Dimtar Posted November 3, 2018 Share Posted November 3, 2018 33 minutes ago, Squid said: Question: When you edit the template does it state for repository mace/qbittorent or linuxserver/qbittorent? Just went to test your problem, and a regression error in CA wound up under this circumstance that it would always pull mace instead of linuxserver. Pumping out an update to CA right now. The first time I installed the docker I selected the LSIO container but it did install the Mace one. Quote Link to comment
Squid Posted November 3, 2018 Share Posted November 3, 2018 Just now, Dimtar said: The first time I installed the docker I selected the LSIO container but it did install the Mace one. Delete the container. Then update CA and reinstall lsio. Then see if anything changes. Quote Link to comment
Dimtar Posted November 3, 2018 Share Posted November 3, 2018 5 minutes ago, Squid said: Delete the container. Then update CA and reinstall lsio. Then see if anything changes. I deleted the container and the appdata folder for it. Updated CA and re-installed. This time the template was right and I installed the LSIO version. The trouble now is that the webui doesn't load, just a blank screen. Quote Link to comment
Squid Posted November 3, 2018 Share Posted November 3, 2018 6 minutes ago, Dimtar said: I deleted the container and the appdata folder for it. Updated CA and re-installed. This time the template was right and I installed the LSIO version. The trouble now is that the webui doesn't load, just a blank screen. lol But at least now the problem is relevant to this particular thread and the lsio guys will be able to assist. Quote Link to comment
Dimtar Posted November 3, 2018 Share Posted November 3, 2018 3 minutes ago, Squid said: lol But at least now the problem is relevant to this particular thread and the lsio guys will be able to assist. Indeed. Appreciate the quick fix though, cheers. Quote Link to comment
Chaotic Posted November 20, 2018 Share Posted November 20, 2018 (edited) So been using this for a couple months now and it has been working fine. When I woke up this morning it is refusing to connect to the webUI. I get the login page and then when I log in it either says Quote Unable to log in, qBittorrent is probably unreachable. Or it appears to log in and I see the layout (categories on the left then torrents and details split on the right) but each section says Quote Error: Unknown I checked one of my torrent sites and it seems like my torrents aren't going either. I've checked for updates (and took an update) to the docker but still getting the same result. The logs for it are just repeating where the webUI is and what the username is for the admin (which is correct) [s6-finish] syncing disks. [s6-finish] sending all processes the TERM signal. [s6-finish] sending all processes the KILL signal and exiting. [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 10-adduser: executing... [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 10-adduser: executing... usermod: no changes ------------------------------------- _ () | | ___ _ __ | | / __| | | / \ | | \__ \ | | | () | |_| |___/ |_| \__/ Brought to you by linuxserver.io We gratefully accept donations at: https://www.linuxserver.io/donate/ ------------------------------------- GID/UID ------------------------------------- User uid: 99 User gid: 100 ------------------------------------- [cont-init.d] 10-adduser: exited 0. [cont-init.d] 30-config: executing... [cont-init.d] 30-config: exited 0. [cont-init.d] done. [services.d] starting services [services.d] done. ******** Information ******** To control qBittorrent, access the Web UI at http://localhost:8080 The Web UI administrator user name is: Edited November 20, 2018 by Chaotic Quote Link to comment
trurl Posted November 20, 2018 Share Posted November 20, 2018 17 minutes ago, Chaotic said: So been using this for a couple months now and it has been working fine. When I woke up this morning it is refusing to connect to the webUI. I get the login page and then when I log in it either says Or it appears to log in and I see the layout (categories on the left then torrents and details split on the right) but each section says I checked one of my torrent sites and it seems like my torrents aren't going either. I've checked for updates (and took an update) to the docker but still getting the same result. The logs for it are just repeating where the webUI is and what the username is for the admin (which is correct) Post your docker run command as seen here: https://forums.unraid.net/topic/57181-real-docker-faq/#comment-564345 Also your complete diagnostics zip from Unraid: Tools - Diagnostics Quote Link to comment
Chaotic Posted November 20, 2018 Share Posted November 20, 2018 5 minutes ago, trurl said: Post your docker run command as seen here: https://forums.unraid.net/topic/57181-real-docker-faq/#comment-564345 Also your complete diagnostics zip from Unraid: Tools - Diagnostics Command: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='qbittorrent' --net='bridge' -e TZ="America/New_York" -e HOST_OS="unRAID" -e 'PUID'='99' -e 'PGID'='100' -p '6881:6881/tcp' -p '6881:6881/udp' -p '8080:8080/tcp' -v '/mnt/user/downloads/':'/downloads':'rw' -v '/mnt/user/appdata/qbittorrent':'/config':'rw' 'linuxserver/qbittorrent' 26056657944ef7a9499bc90cbf235d017d0bedd681b13e98a4b123b9aa7b6481 The command finished successfully! tower-diagnostics-20181120-0937.zip Quote Link to comment
Chaotic Posted November 24, 2018 Share Posted November 24, 2018 On 11/20/2018 at 9:40 AM, Chaotic said: Command: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='qbittorrent' --net='bridge' -e TZ="America/New_York" -e HOST_OS="unRAID" -e 'PUID'='99' -e 'PGID'='100' -p '6881:6881/tcp' -p '6881:6881/udp' -p '8080:8080/tcp' -v '/mnt/user/downloads/':'/downloads':'rw' -v '/mnt/user/appdata/qbittorrent':'/config':'rw' 'linuxserver/qbittorrent' 26056657944ef7a9499bc90cbf235d017d0bedd681b13e98a4b123b9aa7b6481 The command finished successfully! tower-diagnostics-20181120-0937.zip Update on this it continued till today when I had time to actually look into it and attempted to reinstall qbittorrent docker and that seemed to fix the problem for about 30 mins and then it started back up again. I'm going to switch everything over to transmission for now so I can get back to my things working and then I'll keep checking this since I like qbittorrent better. Quote Link to comment
nismanoke Posted December 5, 2018 Share Posted December 5, 2018 Hi There, Installed the docker everything went well and have acces to web ui. Then i enter "admin" for user and "adminadmin" for password and it then tells me "invalid username or password". Have these changed or am i doing things wrong. Cheerz, Nismanoke Quote Link to comment
thestip Posted December 13, 2018 Share Posted December 13, 2018 Just installed this docker and I get the following error when starting the UI: [12.12.2018 17:02:38] WebUI started. [12.12.2018 17:02:38] Bad response from server: (401 [error,getplugins]) Unauthorized Then, if I click on the setting icon, I get: [12.12.2018 17:03:27] JS error: [http://10.0.0.151:8082/js/webui.js : 762] Uncaught TypeError: Cannot read property 'rTorrent' of undefined Any ideas? Quote Link to comment
newbaer Posted December 27, 2018 Share Posted December 27, 2018 (edited) Hi all, So I just added a cache drive to my server (a 250gig 970 evo) and set appdata/domains/system to prefer cache. Stopped docker and ran the mover so docker image gets moved to the cache then restarted docker. After doing so, qBittorrent's web ui reported "QBittorrent Client is not reachable". The tracker shows that all my torrents are stopped and chrome's developer tool reports the following error every other second: GET http://192.168.1.5:8080/api/v2/sync/maindata?rid=1&jq6bbjox 403 (Forbidden) mootools-1.2-core-yc.js:485 Edited December 27, 2018 by newbaer Quote Link to comment
sadeq Posted December 30, 2018 Share Posted December 30, 2018 the new qbittorrent release (4.1.5) includes a search tab in the web ui, can you please update to 4.1.5 ? Quote Link to comment
d2dyno Posted January 2, 2019 Share Posted January 2, 2019 On 12/12/2018 at 7:07 PM, thestip said: Just installed this docker and I get the following error when starting the UI: [12.12.2018 17:02:38] WebUI started. [12.12.2018 17:02:38] Bad response from server: (401 [error,getplugins]) Unauthorized Then, if I click on the setting icon, I get: [12.12.2018 17:03:27] JS error: [http://10.0.0.151:8082/js/webui.js : 762] Uncaught TypeError: Cannot read property 'rTorrent' of undefined Any ideas? Wrong thread. This is for qBittorrent , not rTorrent. Here is that support thread: On 12/30/2018 at 12:30 AM, sadeq said: the new qbittorrent release (4.1.5) includes a search tab in the web ui, can you please update to 4.1.5 ? I made a PR for this: https://github.com/linuxserver/docker-qbittorrent/pull/38 1 Quote Link to comment
Keint Posted January 17, 2019 Share Posted January 17, 2019 Hi everybody ! I m a noob at Unraid, I just created a new server, and I try to DL torrent file, but it s doesn't work... I tried with Deluge, Transmission and now with Qbittorrent. I setup my routeur with the good forwarding port, I setup the DL folder .... when I put a torrent files ( public or private tracker ) the files start to DL but few second after the speed drop down ! The sources are good, the trackers are working. If I put pause and resume, the torrent start to DL then stop again... I feel it s a kind of writing issue maybe ? If someone have any idea... Thanks !!!! Cheers Quote Link to comment
CyrixDX4 Posted January 29, 2019 Share Posted January 29, 2019 Is it possible to select the version that I want to use? 3.3.16 works vastly better for some trackers vs. others. Quote Link to comment
mikefallen Posted January 29, 2019 Share Posted January 29, 2019 Tried to install this but the webui does not work right after install Quote Link to comment
trurl Posted January 29, 2019 Share Posted January 29, 2019 1 hour ago, mikefallen said: Tried to install this but the webui does not work right after install Not much to go on as I'm sure you will agree. The first link in the Docker FAQ: Quote Link to comment
CyrixDX4 Posted February 4, 2019 Share Posted February 4, 2019 On 1/29/2019 at 4:04 PM, mikefallen said: Tried to install this but the webui does not work right after install Why are you on an unsupported/old build of UnRaid? 6.1 is deprecated, we are at 6.6.x now. Quote Link to comment
trurl Posted February 4, 2019 Share Posted February 4, 2019 1 hour ago, CyrixDX4 said: Why are you on an unsupported/old build of UnRaid? 6.1 is deprecated, we are at 6.6.x now. His sig has not been updated, probably since we moved to the new forum software. He probably isn't even aware we have sigs here since you have to enable them in order to see them. Looking at the most recent diagnostics he posted on another thread he is on 6.6.6 Quote Link to comment
mikefallen Posted February 14, 2019 Share Posted February 14, 2019 On 2/4/2019 at 11:22 AM, trurl said: His sig has not been updated, probably since we moved to the new forum software. He probably isn't even aware we have sigs here since you have to enable them in order to see them. Yeah I'm on latest ...not much to go on nothing in the docker logs indicate any issues.....installed the BitTorrent docker with vpn and just disabled the vpn and it works fine.... weird Quote Link to comment
trurl Posted February 14, 2019 Share Posted February 14, 2019 9 hours ago, mikefallen said: Yeah I'm on latest Since we have made you aware of sigs now why don't you fix it or delete it? Quote Link to comment
mikefallen Posted February 14, 2019 Share Posted February 14, 2019 2 hours ago, trurl said: Since we have made you aware of sigs now why don't you fix it or delete it? done Quote Link to comment
hrv231 Posted February 21, 2019 Share Posted February 21, 2019 Hello, I'm having trouble to set up permissions with this docker. I read the entire thread and manage to fix the empty webpage, the I configured qbittorrent and everything looks good, I'm able to download, but I can't make my other dockers works well with this one. I have pfsense vm being my firewall, I have my unraid and my dockers on the same net, but each docker with a separate IP, this qbitorrent with an IP and my Sonarr with another IP. For some reason every time I download something, this docker can move it to the proper folder (I have enabled incomplete folder and then when it finishes it moves the file to the category folder or the complete folder). But Sonarr is not able to access that file to move it or rename it for some reason. I already set the UMASK as someone described above but it doesn't seem to work. Can someone help me? Thanks. Quote Link to comment
ctrlaltd1337 Posted February 21, 2019 Share Posted February 21, 2019 (edited) I'm having a strange issue. If I go to the URL, I am greeted with "This site can’t be reached, ERR_INVALID_RESPONSE." If I refresh I get the same thing, but if I press enter in the address bar, it loads me to the login screen and everything works fine. Anybody else experiencing this or have an idea for a fix? Edited February 21, 2019 by ctrlaltd1337 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.