Necrotic Posted August 22, 2017 Share Posted August 22, 2017 (edited) 13 hours ago, Squid said: You should run a Memtest from the boot menu if only to rule it out. Thanks, I got home and removed the ram each one and blew it for possible dusting. I am running a Memtest right now and will see how it goes. If there is no error, how do I recover my docker? Should I just manually run that first command in the command line? Otherwise they don't show in my list. Edited August 23, 2017 by Necrotic Edit: Nevermind, I used that and it worked. Quote Link to comment
Inimical Posted August 30, 2017 Share Posted August 30, 2017 I've recently upgraded my internet connection to Gig speed, I regularly download at about 80-90MB's. Seems SAB can't handle this and it slows my entire unRAID server to a crawl. Is there a way to resolve this and still maintain the speeds? Should I be looking for an alternative to SAB? Thanks. Quote Link to comment
Squid Posted August 30, 2017 Share Posted August 30, 2017 1 hour ago, Inimical said: Should I be looking for an alternative to SAB? NZBGet is far far more efficiently programmed (C++ vs python) Quote Link to comment
lixe Posted August 31, 2017 Share Posted August 31, 2017 On 23.2.2017 at 1:19 AM, Synaptix said: Is anybody experiencing their server completely unresponsive whenever Sabnzbd is unpacking? Honestly, I'm not sure if this is a problem with Sabnzbd or Radarr. Whenever a movie is finished downloading and unpacking, it completely freezes my server, where docker containers' WebGUI are unresponsive and Plex stops streaming a movie. Once it is unpacked, everything starts up again. Yes, i have the exact same problem. Doesn't matter whether I'm using Sab or Nzgbet... I'm not using a SSD as cache yet, but I don't think that that's the main problem. I've read something about CPU wait for I/O time in an other thread, but even limiting my CPU and Memory resources by using a docker command doesn't solve the problem Quote Link to comment
Fredrick Posted September 8, 2017 Share Posted September 8, 2017 On 31/08/2017 at 8:15 AM, lixe said: Yes, i have the exact same problem. Doesn't matter whether I'm using Sab or Nzgbet... I'm not using a SSD as cache yet, but I don't think that that's the main problem. I've read something about CPU wait for I/O time in an other thread, but even limiting my CPU and Memory resources by using a docker command doesn't solve the problem I'm having the same issue here, netstat shows I/Owait off the charts, and unpacking is very very slow. I have pinned CPUs for my SAB-docker, but I guess that doesn't help when its hogging the array. I've got it set up to download and extract to the SSD-cache, but when Radarr moves the files they are shipped directly to array. Might have been better to also move to cache, and have the mover do its job during the night, but my SSD is too small to handle days with heavy downloading unfortunately. Anyone have ideas? Quote Link to comment
CraziFuzzy Posted September 19, 2017 Share Posted September 19, 2017 Is there a way to set the umask inside the container? I noticed everything is written with the default umask of 022, which makes it difficult to manipulate downloaded files using different unraid/share users. Quote Link to comment
fotd Posted November 10, 2017 Share Posted November 10, 2017 On 2/22/2017 at 7:19 PM, Synaptix said: Is anybody experiencing their server completely unresponsive whenever Sabnzbd is unpacking? Honestly, I'm not sure if this is a problem with Sabnzbd or Radarr. Whenever a movie is finished downloading and unpacking, it completely freezes my server, where docker containers' WebGUI are unresponsive and Plex stops streaming a movie. Once it is unpacked, everything starts up again. On 8/31/2017 at 2:15 AM, lixe said: Yes, i have the exact same problem. Doesn't matter whether I'm using Sab or Nzgbet... I'm not using a SSD as cache yet, but I don't think that that's the main problem. I've read something about CPU wait for I/O time in an other thread, but even limiting my CPU and Memory resources by using a docker command doesn't solve the problem On 9/8/2017 at 4:02 PM, Fredrick said: I'm having the same issue here, netstat shows I/Owait off the charts, and unpacking is very very slow. I have pinned CPUs for my SAB-docker, but I guess that doesn't help when its hogging the array. I've got it set up to download and extract to the SSD-cache, but when Radarr moves the files they are shipped directly to array. Might have been better to also move to cache, and have the mover do its job during the night, but my SSD is too small to handle days with heavy downloading unfortunately. Anyone have ideas? You may want to check this thread, I've only used SSD cache drives but stopping using btrfs solved my issue. This was plaguing me for at least a year or more, if multiple things going and moving a file over 10GB would hose everything up until it was complete. I only have 1 cache drive so going to xfs was easy. Quote Link to comment
steve1977 Posted November 25, 2017 Share Posted November 25, 2017 Thanks for the development. I started using it and it is very good. I have two questions related to updating the docker: 1) I am only using it for a short time and the docker frequently can be updated. This is weird as sabnzbd only has stable updates once every few months. Am I accidentally using nightly builds? 2) The OP says that an auto-update function exists. How can this be enabled and is it recommended to do so? Quote Link to comment
saarg Posted November 25, 2017 Share Posted November 25, 2017 2 hours ago, steve1977 said: Thanks for the development. I started using it and it is very good. I have two questions related to updating the docker: 1) I am only using it for a short time and the docker frequently can be updated. This is weird as sabnzbd only has stable updates once every few months. Am I accidentally using nightly builds? 2) The OP says that an auto-update function exists. How can this be enabled and is it recommended to do so? 1. We update all our containers weekly. That doesn't mean the application itself was updated, but there might packages in the base OS that needed updates for security patches or other things. 2. I don't see any auto-update in the OP. If you refer to the stable or unstable tag, it says how in the OP. If you don't want the development branch, and didn't add it when you installed the container, you don't have to do anything. Quote Link to comment
steve1977 Posted November 25, 2017 Share Posted November 25, 2017 On 8/25/2015 at 10:44 PM, sparklyballs said: self updating as other linuxserver containers are, and a newly compiled par2 that's more recent than 5 years old. Sorry, not the OP, but the third post. See above the comment on self-updating. Is this possible now? Same question for other dockers. Quote Link to comment
saarg Posted November 25, 2017 Share Posted November 25, 2017 2 minutes ago, steve1977 said: Sorry, not the OP, but the third post. See above the comment on self-updating. Is this possible now? Same question for other dockers. There are no updates done inside the container. Only our weekly image refresh, which shows as an update ready on the docker page of unraid. Quote Link to comment
sparklyballs Posted November 25, 2017 Share Posted November 25, 2017 6 minutes ago, steve1977 said: Sorry, not the OP, but the third post. See above the comment on self-updating. Is this possible now? Same question for other dockers. no we stopped autoupdates on all our images with the exception of plex it created so many problems that outweighed any "benefit" and we switched to a weekly refresh model Quote Link to comment
steve1977 Posted November 25, 2017 Share Posted November 25, 2017 Got it. Will update manually. I am also taking away that I need to keep the auto-updates inside the dockers disabled (e.g., Sonarr offers). Otherwise, I am calling for trouble with the docker I assume? Quote Link to comment
Necrotic Posted December 16, 2017 Share Posted December 16, 2017 (edited) I am having some problems with this docker. All of the sudden I am getting the following error on the dashboard: "Too little diskspace forcing PAUSE" Both the incomplete and complete folders are bound to my cache drive, which has 100GB+ of free space yet its happening all the time now. I was able to force it to finish a download by pausing and unpausing multiple times, but its not happening all over. Below is the section in the code where it pauses. 2017-12-15 19:56:17,177::INFO::[directunpacker:265] DirectUnpacked volume 33 for aBtwz76srBc3AATP 2017-12-15 19:56:23,205::WARNING::[assembler:77] Too little diskspace forcing PAUSE 2017-12-15 19:56:23,205::INFO::[downloader:277] Pausing 2017-12-15 19:56:23,205::INFO::[directunpacker:445] Aborting all DirectUnpackers 2017-12-15 19:56:23,205::INFO::[directunpacker:372] Aborting DirectUnpack for aBtwz76srBc3AATP Does anyone have suggestions about what is going on? sabnzbd (2).log Edited December 16, 2017 by Necrotic Quote Link to comment
Squid Posted December 16, 2017 Share Posted December 16, 2017 Cache drive btrfs? Wouldn't be a bad idea to post the diagnostics if it is Quote Link to comment
Necrotic Posted December 16, 2017 Share Posted December 16, 2017 (edited) 5 minutes ago, Squid said: Cache drive btrfs? Wouldn't be a bad idea to post the diagnostics if it is Yes, which diagnostics in particular? the SMART report? If so here it is: Samsung_SSD_850_EVO_250GB_S21NNXBGA75793K-20171216-0155.txt Edit: Just in case here is the unraid one: unraid-diagnostics-20171216-0158.zip Edited December 16, 2017 by Necrotic Quote Link to comment
Squid Posted December 16, 2017 Share Posted December 16, 2017 1 minute ago, Necrotic said: which diagnostics in particular? the entire zip Quote Link to comment
Necrotic Posted December 16, 2017 Share Posted December 16, 2017 Edited my post. Seems like my entire system just went on the fritz.... Quote Link to comment
Squid Posted December 16, 2017 Share Posted December 16, 2017 This is the problem Label: none uuid: 5d187e56-3a61-43d8-bb94-7e846712a666 Total devices 1 FS bytes used 121.36GiB devid 1 size 232.89GiB used 232.89GiB path /dev/sdh1 Wait for @johnnie.black (the btrfs god) Although btrfs is stable, anecdotally there is less problems with using XFS if you have no intention of ever getting a cache pool going. Quote Link to comment
Necrotic Posted December 16, 2017 Share Posted December 16, 2017 Well shoot, I think this is what it did automatically. I am in the wrong place then for this post then...Do you think I should go and repost, if so where? I did manage to go in and wipe the recycle bin, that cleared some space and seemed to give me some breathing room. Quote Link to comment
JorgeB Posted December 16, 2017 Share Posted December 16, 2017 37 minutes ago, Necrotic said: Yes, which diagnostics in particular? the SMART report? If so here it is: Samsung_SSD_850_EVO_250GB_S21NNXBGA75793K-20171216-0155.txt Edit: Just in case here is the unraid one: unraid-diagnostics-20171216-0158.zip Btrfs filesystem is fully allocated and needs to be rebalanced, see here: https://forums.lime-technology.com/topic/54533-624-cache-drive-reporting-quotno-space-left-on-diskquot/#comment-532931 1 Quote Link to comment
Necrotic Posted December 16, 2017 Share Posted December 16, 2017 29 minutes ago, johnnie.black said: Btrfs filesystem is fully allocated and needs to be rebalanced, see here: https://forums.lime-technology.com/topic/54533-624-cache-drive-reporting-quotno-space-left-on-diskquot/#comment-532931 Thanks. I got the following: Done, had to relocate 11 out of 235 chunks The cache now says: Data, single: total=220.01GiB, used=68.10GiB System, single: total=4.00MiB, used=48.00KiB Metadata, single: total=2.01GiB, used=619.44MiB GlobalReserve, single: total=285.98MiB, used=0.00B Now the big question is, how do I get it back to xfs without messing everything up? Quote Link to comment
JorgeB Posted December 16, 2017 Share Posted December 16, 2017 38 minutes ago, Necrotic said: Now the big question is, how do I get it back to xfs without messing everything up? You can use the replace cache procedure and format xfs instead of replace: https://forums.lime-technology.com/topic/46802-faq-for-unraid-v6/?do=findComment&comment=511923 1 Quote Link to comment
Rick Sanchez Posted January 16, 2018 Share Posted January 16, 2018 (edited) Does anyone know or have a guide that details how to auto delete folders? Along with why I keep receiving the following error while trying to access the web GUI: This site can’t be reached The connection was reset. Try: Checking the connection Checking the proxy and the firewall ERR_CONNECTION_RESET ReloadHIDE DETAILS I have reinstalled the software 8+ times in the past month, but after a day or two, the error returns... Edited January 16, 2018 by hilljd00 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.