Squid Posted May 12, 2016 Share Posted May 12, 2016 When on my LAN it immediately gives me that error, doesn't even really try to startup. We don't even know if the container is installing correctly yet. Which is why I asked for that screen shot Sent from my LG-D852 using Tapatalk Quote Link to comment
BConn Posted May 13, 2016 Share Posted May 13, 2016 Could use some assistance: Every time I install a docker (so far two versions of Plex and EmbyServer) I start the application and then click the WebUI and for each one it gives me the error 'This site can't be reached'. I'm not sure if it's a problem with the configuration of my router or with my installing of apps / docker. post what appears after you add the apps (ie: at the bottom of the screen there is the docker run command) Here's the screen shot after installing Emby Quote Link to comment
Squid Posted May 13, 2016 Share Posted May 13, 2016 Could use some assistance: Every time I install a docker (so far two versions of Plex and EmbyServer) I start the application and then click the WebUI and for each one it gives me the error 'This site can't be reached'. I'm not sure if it's a problem with the configuration of my router or with my installing of apps / docker. post what appears after you add the apps (ie: at the bottom of the screen there is the docker run command) Here's the screen shot after installing Emby The reason why Emby isn't working is because you've passed Movies and TV Shows both mapped to /mnt (6.1.9 has a nasty habit of sometimes saying the command finished successfully when it didn't according to the line above it) Quote Link to comment
viper Posted June 1, 2016 Share Posted June 1, 2016 Hey Guys, I seem to have a problem where plex is filling my server log file and for the life of me cant find out why. It seems to occur after plex does its tasks at 2am, upon rebooting all logs clear. Ive tried to clean reinstall of plex with no success Unraid 6.1.9 ----------------------------------------------------------------------------------------------------------- System Log Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 72 bytes) in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(292) : eval()'d code on line 73 ----------------------------------------------------------------------------------------------------------- Cache Samsung_SSD_750_EVO_250GB_S2SHNWAH223169F - 250 GB (sdd) btrfs Used: 68.9 GB Free: 181 GB /mnt/cache ----------------------------------------------------------------------------------------------------------- Docker volume info btrfs filesystem show: Label: none uuid: 3e4207cf-5b20-458c-a03a-d5dca1c68bcf Total devices 1 FS bytes used 1.96GiB devid 1 size 25.00GiB used 4.04GiB path /dev/loop0 btrfs-progs v4.1.2 btrfs scrub status: scrub status for 3e4207cf-5b20-458c-a03a-d5dca1c68bcf no stats available total bytes scrubbed: 0.00B with 0 errors ----------------------------------------------------------------------------------------------------------- Plex Docker config /config /mnt/cache/appdata/PlexMediaServer/ /TV /mnt/user/TV/ /HD /mnt/user/Movies/HD/ ----------------------------------------------------------------------------------------------------------- Any help would be great cheers! Quote Link to comment
Squid Posted June 1, 2016 Share Posted June 1, 2016 Hey Guys, I seem to have a problem where plex is filling my server log file and for the life of me cant find out why. It seems to occur after plex does its tasks at 2am, upon rebooting all logs clear. Ive tried to clean reinstall of plex with no success Unraid 6.1.9 ----------------------------------------------------------------------------------------------------------- System Log Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 72 bytes) in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(292) : eval()'d code on line 73 ----------------------------------------------------------------------------------------------------------- Cache Samsung_SSD_750_EVO_250GB_S2SHNWAH223169F - 250 GB (sdd) btrfs Used: 68.9 GB Free: 181 GB /mnt/cache ----------------------------------------------------------------------------------------------------------- Docker volume info btrfs filesystem show: Label: none uuid: 3e4207cf-5b20-458c-a03a-d5dca1c68bcf Total devices 1 FS bytes used 1.96GiB devid 1 size 25.00GiB used 4.04GiB path /dev/loop0 btrfs-progs v4.1.2 btrfs scrub status: scrub status for 3e4207cf-5b20-458c-a03a-d5dca1c68bcf no stats available total bytes scrubbed: 0.00B with 0 errors ----------------------------------------------------------------------------------------------------------- Plex Docker config /config /mnt/cache/appdata/PlexMediaServer/ /TV /mnt/user/TV/ /HD /mnt/user/Movies/HD/ ----------------------------------------------------------------------------------------------------------- Any help would be great cheers! You'd need to post your diagnostics (and ideally install fix common problems plugin , run it then post diagnostics) I don't think plex is the issue Sent from my SM-T560NU using Tapatalk Quote Link to comment
viper Posted June 5, 2016 Share Posted June 5, 2016 Cool i have run Fix common problems and ran recommendations but still have the same issue i have attached diagnostics hope this can shed more light this is a line from the sys log that i could open This seems to be stemming from my original install, where i had my config in /appdata rather than /cache/appdata. Since then i have removed Plex and reinstalled but for some strange reason its still reverting back to the user shares? Jun 6 04:42:06 Server logger: ./appdata/OLD/Library/Application Support/Plex Media Server/Metadata/TV Shows/9/94aa49fe61d708fa6da15ee586f6d291448ae0a.bundle/Contents/_stored/seasons/15/posters/com.plexapp.agents.thetvdb_eac85b188ead891a06c382c00658041080b3aa4a Jun 6 04:42:06 Server shfs/user0: shfs_mkdir: assign_disk: appdata (28) No space left on device Jun 6 04:42:06 Server logger: rsync: recv_generator: mkdir "/mnt/user0/appdata" failed: No space left on device (28) https://www.dropbox.com/s/gsqxuyo8o995m4k/server-diagnostics-20160606-0834.zip?dl=0 Quote Link to comment
tr0910 Posted June 6, 2016 Share Posted June 6, 2016 Sync won't recognise existing pre populated data, copied by rsync -avPX //mnt/share1 /mnt/share2. Copied drive was then installed in another unRaid server, both running 6.1.9 and the latest limetech Sync. For 3 days now, Sync is endlessly recopying every file like this very slowly.... creamdoors.jpg.bts (seems to the the name of the temporary file being transferred) creamdoors.jpg (was already in the folder) Even though the exact same files are already in the destination folder with the exact same date and time. Initially, to connect the folders, I used this method where devices have different identities: http://help.getsync.com/hc/en-us/articles/205506569-Can-I-connect-two-pre-populated-folders- -> Add the folder from Computer 1. While adding the folder, change the path to the folder containing the files (instead of creating a copy of the folder from Computer 1). This is about 150GB / 30,000 files being synced to another computer across the world using BT Sync for Linux on unRaid. (posted on the getsync forum as follows) https://forum.getsync.com/topic/42533-sync-pre-populated-existing-folders-doesnt-recognise-matching-data/ Quote Link to comment
trurl Posted June 6, 2016 Share Posted June 6, 2016 Cool i have run Fix common problems and ran recommendations but still have the same issue i have attached diagnostics hope this can shed more light this is a line from the sys log that i could open This seems to be stemming from my original install, where i had my config in /appdata rather than /cache/appdata. Since then i have removed Plex and reinstalled but for some strange reason its still reverting back to the user shares? Jun 6 04:42:06 Server logger: ./appdata/OLD/Library/Application Support/Plex Media Server/Metadata/TV Shows/9/94aa49fe61d708fa6da15ee586f6d291448ae0a.bundle/Contents/_stored/seasons/15/posters/com.plexapp.agents.thetvdb_eac85b188ead891a06c382c00658041080b3aa4a Jun 6 04:42:06 Server shfs/user0: shfs_mkdir: assign_disk: appdata (28) No space left on device Jun 6 04:42:06 Server logger: rsync: recv_generator: mkdir "/mnt/user0/appdata" failed: No space left on device (28) https://www.dropbox.com/s/gsqxuyo8o995m4k/server-diagnostics-20160606-0834.zip?dl=0 Your appdata share is not set to Use cache disk: Only so it is getting moved. See Docker FAQ Quote Link to comment
viper Posted June 9, 2016 Share Posted June 9, 2016 Cheers guys all sorted The appdata was set to yes not only Greatly appreciated! Quote Link to comment
jedimstr Posted June 12, 2016 Share Posted June 12, 2016 Now that Plex Media Server 0.9.17.2 is available for Plex Pass users (https://forums.plex.tv/discussion/62832/plex-media-server#latest), and the Limetech Docker Container for Plex Media Server is based on a PlexPass download, does that mean we'll get 0.9.17.2 soon? The current container only goes up to 0.9.16.6. Or are you guys waiting for PMS 0.9.17.x to be available to everyone first? Quote Link to comment
mr-hexen Posted June 12, 2016 Share Posted June 12, 2016 Heads up for v5 users: (Linux) unRAID 32-bit is no longer supported (see https://support.plex.tv/hc/en-us/articles/218212517) Quote Link to comment
Leondre Posted June 17, 2016 Share Posted June 17, 2016 When using the plex docker it often takes up to a minute for any show to start playing if it uses subtitles (also occurs during seeking). It seems like there is a massive delay before anything will start transcoding. I installed plex on a windows 10 vm and it only takes maybe 5 seconds at most for anything to start playing. Any ideas how I can solve this? I would prefer to use the docker. I'm not very linux savvy so please bear with me. tower-diagnostics-20160616-1912.zip Quote Link to comment
jedimstr Posted June 22, 2016 Share Posted June 22, 2016 So... 0.9.17.3 of Plex is out now for PlexPass and still no update from the Limetech Docker Repo since 0.9.16.6. Is it only on the Public track? Quote Link to comment
flimflamman Posted June 24, 2016 Share Posted June 24, 2016 There's a new 1.0 (public) release that the official docker does not pull. anyone else having this issue? Quote Link to comment
jedimstr Posted June 24, 2016 Share Posted June 24, 2016 Alongside the release of Plex Media Server 1.0 to the Public channel, they're also cleaning out their download archives of all versions of Plex lower than 1.0 and are only maintaining support/development of version 1.0+ going forward. We need the Limetech PMS Docker instance updated to the new and now ONLY officially supported release version. UPDATE: Ok I just did a migration of my Plex Server stuff from the Limetech repo to the LinuxServer.io repo. I got tired of waiting for version updates that never come so I just switched to the LinuxServer.io repo for Plex from the Limetech one since LinuxServer.io keeps theirs up to date. Here are the steps I took: [*]Make note of your container mapped custom media path settings if you have them specifically set for PMS (for instance mine map /Media to /mnt/user/Media) [*]Shutdown the Limetech PMS container, but don't delete it yet [*]Backup your appdata config for PlexMedia Server (mine was in /mnt/cache/appdata/PlexMediaServer) to another folder for safety [*]Add the LinuxServer.io Plex container. It can coexist with the other one temporarily as long as the other one isn't running since they're named differently [*]Add the mapped media path you had in the Limetech container settings if you had it set there. It's not there by default in LinuxServer.io (although you could use the /user mapping that it does come with, I prefer a direct reference for isolation) [*]The LinuxServer.io container will automatically startup after you're done setting it up and saving/apply. Access the server via the webUI and log in. [*]Once the new Plex container is up and running after initial wizards, shut that container down again. [*]With both containers shutdown, copy all the content from /mnt/cache/appdata/PlexMediaServer/Library/Application Support/Plex Media Server to /mnt/cache/appdata/plex/Library/Application Support/Plex Media Server (or whatever old and new Plex paths you have for the appdata stuff) [*]Once you're done copying all the appdata stuff, startup your new Plex container again. [*]Access the new Plex server via WebUI or from the Plex.tv site. Verify all your content, settings, channels, and custom Agents survived the transition, and that you're on the latest 1.0.0.2261 version in the Settings/Server page [*]When you're satisfied everything survived the transition, you can delete the old Plex Media Server container. [*]Update any other container paths that refer to your Plex Media Server install (i.e. the logs path for plexpy) since it will be under a new location in appdata Quote Link to comment
thomast_88 Posted June 27, 2016 Share Posted June 27, 2016 Alongside the release of Plex Media Server 1.0 to the Public channel, they're also cleaning out their download archives of all versions of Plex lower than 1.0 and are only maintaining support/development of version 1.0+ going forward. We need the Limetech PMS Docker instance updated to the new and now ONLY officially supported release version. UPDATE: Ok I just did a migration of my Plex Server stuff from the Limetech repo to the LinuxServer.io repo. I got tired of waiting for version updates that never come so I just switched to the LinuxServer.io repo for Plex from the Limetech one since LinuxServer.io keeps theirs up to date. Here are the steps I took: [*]Make note of your container mapped custom media path settings if you have them specifically set for PMS (for instance mine map /Media to /mnt/user/Media) [*]Shutdown the Limetech PMS container, but don't delete it yet [*]Backup your appdata config for PlexMedia Server (mine was in /mnt/cache/appdata/PlexMediaServer) to another folder for safety [*]Add the LinuxServer.io Plex container. It can coexist with the other one temporarily as long as the other one isn't running since they're named differently [*]Add the mapped media path you had in the Limetech container settings if you had it set there. It's not there by default in LinuxServer.io (although you could use the /user mapping that it does come with, I prefer a direct reference for isolation) [*]The LinuxServer.io container will automatically startup after you're done setting it up and saving/apply. Access the server via the webUI and log in. [*]Once the new Plex container is up and running after initial wizards, shut that container down again. [*]With both containers shutdown, copy all the content from /mnt/cache/appdata/PlexMediaServer/Library/Application Support/Plex Media Server to /mnt/cache/appdata/plex/Library/Application Support/Plex Media Server (or whatever old and new Plex paths you have for the appdata stuff) [*]Once you're done copying all the appdata stuff, startup your new Plex container again. [*]Access the new Plex server via WebUI or from the Plex.tv site. Verify all your content, settings, channels, and custom Agents survived the transition, and that you're on the latest 1.0.0.2261 version in the Settings/Server page [*]When you're satisfied everything survived the transition, you can delete the old Plex Media Server container. [*]Update any other container paths that refer to your Plex Media Server install (i.e. the logs path for plexpy) since it will be under a new location in appdata Thanks for the detailed walk-through. I just made the same transition to ls.io without any issues. Now I'm running PMS 1.0. Quote Link to comment
GreenEyedMonster Posted June 29, 2016 Share Posted June 29, 2016 I think I might have to make the switch as well... this is taking a bit to long. Quote Link to comment
Steelerfanatic Posted July 3, 2016 Share Posted July 3, 2016 Alongside the release of Plex Media Server 1.0 to the Public channel, they're also cleaning out their download archives of all versions of Plex lower than 1.0 and are only maintaining support/development of version 1.0+ going forward. We need the Limetech PMS Docker instance updated to the new and now ONLY officially supported release version. UPDATE: Ok I just did a migration of my Plex Server stuff from the Limetech repo to the LinuxServer.io repo. I got tired of waiting for version updates that never come so I just switched to the LinuxServer.io repo for Plex from the Limetech one since LinuxServer.io keeps theirs up to date. Here are the steps I took: [*]Make note of your container mapped custom media path settings if you have them specifically set for PMS (for instance mine map /Media to /mnt/user/Media) [*]Shutdown the Limetech PMS container, but don't delete it yet [*]Backup your appdata config for PlexMedia Server (mine was in /mnt/cache/appdata/PlexMediaServer) to another folder for safety [*]Add the LinuxServer.io Plex container. It can coexist with the other one temporarily as long as the other one isn't running since they're named differently [*]Add the mapped media path you had in the Limetech container settings if you had it set there. It's not there by default in LinuxServer.io (although you could use the /user mapping that it does come with, I prefer a direct reference for isolation) [*]The LinuxServer.io container will automatically startup after you're done setting it up and saving/apply. Access the server via the webUI and log in. [*]Once the new Plex container is up and running after initial wizards, shut that container down again. [*]With both containers shutdown, copy all the content from /mnt/cache/appdata/PlexMediaServer/Library/Application Support/Plex Media Server to /mnt/cache/appdata/plex/Library/Application Support/Plex Media Server (or whatever old and new Plex paths you have for the appdata stuff) [*]Once you're done copying all the appdata stuff, startup your new Plex container again. [*]Access the new Plex server via WebUI or from the Plex.tv site. Verify all your content, settings, channels, and custom Agents survived the transition, and that you're on the latest 1.0.0.2261 version in the Settings/Server page [*]When you're satisfied everything survived the transition, you can delete the old Plex Media Server container. [*]Update any other container paths that refer to your Plex Media Server install (i.e. the logs path for plexpy) since it will be under a new location in appdata Just completed this. When I installed the new LinuxServer.io docker I pointed the config to the old appdata location where the Limetech version was installed. I basically eliminated 7-9. It came up just fine and there was no need for copying all the appdata stuff. Everything seems to be working fine. Do you see any problems with doing it this way? I still have a copy of the old data and I have not deleted the Limetech docker yet. Quote Link to comment
CHBMB Posted July 3, 2016 Share Posted July 3, 2016 Not if it's worked. Wouldn't advise it as sometimes different container versions map the appdata slightly differently, so it's good to see the "lie of the land" before you copy across so you can confirm the folder structure is the same. Quote Link to comment
Steelerfanatic Posted July 3, 2016 Share Posted July 3, 2016 Not if it's worked. Wouldn't advise it as sometimes different container versions map the appdata slightly differently, so it's good to see the "lie of the land" before you copy across so you can confirm the folder structure is the same. Yea, not what I would normally do, but I was rushing through it and made a mistake copying in the same config path. Good thing it didn't come back to bite me. Thanks. Quote Link to comment
brisimmons105 Posted July 5, 2016 Share Posted July 5, 2016 Is there a plan to update this docker, or is it no longer supported? Quote Link to comment
BillClinton Posted July 6, 2016 Share Posted July 6, 2016 I just updated this docker to Plex 1.0 I just shut the App down and went into "edit" the docker and without changing any settings pressed the save button, and everything updates fine. For your info; I am not running a Plexpass version. so I can't say it will work in all circumstances. Hope this help guys. Quote Link to comment
CHBMB Posted July 6, 2016 Share Posted July 6, 2016 I just updated this docker to Plex 1.0 I just shut the App down and went into "edit" the docker and without changing any settings pressed the save button, and everything updates fine. For your info; I am not running a Plexpass version. so I can't say it will work in all circumstances. Hope this help guys. That's not an ideal way to update apps within a container. Sooner or later doing this will break something. TBH a far better approach would be to migrate to a Plex version from another author. Linuxserver.io or Binhex would be the way to go here in my opinion. Quote Link to comment
BillClinton Posted July 6, 2016 Share Posted July 6, 2016 I just updated this docker to Plex 1.0 I just shut the App down and went into "edit" the docker and without changing any settings pressed the save button, and everything updates fine. For your info; I am not running a Plexpass version. so I can't say it will work in all circumstances. Hope this help guys. That's not an ideal way to update apps within a container. Sooner or later doing this will break something. TBH a far better approach would be to migrate to a Plex version from another author. Linuxserver.io or Binhex would be the way to go here in my opinion. Is the limetech plex app not supported anymore? What's the exact reason for migrating to another author? Sent from my iPad using Tapatalk Quote Link to comment
Recommended Posts
Posted by SpaceInvaderOne,
4 reactions
Go to this post
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.