pyle77 Posted May 14, 2022 Share Posted May 14, 2022 3 hours ago, ghost82 said: It's an error in the L1 cache Oh I see! My CPU is not overclocked, bios is up to date and case is clean and free from dust inside. The PSU may be the problem, I think. It's a cheap PSU that I am using for one month now, waiting my CX600 to come back from service. Anyway, thank you so much for the time you spent to me. I really appreciate it! Cheers Quote Link to comment
Squid Posted May 14, 2022 Author Share Posted May 14, 2022 49 minutes ago, olschool said: I can't specifically identify what may be filling my syslog, any expert guidance would be appreciated. Something is basically continually writing to your flash drive and the backup feature of MyServers keeps backing up Apr 18 04:41:41 YoungStewtsGen flash_backup: adding task: /usr/local/emhttp/plugins/dynamix.my.servers/scripts/UpdateFlashBackup update ### [PREVIOUS LINE REPEATED 439 TIMES] ### (one of many many entries) You're going to want to post here: https://forums.unraid.net/topic/112745-stop-useless-backups/#comment-1026238, and read the thread so that you can determine what's going on. @ljm42 will help out if necessary when you post there. 1 Quote Link to comment
krazijoe Posted May 14, 2022 Share Posted May 14, 2022 Keep getting out of memory errors. Not sure why or what app/dock/plugin would be causing it. Any help would be appreciated. running 6.10.0-RC8 tower-diagnostics-20220514-1157.zip Quote Link to comment
mason1171 Posted May 17, 2022 Share Posted May 17, 2022 (edited) My extended FCP test is stuck. Despite killing the process with htop, FCP still says it is running. How do I fix this? Edited May 17, 2022 by mason1171 clarification Quote Link to comment
Squid Posted May 17, 2022 Author Share Posted May 17, 2022 It doesn't get stuck. It just takes absolutely forever on some systems. But, rm /tmp/fix.common.problems/extendedPID Quote Link to comment
mason1171 Posted May 18, 2022 Share Posted May 18, 2022 On 5/17/2022 at 7:46 AM, Squid said: It doesn't get stuck. It just takes absolutely forever on some systems. But, rm /tmp/fix.common.problems/extendedPID Gotchu. I guess I shouldn't have killed the process Quote Link to comment
dunnno Posted May 27, 2022 Share Posted May 27, 2022 Hi, I've been getting that error for some days now. Is it time to replace the flash drive ? Quote /boot/config/shares/Squidbait-vast.cfg corrupted Your flash drive has possible corruption on /boot/config/shares/Squidbait-vast.cfg. Diagnostic file attached. tower-diagnostics-20220527-1553.zip Quote Link to comment
Squid Posted May 31, 2022 Author Share Posted May 31, 2022 Just delete that file. It will be corrupted however, but if that's the only one listed, then don't worry about it. 1 Quote Link to comment
Squid Posted May 31, 2022 Author Share Posted May 31, 2022 Since I forgot to post about it, yesterday's update for the Upgrade Assistant tests for IOMMU enabled and the tg3 driver running, so that you can decide whether or not to upgrade to 6.10.2 Quote Link to comment
wopasaurus Posted June 1, 2022 Share Posted June 1, 2022 I just updated to 6.10.2, from 6.9.2 I got errors at first (once I was able to fix my docker not working, and that cache drive not being recognized, and there being syntax errors.... etc.....) that my flash drive error'd out, and was READ ONLY. This also caused Fix Common Problems to poop the bed super hard. Following the advice, got a new flash drive, transferred the key over.... FixCommonProblems still hates everything about me, and is throwing the same errors. Is this residual from the previous drive, or is there something in the way I have messed everything which basically wrecks whatever flash drive I put it on? Thanks a ton for all that you do. unraid-diagnostics-20220601-0830.zip Quote Link to comment
PhAzE Posted June 6, 2022 Share Posted June 6, 2022 (edited) Hey Squid, i'm getting what appears to be a false positive on a file i created on my USB: /boot/config/usb-rules.cfg corrupted Your flash drive has possible corruption on /boot/config/usb-rules.cfg. This is the contents of that file (which just maps the zwave and zigbee controller from my HUSBZ-1 to static device entities on boot): SUBSYSTEMS=="usb", DRIVERS=="cp210x", ATTRS{interface}=="HubZ Z-Wave Com Port", SYMLINK+="zwave" SUBSYSTEMS=="usb", DRIVERS=="cp210x", ATTRS{interface}=="HubZ ZigBee Com Port", SYMLINK+="zigbee" There doesn't appear to be any corruption in the file, i've recreated it just to be sure, so i'm thinking there is some sort of string of characters that the scan is detecting as corruption. Edited June 6, 2022 by PhAzE Quote Link to comment
southernclipper Posted June 8, 2022 Share Posted June 8, 2022 I had some errors with my hardware and now have Unraid 6.10.2 Stable again, but its show a corrupt file on my Boot USB drive. Not sure I can remove this and it will be recreated. Your flash drive has possible corruption on /boot/config/smart-one-backup.cfg. Post your diagnostics in the forum for more assistance. Diag attached. Any help would be greatly appericated. Thanks in Advance. unraid02-diagnostics-20220608-1624.zip Quote Link to comment
restjack Posted June 10, 2022 Share Posted June 10, 2022 Since updating to Unraid Version: 6.10.2 after along time of not updating. I have gotten the "Multiple NICs on the same IPv4 network" with the Fix Common Problems Plugin. However in my network settings its list only one network interface. (Screenshots are attached) Any suggestion you have to resolving this would be appreciated. This was the first time my unraid server has been restarted in some time since it has just been working perfectly since I applied the last update. I am also unable to use WireGuard now as it doesn't let me access the internet only the unraid server from the peer. This is probably tied to the same issue listed. Diagnostic report attached below tower-diagnostics-20220609-1700.zip Quote Link to comment
randommonth Posted June 10, 2022 Share Posted June 10, 2022 Hi guys, Fix Common Problems just told me that my /var/log is getting full (at 98%) and suggested I posted my diagnostics here for some advice on what may be the culprit. Any advice appreciated! bigdaddy-diagnostics-20220610-1529.zip Quote Link to comment
itimpi Posted June 10, 2022 Share Posted June 10, 2022 You seem to be getting continuous errors along the lines of Jun 10 05:33:01 BIGDADDY kernel: sd 2:0:0:0: [sdb] tag#12 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=DRIVER_OK cmd_age=0s Jun 10 05:33:01 BIGDADDY kernel: sd 2:0:0:0: [sdb] tag#12 CDB: opcode=0x2a 2a 00 0d f0 3f 60 00 00 40 00 Jun 10 05:33:01 BIGDADDY kernel: blk_update_request: I/O error, dev sdb, sector 233848672 op 0x1:(WRITE) flags 0x1800 phys_seg 6 prio class 0 Jun 10 05:33:01 BIGDADDY kernel: BTRFS warning (device sdd1): lost page write due to IO error on /dev/sdb1 (-5) ### [PREVIOUS LINE REPEATED 2 TIMES] ### Jun 10 05:33:01 BIGDADDY kernel: BTRFS error (device sdd1): error writing primary super block to device 2 Jun 10 05:33:03 BIGDADDY kernel: BTRFS warning (device sdd1): lost page write due to IO error on /dev/sdb1 (-5) which indicates that there are issues with your cache pool since the sdd and sdb devices belong to it. Not sure of the best way to proceed - maybe @JorgeB might have a view? Quote Link to comment
JorgeB Posted June 10, 2022 Share Posted June 10, 2022 2 hours ago, randommonth said: Any advice appreciated! One of the cache devices dropped offline: Jun 8 19:56:06 BIGDADDY kernel: ata1: hard resetting link Jun 8 19:56:12 BIGDADDY kernel: ata1: COMRESET failed (errno=-16) Jun 8 19:56:12 BIGDADDY kernel: ata1: reset failed, giving up Jun 8 19:56:12 BIGDADDY kernel: ata1.00: disabled Check/replace cables, also see here for better pool monitoring for the future. Quote Link to comment
pika Posted June 14, 2022 Share Posted June 14, 2022 (edited) i had a power failure and my backup n.u.t. didn't do its job properly so i had a hard shutdown 9 days ago. now i have the same error again /var/log is getting full (currently 100 % used) can't even download diagnostics o_O waiting for over 5 minutes now... guess i should reboot? already had the same problem some weeks ago. wasn't sure if i should've revived that topic or post here Edited June 14, 2022 by pika forgot diagnostics Quote Link to comment
pika Posted June 15, 2022 Share Posted June 15, 2022 I'm going to reboot now. log shows zillions lines like this: Jun 13 21:14:44 DataTower nginx: 2022/06/13 21:14:44 [crit] 7671#7671: ngx_slab_alloc() failed: no memory Jun 13 21:14:44 DataTower nginx: 2022/06/13 21:14:44 [error] 7671#7671: shpool alloc failed Jun 13 21:14:44 DataTower nginx: 2022/06/13 21:14:44 [error] 7671#7671: nchan: Out of shared memory while allocating channel /cpuload. Increase nchan_max_reserved_memory. Jun 13 21:14:44 DataTower nginx: 2022/06/13 21:14:44 [error] 7671#7671: *1773828 nchan: error publishing message (HTTP status code 507), client: unix:, server: , request: "POST /pub/cpuload?buffer_length=1 HTTP/1.1", host: "localhost" Jun 13 21:14:44 DataTower nginx: 2022/06/13 21:14:44 [crit] 7671#7671: ngx_slab_alloc() failed: no memory Jun 13 21:14:44 DataTower nginx: 2022/06/13 21:14:44 [error] 7671#7671: shpool alloc failed Jun 13 21:14:44 DataTower nginx: 2022/06/13 21:14:44 [error] 7671#7671: nchan: Out of shared memory while allocating channel /disks. Increase nchan_max_reserved_memory. Jun 13 21:14:44 DataTower nginx: 2022/06/13 21:14:44 [error] 7671#7671: *1773829 nchan: error publishing message (HTTP status code 507), client: unix:, server: , request: "POST /pub/disks?buffer_length=1 HTTP/1.1", host: "localhost" Jun 13 21:14:44 DataTower nginx: 2022/06/13 21:14:44 [crit] 7671#7671: ngx_slab_alloc() failed: no memory Jun 13 21:14:44 DataTower nginx: 2022/06/13 21:14:44 [error] 7671#7671: shpool alloc failed Jun 13 21:14:44 DataTower nginx: 2022/06/13 21:14:44 [error] 7671#7671: nchan: Out of shared memory while allocating channel /var. Increase nchan_max_reserved_memory. Quote Link to comment
Jaybau Posted June 16, 2022 Share Posted June 16, 2022 Does the plugin also inform the user of best practices to prevent common problems? For example: UPS (and configured correctly) Dynamix File Integrity plugin (installed and scheduled) ECC Memory Not sure if I'm missing anything else. Maybe potential filesystem issues (btrfs vs. xfs recommenations). Quote Link to comment
Squid Posted June 17, 2022 Author Share Posted June 17, 2022 15 hours ago, Jaybau said: Does the plugin also inform the user of best practices to prevent common problems? No - It's a bit out of the realm of what FCP is supposed to do, and not particularly feasible and would be annoying, and there's many counter arguments against all of those examples. Quote Link to comment
randommonth Posted June 28, 2022 Share Posted June 28, 2022 (edited) Hi guys, following up since my post on June 10 (above). I deleted the docker image and changed to a docker directory. However I just received the same error warning about /var/log filling. It appears I'm getting the same errors as last time, and checking the tip provided by Jorge provides the following: [/dev/sdd1].write_io_errs 0 [/dev/sdd1].read_io_errs 0 [/dev/sdd1].flush_io_errs 0 [/dev/sdd1].corruption_errs 0 [/dev/sdd1].generation_errs 0 [/dev/sdb1].write_io_errs 17381866 [/dev/sdb1].read_io_errs 1092081 [/dev/sdb1].flush_io_errs 615464 [/dev/sdb1].corruption_errs 885679 [/dev/sdb1].generation_errs 0 The strange thing here is that sdd1 is an old SSD (6 years?) and old cable, whilst sdb1 is less than a month old, with a new cable. What could cause the new components to have the errors? bigdaddy-diagnostics-20220628-1457.zip Edited June 28, 2022 by randommonth Revised the request Quote Link to comment
JorgeB Posted June 28, 2022 Share Posted June 28, 2022 4 hours ago, randommonth said: What could cause the new components to have the errors? Device is dropping offline, this is usually a power/connection problem, suggest replacing/swapping both cables, power and SATA. Quote Link to comment
Digaumspider Posted July 4, 2022 Share Posted July 4, 2022 I've been getting an error message daily of a plugin not being compatible with unraid 6.10, but it's still working just fine, while I wait for the update. Any way to suppress only this message? "* docker.folder.plg Not Compatible with Unraid version 6.10.3" Thanks! Quote Link to comment
wgstarks Posted July 4, 2022 Share Posted July 4, 2022 17 minutes ago, Digaumspider said: I've been getting an error message daily of a plugin not being compatible with unraid 6.10, but it's still working just fine, while I wait for the update. Any way to suppress only this message? "* docker.folder.plg Not Compatible with Unraid version 6.10.3" Thanks! Click ignore. Quote Link to comment
Digaumspider Posted July 5, 2022 Share Posted July 5, 2022 11 hours ago, wgstarks said: Click ignore. Thanks. I was referring to the emails, but I accessed the fix common problems plugin area and clicked ignore on that warning. Cheers! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.