itimpi Posted December 16, 2019 Share Posted December 16, 2019 11 minutes ago, Shomil Saini said: I have no Idea, if someone has any clue please HELP! You should provide your system diagnostics zip file (obtained via Tools->Diagnostics) attached to your NEXT post to give us a chance of seeing what is going on. Quote Link to comment
Unraid-arr Posted December 16, 2019 Share Posted December 16, 2019 51 minutes ago, itimpi said: You should provide your system diagnostics zip file (obtained via Tools->Diagnostics) attached to your NEXT post to give us a chance of seeing what is going on. @itimpi - Thanks for chiming in, here you go with the diagnostic zip. I hope this helps narrow down the issue. Thanks, Shomil zeus-diagnostics-20191216-0450.zip Quote Link to comment
itimpi Posted December 16, 2019 Share Posted December 16, 2019 3 minutes ago, Shomil Saini said: I hope this helps narrow down the issue. The diagnostics appear to be just after a reboot. We really want some that cover a period when you are experiencing the problem. Quote Link to comment
Unraid-arr Posted December 16, 2019 Share Posted December 16, 2019 (edited) 5 minutes ago, itimpi said: The diagnostics appear to be just after a reboot. We really want some that cover a period when you are experiencing the problem. I have been moving a few files from cache to drives after the reboot using Krusader, that is how I realized the issue and it has been a pain. This is just after the first reboot from upgrading to 6.8.0 couple of hours ago. I can send some logs your way tomorrow evening if you would be ok waiting. -Shomil Edited December 16, 2019 by Shomil Saini Typo/Better Wording Quote Link to comment
limetech Posted December 16, 2019 Author Share Posted December 16, 2019 7 hours ago, Shomil Saini said: Since upgrading from version 6.6.6 (~110Mbps) to 6.7.2(~80Mbps) and now to 6.8.0(~20Mbps) the write speeds on transfers between internal drives have really gone to the gutter. Even after removing my parity drives the results are same. One file transfer halts the complete system and everything from UI to Dockers is unresponsive to the extent that I have to leave it for the transfer to complete. Plex stops streaming and starts screaming. I have no Idea, if someone has any clue please HELP! Also, same is true for transfers between my PC to Server over Gigabit LAN. No Shares have Cache enabled, there is no parity drives while I am struggling with this. Rest of the build is in my signature below. Thanks in Advance! -SS Please open a separate bug report for this. Quote Link to comment
golli53 Posted December 16, 2019 Share Posted December 16, 2019 On 12/15/2019 at 7:49 AM, bwnautilus said: I've notice performance problems with SMB shares from Windows 10 clients. Directory scanning takes about twice as long. I rolled back to 6.7.2 and the problems went away. I noticed there's an updated SMB protocol in the release notes for 6.8.0. Are there any SMB settings I can tweak in 6.8.0? Known issue - follow here: 1 Quote Link to comment
chris1259 Posted December 16, 2019 Share Posted December 16, 2019 (edited) noVNC encountered an error: SyntaxError: import not found: supportsImageMetadata https://ServerName/plugins/dynamix.vm.manager/novnc/core/display.js:11:9 VNC driver: QXL Accessed WebGUI with Firefox v71.0 x64, Java 8 Update 231 x64 and Windows 10 1909 x64 (fully patched). Upgraded 3 servers from v6.7.2 to v6.8.0 without issue. One of the 3 servers displays this error when trying to VNC to any virtual machine through the WebGUI. Rebooting the server fixed it for the first connection, but then displayed the error again on additional attempts. I don't see any complaints about this in the system log, and I have not tried this from another machine yet. Is dynamix.vm.manager included in unRaid? Because the only plugins installed in December 2019 are Enhanced Log Viewer & Unassigned Devices. Off topic... Logs\libvirt.txt in the diagnostics log shows all of my VM's as "tainted". I found a thread here with a fix for it, but i already have the correct path to libvirt.img. Another thread says it's normal. No issues with the VM's. Edit: This is working fine from another machine. It might just be an issue with Java. Weird that it works fine on one server but not the other. Edited December 17, 2019 by chris1259 Quote Link to comment
maxse Posted December 17, 2019 Share Posted December 17, 2019 Guys, having issues and can’t upgrade! It seems that unraid is switching the ip to 169.254.249.255 instead of my internal network of 192.168.1.0/24 and I can’t access it. Had to attach my monitor. It also says cannot find device bond0 not sure why this is happening it’s never happened before. Quote Link to comment
trurl Posted December 17, 2019 Share Posted December 17, 2019 3 minutes ago, maxse said: ip to 169.254.249.255 This means it isn't getting DHCP. Check your ethernet connection. Quote Link to comment
maxse Posted December 17, 2019 Share Posted December 17, 2019 All connected perfect. Worked fine during the update in the GUI Quote Link to comment
maxse Posted December 17, 2019 Share Posted December 17, 2019 I loaded a backup onto the flash and worked fine Quote Link to comment
trurl Posted December 17, 2019 Share Posted December 17, 2019 5 minutes ago, maxse said: I loaded a backup onto the flash and worked fine So do you mean it is working correctly now with the new version? Quote Link to comment
maxse Posted December 17, 2019 Share Posted December 17, 2019 No. I have a previous backup of the flash. When I load that back on the flash. It works fine. The previous backed up version Quote Link to comment
trurl Posted December 17, 2019 Share Posted December 17, 2019 OK, then back to this: 19 minutes ago, maxse said: Guys, having issues and can’t upgrade! It seems that unraid is switching the ip to 169.254.249.255 instead of my internal network of 192.168.1.0/24 and I can’t access it. Had to attach my monitor. It also says cannot find device bond0 not sure why this is happening it’s never happened before. Post a diagnostic from after the upgrade. Quote Link to comment
maxse Posted December 17, 2019 Share Posted December 17, 2019 (edited) I can’t login to unraid after upgrade. Only the command prompt Edited December 17, 2019 by maxse Quote Link to comment
BRiT Posted December 17, 2019 Share Posted December 17, 2019 (edited) 22 minutes ago, maxse said: I can’t login to unraid after upgrade. Only the command prompt Yeah, as they said, at the command prompt type 'diagnostics' to produce the diagnostics file at /boot/logs/machinename-diagnostics-yyyymmdd-hhMM.zip. for instance /boot/logs/tower-diagnostics-20191216-2115.zip diagnostics Edited December 17, 2019 by BRiT Quote Link to comment
maxse Posted December 17, 2019 Share Posted December 17, 2019 So I just re-assigned the drives from my flash backup tried again and it started right up! Thanks guys! Quote Link to comment
maxse Posted December 17, 2019 Share Posted December 17, 2019 (edited) solved Edited December 17, 2019 by maxse Quote Link to comment
johnieutah Posted December 17, 2019 Share Posted December 17, 2019 (edited) Hello. Unfortunately after upgrading from the last stable version 6.7 I believe, I can no longer reach the server at all. Putty won’t connect... it appears the server is not being allocated an IP address by my router. I did have issues doing the upgrade and had to try 3 times in order to get the process through. See pic for where it got stuck. Edited December 17, 2019 by johnieutah Quote Link to comment
Frank1940 Posted December 17, 2019 Share Posted December 17, 2019 (edited) 15 minutes ago, johnieutah said: Hello. Unfortunately after upgrading from the last stable version 6.7 I believe, I can no longer reach the server at all. Putty won’t connect... it appears the server is not being allocated an IP address by my router. I did have issues doing the upgrade and had to try 3 times in order to get the process through. Connect a monitor and keyboarf up to the server. If there is a lgon prompt, login and get a Diagnostics file by type the following a comand line. diagnostics Otherwise, get a photo of what is on the monitor. (Be sure it can be read!) Edited December 17, 2019 by Frank1940 Quote Link to comment
johnieutah Posted December 17, 2019 Share Posted December 17, 2019 20 minutes ago, Frank1940 said: Connect a monitor and keyboarf up to the server. If there is a lgon prompt, login and get a Diagnostics file by type the following a comand line. diagnostics Otherwise, get a photo of what is on the monitor. (Be sure it can be read!) Here you go, live from the technik room... Quote Link to comment
JorgeB Posted December 17, 2019 Share Posted December 17, 2019 2 minutes ago, johnieutah said: Here you go, live from the technik room... That's usually a flash drive problem, backup the flash drive's config folder, recreate it using the USB tool and restore the config from backup overwriting existing files, if it still doesn't boot try recreating the manual way. Quote Link to comment
johnieutah Posted December 17, 2019 Share Posted December 17, 2019 1 hour ago, johnnie.black said: That's usually a flash drive problem, backup the flash drive's config folder, recreate it using the USB tool and restore the config from backup overwriting existing files, if it still doesn't boot try recreating the manual way. Thanks for the advice. This unfortunately lead to the next problem... Quote Link to comment
Draic Posted December 18, 2019 Share Posted December 18, 2019 why is every connection to the server now a forced redirect to the login page? I want to access a local service that has nothing to do with unraid, but cannot access it as the link gets redirected to the new login. how can I disable this? Quote Link to comment
limetech Posted December 18, 2019 Author Share Posted December 18, 2019 1 hour ago, Draic said: why is every connection to the server now a forced redirect to the login page? I want to access a local service that has nothing to do with unraid, but cannot access it as the link gets redirected to the new login. how can I disable this? Please open a separate bug report with an example. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.