ljm42 Posted April 8, 2018 Share Posted April 8, 2018 On 3/21/2018 at 3:51 PM, Squid said: Updated Update Assistant to properly handle "next" releases. There's now 2 buttons. One will check against the "Stable" version, and the other will check against the "Next" version of unRaid (You must already be on 6.4+ for the "Next" button to appear) Hi Squid, would you consider adding a third button labeled "Update OS" that takes you here? /Tools/Update That is the next logical step after running the tests. I've been running the update assistant on two systems for every beta release, and adding this direct link would save some clicks. Quote Link to comment
Squid Posted April 8, 2018 Author Share Posted April 8, 2018 5 minutes ago, ljm42 said: I've been running the update assistant on two systems for every beta release, and adding this direct link would save some clicks. After running it, doesn't the banner appear at the top from unRaid stating a new version is available, with a click to download link? Quote Link to comment
ljm42 Posted April 8, 2018 Share Posted April 8, 2018 Just now, Squid said: After running it, doesn't the banner appear at the top from unRaid stating a new version is available, with a click to download link? In fact, it did I actually didn't like that though, because it applied the update without a confirmation and without giving you the option to read the release notes. Maybe my issue is more with the banner than this plugin Quote Link to comment
richardsim7 Posted April 15, 2018 Share Posted April 15, 2018 I ran Extended Tests, and there were a bunch of files with whitespace etc, however, now I have a few blank looking ones. Any ideas on how to find them? The following files / folders contain whitespace at either the beginning or the end of the file names. This will cause issues with Windows / SMB because whitespace is disallowed at either the beginning or end of a file/folder ' ' ' ' Quote Link to comment
Squid Posted April 15, 2018 Author Share Posted April 15, 2018 8 hours ago, richardsim7 said: I ran Extended Tests, and there were a bunch of files with whitespace etc, however, now I have a few blank looking ones. Any ideas on how to find them? The following files / folders contain whitespace at either the beginning or the end of the file names. This will cause issues with Windows / SMB because whitespace is disallowed at either the beginning or end of a file/folder ' ' ' ' Try today's update and see if it doesn't let you see the files / folders ( You will probably have to re-run the extended test though) Quote Link to comment
JonathanM Posted April 15, 2018 Share Posted April 15, 2018 On 4/8/2018 at 9:19 AM, jonathanm said: I have an issue, and a suggestion for a fix. I have a box where the results from the extended test are huge, and clicking on the view results button brings up a blank view window and a hung browser, and then after several minutes it crashes firefox. To fix, I suggest adding 2 more things. 1. display size of log file in KB beside buttons 2. add button to download as text file instead of inline viewing @Squid, do you have any suggestions? I poked around to see if I could find a solution, but didn't see anything. Quote Link to comment
Squid Posted April 15, 2018 Author Share Posted April 15, 2018 Today's update should be a quick and dirty fix. See how that goes. If it doesn't work good for you, then I'll add the download Quote Link to comment
JonathanM Posted April 15, 2018 Share Posted April 15, 2018 2 hours ago, Squid said: Today's update should be a quick and dirty fix. See how that goes. If it doesn't work good for you, then I'll add the download That worked. Quote Link to comment
richardsim7 Posted April 16, 2018 Share Posted April 16, 2018 15 hours ago, Squid said: Try today's update and see if it doesn't let you see the files / folders ( You will probably have to re-run the extended test though) Cheers, they've shown up now Quote Link to comment
NAS Posted April 19, 2018 Share Posted April 19, 2018 Some quick feedback. I am new to this plugin. First off my compliments. It is super useful and very powerful Couple of enhancements for consideration: we suggest turning off mover logging which makes sense except that it also removes mover error logging.. we should not be hiding errors. not sure what the best fix would be here. when you enter the settings dialogue it actually kicks off a scan. I would suggest this is a break with the GUI design model and that entering settings should be limited to just that. Activating a scan should be a positive user action especially since it can take tens of minutes to complete. Kudos Quote Link to comment
Squid Posted April 19, 2018 Author Share Posted April 19, 2018 2 hours ago, NAS said: we suggest turning off mover logging which makes sense except that it also removes mover error logging.. we should not be hiding errors. not sure what the best fix would be here. LT recommendation is disabled mover logging 2 hours ago, NAS said: when you enter the settings dialogue it actually kicks off a scan. I would suggest this is a break with the GUI design model and that entering settings should be limited to just that. Only the first time. After that it only rescans on your schedule or when pressing rescan Quote Link to comment
NAS Posted April 19, 2018 Share Posted April 19, 2018 LT are wrong then But seriously I think all we need here is normal nix separation of error states. The reason I bring this up is that after manually tracking down where cache space had gone i noticed that i have had mover errors for weeks so this is based on real world issues. Also it is not my experience here that it only runs once but PECAK is entirely feasible. Will pay more attention and report back. Quote Link to comment
Squid Posted April 19, 2018 Author Share Posted April 19, 2018 3 minutes ago, NAS said: Also it is not my experience here that it only runs once but PECAK is entirely feasible Here's when it runs: On initial install when going to it's settings * After an update when going to it's settings * 10 minutes after an array start (background) On the schedule the user selects When pressing Rescan * If a scheduled run happens before going to FCP's settings, then a scan will not happen. 7 minutes ago, NAS said: i noticed that i have had mover errors for weeks so this is based on real world issues Put in a feature Req for errors to be logged. The test in FCP is classified as "Other" It will log the fact (if logging is enabled), but it will not trigger a notification from FCP. 1 Quote Link to comment
kerbys Posted April 24, 2018 Share Posted April 24, 2018 How do i remove a share from the "not to be touched" by docker safe perms Quote Link to comment
trurl Posted April 24, 2018 Share Posted April 24, 2018 1 hour ago, kerbys said: How do i remove a share from the "not to be touched" by docker safe perms Could you be a little more specific? Do you mean you want to remove a folder from the appdata share? Or what? Quote Link to comment
kerbys Posted April 24, 2018 Share Posted April 24, 2018 Sorry what i mean is in the docker safe new perms i had accidentally added my main media storage to not be touched. Now i cant remove that. ive tried ticking and unticking but it never removes itsself. Quote Link to comment
Mat1926 Posted May 8, 2018 Share Posted May 8, 2018 What kind of notifications does this plugin send ? I already configured unRaid to send email notifications. Also, just installing it is enough to receive notifications, or I have to set it up to do that? Quote Link to comment
Squid Posted May 8, 2018 Author Share Posted May 8, 2018 2 minutes ago, Mat1926 said: Also, just installing it is enough to receive notifications, or I have to set it up to do that There's a setting on under what circumstances to send notifications. Quote Link to comment
ken-ji Posted May 15, 2018 Share Posted May 15, 2018 tl;dr Can you use curl/wget to http://github.com to determine internet connectivity? Only found out now that the github CDN in my neck of the woods doesn't respond to pings... and FCP is complaining... root@MediaStore:~# ping github.com PING github.com (52.74.223.119) 56(84) bytes of data. ^C --- github.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1056ms root@MediaStore:~# curl -v github.com * Rebuilt URL to: github.com/ * Trying 52.74.223.119... * TCP_NODELAY set * Connected to github.com (52.74.223.119) port 80 (#0) > GET / HTTP/1.1 > Host: github.com > User-Agent: curl/7.59.0 > Accept: */* > < HTTP/1.1 301 Moved Permanently < Content-length: 0 < Location: https://github.com/ < * Connection #0 to host github.com left intact Quote Link to comment
Squid Posted June 13, 2018 Author Share Posted June 13, 2018 I need a tester to give me data needed to refine Troubleshooting mode Prerequisites You CANNOT be running unraid in GUI mode You must have a keyboard / monitor attached to the server If you qualify, then enter in the following commands at the local shell exec 1> >(tee -a /boot/console.log) 2> >(tee -a /boot/consoleerror.log) blah And then reboot your system. After rebooting, post the resulting file here. (And yes, I want you to type in "blah" - it gives me a baseline). I have to run GUI mode, so this is a PITA for me to do. Quote Link to comment
axipher Posted June 15, 2018 Share Posted June 15, 2018 The Unraid OS Warning still shows as below: "You are currently running 6.5.2 and the latest version is 6.5.3. It is recommended to upgrade here: and review the release notes HERE" and should instead link to Unraid 6.5.X separate update page now ( "/Tools/Update" ) Quote Link to comment
Squid Posted June 15, 2018 Author Share Posted June 15, 2018 I know. One of those stupid things I can never seem to find the time to change. Quote Link to comment
maciekish Posted July 9, 2018 Share Posted July 9, 2018 Hi how do i disable the continuous flash logging of syslog and diagnostics? I enabled it a couple days ago and cant find how to disable it any more. Quote Link to comment
Squid Posted July 9, 2018 Author Share Posted July 9, 2018 RebootSent via Tapatalk because I'm either at work or enjoying the summer Quote Link to comment
bremen1874 Posted July 15, 2018 Share Posted July 15, 2018 unRAID 6.5.1 The FCP extended test was giving me a long list of 'The following files exist within the same folder on more than one disk. This duplicated file means that only the version on the lowest numbered disk will be readable, and the others are only going to confuse unRaid and take up excess space:' errors. They all existed on cache and one of the other drives. I decided to remove the cache drive completely and followed a guide I found. Following the removal unRAID appears to be happy with everything working as normal. I re-ran the FCP extended test and most of the duplicate file errors have gone. What I can't understand is that there are still warnings related to PlexMediaServer and CrashPlanPro. It's still reporting that files exist on cache and I haven't got a cache drive connected. I've rebooted unRAID twice, once to plug the cache drive, and then again just-in-case. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.