nickp85 Posted December 26, 2021 Share Posted December 26, 2021 Just now, soder said: Hmm, will also path and such stuff be saved? Path configured in the docker? Yes your template is saved Quote Link to comment
soder Posted December 26, 2021 Share Posted December 26, 2021 8 minutes ago, nickp85 said: Yes your template is saved No it wasn't. I removed the docker from Unraid, checking to also remove the docker file. When adding it back, I had to fill in my paths again... Quote Link to comment
Squid Posted December 26, 2021 Share Posted December 26, 2021 1 minute ago, soder said: When adding it back, I had to fill in my paths again... Only if you installed another template named the exact same name. You wanted to use Apps - Previous Apps Quote Link to comment
nickp85 Posted December 26, 2021 Share Posted December 26, 2021 Just now, soder said: No it wasn't. I removed the docker from Unraid, checking to also remove the docker file. When adding it back, I had to fill in my paths again... Did you pick "plex" from the list of templates? It's definitely maintained. Quote Link to comment
nickp85 Posted December 26, 2021 Share Posted December 26, 2021 1 minute ago, Squid said: Only if you installed another template named the exact same thing. You wanted to use Apps - Previous Apps never knew about that, more elegant than my approach. I just click "Add Container" from the Docker screen and pick the template Quote Link to comment
soder Posted December 26, 2021 Share Posted December 26, 2021 8 minutes ago, nickp85 said: Did you pick "plex" from the list of templates? It's definitely maintained. After uninstalling Plex, and removed the docker file, I went to "apps", searched for Plex and tock the version from linuxserver's Repository, and there the version "on top" that was "docker" in VERSION and "lscr.io/linuxserver/plex" in repo (the lscr.io part is new for me). After that, the path I had before was gone, and I noticed a small difference in the layout from my previous version... Anyhow, now I'm back, adding my media as path and transcode to /dev/shm Quote Link to comment
Squid Posted December 26, 2021 Share Posted December 26, 2021 10 minutes ago, nickp85 said: I just click "Add Container" The drop down will probably disappear at some point during 6.10 but definitely by 6.11 1 Quote Link to comment
Squid Posted December 26, 2021 Share Posted December 26, 2021 Just now, soder said: After uninstalling Plex, and removed the docker file, I went to "apps", searched for Plex and tock the version from linuxserver's Repository, and there the version "on top" that was "docker" in VERSION and "lscr.io/linuxserver/plex" in repo (the lscr.io part is new for me). It's a semantic change, but effectively it is a different template. If it wasn't for that semantic change in the repository, the LinuxServer Plex would have also given a Reinstall option, but because it's effectively a new template it didn't. Previous Apps is where you pretty much always want to look whenever reinstalling something and keeping your settings and not searching. Quote Link to comment
eagle470 Posted December 28, 2021 Share Posted December 28, 2021 My plex instance has a shitload of transcoded opbjects it's stashing, I can't see how to delete them from the server app and having blown them away once via command line, they came back. thoughts? Quote Link to comment
Cessquill Posted December 28, 2021 Share Posted December 28, 2021 20 minutes ago, eagle470 said: My plex instance has a shitload of transcoded opbjects it's stashing, I can't see how to delete them from the server app and having blown them away once via command line, they came back. thoughts? Turn off downloads for any friends/family might be worth looking at. AFAIK you can't remove downloads that somebody else has set up, and if their client doesn't log on and download it, it will constantly get converted and sit there waiting. Quote Link to comment
eagle470 Posted December 30, 2021 Share Posted December 30, 2021 On 12/28/2021 at 10:25 AM, Cessquill said: Turn off downloads for any friends/family might be worth looking at. AFAIK you can't remove downloads that somebody else has set up, and if their client doesn't log on and download it, it will constantly get converted and sit there waiting. where is that setting at? Quote Link to comment
wgstarks Posted December 30, 2021 Share Posted December 30, 2021 21 minutes ago, eagle470 said: where is that setting at? Select each friend and then restrictions. 1 Quote Link to comment
TheMarlow Posted December 31, 2021 Share Posted December 31, 2021 i just completed a multi state move so my server was down for a couple of days. As of last night the server went down. Log file is below. i have tried uninstalling and reinstalling the docker image but still see the same output in the log file. the plex server can not be found inside or outside of my network. I know the referenced file is for USB TV devices which i do not have any but it should also not be preventing the server from standing up. Any help would be appreciated. Thank you (and happy new years) [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 01-envfile: executing... [cont-init.d] 01-envfile: exited 0. [cont-init.d] 01-migrations: executing... [migrations] started [migrations] no migrations found [cont-init.d] 01-migrations: exited 0. [cont-init.d] 10-adduser: executing... ------------------------------------- _ () | | ___ _ __ | | / __| | | / \ | | \__ \ | | | () | |_| |___/ |_| \__/ Brought to you by linuxserver.io ------------------------------------- To support LSIO projects visit: https://www.linuxserver.io/donate/ ------------------------------------- GID/UID ------------------------------------- User uid: 99 User gid: 100 ------------------------------------- [cont-init.d] 10-adduser: exited 0. [cont-init.d] 40-chown-files: executing... [cont-init.d] 40-chown-files: exited 0. [cont-init.d] 45-plex-claim: executing... [cont-init.d] 45-plex-claim: exited 0. [cont-init.d] 50-gid-video: executing... [cont-init.d] 50-gid-video: exited 0. [cont-init.d] 60-plex-update: executing... ##################################################### # Login via the webui at http://<ip>:32400/web # # and restart the docker, because there was no # # preference file found, possibly first startup. # ##################################################### [cont-init.d] 60-plex-update: exited 0. [cont-init.d] 90-custom-folders: executing... [cont-init.d] 90-custom-folders: exited 0. [cont-init.d] 99-custom-scripts: executing... [custom-init] no custom files found exiting... [cont-init.d] 99-custom-scripts: exited 0. [cont-init.d] done. [services.d] starting services [services.d] done. Starting Plex Media Server. Critical: libusb_init failed Quote Link to comment
TheDaveAbides Posted January 1, 2022 Share Posted January 1, 2022 I recently moved from Windows to Unraid. Plex is working fine (even better than before), however none of my local extras will play. I get the error "please check that this file exists." A deeper dive shows all of those extras are still referencing the Windows path even though the main movie/TV files play fine with the correct Docker path. While I can pull the folders out/scan, put back in, I lose things like chosen artwork and collections, and it shows as a recently added movie. Any thoughts on how to correct the local extra paths without pulling out the entire movie & TV folders? Quote Link to comment
Cessquill Posted January 1, 2022 Share Posted January 1, 2022 15 minutes ago, TheDaveAbides said: Any thoughts on how to correct the local extra paths without pulling out the entire movie & TV folders? You could try "Refresh All Metadata" and maybe "analyze" across each of your library entries (just a guess, but it might help flush out issues like this) 1 Quote Link to comment
TheDaveAbides Posted January 1, 2022 Share Posted January 1, 2022 Thanks @Cessquill! It was refresh all Metadata. I was concerned I'd lose some artwork, but still better than the alternative. Quote Link to comment
Sinister Posted January 4, 2022 Share Posted January 4, 2022 (edited) Sorry if this has been covered but i could not find my specific error message, I thought i was going to be a smart guy and try to add hardware transcoding to plex. It would not start after the setup, i followed youtube guide to the T after finishing plex would not start and when checking the logs i get Error: Unable to set up server: sqlite3_statement_backend::prepare: disk I/O error for SQL: PRAGMA cache_size=2000 (N4soci10soci_errorE here is a screenshot of docker i am using Please help i dont want to set it up all over again Edited January 4, 2022 by Sinister manners Quote Link to comment
Cessquill Posted January 4, 2022 Share Posted January 4, 2022 5 hours ago, Sinister said: here is a screenshot of docker i am using I can't see the rest of your settings, but you haven't filled in the "extra parameters" on that screenshot (instructions at the top when you edit the docker). Quote Link to comment
saarg Posted January 4, 2022 Share Posted January 4, 2022 7 hours ago, Sinister said: Sorry if this has been covered but i could not find my specific error message, I thought i was going to be a smart guy and try to add hardware transcoding to plex. It would not start after the setup, i followed youtube guide to the T after finishing plex would not start and when checking the logs i get Error: Unable to set up server: sqlite3_statement_backend::prepare: disk I/O error for SQL: PRAGMA cache_size=2000 (N4soci10soci_errorE here is a screenshot of docker i am using Please help i dont want to set it up all over again Looks like your database is corrupt. Cache disk full or any other issues? Quote Link to comment
Sinister Posted January 4, 2022 Share Posted January 4, 2022 5 hours ago, Cessquill said: I can't see the rest of your settings, but you haven't filled in the "extra parameters" on that screenshot (instructions at the top when you edit the docker). I removed the gpu ID and extra parameters settings in hopes it would work like it once did Quote Link to comment
Sinister Posted January 4, 2022 Share Posted January 4, 2022 4 hours ago, saarg said: Looks like your database is corrupt. Cache disk full or any other issues? 1TB samsung NVME only 150GB used not even close to full Quote Link to comment
freezingkiwis Posted January 6, 2022 Share Posted January 6, 2022 So, plex-linuxserver running in Docker on Unraid. Plex found at: http://192.168.178.25:32400/web/index.html <- I can connect to this and browse it, and successfully setup my Plex server and established 3 libraries last night: Today, I'm receiving this error that TOWER is currently unavailable: This was available 12 hours ago when I set things up. I'm 100% sure that the TOWER server is available, but why is plex-linuxserver responding like this? These are my settings in the Docker container, and I feel like I'm missing something but have no idea what it should be: I've had this working successfully in the past for many many years, but recently swapped out some hard drives. One of my drives is 100% full and I'm currently in the process of moving the files to another drive, could this be causing this??? Quote Link to comment
ashman70 Posted January 9, 2022 Share Posted January 9, 2022 (edited) Hello, I am currently running Plex on a server with an Nvidia P2000 and it has been running great for years. I am looking to downsize my setup and replace my dual CPU motherboard and P2000 with a smaller motherboard utilizing intel Quicksync. How would I go about doing that in terms of removing the Nvidia integration in my Plex docker? All the media locations will remain the same, my concern is removing all the Nvidia entries, and then I believe I would need to reload Plex with a non Nvidia integrated version? Edited January 9, 2022 by ashman70 Quote Link to comment
Hoopster Posted January 9, 2022 Share Posted January 9, 2022 (edited) 3 hours ago, ashman70 said: How would I go about doing that in terms of removing the Nvidia integration in my Plex docker? Follow this guide to implement QuickSync video transcoding in Plex. You would replace the Nvidia specific parameters in Extra Parameters with the /dev/dri device as well as eliminating any Nvidia integration specific variables. If you are on unRAID 6.9.2, you should use the touch method (rather than go file entries) to create i915.conf to load the i915 drivers for iGPU. touch /boot/config/modprobe.d/i915.conf Edited January 9, 2022 by Hoopster 1 Quote Link to comment
ashman70 Posted January 10, 2022 Share Posted January 10, 2022 Thanks, but how do I remove the Nvidia integration with Plex first? I assume I have to do that before shutting down my server and removing my P2000? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.