takkkkkkk Posted November 19, 2020 Share Posted November 19, 2020 (edited) 8 hours ago, Skatman said: Hey, I've got an issue with SABnzbd on my UnRAID platform. I've been using it for about 2 years now on a Windows 10 box and then connecting via an SMB share to transfer the files across. Thinking of just using my UnRAID platform to run it all, so installed it and it loads fine. Issue I have is trying to find the folders I want for downloading. I have created /mnt/user/Downloads/Downloading and /mnt/user/Downloads/Completed and are set to public share access with SMB. I try typing the full directory path into the Sab config and it says "Cannot create directory". Not only this, but I can't find it if I click on the "Browse" button. If I click that, I can navigate to the root drive, but when I click on /mnt/ I end up with nothing. The Volume Mappings in the Docker itself are pointed to the right place. Any ideas? Have you tried mapping the networkdrive (assignes drives letter)? I'm assuming you're trying to access the smb from windows right? Edited November 19, 2020 by takkkkkkk Quote Link to comment
Skatman Posted November 19, 2020 Share Posted November 19, 2020 5 hours ago, takkkkkkk said: Have you tried mapping the networkdrive (assignes drives letter)? I'm assuming you're trying to access the smb from windows right? Hey, no, it was all local. Share is stored locally on UnRAID, SAB is in a Docker locally. Ironically, my virtual Windows box with my old instances of SAB, Sonarr, and Radarr could connect in just fine. Anyway, I watched the Spaceinvader1 video again and it worked OK. Must have been entering the info in wrong somewhere. Quote Link to comment
Mungaloid Posted February 28, 2021 Share Posted February 28, 2021 Hey all. I am having issues with sab, and multiple containers, that I cannot find the solution for. Whenever I update any container, the configuration is reset to default and I need to re-enter the configuration in for that specific container. In sab's case, it acts like it would for the first time it was downloaded every time I update the container. Any thoughts? Attached is my current settings for sabnzbd. Thank you all in advance! Quote Link to comment
gzibell Posted March 1, 2021 Share Posted March 1, 2021 (edited) Edit - Looks to be something with using the proxy in Sonarr/Radarr. It was checked to bypass proxy for local addresses but if I set everything back to bridge and disabled the proxy everything worked normally. Enable the proxy lose connection to sab. Added server ip to ignored addresses in sonarr/radarr all back up and running Anyone having issues with Sab/Radarr/Sonarr today? Updated all dockers this AM and now Sonarr and Radarr are both unable to communicate with Sab. Has been working fine for years and know it was working yesterday so assuming it was something in the update this am. I can navigate webui's of all three like normal. Now I noticed on Status and interface options page it lists the ip as 172.17.0.8 which is not in my network range. If I throw that into Radarr/Sonarr they work but that isn't right since Sab lives at 192.168.1.100. If I flip network type to host the status and interface options shows the 1.100 as it should but then radarr/sonarr can't communicate. If I then flip sonarr to host as well instead of bridge those 2 communicate but same things is not working for Radarr I wonder what changed or why host works vs bridge. Edited March 1, 2021 by gzibell Added solution Quote Link to comment
Jurak Posted March 12, 2021 Share Posted March 12, 2021 (edited) Essential modules are missing, downloading cannot start. and unrar binary... NOT found! I am getting this when trying to download. I have stopped and restarted sabnzbd and uninstalled and reinstalled the docker. Let me know if there is anything I can provide to help figure this out. Edit adding log entries. 2021-03-12 07:15:46,371::INFO::[SABnzbd:425] par2 binary... found (/usr/bin/par2) 2021-03-12 07:15:46,371::INFO::[notifier:122] Sending notification: Error - unrar binary... NOT found! (type=error, job_cat=None) 2021-03-12 07:15:46,371::ERROR::[SABnzbd:444] unrar binary... NOT found! 2021-03-12 07:15:46,371::INFO::[SABnzbd:450] 7za binary... found (/usr/bin/7za) 2021-03-12 07:15:46,371::INFO::[SABnzbd:461] nice binary... found (/usr/bin/nice) 2021-03-12 07:15:46,371::INFO::[SABnzbd:465] ionice binary... found (/usr/bin/ionice) 2021-03-12 07:15:46,371::INFO::[notifier:122] Sending notification: Error - Essential modules are missing, downloading cannot start. (type=error, job_cat=None) 2021-03-12 07:15:46,371::ERROR::[SABnzbd:471] Essential modules are missing, downloading cannot start. Edited March 12, 2021 by Jurak 1 Quote Link to comment
sjoerger Posted March 12, 2021 Share Posted March 12, 2021 2 minutes ago, Jurak said: Essential modules are missing, downloading cannot start. and unrar binary... NOT found! I am getting this when trying to download. I have stopped and restarted sabnzbd and uninstalled and reinstalled the docker. Let me know if there is anything I can provide to help figure this out. I was about to post the same thing. I saw there was image update this morning and I get the same error as well as the following: 2021-03-12 09:20:19,429::INFO::[SABnzbd:425] par2 binary... found (/usr/bin/par2) 2021-03-12 09:20:19,430::INFO::[notifier:122] Sending notification: Error - unrar binary... NOT found! (type=error, job_cat=None) 2021-03-12 09:20:19,429::ERROR::[SABnzbd:444] unrar binary... NOT found! 2021-03-12 09:20:19,430::INFO::[SABnzbd:450] 7za binary... found (/usr/bin/7za) 2 Quote Link to comment
ephdisk Posted March 12, 2021 Share Posted March 12, 2021 16 minutes ago, sjoerger said: I was about to post the same thing. I saw there was image update this morning and I get the same error as well as the following: 2021-03-12 09:20:19,429::INFO::[SABnzbd:425] par2 binary... found (/usr/bin/par2) 2021-03-12 09:20:19,430::INFO::[notifier:122] Sending notification: Error - unrar binary... NOT found! (type=error, job_cat=None) 2021-03-12 09:20:19,429::ERROR::[SABnzbd:444] unrar binary... NOT found! 2021-03-12 09:20:19,430::INFO::[SABnzbd:450] 7za binary... found (/usr/bin/7za) Include me in getting this error too. I am still on 6.8.3 Quote Link to comment
pescew Posted March 12, 2021 Share Posted March 12, 2021 2021-03-12 08:06:28,097::INFO::[notifier:122] Sending notification: Error - unrar binary... NOT found! (type=error, job_cat=None) 2021-03-12 08:06:28,097::ERROR::[SABnzbd:444] unrar binary... NOT found! 2021-03-12 08:06:28,097::INFO::[SABnzbd:450] 7za binary... found (/usr/bin/7za) 2021-03-12 08:06:28,098::INFO::[SABnzbd:461] nice binary... found (/usr/bin/nice) 2021-03-12 08:06:28,098::INFO::[SABnzbd:465] ionice binary... found (/usr/bin/ionice) 2021-03-12 08:06:28,098::INFO::[notifier:122] Sending notification: Error - Essential modules are missing, downloading cannot start. (type=error, job_cat=None) 2021-03-12 08:06:28,098::ERROR::[SABnzbd:471] Essential modules are missing, downloading cannot start. Quote Link to comment
Niklas Posted March 12, 2021 Share Posted March 12, 2021 It's fixed now. Update the container. 1 2 Quote Link to comment
sjoerger Posted March 12, 2021 Share Posted March 12, 2021 17 minutes ago, Niklas said: It's fixed now. Update the container. Confirming my container now has unrar support after pulling latest container update. Thanks for the quick fix. 2021-03-12 10:40:15,126::INFO::[SABnzbd:425] par2 binary... found (/usr/bin/par2) 2021-03-12 10:40:15,126::INFO::[SABnzbd:432] UNRAR binary... found (/usr/bin/unrar) 2021-03-12 10:40:15,127::INFO::[SABnzbd:442] UNRAR binary version 6.00 Quote Link to comment
Xarishark Posted April 14, 2021 Share Posted April 14, 2021 Hi Today when i connected to my Sab instance I saw about 5 errors saying that the nzb of some movies( all of them in row) where empty nzbs. Im pasting the Log file. If its my Radarr instance at fault I will post on the Support page of this container. sabnzbd (4).log Quote Link to comment
cyriouslydylan Posted May 4, 2021 Share Posted May 4, 2021 Hey all, I just today updated to the latest version, and suddenly when running, my CPU gets pegged at 100%, with like 80-90% iowait. it only is when running this docker, not affected by any others, or moving files. Quote Link to comment
Forty Two Posted June 21, 2021 Share Posted June 21, 2021 Hi, I've been getting periodic 403 errors with this container. Rebooting seems to help for a couple of weeks. Any ideas? Quote Link to comment
Endda Posted July 27, 2021 Share Posted July 27, 2021 delete button doesn't do anything with the latest update Quote Link to comment
Teknoclown Posted September 7, 2021 Share Posted September 7, 2021 Im getting a weird error when I try and access my webUI. 400 Bad Request Illegal key 'ys-api/channel' Traceback (most recent call last): File "/usr/local/lib/python3.8/dist-packages/cherrypy/_cprequest.py", line 734, in process_headers self.cookie.load(value) File "/usr/lib/python3.8/http/cookies.py", line 529, in load self.__parse_string(rawdata) File "/usr/lib/python3.8/http/cookies.py", line 593, in __parse_string self.__set(key, rval, cval) File "/usr/lib/python3.8/http/cookies.py", line 485, in __set M.set(key, real_value, coded_value) File "/usr/lib/python3.8/http/cookies.py", line 352, in set raise CookieError('Illegal key %r' % (key,)) http.cookies.CookieError: Illegal key 'ys-api/channel' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/local/lib/python3.8/dist-packages/cherrypy/_cprequest.py", line 638, in respond self._do_respond(path_info) File "/usr/local/lib/python3.8/dist-packages/cherrypy/_cprequest.py", line 666, in _do_respond self.process_headers() File "/usr/local/lib/python3.8/dist-packages/cherrypy/_cprequest.py", line 736, in process_headers raise cherrypy.HTTPError(400, str(exc)) cherrypy._cperror.HTTPError: (400, "Illegal key 'ys-api/channel'") Any Ideas? I have checked and both SabNZB and NerdPack are up to date, so no idea. Quote Link to comment
MendipMan Posted October 7, 2021 Share Posted October 7, 2021 Hi, Having a weird issue with a new sab install. it works fine but I cannot get it to point to the downloads folder I created in my user shares. Its configured correctly in the docker settings and even created the complete and incomplete directories in the /mnt/user/download folder for me but when I download something it saves them in the config/download folder not /mnt/user/download. Im trying to access the folder from a windows box and all the other ones work correctly which makes me think Ive not set something up incorrectly for sab. Only way I can access the files is by sharing the appdata folder and pulling the files from there. Permissions for the download folder are set to 777 and the PUID is 99 and PGID 100. The watch folder I created in my user share also works fine and sab picks the nzb's up. Any ideas? Quote Link to comment
trurl Posted October 7, 2021 Share Posted October 7, 2021 16 minutes ago, MendipMan said: makes me think Ive not set something up incorrectly for sab Makes me think so too Quote Link to comment
MendipMan Posted October 7, 2021 Share Posted October 7, 2021 Lol I mangled that sentence didnt I! Heres the backend config. Quote Link to comment
JonathanM Posted October 7, 2021 Share Posted October 7, 2021 32 minutes ago, MendipMan said: Heres the backend config. Post the docker run command and a screenshot of the paths settings page in sab. Quote Link to comment
MendipMan Posted October 7, 2021 Share Posted October 7, 2021 Sussed it. I didnt add the leading / to the download paths. Working fine now. Thanks for the help guys!! Quote Link to comment
gmythx Posted February 16, 2022 Share Posted February 16, 2022 On 9/7/2021 at 7:30 PM, Teknoclown said: Im getting a weird error when I try and access my webUI. 400 Bad Request Illegal key 'ys-api/channel' Traceback (most recent call last): File "/usr/local/lib/python3.8/dist-packages/cherrypy/_cprequest.py", line 734, in process_headers self.cookie.load(value) File "/usr/lib/python3.8/http/cookies.py", line 529, in load self.__parse_string(rawdata) File "/usr/lib/python3.8/http/cookies.py", line 593, in __parse_string self.__set(key, rval, cval) File "/usr/lib/python3.8/http/cookies.py", line 485, in __set M.set(key, real_value, coded_value) File "/usr/lib/python3.8/http/cookies.py", line 352, in set raise CookieError('Illegal key %r' % (key,)) http.cookies.CookieError: Illegal key 'ys-api/channel' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/local/lib/python3.8/dist-packages/cherrypy/_cprequest.py", line 638, in respond self._do_respond(path_info) File "/usr/local/lib/python3.8/dist-packages/cherrypy/_cprequest.py", line 666, in _do_respond self.process_headers() File "/usr/local/lib/python3.8/dist-packages/cherrypy/_cprequest.py", line 736, in process_headers raise cherrypy.HTTPError(400, str(exc)) cherrypy._cperror.HTTPError: (400, "Illegal key 'ys-api/channel'") Any Ideas? I have checked and both SabNZB and NerdPack are up to date, so no idea. Did you ever find a solution for this Teknoclown? I have the same problem now. Been running great for years. Quote Link to comment
IMTheNachoMan Posted February 25, 2022 Share Posted February 25, 2022 I have changed the port from 8080 to 8081 for my Sabnzbd container but unRAID still shows 8080. I am able to access it on 8081 as expected but for some reason it still shows 8080 on the unRAID screen. Anyone know what is wrong? Quote Link to comment
Squid Posted February 26, 2022 Share Posted February 26, 2022 As soon as you take the container off of "bridge" mode (which you have), it uses whatever ports that it wants to (ie: what you've specified in the application itself. What it looks like you're seeing is a GUI anomaly where because the port is still defined in the template it's still trying to display the mappings. You can always just delete the port from the template screen. Quote Link to comment
IMTheNachoMan Posted February 26, 2022 Share Posted February 26, 2022 1 hour ago, Squid said: As soon as you take the container off of "bridge" mode (which you have), it uses whatever ports that it wants to (ie: what you've specified in the application itself. What it looks like you're seeing is a GUI anomaly where because the port is still defined in the template it's still trying to display the mappings. You can always just delete the port from the template screen. I see. So for this container I am passing network to another container using --net:container=... So then if I want to change the application's ports I have to do it from within the SabNZBD app, right? Quote Link to comment
Squid Posted February 26, 2022 Share Posted February 26, 2022 Yes, because you're not using Bridge anymore Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.