Stable Releases
Bug reports for stable releases.
2506 reports in this category
-
In early October I upgraded to 6.11.3 and have nothing but issues since. Once 6.11.3 was installed, the server would either hang while booting or freeze 3-5 minutes after I could log in. I attempted to roll back to 6.10.3 using a backup of my USB stick but the machine would not see that as bootable. I then created a new 6.10.3 from scratch and copied over the directories from my backup zip file. I was able to get back into 6.10.3, but I now get numerous out of memory errors and have to eithe
- Annoyance
- 1005 views
-
Hello, i am building an unraid server. I bought these components: CPU ryzen 7 5700x Asrock ASRock X570S PG Riptide (2x M2 Slot PCIE 4x4) 2x Lexar Professional NM800 M.2 1TB Nvidia gtx 960 to my problem: Unfortunately, both NVME hard drives are not recognized at the same time. individually it works wonderfully, whether in slot 1 or 2. I've read a lot in forums about the second M2 port and I think it's because of the hard drive ID. what
- Minor
- 1180 views
-
Hi, I am using v6.11.5 and after a new Nvidia driver was available, I rebooted my server. After the reboot, I started the array via GUI and everything is normal - the array is available, also via network, VMs and Dockers started. One thing is very weird though - in the GUI the array still shows as "off-line", also in the Main view. Any idea what is causing this issue or a workaround? Thanks for your support!
- Annoyance
- 941 views
-
Not sure if this is a bug or issue with USB device. Upgraded from 6.11.1. But every time I shutdown and restart server, it is not booting up. Once I got bzrootgui checksum error next time I got bzfirmware checksum error next I got pstore error on each of the occasion I had to format the device and copy the server from backup and reboot. Pleas help and advise.
- Urgent
- 569 views
-
there needs a way to update apps by adding a easy feature to allow Unraid to route all traffic through a proxy because many plugins are blocked in china. If this is not solved. Unraid turns useless here.
- Urgent
- 445 views
-
After running unraid for more then two hours, this happened... Tried to reboot, but i am not able to start the array after reboot... GUI is not working anymore...
- Minor
- 3845 views
-
Unraid 6.11.5. Alright, this one I struggled with for a couple weeks, I guess. Tried all kinds of different configurations but seems like the problem was just with iptables. Story so far: I'm using custom Docker bridge with disabled icc and masquerading, since all of this will be taken care of by my router (OPNsense in VM). In order for Docker containers to access internet, I have to use the router as a gateway, which is set as a default one in the Unraid host (thanks, li
- Urgent
- 1553 views
-
After server reboot, the array does not autostart! It is set to auto-start in settings/disk settings. Array has no issue, pressing to start it, starts it fine (no parity re-check or anything). This is very important because someone has to login the server either from its own console or using IP (and not FQDN as DNS etc. are in containers and VMs) to just press "start array"! Array worked fine (and auto-started) for years.
- Closed
- 2120 views
-
Upgraded to 6.11.4 from 6.11.3. Two crashes were observed soon after: 1) Right after upgrading, I tried to launch my WIN10VM while the dockers were loading. The system froze and my win10vm was unresponsive at login screen. All my dockers were down and my unraid GUI was unreachable. Nov 19 17:01:17 unraid kernel: BUG: Bad page state in process qemu-system-x86 pfn:7559e9 Nov 19 17:01:17 unraid kernel: page:00000000c01ab2ff refcount:0 mapcount:0 mapping:0000000000000000
- Solved
- 2494 views
-
Error during upgrade procedure on 2nd pass downloading file Error reads plugin: updating: unRAIDServer.plg plugin: downloading: unRAIDServer-6.11.5-x86_64.zip ... 90% plugin: unRAIDServer-6.11.5-x86_64.zip download failure: File I/O error Executing hook script: post_plugin_checks tower1-diagnostics-20221128-0634.zip
- Closed
- 1405 views
-
I bought the Synology E10G15-F1 which needs the TN4010 driver and now I read in the New Features that the driver is not part of Unraid 6.9 anymore: I did not install the card by now, but I really like to, as it seems to be the most power efficient card for 10G connections.
- Minor
- 1722 views
-
I didn't even notice this was added, but I do use a SPICE VM which is UEFI Secure Boot with BitLocker authentication on startup. I went to start the VM and noticed the Start With Console (SPICE) option and was shocked to see both the start with console option, and the spice support! Cool stuff! That said, the URL the SPICE WebClient is trying to use for the websocket connection is invalid: It's adding a `:` between the host address and the path, presumably because the client is expe
- Minor
- 2300 views
-
From the release notes: This is not just applying to new installations. I upgraded my secondary server and my docker custom network type was changed from macvlan to ipvlan.
- Solved
- Minor
- 2159 views
-
OK, never mind. It was custom go config. Sorry about that.
- Closed
- 636 views
-
I had noticed this on some other users diagnostics recently, and I just tried it on my Unraid. No idea how long this hasn't been working since I didn't check on my own system on 6.11RCs or maybe even with 6.10 The shares folder in diagnostics has the .cfg files from config/shares on flash, but for some (or all) shares will say "Share exists on no drives", when the share really does have files. And shareDisks.txt will be empty or only list those few shares that diagnostics incorrectly
- Minor
- 2600 views
-
Hi everyone, since i upgraded to 6.11.1 i had a few partial lockups, when it happens i can ssh into the server but GUI and all dockers/vm are unreachable. looking at the syslog i think i have found something but i'm not sure what that means: Nov 23 03:08:38 Home-Server CA Backup/Restore: ####################### Nov 23 03:08:38 Home-Server CA Backup/Restore: appData Backup complete Nov 23 03:08:38 Home-Server CA Backup/Restore: ####################### Nov 23 03:08:38 Home-Serv
- Annoyance
- 494 views
-
Upgraded to 6.11.5 and lost almost all my shares and docker service wouldn't start as well. Downgraded back to 6.11.4 and everything returned to normal. tower-diagnostics-20221121-0803.zip
- Minor
- 833 views
-
The macvlan docker networks created through the GUI do not use the DHCP pool when set. After setting any range, containers will still assign ip addresses starting with the lowest number even if that is outside of the DHCP pool range.
- Minor
- 1148 views
-
Upgraded from 6.9.2 to 6.11.4 and the system no longer boots. I get to the boot selection menu and, regardless of what I select, the system just hangs at this screen. This also happened back with 6.10. I decided not to upgrade at that time as there was talk of a change in how drivers were being handled. I wanted to wait and see if that would address my issues. There is no further info on the console nor is there anything in the logs that I can see. I rolled back to 6.9.2 and have not
- Solved
- Minor
- 699 views
-
1) insert any nvme disk with partitions 2) use unraid UNASSIGNED DEVICES to delete those partitions. 3) format disk with new partition no matter what xfs,btrfs, ntfs no difference. 4) try to mount newly formated disk (you will be unable to finish this). 5) look at logs and you will se this : Nov 14 07:26:38 Skynet unassigned.devices: Adding partition 'nvme1n1p1'... Nov 14 07:26:38 Skynet unassigned.devices: Mounting partition 'nvme1n1p1' at mountpoint
- Closed
- 812 views
-
Found the problem. Read the first comment of this bug report. TL;DR Multiple users reported spikes in their power consumption after updating to Unraid 6.10 and this is still present in Unraid 6.11: https://forums.unraid.net/topic/105909-mein-10-zoll-server/?do=findComment&comment=1143526 https://forums.unraid.net/topic/108966-strom-sparen-mit-powertop-stromverbrauch-von-unraid-verbessern/?do=findComment&comment=1177306 http
- Solved
- Minor
- 4973 views
-
Hello just reporting that after upgrading from 6.11.1 to 6.11.3 one of my 3 cache single disk arrays becomes Read-only. I noticed as this is where I host my docker containers, after a while they start crashing/malfunctioning due to no availability to write info. Restarted, restarted docker services, mount/unmount nothing fixed except rolling back. Fix common errors plugin reports as docker.img being full (not the case) and above it cache drive reports as read only. Attac
- Closed
- 1174 views
-
suddenly the array went offline , all my drives as healthy and present , but the end part of all the disk identifications has changed in unraid , hence cannot start the array, pls help
- Closed
- 628 views
-
Hi, I updated my sever to 6.11.0 from 6.10.3 and everything went well. I am able to access the GUI through a remote computer without any issues. However, the GUI does not load on the monitor connected directly on the server. The monitor stays on (does not go to standby) but blank. Is this a bug? Please help.
- Solved
- Urgent
- 2890 views
-
This issue has been preventing me from upgrading from 6.10. Every 6.11 release has this issue for me. I even rebooted unraid into safe mode and didn't start the array, and the periodic spike was still there. It's in a kworker thread: I've attached safe mode diagnostics. I'd appreciate any insights. tower-diagnostics-20221118-1318.zip
- Minor
- 696 views
.thumb.jpg.2e7ca1cf586ea7b26b33d727192bdc1b.jpg)
