tillkrueger Posted November 7, 2018 Share Posted November 7, 2018 indeed it does...I can see clearly now, thank you! the whole ending section is about permissions problems...is there an automated method for making sure *all* files get correct permissions? Quote Link to comment
wgstarks Posted November 7, 2018 Share Posted November 7, 2018 36 minutes ago, tillkrueger said: indeed it does...I can see clearly now, thank you! the whole ending section is about permissions problems...is there an automated method for making sure *all* files get correct permissions? Tools>docker safe new permissions You may need to install via CA if you haven’t already. 1 Quote Link to comment
tillkrueger Posted November 7, 2018 Share Posted November 7, 2018 No, I do have it, but I'll wait until a move operation is finished...don't wanna compound the issue. thanks! Quote Link to comment
tillkrueger Posted November 9, 2018 Share Posted November 9, 2018 finally got a chance to run "docker safe permissions" and it did indeed fix my issues with not being able to move certain files between disk shares...worked like a charm. Thanks, wgstarks! Quote Link to comment
pappaq Posted November 25, 2018 Share Posted November 25, 2018 (edited) Hello there, the plugin is hanging at scanning my system and I can't alter the properties. Does anyone have a clue? Edited November 25, 2018 by pappaq Quote Link to comment
Squid Posted November 25, 2018 Author Share Posted November 25, 2018 Due to the nature of unRaid 6.6, on any of the pop-ups that look like that one if the process does not complete in 120 seconds then it will never close automatically. Close the browser window and then re-open it and the list will probably be populated 1 Quote Link to comment
pappaq Posted November 25, 2018 Share Posted November 25, 2018 11 minutes ago, Squid said: Due to the nature of unRaid 6.6, on any of the pop-ups that look like that one if the process does not complete in 120 seconds then it will never close automatically. Close the browser window and then re-open it and the list will probably be populated Didn't work, but with another browser I was able to disable the scan for spun down disks. That was all that I wanted. It can scan and notify me in the background now. Thanks anyway. Quote Link to comment
Squid Posted November 25, 2018 Author Share Posted November 25, 2018 1 minute ago, pappaq said: another browser What is the original browser? Quote Link to comment
pappaq Posted November 25, 2018 Share Posted November 25, 2018 5 minutes ago, Squid said: What is the original browser? Maybe I should give you a little bit more background information. The original browser is Chrome and the browser I could make the change with is Opera, but I was only able to change the setting due to the popup not initially showing up. After I changed it the popup appeared and it didn't disappeared like in chrome. Maybe I uninstall the plugin until later releases. Quote Link to comment
Squid Posted November 25, 2018 Author Share Posted November 25, 2018 1 minute ago, pappaq said: Maybe I uninstall the plugin until later releases. While changing around how the popup works (to avoid the 120second thing) is on the todo list, it is definitely not a high priority. It should complete within about 10 seconds tops, unless you've got tons and tons of drives and they are all spun down and the cumulative time to spin them up sequentially exceeds 120 seconds. TLDR: Don't expect an update anytime soon 1 Quote Link to comment
pappaq Posted November 25, 2018 Share Posted November 25, 2018 28 minutes ago, Squid said: While changing around how the popup works (to avoid the 120second thing) is on the todo list, it is definitely not a high priority. It should complete within about 10 seconds tops, unless you've got tons and tons of drives and they are all spun down and the cumulative time to spin them up sequentially exceeds 120 seconds. TLDR: Don't expect an update anytime soon This is not the case. I don't know what is causing this behaviour and at the moment I am too lazy to get to the bottom of it. I will let the addon run like this for now. The option I wanted to set is now set and the rest works. It's not that bad that it doesn't have a high priority. I can wait. Many thanks for the quick answers and on a Sunday! Have a nice weekend! Quote Link to comment
mattekure Posted November 30, 2018 Share Posted November 30, 2018 Overnight I began receiving this error about communicating with github and being unable to download the list of blacklisted plugins. I am using the google DNS and I am able to browse github without issue from my browser. I also tested pinging github and got a response fine, so I'm not sure whats going on. I've attached diagnostics if its helpful. tower-diagnostics-20181130-0721.zip Quote Link to comment
ffhelllskjdje Posted November 30, 2018 Share Posted November 30, 2018 10 minutes ago, mattekure said: Overnight I began receiving this error about communicating with github and being unable to download the list of blacklisted plugins. I am using the google DNS and I am able to browse github without issue from my browser. I also tested pinging github and got a response fine, so I'm not sure whats going on. I've attached diagnostics if its helpful. tower-diagnostics-20181130-0721.zip same issue here Quote Link to comment
axipher Posted November 30, 2018 Share Posted November 30, 2018 23 minutes ago, mattekure said: Overnight I began receiving this error about communicating with github and being unable to download the list of blacklisted plugins. I am using the google DNS and I am able to browse github without issue from my browser. I also tested pinging github and got a response fine, so I'm not sure whats going on. I've attached diagnostics if its helpful. tower-diagnostics-20181130-0721.zip Same issue here. Also: - Ping github works - traceroute github works - I was able to install a new random app from the community apps tab Quote Link to comment
Squid Posted November 30, 2018 Author Share Posted November 30, 2018 Typo on my part when doing maintenance on CA. All fixed up now. Quote Link to comment
jus7incase Posted December 1, 2018 Share Posted December 1, 2018 (edited) Dear all if I understand correctly the "Docker Safe New Perms" is installed by the plugin "Fix Common Problems", so I post my problem here. I have run Docker Safe New Perms on all disks except for the Cache disk (nothing to be moved). Then I wanted to use unBalance to move the content of one disk to another disk. During the planning phase unBalance would complain that it found directories with improper permissions and I shall run "Docker Safe New Perms". So how can this be since I did run "Docker Safe New Perms" in advance. It turns out that unBalance considers existing Set-U-ID oder Set-G-ID bits as problematic, and "Docker Safe New Perms" does not clear out these bits. I do not know whether these bits are actually a real problem for the unBalance procedure. But if they are, then "Docker Safe New Perms" should remove those bits, e.g. by setting the permissions to 00777. (Note the leading 2 zeroes! Yes this is correct, with just one zero it will NOT clear those bits!) This can be done manually as long as "Docker Safe New Perms" does not do it: find /mnt/disk?/ -type d -and -not -perm 0777 -exec chmod 00777 {} \; However, if those bits do not create a problem with the unBalane procedure, the unBalance should not report them as an issue. if you search like this, you will find the directories where SUID or SGID are set: find /mnt/disk?/ -type d -and -not -perm 0777 This is not what we want if we do not want to report those directories. Instead it should be used: find /mnt/disk?/ -type d -and -not -perm -0777 Note the "-" (minus) character in front of the 0777. Now additional bits being set will not be reported! It would be great to get feedback from the author of unBalance whether these bits should be cleared or whether the should rather not be reported. In the first case it would be good to get feedback from the author of the plugin "Fix Common Problems" whether clearing of the SUID SGID bit for directories can/will be implemented. I am going to cross-link both postings in both support threads. unBalance support thread: Edited December 1, 2018 by jus7incase Quote Link to comment
Squid Posted December 1, 2018 Author Share Posted December 1, 2018 All docker safe new perms is is a wrapper for the stock new perms script (tools - new perms) that runs it against every share except for your appdata share The script itself is function process { list="$1" [[ $# -ge 2 ]] && owner=$2 || owner=nobody [[ $# -ge 3 ]] && group=$3 || group=users ifs=$IFS; IFS='|' for dir in $list; do echo "$dir" if [[ -d $dir ]]; then echo processing "$dir" echo ... chmod -R u-x,go-rwx,go+u,ugo+X "$dir" chmod -R u-x,go-rwx,go+u,ugo+X "$dir" echo ... chown -R $owner:$group "$dir" chown -R $owner:$group "$dir" echo ... sync sync fi done IFS=$ifs } Quote Link to comment
bigbadblo Posted December 21, 2018 Share Posted December 21, 2018 Running into issues today with FCP -- my error log states that I'm experiencing connection time outs. The only thing I've changed to my system is installing a dockerized version of pihole in the past week. Could this be causing the error? Dec 21 14:28:47 Tower root: Fix Common Problems Version 2018.12.07 Dec 21 14:30:47 Tower nginx: 2018/12/21 14:30:47 [error] 13756#13756: *21253 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 192.168.1.11, server: , request: "POST /plugins/fix.common.problems/include/fixExec.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock", host: "192.168.1.16", referrer: "http://192.168.1.16/Settings/FixProblems" Thanks for any insight. Quote Link to comment
Archivist Posted December 27, 2018 Share Posted December 27, 2018 Hey Squid, I have a conundrum (great 2bit word). My Backup Server is running on 6.3.5 but can't update. Reading the posts, I need to install CA-Fix Common Problems to eliminate issues prior to the update. That requires CA-Community Applications, which could not be updated as the OS was too low, so was removed. Without Community Applications, I cannot install Fix Common Problems (duh)! I've searched everywhere for the URL for Fix Common Problems, but everything points back to this thread and Community Applications. HELP! I'm Stuck! Dave (Best Wishes for a Happy 2019 New Year) Quote Link to comment
trurl Posted December 27, 2018 Share Posted December 27, 2018 24 minutes ago, Archivist said: I need to install CA-Fix Common Problems to eliminate issues prior to the update. Do you think you have issues? Have you read the Update Notes? Quote Link to comment
Archivist Posted December 28, 2018 Share Posted December 28, 2018 Yes, I did thanks, but therein lies the problem! Without your suggested Fix Common Problems first (which I can't find the URL for w/o Community Applications which is not loaded, hence no Apps to Search), I can't clean the system prior to updating to 6.4 or later so the current Community Applications suite will load. Quote Link to comment
Squid Posted December 28, 2018 Author Share Posted December 28, 2018 URL for FCP https://raw.githubusercontent.com/Squidly271/fix.common.problems/master/plugins/fix.common.problems.plg Quote Link to comment
Archivist Posted December 28, 2018 Share Posted December 28, 2018 5 hours ago, Squid said: URL for FCP https://raw.githubusercontent.com/Squidly271/fix.common.problems/master/plugins/fix.common.problems.plg Many Many Thanks! D Quote Link to comment
thomashp Posted January 6, 2019 Share Posted January 6, 2019 Love the plugin. I've used to to identify and fix many issues with my server. The one thing I would like to be able to do is disable the Alerts generated when there is an update to the plug-in. I feel this should be a settable option or at the very least it should be a warning and not an alert. It is super annoying to see that there are 5 alerts on my server and they are all update notifications for this plug-in. Quote Link to comment
Squid Posted January 6, 2019 Author Share Posted January 6, 2019 (edited) Add to ignore list. And, IMHO if you're using FCP, then it being out of date is an error as you're going to be missing out on fixes, new errors / warnings / etc. Edited January 6, 2019 by Squid Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.