, 2019 In regards to the Apache-PHP container, it would be nice to have the apache2.conf/httpd.conf file in the config folder so we can make changes to it! And +1 for enabling mod_rewrite as well. 1 Quote Link to comment
NLS Posted October 7, 2019 Share Posted October 7, 2019 As mentioned in this thread: ...I am looking among other things, about something to replace my Exchange server. I see KerioConnect is a possible alternative supporting mail/contacts/calendar. Correct? I also see in the vendor's site, that KerioConnect is nowadays commercial. So... will this plugin work? I see it is based on a build a few years ago and never updated. Also, does this server support pop-connector functionality? (i.e. download email from other server) Is this plugin maintained at all? Any alternative for mail/contacts/calendar? Quote Link to comment
reiczel.01 Posted January 29, 2020 Share Posted January 29, 2020 Hi, I have problem. I can't set up wordpress on Apache-php, can somebody help? Quote Link to comment
comet424 Posted April 5, 2020 Share Posted April 5, 2020 hi I have questions about apache.. instead of running a windows VM running windows Server side includes... does apache run it I know I haven't updated my website in years.. so I not down with all the fancy stuff.. so was just curious and if apachine can run multiple websites as I host 5 different ones on my windows vm on my home location.. so I jus curious what it can do Quote Link to comment
Adznon Posted May 3, 2020 Share Posted May 3, 2020 Hello Guys, Thanks for all the time and effort that you put into these to make our lifes easier Is there any change the PHP version could be upgraded in the Apache Docker. Am using it to host multiple wordpress sites and workpress now requires php 5.6 or higher. Apt-get only upgraded it to php 5.5 Thanks Quote Link to comment
open_borre Posted August 30, 2020 Share Posted August 30, 2020 On 5/3/2020 at 12:09 PM, Adznon said: Hello Guys, Thanks for all the time and effort that you put into these to make our lifes easier Is there any change the PHP version could be upgraded in the Apache Docker. Am using it to host multiple wordpress sites and workpress now requires php 5.6 or higher. Apt-get only upgraded it to php 5.5 Thanks Same question here. I need php 7.2 how can this be done? Quote Link to comment
Boo-urns Posted September 6, 2020 Share Posted September 6, 2020 On 6/13/2019 at 11:49 PM, Stealth1081 said: Hi I have setup the TVHProxy container and Plex sees it as Silicondusk tvhProxy tuner. I just get an error "There was a problem getting the channels for you device" Is there a configuration setting on TVHeadend that i am supposed to set for it to work. I have tried different TVHeadend users but make no difference. Error log from TVHProxy ::ffff:192.168.1.125 - - [2019-06-13 14:44:33] "GET /discover.json HTTP/1.0" 200 450 0.000769 ::ffff:192.168.1.125 - - [2019-06-13 14:44:33] "GET /lineup_status.json HTTP/1.0" 200 234 0.000518 ::ffff:192.168.1.125 - - [2019-06-13 14:44:33] "GET /discover.json HTTP/1.0" 200 450 0.000523 ::ffff:192.168.1.125 - - [2019-06-13 14:44:33] "GET /lineup_status.json HTTP/1.0" 200 234 0.000527 An error occured: ValueError('No JSON object could be decoded',) [2019-06-13 14:44:34,158] ERROR in app: Exception on /lineup.json [GET] Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/flask/app.py", line 1982, in wsgi_app response = self.full_dispatch_request() File "/usr/lib/python2.7/site-packages/flask/app.py", line 1614, in full_dispatch_request rv = self.handle_user_exception(e) File "/usr/lib/python2.7/site-packages/flask/app.py", line 1517, in handle_user_exception reraise(exc_type, exc_value, tb) File "/usr/lib/python2.7/site-packages/flask/app.py", line 1612, in full_dispatch_request rv = self.dispatch_request() File "/usr/lib/python2.7/site-packages/flask/app.py", line 1598, in dispatch_request return self.view_functions[rule.endpoint](**req.view_args) File "/opt/tvhproxy/tvhProxy.py", line 54, in lineup for c in _get_channels(): TypeError: 'NoneType' object is not iterable ::ffff:192.168.1.125 - - [2019-06-13 14:44:34] "GET /lineup.json HTTP/1.0" 500 431 0.006466 +1 on this error. Plex sees the TVHproxy tuner, but "There was a problem getting the channels for your device" when you try to scan. Exact same error log in tvhproxy too. @Stealth1081 Did you end up finding a fix for this? Quote Link to comment
Tungmeister Posted November 14, 2020 Share Posted November 14, 2020 On 9/6/2020 at 6:56 AM, Boo-urns said: +1 on this error. Plex sees the TVHproxy tuner, but "There was a problem getting the channels for your device" when you try to scan. Exact same error log in tvhproxy too. @Stealth1081 Did you end up finding a fix for this? Just worked out the fix for this - you nee to enable basic authentication under the base config tab: the proxy will then be able to connect and it should all work straight away. Quote Link to comment
curtp Posted December 20, 2020 Share Posted December 20, 2020 I am needing to use tvhproxy so plex can use the tuner but when i type in the ip of tvhproxy in plex it doesn't show anything up. Been trying for a while as tp what it is and I can't think of anything. any help much appreciated thanks Quote Link to comment
Obscuritas Posted December 26, 2020 Share Posted December 26, 2020 (edited) Hey, I just installed the Apache-PHP container through the app panel. But when I want to connect to the webserver I get to see this: Edited December 27, 2020 by Obscuritas Quote Link to comment
Schicksal Posted February 28, 2021 Share Posted February 28, 2021 (edited) On 6/13/2019 at 3:49 PM, Stealth1081 said: Hi I have setup the TVHProxy container and Plex sees it as Silicondusk tvhProxy tuner. I just get an error "There was a problem getting the channels for you device" Is there a configuration setting on TVHeadend that i am supposed to set for it to work. I have tried different TVHeadend users but make no difference. Error log from TVHProxy ::ffff:192.168.1.125 - - [2019-06-13 14:44:33] "GET /discover.json HTTP/1.0" 200 450 0.000769 ::ffff:192.168.1.125 - - [2019-06-13 14:44:33] "GET /lineup_status.json HTTP/1.0" 200 234 0.000518 ::ffff:192.168.1.125 - - [2019-06-13 14:44:33] "GET /discover.json HTTP/1.0" 200 450 0.000523 ::ffff:192.168.1.125 - - [2019-06-13 14:44:33] "GET /lineup_status.json HTTP/1.0" 200 234 0.000527 An error occured: ValueError('No JSON object could be decoded',) [2019-06-13 14:44:34,158] ERROR in app: Exception on /lineup.json [GET] Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/flask/app.py", line 1982, in wsgi_app response = self.full_dispatch_request() File "/usr/lib/python2.7/site-packages/flask/app.py", line 1614, in full_dispatch_request rv = self.handle_user_exception(e) File "/usr/lib/python2.7/site-packages/flask/app.py", line 1517, in handle_user_exception reraise(exc_type, exc_value, tb) File "/usr/lib/python2.7/site-packages/flask/app.py", line 1612, in full_dispatch_request rv = self.dispatch_request() File "/usr/lib/python2.7/site-packages/flask/app.py", line 1598, in dispatch_request return self.view_functions[rule.endpoint](**req.view_args) File "/opt/tvhproxy/tvhProxy.py", line 54, in lineup for c in _get_channels(): TypeError: 'NoneType' object is not iterable ::ffff:192.168.1.125 - - [2019-06-13 14:44:34] "GET /lineup.json HTTP/1.0" 500 431 0.006466 same here -----edit----- it's working tvheadend on br0 (added user and password) tvhproxy on br0 (different ip, + user and password and tvheadendip and port) plex (from linuxservers) on bridge, tvhproxy tv tuner showed up automatically my problem: i tested with only a few channels. now i added some more but they won't show up in plex. the new added channels in tvheadend won't show up in plex. i restarted tvheadend, tvhproxy and plex but no change. -----edit----- now working. forget to give numbers to the channels in tvheadend. the new ones had all 0. changed it to different numbers and they showed up in Plex. Edited February 28, 2021 by Schicksal Quote Link to comment
Haugi Posted May 25, 2021 Share Posted May 25, 2021 Hi, i have some issues with the Onlyoffice Server Docker. I get this Error after opening a document and try to edit and safe it for a couple minutes: ==> /var/log/onlyoffice/documentserver/docservice/out.log <== [2021-05-25T17:56:50.175] [WARN] nodeJS - error description: docId = 1817512848 errorId = Update Version error I use: Nextcloud Docker NGINX Proxy manager Can you help me here? BR Christian Quote Link to comment
TangoEchoAlpha Posted July 13, 2021 Share Posted July 13, 2021 On 1/7/2019 at 12:32 PM, amardilo said: However when I try to setup the TVHProxy container (running on it's own IP) I get a Internal Server Error message when I try to visit it's IP (both on port 80 and 5004) by going to the lineup.json page. I also tried the plextvheadend container (running on the same IP as TVHProxy - although I don't run plextvheadend and TVHProxy at the same time) and when I goto lineup.json I just get an empty json file. The logs on Unraid (version 6.6.6) for both proxy containers don't show any errors that I can see. When I try Plex and use the <IP>:<Port> or just <IP> for either proxy container It can't find anything. Hi Amardilo - did you ever get anywhere with this? I'm having the sam problems. My Plex server is the binhex-plex docker, running on network type 'host'. I can connect to Plex via the web GUI from the dockers page, or stream from Plex via other devices on my network - so that's good. My tvheadend server is running on a Raspberry Pi with a TV HAT. I can access the tvheadend GUI via 192.168.1.131:9981 and then login. I know there's a good connection between the Pi and Unraid as tvheadend records to a share on Unraid 🙂 I am a bit stumped as to what the problem might be and the TVHProxy container doesn't show anything in the logs at all. Quote Link to comment
alturismo Posted July 13, 2021 Share Posted July 13, 2021 i dont use tvhproxy anymore for this usecase as i switched, but may some points docker settings in unraid, allow network access to host should be enabled so plex and tvhproxy can comunicate and about tvh usage with password, read about it howto, there where some steps to take sometimes, read about auth type plain and digest, has nothing todo when using the web gui but when using apps or scripts to fetch the m3u. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.