September 12, 20232 yr Author 9 hours ago, yogy said: And today the issue is suddenly gone. Strange. Considering the amount of infrastructure, hardware and thousands of companies involved in getting a byte from GitHub to your server itself its amazing that the internet even works at all....
September 13, 20232 yr i noticed todat i am missing the button to do a extended test. is that feature removed or not working on the latest version of unraid?
September 13, 20232 yr Author 3 hours ago, thedutchguy said: i noticed todat i am missing the button to do a extended test. is that feature removed or not working on the latest version of unraid? Removed it a year or 2 ago.
September 14, 20232 yr Hoping somebody can help with this one (full disclosure maybe nothing to do with unraid/FCP) - Unraid 6.12.4 All working fine and no errors from FCP Changed from standard broadband modem running in PPPoE mode to full fibre modem running in DHCP mode. Firewall / router is hardware pfsense - changed pfsense from PPPoE connection to DHCP connection. Internet Wan and Lan all appear normal. Unraid server appears normal with apps able to update and install from apps tab etc. but FCP showing the following - "Unable to communicate with GitHub.com - Reset your modem / router or try again later, or set your to 8.8.8.8 and 8.8.4.4 Also make sure that you have a Gateway address set up (Your Routers IP address)." tried ping -c 3 github.com but that gets this response ping: github.com: Name or service not known Nothing has changed within pfsense and other computers on the LAN can still ping github.com Help appreciated *********************************************************************************************** EDIT: So this has resolved itself. Having looked no further but left everything alone for a couple of hours all is working again and a rescan with FCP now shows no errors. Edited September 14, 20232 yr by dgs2001 Update
September 14, 20232 yr On 8/19/2023 at 2:38 AM, HHUBS said: Yesterday, it was working then today it just stuck on this. Anyone having the same experience? Same here. This started a few days ago for me. It's not local cache as I get the same issue while in Incognito mode. I did upgrade from 6.12.3 to 6.12.4 three days ago, but I feel like this plugin worked after the upgrade. But I could be mistaken. And unlike @yogy, I'm still getting it. Nothing is appearing within my logs either. EDIT: Does not appear to be related to the 6.12.4 upgrade. I just upgraded my secondary unraid and it is still scanning, plus it's adding the line Fix Common Things to the log. Sep 14 10:55:44 unRAID root: Fix Common Problems Version 2023.07.29 EDITED EDIT: A reboot appears to have resolved the issue. Time will tell now. As mentioned before, I don't recall seeing the issue immediately after the upgrade and running this plugin is something I do right after an upgrade. But there could be a number of factors involved. I'm also trying to move VM's off my cache pool to reformat it and was getting errors with that. Or the move was showing a state of completion at over 120%. Edited September 14, 20232 yr by UncleStu
September 16, 20232 yr On 9/14/2023 at 12:02 AM, Squid said: Removed it a year or 2 ago. that would explain it. i have not used it in a while. is the feature to search/index for duplicate files also removed? Edited September 16, 20232 yr by thedutchguy
September 23, 20232 yr Im not sure if this is a bug or not, but I get the "error" "macvlan call traces found" even if I have ipvlan on my docker config
September 27, 20232 yr Is it intended for Fix Common Problems to address files orphaned on a cache from a move between shares (https://docs.unraid.net/unraid-os/manual/troubleshooting/#mover-is-not-moving-files)? "Check for files stored within a cache pool that isn't allowed within a share's settings" implies it is, but it does not seem to catch such problems on my sever even when I set the plugin to always spin up disks for checks.
October 2, 20232 yr I disabled the plugin and docker update notifictions in unraid because this great plugin "fix common problems" sends me this information on a weekly basis. I still get a warning that this is disabled. Shouldn't this plugin skip this warning if it is scheduled to send a notification on errors? I don't like the unraid notifications because it sends an email PER each and every update. This means I receive a dozen mails weekly which clutters my inbox. This plugin solves that with on plain and simple SINGLE notification. :).
October 2, 20232 yr Author It should skip it. But, you can also hit "Ignore" on that error and never be bothered again.
October 3, 20232 yr Feature idea: It would be cool if the "ignored" acknowledged errors & warnings were displayed in a condensed manner or collapsible list, instead of presenting the same as active warnings and errors do. It triggers me when the page loads thinking there might be stuff in there but it's just my list of already-reviewed things On 8/1/2023 at 6:21 AM, OverlordQ said: RM'd the /tmp/fix.common.problems/scanRunning file dated 4 days ago and then the pageload started working again. Thank you! Just the solution I came to look for. Edited October 3, 20232 yr by amapo Added feature idea at beginning of post.
October 8, 20232 yr says update is available when going to settings > fix common problems but when trying to update it is not updating to this new version and just says it's up to date 2023.09.30 is already installed
October 9, 20232 yr Similar to @HHUBS and @UncleStu, FCP has been working fine on both my servers. After this last update, when I go to the FCP page, the "Scanning" pop-up displays and just stays there. But, on my third server, after the newest update, it still works fine.
October 10, 20232 yr Author I can't replicate this. If you let it sit for a couple of minutes does it begin? If after a couple of minutes if you reload the page does it try to start up a new scan or does it have items already populated?
October 10, 20232 yr 13 minutes ago, Squid said: I can't replicate this. If you let it sit for a couple of minutes does it begin? If after a couple of minutes if you reload the page does it try to start up a new scan or does it have items already populated? I let it sit for 30 minutes or so on two different systems. If I refreshed the page and tried again it did the same thing. All that being said, it now works absolutely fine on both. Go figure!
October 11, 20232 yr Just started noticing MCE errors via the "Fix Common Problems" plugin. I am not very knowledgeable on this level of h/w issues. Anyway, here is the output of the mcelog. Any thoughts would be greatly appreciated. root@Unraid-1:/var/log# cat mcelog Kernel does not support page offline interface mcelog: Cannot read sysfs field /sys/kernel/security/lockdown: No such file or directory Kernel in lockdown. Cannot enable DIMM error location reportingmcelog: mcelog read: Function not implemented Hardware event. This is not a software error. MCE 0 CPU 3 BANK 5 TSC 77732a93f35d9 MISC 4634c486 ADDR 5de9d81880 TIME 1696952894 Tue Oct 10 10:48:14 2023 MCG status: MCi status: Corrected error MCi_MISC register valid MCi_ADDR register valid MCA: MEMORY CONTROLLER RD_CHANNEL2_ERR Transaction: Memory read error STATUS 8c00004000010092 MCGSTATUS 0 MCGCAP 1000c14 APICID 60 SOCKETID 3 MICROCODE 71a CPUID Vendor Intel Family 6 Model 45 Step 7 Hardware event. This is not a software error. MCE 1 CPU 3 BANK 10 TSC 77732a93f35d9 MISC 4900000400040000 TIME 1696952894 Tue Oct 10 10:48:14 2023 MCG status: MCi status: Corrected error MCi_MISC register valid MCA: MEMORY CONTROLLER RD_CHANNEL2_ERR Transaction: Memory read error MemCtrl: STATUS 8800004000800092 MCGSTATUS 0 MCGCAP 1000c14 APICID 60 SOCKETID 3 MICROCODE 71a CPUID Vendor Intel Family 6 Model 45 Step 7
October 14, 20232 yr Hi, is there a way to disable some checks. For example I use the "Docker Compose Plugin" and "Watchtower" to update my images. So I do not need the check if a docker needs an update. Now I have to ignore every container if an update have been found and thats pretty anoying.
October 14, 20232 yr Good afternoon, I recently just noticed this warning from FCP which is very unnerving for me. Can anyone shine some light on this ?. i am hoping its nothing more than a local device trying to connect. tower-diagnostics-20231014-1541.zip
October 17, 20232 yr On 10/15/2023 at 8:32 AM, wulperdinger said: Hello, I am having the same problem that FCP is stuck in scanning mode I am also experiencing this, but a reboot temporarily fixes the problem. I think I had some "files in use" or "mover" issues that caused it to hang?
October 31, 20232 yr Fix Common Problems does not start, when I go to the Apps tab, it hangs. It does not update anything on the page. Restart etc does not help. This has happened after (yet another) failure of a USB drive, and reinstating a backup.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.