scud133b Posted December 30, 2020 Share Posted December 30, 2020 On 12/28/2020 at 11:05 AM, Roxedus said: Pretty sure you do that in the same variable > redis://username:password@[IP]:6379 This is true but I discovered one slight modification; redis doesn't usually have a username so you actually leave it blank before that colon. So it will be: redis://:password@[IP]:6379 1 Quote Link to comment
gxs Posted December 31, 2020 Share Posted December 31, 2020 Hey Guys I'm struggling with paperless. When uploading through any web browser the only thing I get is "An error has occurred while uploading the document. Sorry!". I have tried using shares for file location, my personal folder inside a share but whatever I do it doesn't work. I have to be missing something. The logs are empty so I don't even know where to check. Quote Link to comment
CorneliousJD Posted January 1, 2021 Share Posted January 1, 2021 15 hours ago, gxs said: Hey Guys I'm struggling with paperless. When uploading through any web browser the only thing I get is "An error has occurred while uploading the document. Sorry!". I have tried using shares for file location, my personal folder inside a share but whatever I do it doesn't work. I have to be missing something. The logs are empty so I don't even know where to check. I had this issue with one specific document, it worked with others though, I think it had something to do with how the PDF was saved/malformed or something. For this one already-existing PDF I had, I just ended up printing it and scanning it back in and that worked fine. I have a scanner setup to scan via FTP to my consume folder, and use the Paperless-App to scan documents on mobile devices that upload straight into my Paperless-NG instance. I guess try some other files, or try scanning a file and putting it into your consume folder instead of the web UI's upload, see what happens with that? PS - All this is for Paperless-ng which I assume you're also talking about, the OG paperless has it's own support thread. Quote Link to comment
T0a Posted January 1, 2021 Share Posted January 1, 2021 15 hours ago, gxs said: Hey Guys I'm struggling with paperless. When uploading through any web browser the only thing I get is "An error has occurred while uploading the document. Sorry!". I have tried using shares for file location, my personal folder inside a share but whatever I do it doesn't work. I have to be missing something. The logs are empty so I don't even know where to check. Are the web UI logs and the docker logs are both empty? Have you checked the javascript console of the browser? Do you find an issue there? Does the document contain sensitive information? I'm asking because the previous question aren't no help then you could open an issue in the paperless-ng repository. Quote Link to comment
RinkyDinkBear Posted January 2, 2021 Share Posted January 2, 2021 On 12/30/2020 at 9:52 PM, scud133b said: This is true but I discovered one slight modification; redis doesn't usually have a username so you actually leave it blank before that colon. So it will be: redis://:password@[IP]:6379 gold star Quote Link to comment
nextgenpotato Posted January 2, 2021 Share Posted January 2, 2021 On 12/30/2020 at 9:25 AM, T0a said: Yes, see here. Make sure you create a backup first. Thanks! Before I saw this, I did the steps below and it worked. The official docs in there are not unraid specific so you will have to figure out some details yourself. 1- I copied the sqldb file from paperless to paperless-ng location 2- I copied the pdfs from paperless to paperless-ng location 3- I ran the commmand "python3.7 manage.py document_index reindex" on the docker console (for example it's not clear you can run this command this way on the official docs) However multiple user scenarios don't work at the moment, I think I need to switch to postgresql as well Quote Link to comment
T0a Posted January 2, 2021 Share Posted January 2, 2021 (edited) Dear paperless-ng fellows, we now have a dedicated paperless-ng support thread. Come over and share your setup or get help with your paperless-ng instance. See you there. Edited January 2, 2021 by T0a 1 Quote Link to comment
gxs Posted January 3, 2021 Share Posted January 3, 2021 On 1/1/2021 at 4:07 PM, CorneliousJD said: I guess try some other files, or try scanning a file and putting it into your consume folder instead of the web UI's upload, see what happens with that? I tried with TXT, PDF, Word,... Error is all the same. It just doesn't upload anything. Quote Link to comment
gxs Posted January 3, 2021 Share Posted January 3, 2021 On 1/1/2021 at 4:13 PM, T0a said: Are the web UI logs and the docker logs are both empty? Yup. No errors or anything. There is stuff logged but no errors. The documents just don't upload. Quote Link to comment
T0a Posted January 4, 2021 Share Posted January 4, 2021 5 hours ago, gxs said: Yup. No errors or anything. There is stuff logged but no errors. The documents just don't upload. Do you have Redis installed as container and configured in the paperless-ng template? Quote Link to comment
njdowdy Posted January 11, 2021 Share Posted January 11, 2021 (edited) On 8/27/2020 at 9:30 AM, GilbN said: Check your container logs !SOLVED: see below if you have this problem Sorry to be such a noob, but I'm also have trouble with finding the default user and password. I'm aware the documentation states that these are logged to STDOUT, however I cannot seem to find any credentials in the logs. I checked the container logs with: docker logs Mango > /boot/MangoLog.txt Which yields only: _| _| _|_| _|_| _|_|_| _|_|_| _|_|_| _|_| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _|_|_| _| _| _|_|_| _|_| _| _|_| Mango - Manga Server and Web Reader. Version 0.18.2 ^[[93m[INFO] ^[[0m2021/01/11 20:35:28 | Starting DB optimization ^[[93m[INFO] ^[[0m2021/01/11 20:35:28 | DB optimization finished ^[[93m[INFO] ^[[0m2021/01/11 20:35:28 | Scanned 0 titles in 4.195587ms ^[[93m[INFO] ^[[0m2021/01/11 20:36:28 | Starting thumbnail generation ^[[93m[INFO] ^[[0m2021/01/11 20:36:28 | Thumbnail generation finished ^[[93m[INFO] ^[[0m2021/01/11 20:40:28 | Scanned 0 titles in 2.073916ms Finally, from the console of the container, I tried: find . -name "*stdout*" and only found "./dev/stdout". However, I can't access it from unraid with: docker cp Mango:dev/stdout /boot/mango.stdout And from within the container: cat stdout yields no information. Finally, I changed the log_level to "debug" and tried "admin" as a username. Apparently that is the username, however I don't know the password. _| _| _|_| _|_| _|_|_| _|_|_| _|_|_| _|_| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _| _|_|_| _| _| _|_|_| _|_| _| _|_| Mango - Manga Server and Web Reader. Version 0.18.2 [96m[DEBUG] [0m2021/01/11 21:08:00 | We are in release mode. Using embedded static files. [96m[DEBUG] [0m2021/01/11 21:08:00 | Starting Kemal server [93m[INFO] [0m2021/01/11 21:08:00 | Starting DB optimization [93m[INFO] [0m2021/01/11 21:08:00 | DB optimization finished [96m[DEBUG] [0m2021/01/11 21:08:00 | Scan completed [93m[INFO] [0m2021/01/11 21:08:00 | Scanned 0 titles in 3.915386ms [96m[DEBUG] [0m2021/01/11 21:08:12 | 302 GET / 836.62µs [96m[DEBUG] [0m2021/01/11 21:08:12 | 200 GET /login 36.27µs [96m[DEBUG] [0m2021/01/11 21:08:12 | 200 GET /css/mango.css 49.43µs [96m[DEBUG] [0m2021/01/11 21:08:12 | 200 GET /css/uikit.css 1.69ms [96m[DEBUG] [0m2021/01/11 21:08:12 | 200 GET /js/common.js 39.77µs [96m[DEBUG] [0m2021/01/11 21:08:12 | 200 GET /js/fontawesome.min.js 261.47µs [96m[DEBUG] [0m2021/01/11 21:08:12 | 200 GET /js/uikit.min.js 654.11µs [96m[DEBUG] [0m2021/01/11 21:08:12 | 200 GET /js/uikit-icons.min.js 418.27µs [96m[DEBUG] [0m2021/01/11 21:08:12 | 200 GET /js/solid.min.js 18.33ms [96m[DEBUG] [0m2021/01/11 21:08:16 | Password does not match the hash [96m[DEBUG] [0m2021/01/11 21:08:16 | 302 POST /login 139.43ms [96m[DEBUG] [0m2021/01/11 21:08:16 | 200 GET /login 32.36µs [96m[DEBUG] [0m2021/01/11 21:08:16 | 200 GET /css/uikit.css 820.8µs [96m[DEBUG] [0m2021/01/11 21:08:16 | 200 GET /css/mango.css 42.45µs [96m[DEBUG] [0m2021/01/11 21:08:16 | 200 GET /js/fontawesome.min.js 273.5µs [96m[DEBUG] [0m2021/01/11 21:08:16 | 200 GET /js/common.js 49.3µs [96m[DEBUG] [0m2021/01/11 21:08:16 | 200 GET /js/uikit.min.js 640.04µs [96m[DEBUG] [0m2021/01/11 21:08:16 | 200 GET /js/uikit-icons.min.js 328.12µs [96m[DEBUG] [0m2021/01/11 21:08:16 | 200 GET /js/solid.min.js 9.39ms Is there some other log I'm supposed to be looking for to find the password? Thank you!! SOLUTION: I never did find the default password posted anywhere. However, this approach worked for me. 1. Edit the config file in appdata so that "disable_login" is "true" and "default_username" is "admin". Save. 2. Restart container. 3. You will now be logged in. You can use the user management options to change the admin password now. 4. Edit the config file in appdata to return "disable_login" is "false" and "default_username" is "". Save. 5. Restart container. Edited January 11, 2021 by njdowdy SOLVED Quote Link to comment
JasonK Posted January 13, 2021 Share Posted January 13, 2021 (edited) youtube-dl-material Is there a way to rate limit the download speeds? i.e. can I set it to 1MB/sec max or is the only option to let it take what it can take? I couldn't find anything in the settings inside the app. edit: added the -r option in custom args: Saved the setting. However, when trying to download, the following is showing in the log: 2021-01-13T16:34:25.163Z ERROR: Error while retrieving info on video with URL https://www.youtube.com/c/TED/videos with the following message: Error: Command failed with exit code 2: node_modules/youtube-dl/bin/youtube-dl -i --dump-json -o video/%(title)s.mp4 --write-info-json --print-json -f bestvideo+bestaudio --merge-output-format mp4 --write-thumbnail -r 250K https://www.youtube.com/c/TED/videos 2021-01-13T16:34:25.163Z ERROR: Usage: youtube-dl [OPTIONS] URL [URL...] youtube-dl: error: invalid rate limit specified Asny idea why it's reporting invalid rate limit? per the github docs for youtube-dl, -r 250K should be fine. Edited January 13, 2021 by JasonK Quote Link to comment
BlueRyuu Posted January 16, 2021 Share Posted January 16, 2021 Has anyone tried the Shinobi docker? Just installed it and I can't add users to it on the Super url. It just won't save if I try to add an user. Quote Link to comment
SPOautos Posted January 17, 2021 Share Posted January 17, 2021 (edited) Hello, I just installed CrushFTP and just am curious about security. All I did was install Crushftp from the CA....is it secure that way? Is there anything I should do to make sure it is secure? I literally know nothing about security but I need to make sure its secure, I'll be sending sensitive information to it. Edited January 17, 2021 by SPOautos Quote Link to comment
Yivey_unraid Posted January 17, 2021 Share Posted January 17, 2021 (edited) Can't access web-UI with VPN? Hi! Been using Speedtest-tracker now for a while and very pleased. Thank you! Figured yesterday that I would try to put it behind my VPN to see what speed I actually get. I have all my downloading containers mapped through binhex-qbittorrent-vpn, so I thought I would map a new speedtest-tracker container through qBit also. But can't get it to work. I'm fairly noob with this so I have probably just made a turd of everything 😁 This is how I tried to set it up: Mapped :8766 in qBittorrent for speedtest-tracker (named it "speedtest-tracker-vpn" to keep them apart) Added "--net=container:binhex-qbittorrentvpn" to 'Extra Parameters' but not sure if it's ok to just add that with a space after "--restart unless-stopped"? Changed 'Network Type' to "None". Also choose :8766 as port to not interfere with :8765 that the normal speedtest-tracker use. The container starts and seems to run but I can't access the web-UI? Any ideas? Edited January 17, 2021 by kim_sv fixed urls for pics Quote Link to comment
WexfordStyle Posted January 23, 2021 Share Posted January 23, 2021 (edited) I am wondering if anyone is using intel quicksync with the Shinobi docker? I see there is inclusion of a variable for passing through your nvidia gpu but cant find any documentation on using intels igpu. Is anyone doing this that can advise on how to get this working? I know that you can use the below on regular linux with docker for things like plex. Does the same appy for Shinobi? --device=/dev/dri:/dev/dri Edited January 23, 2021 by WexfordStyle Quote Link to comment
njdowdy Posted January 23, 2021 Share Posted January 23, 2021 (edited) On 9/18/2020 at 5:51 PM, jonathanm said: Sorry, I already readded all the subscriptions. I only have the default log level set, so I wasn't expecting much info there. When I went to the subs page, it displayed the same message of no items for both playlists and subscriptions, I've never put in any playlists, but the message was displayed for both. When I readded the subs, they showed up properly, both on the left column and the subs list. One anomaly to note is that even though adding the sub closes the add sub popup, the new sub doesn't show in the list until the browser is refreshed. At the moment I'm getting the 429 too many requests, so I've shut down the container until tomorrow, I'll post back. Prior to shutting down I added a cookie and a youtube API key and the 429's continued, but I don't know if that makes a difference once the 429 is already happening. Did the "too many requests" issue resolve for you? I'm in the same boat. Can I ask how you added the cookie and youtube API to the docker? NOTE: I have a cookies.txt from the firefox extension and an API key. Just wondering how to input into the template. Thanks! Edited January 23, 2021 by njdowdy Added an addendum. Quote Link to comment
JonathanM Posted January 23, 2021 Share Posted January 23, 2021 3 minutes ago, njdowdy said: Did the "too many requests" issue resolve for you? I'm in the same boat. Can I ask how you added the cookie and youtube API to the docker? NOTE: I have a cookies.txt from the firefox extension and an API key. Just wondering how to input into the template. Thanks! Sorry, I removed the API and cookie because I couldn't get them to make a difference. What does make a difference is changing the IP the container is going through every couple days whenever I get 429'd, typically every 36 to 48 hours. I'm already using a VPN container, so I just changed this container to network none and added --net=container:<name of vpn container> to the extra parameters line. Whenever I restart the vpn container it gets a new external IP. It's a little inconvenient, but it works. I suppose if I get too irritated I'll script something that watches for 429 in the log, and restarts both containers. I asked the container author to code a modification that would stop hammering the servers after the first few 429's, but that didn't seem to get any traction. Ideally it would watch for a 429, pause and show a notification in the app for a short interval, restart, if there was a 429 again, pause for double the interval, etc. Reset whenever the container is restarted. Apparently there aren't very many heavy users that get frequent 429s. 1 Quote Link to comment
Banuseka Posted January 24, 2021 Share Posted January 24, 2021 On 12/15/2020 at 5:28 PM, JC2020 said: I am having trouble with Deemix as well. I removed and re-added via CA and get the "python3: can't open file '/deemix/server.py': [Errno 2] No such file or directory" CA has: https://registry.gitlab.com/bockiii/deemix-docker as the docker hub URL, but it returns 404 error. I removed and installed it several times, and than suddenly it worked again... Dunno why but it is working now since couple of weeks. Quote Link to comment
Roxedus Posted January 24, 2021 Author Share Posted January 24, 2021 On 1/17/2021 at 1:15 PM, kim_sv said: Can't access web-UI with VPN? Hi! Been using Speedtest-tracker now for a while and very pleased. Thank you! Figured yesterday that I would try to put it behind my VPN to see what speed I actually get. I have all my downloading containers mapped through binhex-qbittorrent-vpn, so I thought I would map a new speedtest-tracker container through qBit also. But can't get it to work. I'm fairly noob with this so I have probably just made a turd of everything 😁 This is how I tried to set it up: Mapped :8766 in qBittorrent for speedtest-tracker (named it "speedtest-tracker-vpn" to keep them apart) Added "--net=container:binhex-qbittorrentvpn" to 'Extra Parameters' but not sure if it's ok to just add that with a space after "--restart unless-stopped"? Changed 'Network Type' to "None". Also choose :8766 as port to not interfere with :8765 that the normal speedtest-tracker use. The container starts and seems to run but I can't access the web-UI? Any ideas? You cannot change ports when using the --network argument, it behaves similarly to host. you would have to use port 80. 1 Quote Link to comment
JonathanM Posted January 24, 2021 Share Posted January 24, 2021 59 minutes ago, Roxedus said: You cannot change ports when using the --network argument, it behaves similarly to host. you would have to use port 80. You can however, use the container mapping of the qbit container. So, assuming the speedtest app is listening on 80, you should be able to add a mapping to qbit with container of 80 and host of whatever you want that isn't in use, and the speedtest app should answer on that port. Quote Link to comment
JonathanM Posted January 26, 2021 Share Posted January 26, 2021 I wrote a quick little script to deal with my specific 429 errors. If you are routing youtubedl through one of the vpn enabled containers, this should work for you with some modifications. #!/bin/bash # This script will attempt to get a new IP for the Youtube DL Material container. # It assumes you are using the binhex-delugevpn for your connection, and already # have that process working, by setting youtube-dl-material network to none, # and adding --net=container:binhex-delugevpn to the Extra Parameters: field. # You also have to add a mapping for port 17442 to binhex-delugevpn container # and use your own shortcut to access the WebGUI for Youtube DL Material. # If you are using a different VPN enabled container you will need to alter this # script for your specific setup. If you don't want to be notified, comment out # the /usr/local/emhttp/webGui/scripts/notify line. # Set this script to run however often you want to check for 429 errors if docker ps | grep -q youtube-dl-material then echo "Youtube DL Material container running, checking for error 429" if /usr/bin/docker logs youtube-dl-material --tail 1 | /usr/bin/grep -q "HTTP Error 429" then echo "Restarting VPN container and Youtube DL Material" echo "_stopping Youtube DL Material" /usr/bin/docker stop --time=60 youtube-dl-material echo "_restarting Binhex DelugeVPN" /usr/bin/docker restart --time=60 binhex-delugevpn echo "_waiting 5 minutes" sleep 300 echo "_starting Youtube DL Material" /usr/bin/docker start youtube-dl-material echo "_sending notifications" /usr/local/emhttp/webGui/scripts/notify -s "Youtube DL Material restarted" -i "warning" -m "Too many requests error detected" -d "Too many requests error detected" else echo "No 429 error found" fi else echo "Youtube DL Material container not running" fi Quote Link to comment
njdowdy Posted January 26, 2021 Share Posted January 26, 2021 7 hours ago, jonathanm said: I wrote a quick little script to deal with my specific 429 errors. If you are routing youtubedl through one of the vpn enabled containers, this should work for you with some modifications. #!/bin/bash # This script will attempt to get a new IP for the Youtube DL Material container. # It assumes you are using the binhex-delugevpn for your connection, and already # have that process working, by setting youtube-dl-material network to none, # and adding --net=container:binhex-delugevpn to the Extra Parameters: field. # You also have to add a mapping for port 17442 to binhex-delugevpn container # and use your own shortcut to access the WebGUI for Youtube DL Material. # If you are using a different VPN enabled container you will need to alter this # script for your specific setup. If you don't want to be notified, comment out # the /usr/local/emhttp/webGui/scripts/notify line. # Set this script to run however often you want to check for 429 errors if docker ps | grep -q youtube-dl-material then echo "Youtube DL Material container running, checking for error 429" if /usr/bin/docker logs youtube-dl-material --tail 1 | /usr/bin/grep -q "HTTP Error 429" then echo "Restarting VPN container and Youtube DL Material" echo "_stopping Youtube DL Material" /usr/bin/docker stop --time=60 youtube-dl-material echo "_restarting Binhex DelugeVPN" /usr/bin/docker restart --time=60 binhex-delugevpn echo "_waiting 5 minutes" sleep 300 echo "_starting Youtube DL Material" /usr/bin/docker start youtube-dl-material echo "_sending notifications" /usr/local/emhttp/webGui/scripts/notify -s "Youtube DL Material restarted" -i "warning" -m "Too many requests error detected" -d "Too many requests error detected" else echo "No 429 error found" fi else echo "Youtube DL Material container not running" fi Actually, I was going to figure out how to set up a VPN container, but then I discovered how to pass the youtube API key and cookies.txt from within the youtube-dl container. Once I did that, the problems stopped. At least, for now! I also saw there are some options in there to include a sleep interval between downloads to keep the requests/time lower. Thanks! Quote Link to comment
JonathanM Posted January 26, 2021 Share Posted January 26, 2021 1 hour ago, njdowdy said: Actually, I was going to figure out how to set up a VPN container, but then I discovered how to pass the youtube API key and cookies.txt from within the youtube-dl container. Once I did that, the problems stopped. At least, for now! I also saw there are some options in there to include a sleep interval between downloads to keep the requests/time lower. Thanks! Well, if you want you could always comment out 90% of the code and use the script to notify you if you are 429'd again. 🙂 1 Quote Link to comment
Spucoly Posted January 27, 2021 Share Posted January 27, 2021 What causes this message in Shinobi? "[aac @ 0x55ec070ab8c0] Queue input is backward in time" Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.