Conson Droppa Posted October 4, 2019 Share Posted October 4, 2019 ahhh...ok...was the script separate from the install or something? I don't recall. Been a while. Where do I remove it from? It was a separate thing. You only need to remove it if you added it to the User Scripts Plugin. Plex did encoding already. So decoding of the video and transcoding of the audio was still done by the CPU. The script passed the task of video decoding to the GPU. Leaving only audio to the CPU. Thus, script no longer needed. If you never added the script to the script plugin, have a great day. Sent from my iPhone using Tapatalk Link to comment
Conson Droppa Posted October 6, 2019 Share Posted October 6, 2019 (edited) Please don't jump my a$$ for this. I read all 46 pages of this thread and it taught me a lot of information and I can't remember all of it. I know it was talked about and asked somewhere in here. I see there is a somewhat newer Handbrake container in the CA store by djaydev which has paths for GPU info. I would love to offload my h265 transcoding to the GPU. Can you pass the same GPU to multiple dockers successfully? Or at least point me to the post where it is discussed. Edited October 6, 2019 by rmeaux Link to comment
saarg Posted October 6, 2019 Share Posted October 6, 2019 1 hour ago, rmeaux said: Please don't jump my a$$ for this. I read all 46 pages of this thread and it taught me a lot of information and I can't remember all of it. I know it was talked about and asked somewhere in here. I see there is a somewhat newer Handbrake container in the CA store by djaydev which has paths for GPU info. I would love to offload my h265 transcoding to the GPU. Can you pass the same GPU to multiple dockers successfully? Or at least point me to the post where it is discussed. Yes, you can use the same GPU in different containers. Link to comment
drzaph Posted October 8, 2019 Share Posted October 8, 2019 What are the steps to get an NVIDIA card working with Plex docker with the recent PMS changes (v1.17)? Thanks. Link to comment
jpowell8672 Posted October 8, 2019 Share Posted October 8, 2019 3 minutes ago, drzaph said: What are the steps to get an NVIDIA card working with Plex docker with the recent PMS changes (v1.17)? Thanks. 1 1 Link to comment
drzaph Posted October 8, 2019 Share Posted October 8, 2019 Thanks for the video. SpaceInvader1's videos are incredible. I was only asking if instructions like his have changed with the new PMS? Link to comment
Cessquill Posted October 9, 2019 Share Posted October 9, 2019 14 hours ago, drzaph said: Thanks for the video. SpaceInvader1's videos are incredible. I was only asking if instructions like his have changed with the new PMS? You just don't need to run any additional optional script to get decoding working as that's now baked in; the original instructions are all you need. Link to comment
sittingmongoose Posted October 11, 2019 Share Posted October 11, 2019 Any prayer to get 6.8 rc1 in the Nvidia plug-in? A lot of people are desperate for 6.8 because it fixes the array slowness issue. Link to comment
BRiT Posted October 11, 2019 Share Posted October 11, 2019 Give it some time. It takes hours of work to get each new version ready for distribution. 1 Link to comment
sittingmongoose Posted October 11, 2019 Share Posted October 11, 2019 19 minutes ago, BRiT said: Give it some time. It takes hours of work to get each new version ready for distribution. I was only asking because we don't normally get the plugin for rc releases. This is just an important one. And I have been waiting for this release for like 2 months lol Im itching to try it!! I want to be able to download and watch at the same time again lol Link to comment
IamSpartacus Posted October 12, 2019 Share Posted October 12, 2019 Last I heard the team was having issues with the latest linux kernels and that's so idk how quick this one will get released. Link to comment
Dazog Posted October 12, 2019 Share Posted October 12, 2019 They already released it. WOW. You guys are awesome! Link to comment
sittingmongoose Posted October 12, 2019 Share Posted October 12, 2019 Hot damn! Thank you guys!!! Ill update tomorrow morning Link to comment
jpowell8672 Posted October 12, 2019 Share Posted October 12, 2019 Thank You @linuxserver.io on the quick release! Link to comment
Pducharme Posted October 12, 2019 Share Posted October 12, 2019 Tried the 6.8.0rc1 Unraid-Nvidia... No network anymore I have a ryzen 9 3900x on a ASUS WS X570-Pro motherboard. I'll check if I can again delete the .cfg and retry. Link to comment
Pducharme Posted October 12, 2019 Share Posted October 12, 2019 @CHBMB How can I put stable 6.7.2 UNRAID-NVIDIA without using the GUI ? if I boot, I don't get network with 6.8.0rc1, so I can't select a different version. I would like to just overwrite files on my USB key from a windows machine to go back to previous version... ? Link to comment
Squid Posted October 12, 2019 Share Posted October 12, 2019 16 minutes ago, Pducharme said: How can I put stable 6.7.2 UNRAID-NVIDIA without using the GUI Boot into GUI mode? Or, download the 6.7.2 zip from limetech's website and overwrite the bz* files on the flash, and when booted back up in the plugin settings install 6.7.2 Nvidia Link to comment
Pducharme Posted October 12, 2019 Share Posted October 12, 2019 2 minutes ago, Squid said: Boot into GUI mode? Or, download the 6.7.2 zip from limetech's website and overwrite the bz* files on the flash, and when booted back up in the plugin settings install 6.7.2 Nvidia I had to download official from Limetech, because even from GUI, no network... Now retrying 6.8.0rc1 to see. Link to comment
Pducharme Posted October 12, 2019 Share Posted October 12, 2019 Ok. 6.8.0rc1 NVIDIA build, I loose Network. 6.7.2 Official, Network works, 6.7.2 NVIDIA build, Network works too. So, it seems that 6.8.0rc1 doesn't include the X570's boards NIC card driver (?), strange. Link to comment
jpowell8672 Posted October 12, 2019 Share Posted October 12, 2019 4 minutes ago, Pducharme said: Ok. 6.8.0rc1 NVIDIA build, I loose Network. 6.7.2 Official, Network works, 6.7.2 NVIDIA build, Network works too. So, it seems that 6.8.0rc1 doesn't include the X570's boards NIC card driver (?), strange. From 6.8rc1 release notes: Some out-of-tree (oot) drivers are currently omitted either because the source code doesn't compile or driver doesn't work with the 5.3 kernel: Intel ixgbe [does not build] (using in-tree driver) Highpoint r750 [does not work] Highpoint rr3740a [does not build] This is always the risk with including vendor-supplied drivers. Until the vendor fixes their code we must omit their driver. Possibly the above driver is your problem: Intel ixgbe [does not build] (using in-tree driver) Link to comment
Pducharme Posted October 12, 2019 Share Posted October 12, 2019 (edited) 7 minutes ago, jpowell8672 said: From 6.8rc1 release notes: Some out-of-tree (oot) drivers are currently omitted either because the source code doesn't compile or driver doesn't work with the 5.3 kernel: Intel ixgbe [does not build] (using in-tree driver) Highpoint r750 [does not work] Highpoint rr3740a [does not build] This is always the risk with including vendor-supplied drivers. Until the vendor fixes their code we must omit their driver. Possibly the above driver is your problem: Intel ixgbe [does not build] (using in-tree driver) definately the issue! : My Ethernet is : PCI device 0x8086:0x1539 (igb) (igb, I suppose it's Intel ixgbe?) EDIT: Oh, no it's 10G card, my Intel Card is only a 1G card... Anyway, back on the 6.7.2 stable UNRAID build and will wait for other people to try the next rc of 6.8.x Edited October 12, 2019 by Pducharme Link to comment
glennv Posted October 12, 2019 Share Posted October 12, 2019 ouch, hope thats just temporary rc thingy as loosing my 10gb card for unraid is a nogo. Am sure i am not alone Link to comment
CHBMB Posted October 12, 2019 Share Posted October 12, 2019 You guys need to test the actual v6.8.0rc1 release and report a bug. Sent from my Mi A1 using Tapatalk 1 Link to comment
linuxserver.io Posted October 12, 2019 Author Share Posted October 12, 2019 Actually I'm going to pull this release. I did miss some OOT drivers, misread things last night, had another look this morning. But.... none of the OOT drivers I miss look like they're involved with Intel networking. ETA - Dunno, need to talk to LT about their OOT Unraid driver. 1 Link to comment
Viperkc Posted October 12, 2019 Share Posted October 12, 2019 I pulled it a couple of times actually. I think Fuse was left out which caused my rclone to stop working. I realize this is nothing to do with Nvidia plugin. Fusermount completely missing from /bin. Each time i reverted back to 6.7 all worked fine and it was there again. Thanks for your very fast release. Maybe i can help test it on the next release. Link to comment
Recommended Posts