SavellM Posted February 1, 2013 Share Posted February 1, 2013 My network is set to DHCP. I can set it up manually if this is better? Altho I have just installed all packages manually now Great work by the way, looks awesome. On another note, you might want to look into the forum post here: http://lime-technology.com/forum/index.php?topic=25659.0 Link to comment
Frank1940 Posted February 1, 2013 Share Posted February 1, 2013 I love this plugin, fantastic work! But is there any way to set it up to e-mail you if there is an issue rather than it constantly e-mailing me every hour, as I have it set up to mail my phone, but I only want to know if there is a fault. I've probably overlooked something, but can't seem to set it up how I want it. Cheers Under 'E-mail Notifications' on the 'Settings' page', change, 'Email Frequency' to 1440. That will cause it to only send an E-mail once a day. Thanks for that, Does that mean if I set it at 1440 now, I'll receive and e-mail every day at that time I set it? or is there a default time of day it sends it. Since no one else replied back, I will give you my assumption. It will be after 1440 minutes after you click on 'Apply'. Now, if you really want to know, enter '30' in the box and note the time when you click on 'Apply'. Watch the times on the E-mail messages and you can report back here with your findings. Link to comment
drawz Posted February 2, 2013 Share Posted February 2, 2013 @ Speeding_ant Can you please add cpu temp to the Unraid Stats in the next release? Thanks! +1!!! Link to comment
greenythebeast Posted February 2, 2013 Share Posted February 2, 2013 Does 1.0.5 work alright with RC11? Link to comment
petebnas Posted February 2, 2013 Share Posted February 2, 2013 I just got it working (fresh install of simplefeatures on a .11 upgrade)...however, creating the plugins folder and dumping the files in there didn't do the install. I had to telnet to the box and enter this: installplg /boot/config/plugins/simpleFeatures.core.webGUI-1.0.5-noarch-1.plg Then reboot..that got it up and running for me. Link to comment
itimpi Posted February 2, 2013 Share Posted February 2, 2013 Does 1.0.5 work alright with RC11? The only thing I have found not to work is the ability to drill down on a share to get a list of files. I am assuming that the new folder/file 'locations' feature introduced in rc11 broke this and that SF will need an upgrade to handle this. Link to comment
jowi Posted February 2, 2013 Share Posted February 2, 2013 Does 1.0.5 work alright with RC11? The only thing I have found not to work is the ability to drill down on a share to get a list of files. I am assuming that the new folder/file 'locations' feature introduced in rc11 broke this and that SF will need an upgrade to handle this. Does work here just nicely using 1.05 and rc11. Link to comment
SavellM Posted February 3, 2013 Share Posted February 3, 2013 I just got it working (fresh install of simplefeatures on a .11 upgrade)...however, creating the plugins folder and dumping the files in there didn't do the install. I had to telnet to the box and enter this: installplg /boot/config/plugins/simpleFeatures.core.webGUI-1.0.5-noarch-1.plg Then reboot..that got it up and running for me. I've had this exact same issue. Link to comment
SgtSiff Posted February 3, 2013 Share Posted February 3, 2013 I'm building an unraid server for my friend and put him the latest RC on. I also had problems installing the plugins. I had to telnet to the server and install each module individually, which isn't a problem but wouldn't be immediately obvious to some one who is new to unraid. For you copy and pasting pleasure (make sure you start with the top one): installplg /boot/config/plugins/simpleFeatures.core.webGUI-1.0.5-noarch-1.plg installplg /boot/config/plugins/simpleFeatures.active.streams-1.0.5-noarch-1.plg installplg /boot/config/plugins/simpleFeatures.activity.monitor-1.0.5-noarch-1.plg installplg /boot/config/plugins/simpleFeatures.cache.dirs-1.0.5-noarch-1.plg installplg /boot/config/plugins/simpleFeatures.disk.health-1.0.5-noarch-1.plg installplg /boot/config/plugins/simpleFeatures.dns.server-1.0.5-noarch-1.plg installplg /boot/config/plugins/simpleFeatures.email.notify-1.0.5-noarch-1.plg installplg /boot/config/plugins/simpleFeatures.log.viewer-1.0.5-noarch-1.plg installplg /boot/config/plugins/simpleFeatures.s3.sleep-1.0.5-noarch-1.plg installplg /boot/config/plugins/simpleFeatures.system.info-1.0.5-noarch-1.plg installplg /boot/config/plugins/simpleFeatures.system.stats-1.0.5-noarch-1.plg installplg /boot/config/plugins/simpleFeatures.web.server-1.0.5-noarch-1.plg Also, with the latest RC, I had issues adding a new disk to the array but that is for another thread. I've downgraded my buddy to rc8a which seems to be relatively stable for me. Link to comment
Juzzotec Posted February 3, 2013 Share Posted February 3, 2013 I just got it working (fresh install of simplefeatures on a .11 upgrade)...however, creating the plugins folder and dumping the files in there didn't do the install. I had to telnet to the box and enter this: installplg /boot/config/plugins/simpleFeatures.core.webGUI-1.0.5-noarch-1.plg Then reboot..that got it up and running for me. I've had this exact same issue. Me too man, had to run the installpkg on each one, 11 out of 11 Link to comment
jowi Posted February 9, 2013 Share Posted February 9, 2013 When i try to use the email plugin, the interface show that it has succesfully sent an email, but the syslog says: <root@> domain missing or malformed I am using the right smtp and user/pwd account etc. Am i missing something? Link to comment
bonienl Posted February 10, 2013 Share Posted February 10, 2013 The message in the GUI means that the SMTP program was able to connect to the server and did a mail exchange. It doesn't mean the mail did successfully arrive, hence the notice to look in the syslog to be conclusive. In your case the entry "Account email address" needs to be in the format "[email protected]". Link to comment
jowi Posted February 10, 2013 Share Posted February 10, 2013 In your case the entry "Account email address" needs to be in the format "[email protected]". It is... checked it for typo's but its all ok. Do i need some additional package to get this working? Link to comment
jowi Posted February 10, 2013 Share Posted February 10, 2013 I've removed my providers smtp server and using a gmail account, now an email message is sent to the gmail account, which is weird, why is this working and not the other account? Still, i'm using my normal email as a recipient, but it looks like simplefeatures only sends the mail to the mailbox account (gmail in this case) and NOT to the additional recipients? Also, as 'sending adress' i HAVE to use the gmail account email adress, where basically i want something like '[email protected]'. Link to comment
jowi Posted February 10, 2013 Share Posted February 10, 2013 f*ck ^%$^%$ this happened before, while changing settings in the email plugin, the whole system gets unresponsive, web interface hangs... %$#$%#$% have to powerdown and reboot. I guess i just remove this plugin and try again when a new version arrives that does work. *edit* even clean powerdown could not powerdown... had to to a hard reset *yikes*... this is the 2nd time this happens when trying to get this plugin to work. I would seriously advise NOT using this plugin, its an accident waiting to happen... Link to comment
darkside40 Posted February 11, 2013 Share Posted February 11, 2013 Have a minor issue with Simplefeatures. I did an update from 1.0RC2 to 1.05, because i updated unraid to the last RC. My problem now is that Simplefeatures shows the S3 Sleep Script as running (and it runs and works) on the settings page, but on the same page the settings are saying that the S3 Sleep Script is disabled. Any thoughts about that? Link to comment
xamindar Posted February 11, 2013 Share Posted February 11, 2013 f*ck ^%$^%$ this happened before, while changing settings in the email plugin, the whole system gets unresponsive, web interface hangs... %$#$%#$% have to powerdown and reboot. I guess i just remove this plugin and try again when a new version arrives that does work. *edit* even clean powerdown could not powerdown... had to to a hard reset *yikes*... this is the 2nd time this happens when trying to get this plugin to work. I would seriously advise NOT using this plugin, its an accident waiting to happen... Yeah this plugin is not very good. I have a cron job that runs every 3 minutes and this thing was sending me a useless email every 3 minutes. Sent from my A510 using Tapatalk HD Link to comment
JustinChase Posted February 11, 2013 Share Posted February 11, 2013 I just updated to 5rc11a and am of the impression that I need to run the newperms script if coming from rc8a, since the rc10 and newer use a new security model. I went to the utilities section of Simple Features, and click on the new permissions link and it opens a new firefox window with the following text... /usr/local/sbin/newperms enable nobody 8082 /usr/local/sabnzbd /mnt/cache/plugins/sabnzbd yes yes yes master completed, elapsed time: 00:00:00 I'm not sure why it only seems to want to run it on that folder, other than the fact that I manually ran it on that folder as part of my upgrade, trying to allow me to copy files from that folder to an array disk, so that I could remove my cache drive. I'm guessing it's keeping some information from the last time it ran the newperms command, but can't imagine why it would do that. so, can anyone give me the actual command I should run from a PuTTy window, to get the whole array 'fixed'? I suppose I could just run it on each user share, since there are only 6, but figured I'd ask first. Thanks Link to comment
trurl Posted February 12, 2013 Share Posted February 12, 2013 ... I'm guessing it's keeping some information from the last time it ran the newperms command, but can't imagine why it would do that. so, can anyone give me the actual command I should run from a PuTTy window, to get the whole array 'fixed'? I suppose I could just run it on each user share, since there are only 6, but figured I'd ask first. Thanks I think what it normally does is run on each disk instead of each share. Hadn't heard of it running like you mentioned Link to comment
JustinChase Posted February 12, 2013 Share Posted February 12, 2013 Yeah, I agree that that's what it's supposed to do, but that's not what's happening. I was just guessing at why it seemed to do what it did. Hopefully someone knows the actual newperms script so I can just run it manually. Link to comment
trurl Posted February 12, 2013 Share Posted February 12, 2013 Yeah, I agree that that's what it's supposed to do, but that's not what's happening. I was just guessing at why it seemed to do what it did. Hopefully someone knows the actual newperms script so I can just run it manually. It is just "newperms" followed by a path to the files. I recently ran it on a download folder of mine like so: newperms /mnt/user/Bin/NZBs/Downloads/complete/* Link to comment
RobJ Posted February 12, 2013 Share Posted February 12, 2013 Yeah, I agree that that's what it's supposed to do, but that's not what's happening. I was just guessing at why it seemed to do what it did. Hopefully someone knows the actual newperms script so I can just run it manually. You are running RC11a which is a special test version. Try with RC11. You might also want to clear your browser cache, and try again. Link to comment
ez2002 Posted February 12, 2013 Share Posted February 12, 2013 is there a way to pull the historical data out for storage? Especially the ones for processor, memory and network Link to comment
tw332 Posted February 12, 2013 Share Posted February 12, 2013 I'm currently running without a parity drive but noticed that when the server wakes from sleep the array is automatically started. This doesn't happen on a fresh boot. I presume the sleep/wake up script is starting the array but can't find any reference to it in settings/logs. Link to comment
Helmonder Posted February 14, 2013 Share Posted February 14, 2013 Is there an ETA on the new simplefeatures version ? I have the impression that some stuff does not completly work with the latest V5 release, I have had a few freezes of the webinterface while emhttp was still running (no OOM stuff). Also a nice idea: Would it be possible to give an overall piechart showing distribution of storage per share over the whole array ? I am thinking of a piechart showing something like: 50% Movies, 40% Series, 10% User ? Or as another option: 30% movies, 20% series, 5% user and 45% free Link to comment
Recommended Posts