aidenpryde Posted September 26, 2021 Share Posted September 26, 2021 On 2/21/2021 at 1:15 PM, CorneliousJD said: Here's my setup screenshots, hope it helps! AMP/Configuration/Networking Valheim Instance Ports Then in Valheim instance, configuration, server, you can set your wold name, seed, and password (must have password from everything I'm reading i think?) Then forward ports 2456-2458 *UDP* through your firewall, or to test locally just connect to your unraid IP running AMP on port 2457 (the actual port it uses to connect). e.g. 192.168.1.100:2457 So I've followed these settings and nothing I try allows it to connect over the local LAN. What are your settings for AMP's networking itself? Like the Default AMP IP binding, Default Application IP Binding, Docker External IP? Did you set up the container in Bridge mode? Quote Link to comment
Sporical Posted October 20, 2021 Share Posted October 20, 2021 I cannot seem to get WinSCP to connect to my minecraft instance. No matter what information I put in it just doesn't seem to connect. Network Error: Connection to "servername" timed out. I am using a proxy if that matters. I really want to transfer a world file over to my server but it seems I cannot do that through the web gui for amp or WinSCP. What is happening? Quote Link to comment
Nanobug Posted October 20, 2021 Share Posted October 20, 2021 5 hours ago, Sporical said: I cannot seem to get WinSCP to connect to my minecraft instance. No matter what information I put in it just doesn't seem to connect. Network Error: Connection to "servername" timed out. I am using a proxy if that matters. I really want to transfer a world file over to my server but it seems I cannot do that through the web gui for amp or WinSCP. What is happening? Did you open the corrosponding ports in your router? Quote Link to comment
MightyLional Posted October 26, 2021 Share Posted October 26, 2021 anyway to update the container? trying to use it for satisfactory. Quote Link to comment
ra1k_0 Posted October 27, 2021 Share Posted October 27, 2021 (edited) 33 minutes ago, MightyLional said: anyway to update the container? trying to use it for satisfactory. I'm in the same boat. I've had a few commands from CubeCoders (speaking on reddit) but none have seemed to work. EDIT: Just fixed it. Make sure not to be on the nightly release then run: ampinstmgr --nocache upgradeall Edited October 27, 2021 by ra1k_0 Quote Link to comment
MightyLional Posted October 28, 2021 Share Posted October 28, 2021 has anyone got the docker working with satisfactory. i cant seem to find the server in game. with local or external ip Quote Link to comment
Entxawp Posted October 28, 2021 Share Posted October 28, 2021 I need to extract the save file but it says it's no longer there /home/amp/.config/Epic/FactoryGame/Saved/SaveGames/ Quote Link to comment
Nanobug Posted October 29, 2021 Share Posted October 29, 2021 14 hours ago, Entxawp said: I need to extract the save file but it says it's no longer there /home/amp/.config/Epic/FactoryGame/Saved/SaveGames/ Have you tried checking from the WebUI? Quote Link to comment
Archannad Posted November 30, 2021 Share Posted November 30, 2021 Hey been a short while since I've used AMP, but after returning and changing nothing (aside from updating the docker) my server no longer appears to work. Running the command "ampinstmgr ports [instance name]" doesn't show the game's port of 25565 (Minecraft server) at all, so I really am at a loss. Unfortunately, I can't work out what the issue is from the logs as I can't see any difinitive error as the server seems to still launch. The issue here, is that I can't even connect to the server from the local network (which is all it is being used for - private server) so port forwarding isn't an issue (even though ports ARE forwarded as I've had a few friends on there before now). The strange thing is that I've changed nothing, no one else has access to the server and yet the server which was working a few months ago is now no longer possible to connect to... Have asked on their forum, but asking here as well. Post quoted below: Hi all, just recently since returning to Minecraft and dusting off my AMP docker on Unraid (which was previously working flawlessly) I can no longer connect to ANY of my servers, even ones that have had no configuration changes. Key Details: OS: Unraid 6.9.2 (Docker Container) AMP Version: 2.3.0.4 So far, I've tried following the guide linked here: https://github.com/CubeCoders/AMP/wiki/Diagnosing-Connectivity-Issues to no avail. Whenever I spin up one of the instances and start the server up, the designated port of 25565 is never showing as listening and unfortunately I cannot discern the AMP logs and find the issue myself, hence why I'm coming here after a few days of looking myself. This error persists on a previously used server that has been untouched using port 25570. I've confirmed this is not isolated to this instance, as I have made brand-new instances and the error is repeatable on my end. The error I get on my client is the following: io.netty.channel.connecttimeoutexception connection refused This is despite being on the same network, and with all necessary ports forwarded for good measure. Quote Link to comment
hawolex Posted December 27, 2021 Share Posted December 27, 2021 Have downloaded this docker image in to my Unradi server. adden my key. but not changed any other config to start with. I get the web interface but can`t log in. even i don`t change admin password combo it fails. the startup log tels me nothing new. i usually run my AMP cluster on native ubuntu but wanna try this. it the login bug on my end or i know one. fix? Quote Link to comment
CorneliousJD Posted December 27, 2021 Author Share Posted December 27, 2021 6 hours ago, hawolex said: Have downloaded this docker image in to my Unradi server. adden my key. but not changed any other config to start with. I get the web interface but can`t log in. even i don`t change admin password combo it fails. the startup log tels me nothing new. i usually run my AMP cluster on native ubuntu but wanna try this. it the login bug on my end or i know one. fix? You either set your default user/password in the container itself, otherwise it will default to admin//password -- have you tried both what you entered and admin//password, and it still wont let you in? Quote Link to comment
hawolex Posted December 27, 2021 Share Posted December 27, 2021 23 minutes ago, CorneliousJD said: You either set your default user/password in the container itself, otherwise it will default to admin//password -- have you tried both what you entered and admin//password, and it still wont let you in? Yes i chaged it the first time. "wrong password" so started a new container and used the standar setting username: admin and password : password. Still no accsess. But the amp itself are running and i can use the terminal, elevate amp and see status. and i get the website loginscreen like usual Quote Link to comment
CorneliousJD Posted December 27, 2021 Author Share Posted December 27, 2021 7 minutes ago, hawolex said: Yes i chaged it the first time. "wrong password" so started a new container and used the standar setting username: admin and password : password. Still no accsess. But the amp itself are running and i can use the terminal, elevate amp and see status. and i get the website loginscreen like usual Interesting, when you started up a new container did you delete all previouse appdata for the old AMP container? If not, try just pointing it to a new appdata folder (e.g. /mnt/user/appdata/amp2) and try again, this will ensure a fresh data folder w/ no leftover inherited settings. Quote Link to comment
DG1M Posted January 9, 2022 Share Posted January 9, 2022 I'm attempting to configure this using custom : br0, but when I do none of the ports are forwarded. This only works in Bridge. What am I missing? Quote Link to comment
JonathanM Posted January 9, 2022 Share Posted January 9, 2022 5 hours ago, DG1M said: I'm attempting to configure this using custom : br0, but when I do none of the ports are forwarded. This only works in Bridge. What am I missing? Containers not on bridge expose all their ports, no remapping needed or possible. Use the ports listed on the container side in the bridge configurations. Quote Link to comment
Jaska Posted January 14, 2022 Share Posted January 14, 2022 Any idea why SteamCMD keeps crash looping every steam game? this didn't happen before latest update. Redirecting stderr to '/home/amp/Steam/logs/stderr.txt' ILocalize::AddFile() failed to load file "public/steambootstrapper_english.txt". [ 0%] Checking for available update... [ 0%] Download Complete. [----] Verifying installation... [ 0%] Downloading Update... [ 0%] Checking for available update... [ 0%] Download Complete. [----] Extracting package... [----] Extracting package... 17:24:20 [----] Extracting package... 17:24:22 [----] Extracting package... [----] Installing update... [----] Cleaning up... [----] Failed to remove temporary unzip folder, continuing anyway [----] Update complete, launching... Quote Link to comment
unstatic Posted January 19, 2022 Share Posted January 19, 2022 On 1/14/2022 at 3:29 PM, Jaska said: Any idea why SteamCMD keeps crash looping every steam game? this didn't happen before latest update. Redirecting stderr to '/home/amp/Steam/logs/stderr.txt' ILocalize::AddFile() failed to load file "public/steambootstrapper_english.txt". [ 0%] Checking for available update... [ 0%] Download Complete. [----] Verifying installation... [ 0%] Downloading Update... [ 0%] Checking for available update... [ 0%] Download Complete. [----] Extracting package... [----] Extracting package... 17:24:20 [----] Extracting package... 17:24:22 [----] Extracting package... [----] Installing update... [----] Cleaning up... [----] Failed to remove temporary unzip folder, continuing anyway [----] Update complete, launching... i'm having the same problem... any idea what could it be? Quote Link to comment
JeremiahD30 Posted January 24, 2022 Share Posted January 24, 2022 Hey just setup a Rust server but now its saying "The process could not be started. If you have recently restored from a backup on Linux, please make sure that the RustDedicated executable is flagged as +x." ive tried flagging it with Win SCP and it doesn't take the change and i did not restore from a backup, this is a fresh install Quote Link to comment
survivalbloke Posted March 20, 2022 Share Posted March 20, 2022 Can't seem to reach my Minecraft Java server. I watched the youtube tutorial which was by the same gentleman who made a Valheim server video. I've tried so many settings options and it all seems as though it would work, but my Minecraft client just doesn't see the server. The IP of my unRAID server is 192.168.1.10. Supposing the AMP Minecraft server default settings, shouldn't I be able to reach my server at 192.168.1.10:25565? Any thoughts? Quote Link to comment
Sporical Posted March 22, 2022 Share Posted March 22, 2022 I am trying to start an Arma 3 server with the AMP docker, however everytime I try to click update/start it gives me an error and just keeps updating infinitely. Anyone know a fix to this? Quote Link to comment
survivalbloke Posted March 25, 2022 Share Posted March 25, 2022 On 3/21/2022 at 10:49 PM, Sporical said: I am trying to start an Arma 3 server with the AMP docker, however everytime I try to click update/start it gives me an error and just keeps updating infinitely. Anyone know a fix to this? Doesn't seem to be a lot of support here. Did you by chance find your answer somewhere, and if so, where? Quote Link to comment
Norcunas Posted March 29, 2022 Share Posted March 29, 2022 Hi, I thought it would be a nice touch for the Users of my AMP Server to connect via SFTP over a webpage. I have a nextcould instance with it "external devices" installed. I can connect to SFTP test servers, ... via nextcloud, no problem. But I cannot connect from Nextcloud to AMP. I can however connect from FileZilla on a Desktop, ... Is there any known Problem on Nextcloud, ... to AMP communication that FileZilla is just solving for itself? I thank you all for your ideas Quote Link to comment
CoryShepherd Posted March 29, 2022 Share Posted March 29, 2022 Hello, Having issues with a Satisfactory Server on AMP. Can anyone tell me how i get access to Savefiles? I have looked high and low with no luck. Thankyou In Advance. Quote Link to comment
Sporical Posted March 29, 2022 Share Posted March 29, 2022 On 3/25/2022 at 8:36 AM, survivalbloke said: Doesn't seem to be a lot of support here. Did you by chance find your answer somewhere, and if so, where? No I have not gotten any support on this issue yet. Still a problem Quote Link to comment
Nanobug Posted March 31, 2022 Share Posted March 31, 2022 On 3/29/2022 at 10:29 PM, CoryShepherd said: Hello, Having issues with a Satisfactory Server on AMP. Can anyone tell me how i get access to Savefiles? I have looked high and low with no luck. Thankyou In Advance. Yes. The save files for Satisfactory is in the Steam Cloud. So it's not actually saved on the server. There is an exception for that though. If you run the server (not AMP) in a docker, it should put the save files there somewhere. I haven't tested it though, so I just started running it locally instead. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.